How to send a message to WD from a BPM?

Hi All,
I have a ccBPM in which I recieve a binary file .
On receiving it I want :
1)To send it to a folder in my pc.
2)After sending file I need to send a message to WD giving path of file on my system so that it can be UPLOADED to the context.
Please help !
Points assured for helpful answers!
Sumit

HI,
See the below links
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC  - File to Mail
/people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally - Maintain RFC destination centrally
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
Troubleshooting - RFC and SOAP scenarios-/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009
XI: RFC or ABAP Proxy ? ....ABAP Proxies with attachments --/people/michal.krawczyk2/blog/2006/04/19/xi-rfc-or-abap-proxy-abap-proxies-with-attachments
RFC -> XI -> WebService - A Complete Walkthrough (Part 2) -/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
RFC to SOAP
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/piers.harding/blog/2004/07/18/you-dont-need-to-use-soap-to-keep-your-rpc-clean
/people/david.halitsky/blog/2006/08/25/soa-vs-rfc-it-doesnt-have-to-be-charles-bronson-vs-henry-fonda
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=rfc%20to%20soap%20scenario&cat=sdn_weblog
Regards
Chilla
<i>reward points if it is helpful..</i>

Similar Messages

  • How to send error message to forms from Database Trigger

    Hi, Please help me to send error message to forms from Database Trigger?
    RgDs,
    Madesh.R.M

    You are correct, the On-Error trigger is a Forms trigger. However, if your Form is going to display the error generated by the database stored procedure or trigger - you might not see the database error in your Form unless you check the DBMS_ERROR_CODE in the On-Error trigger and manually display the Error Code and associated Text. I've see this happen with a co-worker. The Form she was working on was based on a table with an Before-Insert trigger. Because she was not explicitely handling the error from the Before-Insert trigger in the Forms On-Error trigger, her Form appeared to halt for no reason at all. Once she added code to the On-Error trigger in the Form to handle the DBMS_ERROR_CODE, she discovered the trigger was producing an error and was able to show the error to the user in the On-Error trigger.
    I understand the desire to keep as much as possbile in the database, but with that comes some extra coding in your Forms to handle this. This extra coding could easily be placed in a Forms Library, attached to a Form and called in the On-Error trigger. Your code could look like this:
    DECLARE
       /*This example assumes you have an Alert defined
          in your Form called: 'ERROR' */  
       al_id    ALERT;
       al_text  VARCHAR2(200);  /* Max text of a Forms Alert message*/
       al_btn   NUMBER;
    BEGIN
    IF DBMS_ERROR_CODE != 0 THEN
       /* Error code is ORA-00000 Normal Successful completion
           So only handle non-zero errors  */
       al_text := DBMS_ERROR_CODE||':'||DBMS_ERROR_TEXT;
       al_id := Find_Alert('ERROR');
       set_alert_property(al_id, alert_message_text, al_text);
       al_btn := show_alert(al_id);
    END IF;
    END;Your original question was "How to send error message to forms from Database Trigger?" The answer is you don't because Forms already gets the database error code and database message through the Forms DBMS_ERROR_CODE and DBMS_ERROR_TEXT functions. Look these up in the Forms help and it should clear things up for you.
    Craig...
    Edited by: CraigB on Jun 14, 2010 4:49 PM
    Edited by: CraigB on Jun 14, 2010 4:49 PM
    Edited by: CraigB on Jun 14, 2010 4:50 PM
    Edited by: CraigB on Jun 14, 2010 4:51 PM
    Edited by: CraigB on Jun 14, 2010 4:51 PM

  • How to send a message(apple event) from mac os to our application

    on developer.apple.com i found a method which opens a given documetns through an apple event.
    my question is how to send open document event from mac to our application on xcode

    Assuming you're using Cocoa, the simplest solution is to call -[NSWorkspace openFile:withApplication:]. Example:
    NSWorkspace *ws = [NSWorkspace sharedWorkspace];
    NSString *appPath = [ws absolutePathForAppBundleWithIdentifier: @"com.apple.textedit"];
    [ws openFile: @"/path/to/file" withApplication: appPath];

  • How to send short message services(SMS) from PC desktop to Mobile  with the

    sir, i want to know " how we can send the free SMS from PC desktop to Mobiles? this is my project part of final year project and till now i m in confusion. what r the various tools and technologies will be in used for implementing the SMS system. In fact, i m a new user of wireless java. so, pls give ur valuable hands for this topic.

