How to send ALV report by email, in the body of the email?
Hello friends,
I need to send a report ALV by email. First, the user wanted it attached as PDF file, but now he wants it in the body of the email.
Does anybody have any solution?
P.S.: I am using methods to send the email.
Thanks in advance.
Karla.
Thank you Jan,
I used the following solution to get the report in HTML code:
I use submit to export the list to memory
SUBMIT zsdr006_alv EXPORTING LIST TO MEMORY AND RETURN.
Them I get the list from memory
CALL FUNCTION 'LIST_FROM_MEMORY'
Finaly I convert the list to HTML code
CALL FUNCTION 'WWW_HTML_FROM_LISTOBJECT'
The problem is when I send the email, it is still not going on the body of the email.
I tried taking off the attach method, but the email goes blank in the body.
Actually to SOST the message goes with the HMTL report in the body, just like I need, but when send to any e-mail address, it does not go on the body of the message.
Does any body could check this out?
TRY.
-------- create persistent send request ------------------------
send_request = cl_bcs=>create_persistent( ).
-------- create and set document with attachment ---------------
create document from internal table with text
IF p_pdf EQ 'X'.
l_type = 'RAW'.
APPEND text-t01 TO text.
IF NOT s_erdat-low IS INITIAL.
CONCATENATE s_erdat-low6(2) '.' s_erdat-low4(2) '.' s_erdat-low(4) INTO ls_text-line.
IF NOT s_erdat-high IS INITIAL.
CONCATENATE ls_text-line 'a' INTO ls_text-line SEPARATED BY space.
CONCATENATE ls_text-line s_erdat-high+6(2) INTO ls_text-line SEPARATED BY space.
CONCATENATE ls_text-line '.' s_erdat-high+4(2) '.' s_erdat-high(4) INTO ls_text-line.
ENDIF.
CONCATENATE 'Período:' ls_text-line INTO ls_text-line SEPARATED BY space.
APPEND ls_text TO text.
ENDIF.
ELSEIF p_htm EQ 'X'.
l_type = 'HTM'.
LOOP AT gt_ascdata INTO ls_ascdata.
ls_text = ls_ascdata-line.
APPEND ls_text TO text.
ENDLOOP.
ENDIF.
subject = text-t01.
document = cl_document_bcs=>create_document(
i_type = l_type
i_text = text
i_length = '12'
i_subject = subject ).
add attachment to document
BCS expects document content here e.g. from document upload
binary_content = ...
IF p_pdf EQ 'X'.
CALL METHOD document->add_attachment
EXPORTING
i_attachment_type = 'PDF'
i_attachment_subject = g_filename
i_att_content_hex = binary_content.
ELSEIF p_htm EQ 'X'.
CALL METHOD document->add_attachment
EXPORTING
i_attachment_type = 'HTM'
i_attachment_subject = g_filename
i_att_content_text = gt_ascdata.
ENDIF.
add document to send request
CALL METHOD send_request->set_document( document ).
--------- set sender -------------------------------------------
note: this is necessary only if you want to set the sender
different from actual user (SY-UNAME). Otherwise sender is
set automatically with actual user.
sender = cl_sapuser_bcs=>create( sy-uname ).
lv_email = g_email.
sender = cl_cam_address_bcs=>create_internet_address( lv_email ).
CALL METHOD send_request->set_sender
EXPORTING
i_sender = sender.
--------- add recipient (e-mail address) -----------------------
create recipient - please replace e-mail address !!!
LOOP AT s_email.
lv_email = s_email-low.
recipient = cl_cam_address_bcs=>create_internet_address( lv_email ).
add recipient with its respective attributes to send request
CALL METHOD send_request->add_recipient
EXPORTING
i_recipient = recipient
i_express = 'X'.
ENDLOOP.
---------- send document ---------------------------------------
CALL METHOD send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = sent_to_all ).
Similar Messages
-
How to send ALV report by Email
Hi.
we have developed a block ALV report which has 3 reports i.e Detail report , summary report and Error report. Currently user run the report in background.However there is need to send this report by Email . I can use FM:SO_OBJECT_SEND . I want how to pass this report to FM and how to handle if there are multiple email ids. I think we can create a group of the user with email id in business workplace and pass the group to FM.