    First of all PC as a "stand-alone" machine does not have ablity to send SMS since there is no necessary hardware in it. You can achive this in two ways: first, connect your mobile (method depends on model) to PC and use it to send SMS. Ofcourse it won't be for free - mobile owner will have to pay for it. Second way involves using so called "SMS gateway" provided by GSM suppliers via internet. Most of them, at least in Poland, are well protected against using by machines.
    This is all I know about it. Hope it helped in some way

  • How to send big message one bye one without bpm in PI 7.0

    Hi frnds,
    I have to send a big messages one by one to the CRM, without using BPM.
    Can you please suggest us some way around, the data is going to CRM via proxy and at the sender side we are using file content conversion which we don't want to change.
    Please let me know some better idea and if possible some related example as well.
    Thanks,
    Raj

    Hi,
    You have two options
    1)Split the message and then send
    2)Use Record set per message option in File Sender adapter,there give value 20 or any number..then it takes 20 records at a time will send to receiver.
    BPM is not option,even if you use BPM ,its not going to solve your problem..
    Regards,
    Raj

  • How to send a message to a Facebook friend from shortcut of messages in notification center

    i tried to send a message to a facebook friend from the shortcut of messages like facebook post or twitter tweat option in notification center but i couldn't i thought there may be something else which i need to do before sending a message to anyone from facebook is there something i need to get done before i can a message to a facebook friend ???

    Hi,
    I take it you have a Jabber account set up in Messages ?
    A Google Mail ID can access Google talk which is a Jabber Server and if you have Enabled "Chat" at Facebook you will have a Facebook chat ID that can be used in Messages as they too run a Jabber server.
    Of course these are just two of many Jabber and compatible XMPP servers.
    I don't have Facebook or Twitter but I did use the Menu bar icon for Notifications  and clicked Messages and Sent a Messages to one of my Jabber IDs (it logged me in and sent it from my Google one).
    In the System Preferences > Notifications I do have Share Button set (Messages only).
    9:04 pm      Saturday; May 10, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • How to send a message to a pager? URGENT

    Hi everybody
    I wanna know how to send a message (or a caller's number) to a pager from Form.

    Hi,
    if you can find a public Webservice on the Web that provides this functionality, you could use JDeveloper and the Forms Java Importer to call it from Forms.
    JDeveloper is helpful in creating the Java skeletton to communicate with the Webservice. As similar issue is covered in teh Forms9i demos by the example of a currency converter.
    Frank

  • Best Practices Question: How to send error message to SSHR web page.

    Best Practices Question: How to send error message to SSHR web page from custom PL\SQL procedure called by SSHR workflow.
    For the Manager Self-Service application we’ve copied various workflows which were modified to meet business needs. Part of this exercise was creating custom PL\SQL Package Procedures that would gather details on the WF using them on custom notification sent by the WF.
    What I’m looking for is if/when the PL\SQL procedure errors, how does one send an failure message back and display it on the SS Page?
    Writing information into a log or table at the database level works for trouble-shooting, but we’re looking for something that will provide the end-user with an intelligent message that the workflow has failed.
    Thanks ahead of time for your responses.
    Rich

    We have implemented the same kind of requirement long back.
    We have defined our PL/SQL procedures with two OUT parameters
    1) Result Type (S:Success, E:Error)
    2) Result Message
    In the PL/SQL procedure we always use below construct when we want to raise any message
    hr_utility.set_message(APPL_NO, 'FND_MESSAGE_NAME');
    hr_utility.raise_error;
    In Exception block we write below( in successful case we just set the p_result_flag := 'S';)
    EXCEPTION
    WHEN APP_EXCEPTION.APPLICATION_EXCEPTION THEN
    p_result_flag := 'E';
    p_result_message := hr_utility.get_message;
    WHEN OTHERS THEN
    p_result_flag := 'E';
    p_result_message := hr_utility.get_message;
    fnd_message.set_name('PER','FFU10_GENERAL_ORACLE_ERROR');
    fnd_message.set_token('2',substr(sqlerrm,1,200));
    fnd_msg_pub.add;
    p_result_message := fnd_msg_pub.get_detail;
    After executing the PL/SQL in java
    We have written some thing similar to
    orclStmt.execute();
    OAExceptionUtils.checkErrors (txn);
    String resultFlag = orclStmt.getString(provide the resultflag bind no);
    if ("E".equalsIgnoreCase(resultFlag)){
    String resultMessage = orclStmt.getString(provide the resultMessage bind no);
    orclStmt.close();
    throw new OAException(resultMessage, OAException.ERROR);
    It safely shows the message to the user with all the data in the page.
    We have been using this construct for a long time for all our projects. They are all working as expected.
    Regards,
    Peddi.

  • I need to send a message via socket from a C program to a Java program

    Hi,
    I need to send a message via socket from a C program to a Java program. The message has three data: a long, an integer and a string.
    How can I put those three fields in a array of bytes in C? How can I extract those same three fields from an array of bytes in java?
    Thanks a lot!

    A few options:
    JNI
    Corba
    Using sockets directly
    take your pick.

  • How to Send the material master data from sap4.6c to ECC6.0

    Hi
        Friends this is shalini Shah, i got one requirement that is
    how to send the materail master data  from SAP 4.6C to ECC6.0 using XI.
    i  know the file to idoc and idoc to file scenarios but i don't know this one.
    please help me friends, Thanks in advance.
    Regards
    Shalini Shah

    Hi Shalini,
    To trigger IDoc these configurations should be done in the SAP 4.6, XI and ECC 6.0.
    SAP XI
    1) RFC Destination (SM59)
    a) Choose create.
    b) Specify the name of the RFC destination
    c) Select connection type as 3 and save
    d) In the technical settings tab enter the details SAP SID/URL and system number#.
    e) Enter the Gateway host as same details above SID/URL.
    f) Gateway service is 3300+system number#.
    g) In the Logon /Security tab, enter the client user & Password details of Destination system.
    h) Test the connection and remote logon.
    2) Create Port (IDX1)
    a) Select create new button
    b) Enter the port name as SAP+SID (The starting char should be SAP)
    c) Enter the destination client.
    d) Enter the RFC Destination created in SAP R/3 towards other system.
    e) Save
    3) Load Meta Data for IDOC (IDX2)
    a) Create new
    b) IDOC Message Type
    c) Enter port created in IDX1.
    SAP R/3 (4.6 and ECC 6.0)
    1) RFC Destination (SM59)
    a) Choose create.
    b) Specify the name of the RFC destination
    c) Select connection type as 3 and save
    d) In the technical settings tab enter the details SAP SID/URL and system number#.
    e) Enter the Gateway host as same details above SID/URL.
    f) Gateway service is 3300+system number#.
    g) In the Logon /Security tab, enter the client user & Password details of Destination system.
    h) Test the connection and remote logon.
    2) Create Port (We21)
    a) First Select Transactional RFC and then click create button
    b) Enter the destination port name as SAP+SID (The starting char should be SAP)
    c) Enter the destination client.
    d) Enter the RFC Destination created in SAP R/3 towards other system.
    e) Save
    3) Create Partner Profile (WE20)
    a) Create New
    b) Create the Partner no. name as same the logical system name of the destination system.
    c) Select Partner type LS
    d) Enter details for Type: US/USER, Agent, and Lang.
    e) Click on the + button to select the message type.
    f) Select Partner no. and LS which ever create above.
    g) Select Message type
    h) Select Process code related to the Message type.
    I) save.
    Also go ther the Blog <a href="/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi Configuration for Pushing IDOC's from SAP to XI</a> By Swaroopa Vishwanath
    U need to import the IDoc types both inbound and outbound to XI.
    1. Create Inbound and Outbound Message interface.
    2. Do one to one message mapping.
    3. Define an Interface mapping.
    ID:
    1. Create 1 Sender aggrement.
    2. Create 1 Receiver aggrement.
    3. Define 1 RD and ID.
    4. Only create an receiver IDoc CC.
    Regards
    San
    <a href="Remember to set the thread to solved when you have received a solution to set the thread to solved when you have received a solution</a>
    Where There is a <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/weblogs?blog=/weblogs/topic/16">blog</a> there is a Way.