I need help in how to assign the report and user group to this FMHi,
You may use the code given by Amit in this link -
MAil Attachment.
It is perfect to handle any type of email requirement.
Regards,
Amit
Reward all helpful replies. -
How to send ALV report Output through mail in background !
Hi ,
I had an ALV Report. I want to send this report output to patricular email id every day ! Presenty i do this manually. I run the report and send the output to the particular email address. Now i want to schecule the report daily in background and the out put of the report should be mailed to particular email ids in background itself. How can i do this ?
Is there and method or setting through which we can do this ?
RegardsHi Nau,
For this requirement you will have to write another program.
This program will convert the spool requests into PDF document and sends an email to the recipients that you specify.
These are the threads which are already posted in The SDN.
*http://wiki.sdn.sap.com/wiki/display/Snippets/Converts+spool+request+into+PDF+document+and+emails*
*<a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="353650"></a>*
*<a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="902985"></a>*
You need to use the Function module :
-- Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
I will provide you with the code to get this functionality.
*& Form SEND_EMAIL
form SEND_EMAIL .
DATA: t_mailpack TYPE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_mailhead TYPE solisti1 OCCURS 0 WITH HEADER LINE,
t_mailbin TYPE solisti1 OCCURS 0 WITH HEADER LINE,
t_mailtxt TYPE solisti1 OCCURS 0 WITH HEADER LINE,
t_mailrec TYPE somlreci1 OCCURS 0 WITH HEADER LINE.
DATA: wa_maildata TYPE sodocchgi1,
l_filename(50) TYPE c,
l_fldname(30) TYPE c,
l_fldval(100) TYPE c,
l_lines TYPE i,
l_text TYPE text128 .
DATA: w_email_subrc TYPE i.
DATA: w_ship like vbfa-vbeln.
CLEAR: wa_maildata,
t_mailtxt,
t_mailbin,
t_mailpack,
t_mailhead,
t_mailrec.
REFRESH: t_mailtxt,
t_mailbin,
t_mailpack,
t_mailhead,
t_mailrec.
*-- Fill output file
*- Fill header
CLEAR: t_mailbin.
* t_mailbin[] = pdf_tab[].
t_mailbin[] = it_att[]. "Uthaman
*This line is added to get the shipment no in Subject Line
SELECT SINGLE * FROM vbfa WHERE vbelv EQ nast-objky
AND vbtyp_v EQ c_vbtyp_v_j
AND vbtyp_n EQ c_vbtyp_n_8.
w_ship = vbfa-vbeln.
shift w_ship left deleting leading '0'.
*-- File name
if nast-kschl EQ 'ZFPL'.
CLEAR l_filename.
CONCATENATE 'Packing List -'
sy-datum+4(2) sy-datum+6(2) sy-datum(4) '.PDF' INTO l_filename.
*-- Creation of the document to be sent File Name
wa_maildata-obj_name = 'Packing List'.
*-- Mail Subject
CONCATENATE l_filename '-' 'Shipment No -' w_ship INTO wa_maildata-obj_descr SEPARATED BY space.
*-- Mail Contents
t_mailtxt-line = 'Packing List'.
APPEND t_mailtxt.
ENDIF.
if nast-kschl EQ 'ZFBA'.
CLEAR l_filename.
CONCATENATE 'Booking Advice -'
sy-datum+4(2) sy-datum+6(2) sy-datum(4) '.PDF'
INTO l_filename.
*-- Creation of the document to be sent File Name
wa_maildata-obj_name = 'Booking Advice'.
*-- Mail Subject
CONCATENATE l_filename '-' 'Shipment No -' w_ship INTO wa_maildata-obj_descr SEPARATED BY space.
*-- Mail Contents
t_mailtxt-line = 'Packing List'.
APPEND t_mailtxt.
ENDIF.
*-- Prepare Packing List
*-- Write Packing List (Main Subject)
CLEAR: l_lines, t_mailpack.
DESCRIBE TABLE t_mailtxt LINES l_lines.
* READ TABLE t_mailtxt INDEX l_lines.
t_mailpack-doc_size = ( l_lines - 1 ) * 255 + STRLEN( t_mailtxt ).
* CLEAR t_mailpack-transf_bin.
t_mailpack-transf_bin = ' '.
t_mailpack-head_start = 1.
t_mailpack-head_num = 0.
t_mailpack-body_start = 1.
t_mailpack-body_num = l_lines.
t_mailpack-doc_type = 'RAW'.