  • Could you some one help me how to send a message on twitter using Oracle SOA?

    Hi Team,
              I am trying to send a message from Oracle SOA to Twitter, But i am not able to do the scenario.Could you some one help me how to send a message on twitter using Oracle SOA?
    Regards,
    Kiran

    Very challenging and doubtful at the same time !
    I don't think, its going to be a straight-forward one... Read about OAuth twitter authentication, before you try to post tweets.

  • HT4111 how to send a message using bluetooth keyboard in imessage

    is there any way to send a message in iMessage from my iPad mini using the bluetooth keyboard?

    I've got it connected and everything, but I want to know how I actually send the written txt without tapping "send" on the iPad. Is there any way to do it from the keyboard? Hitting "enter" just takes the cursor down to the next line.

  • Tutorial announcement :: How to send a message(s) with attachments ::

    How to send a message with attachments Using Adobe Dreamweaver CS3 and Developer Toolbox...
    - In this tutorial you will use Developer Toolbox features to build a simple contact us form with the advantage to upload file with your message and send this file via e-mail as an attachments.
    Using This application will allow to:
    * insert records into database and then send them via e-mail.
    * upload files to the server.
    * send message with uploaded files as attachments.
    This tutorial contains one part
    1. insert record, and then send it by email with (attachments).
    By following this tutorial section, you will create:
    * Page for inserting records.
    * Page for thank you when the message is sent.
    :: To View the tutorials ::
    :: Online Demo ::
    Brought t you by:
    www.developer-online.com

    Open the photo, assuming it is in Photos, and then in the lower left corner under the photo is a box with an up-pointing arrow.  Tap that box, and then the photo will have a blue circle with a checkmark in its lower right corner and the word Next at the upper right.  Tap Next, then choose how you want to send the photo, by text message, email, and so on.  Simply address the method you have chosen and put in any text you want to include.

  • How to send active links in email from firefox. Works in IE but not Firefox... Is there a setting to change?

    how to send active links in email from firefox. Works in IE but not Firefox... Is there a setting to change?
    == This happened ==
    Every time Firefox opened
    == Always

    Check with your web mail service provider for help with that issue.

  • How to send a message with a photo to a company?

    I AM S DISABLED SENIOR WITH SHORT-TERM MEMORY. PLEASE TELL ME HOW TO SEND A MESSAGE AND INCLUDE A PHOTO I HAVE ON MY i-PHONE 5S?
    THANK YOU IN ADVANCE FOR THE ASSISTANCE.
    FLIGHTLEADER-1

    Open the photo, assuming it is in Photos, and then in the lower left corner under the photo is a box with an up-pointing arrow.  Tap that box, and then the photo will have a blue circle with a checkmark in its lower right corner and the word Next at the upper right.  Tap Next, then choose how you want to send the photo, by text message, email, and so on.  Simply address the method you have chosen and put in any text you want to include.

Maybe you are looking for