APPEND t_mailpack.
t_mailhead = l_filename.
APPEND t_mailhead.
*-- Write Packing List (Attachment)
CLEAR: l_lines, t_mailpack.
DESCRIBE TABLE pdf_tab[] LINES l_lines.
* READ TABLE pdf_tab INDEX l_lines.
t_mailpack-doc_size = ( l_lines - 1 ) * 255 + STRLEN( t_mailbin ).
t_mailpack-transf_bin = 'X'.
t_mailpack-head_start = 1.
t_mailpack-head_num = 1.
t_mailpack-body_start = 1.
t_mailpack-body_num = l_lines.
t_mailpack-doc_type = 'PDF'.
t_mailpack-obj_name = l_filename.
t_mailpack-obj_descr = l_filename.
t_mailpack-obj_langu = 'E'.
APPEND t_mailpack.
*-- Set recipients
tables : ztotcemail.
SELECT SINGLE * FROM vbfa WHERE vbelv EQ nast-objky
AND vbtyp_v EQ c_vbtyp_v_j
AND vbtyp_n EQ c_vbtyp_n_8.
CLEAR vttk.
SELECT SINGLE * FROM vttk WHERE tknum EQ vbfa-vbeln.
SELECT SINGLE * FROM ztotcemail WHERE tplst = vttk-tplst
AND lifnr = vttk-tdlnr.
IF SY-SUBRC EQ 0.
t_mailrec-receiver = ztotcemail-smtp_addr. "'Here you will give the email address'.
t_mailrec-rec_type = 'U'.
APPEND t_mailrec.
ENDIF.
**-- Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wa_maildata
put_in_outbox = 'X'
* commit_work = 'X' " N-16
TABLES
packing_list = t_mailpack
object_header = t_mailhead
contents_bin = t_mailbin[]
contents_txt = t_mailtxt[]
receivers = t_mailrec
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
OTHERS = 99.
w_email_subrc = sy-subrc.
IF sy-subrc EQ 0.
MESSAGE s000(zotc) WITH 'Email output sent successfully'.
ELSE.
MESSAGE s000(zotc) WITH 'Can not send email output'.
ENDIF.
endform. " SEND_EMAIL
Hope the above information will be helpful.
Regards,
Kittu -
How to send ALV Report in excel format from SAP
Hi Gurus,
We are using SAP 4.7 and using different SAP reports.Now I want to send SAP ALV report in excel format directly from SAP in background.Now we send these reports in background weekly by using autimetic scheduling but this is PDF format.Now I want to change this pdf format to excel format.In SCOT T.Code I am able to find any excel format.Please help me out.
I am waiting for your reply.
Advance Thanks
NirmalHi Nirmal,
I have done the same in my previous organisation.For this particular solution you need to ask your basis guys to upgrade the support package so that BCS classes could be available in the system.
API interafces five some problem with attachemnts and SAP has recommended to use BCS classes.
Currently BCS classes won't be availbale in 4.7.
Once the BCS classes are available
use below code
CONSTANTS:
lc_tab TYPE c VALUE cl_bcs_convert=>gc_tab,
lc_crlf TYPE c VALUE cl_bcs_convert=>gc_crlf,
lc_codepage TYPE abap_encod VALUE '4103',
data :
lv_string TYPE string,
binary_content TYPE solix_tab,
size TYPE so_obj_len,
*" Set Heading of Excel File
CONCATENATE 'Employee DATA'
lc_crlf lc_crlf
INTO lv_string.
*" Set Header for Excel Fields
CONCATENATE lv_string
lc_header1 lc_tab
lc_header2 lc_tab
lc_header3 lc_tab
lc_header4 lc_tab
lc_header5 lc_tab
lc_header6 lc_tab
lc_header7 lc_tab
lc_header8 lc_tab
lc_header9 lc_tab
lc_header10 lc_crlf
INTO lv_string.
"lc_header1 to 10 could be your field headers
"Move Internal table data
LOOP AT gt_final1 INTO gwa_final1.
CONCATENATE lv_string
gwa_final1-field1 lc_tab
gwa_final1-field2 lc_tab
gwa_final1-field3 lc_crlf
INTO lv_string.
ENDLOOP.
*" convert the text string into UTF-16LE binary data including
*" byte-order-mark. Mircosoft Excel prefers these settings
*" all this is done by new class cl_bcs_convert (see note 1151257)
TRY.
cl_bcs_convert=>string_to_solix(
EXPORTING
iv_string = lv_string
iv_codepage = lc_codepage "suitable for MS Excel, leave empty
iv_add_bom = abap_true "for other doc types
IMPORTING
et_solix = binary_content
ev_size = size ).
CATCH cx_bcs.
MESSAGE e445(so).
ENDTRY.
TRY.
*" create persistent send request
send_request = cl_bcs=>create_persistent( ).
document = cl_document_bcs=>create_document(
i_type = lc_doc
i_text = main_text
i_subject = lc_sub ).
document->add_attachment(
i_attachment_type = lc_attach "#EC NOTEXT
i_attachment_subject = lc_sub "#EC NOTEXT
i_attachment_size = size
i_att_content_hex = binary_content ).
send_request->set_document( document ).
recipient = cl_cam_address_bcs=>create_internet_address( email ).
CALL METHOD send_request->add_recipient
EXPORTING
i_recipient = recipient.
IF recipient IS NOT INITIAL.
sent_to_all = send_request->send( i_with_error_screen = abap_true ).
COMMIT WORK.
* MESSAGE text-014 TYPE gc_succ .
ENDIF.
CATCH cx_bcs INTO bcs_exception.
MESSAGE i865(so) WITH bcs_exception->error_type.
ENDTRY.
For BCS decalartion u can go to se 38 and see program BCS_EXAMPLE_1 to BCS_EXAMPLE_7.
Rewrads if helpful.
Cheers
Ramesh Bhatt -
How to send ALV report by mail
Hi everybody,
I would like to know how i can donwload the ALV report to an internal table so i can send it by mail?
the fact of sending by mail it's already solved.. i tried sending the internal table of the ALV and it was OK, but what i need is to send all the display of the report..i mean..titles..columns,..totals... as i see on the screen.
for a normal report i used the %_list to send the report to an internal table but for an ALV it doesn't work.
Regards,
VanessaHi Vanessa,
If you have used Method (Container /Classes) for your ALV.
You can find "SEND" when you drop down the "Download(UCOMM = %PC)" button at Container. Select "SEND" Option this will bring you Create Document and Send screen.
Please enter reciepient and send the report.
Hope this may help you.
Lanka
Message was edited by: Lanka Murthy -
How to send ALV Grid report to Email?
hai all,
How to send ALV Grid report to Email.
please its very urgent.....Hi,
when u run the Alv, u will button 'Mail Recepiant' in tool bar.When u click it and enter to new screen, go to the Recipient Tab(down) enter ur maild id and click 'Send' button on tool bar.
or.
if u want to send the Alv content to mail id thru prg, go thru the following code.
TABLES
TABLES: BSID. " Accounting: Secondary Index for Customers.
TYPE-POOLS
TYPE-POOLS: SLIS.
INTERNAL TABLES
Internal table to hold Customer data.
DATA: BEGIN OF TB_BSID OCCURS 0,
BUKRS LIKE BSID-BUKRS, " Company code
KUNNR LIKE BSID-KUNNR, " Customer number
AUGDT LIKE BSID-AUGDT, " Clearing Date
BLDAT LIKE BSID-BLDAT, " Doc date in document
SHKZG LIKE BSID-SHKZG, " Debit/credit indicator
DMBTR LIKE BSID-DMBTR, " Amount in local currency
ZFBDT LIKE BSID-ZFBDT, " Baseline date for due date calc
ZBD1T LIKE BSID-ZBD1T, " Cash discount days 1
ZBD2T LIKE BSID-ZBD2T, " Cash discount days 2
ZBD3T LIKE BSID-ZBD3T, " Net Payment Terms Period
REBZG LIKE BSID-REBZG, " No Of the Inv the Tran Belongs to
REBZT LIKE BSID-REBZT, " Follow-On Document Type
END OF TB_BSID.
Internal table to hold Open Items.
DATA: TB_BSID_OPEN LIKE TABLE OF TB_BSID WITH HEADER LINE.
Internal table to hold Cleared Items.
DATA: TB_BSAD_CLEAR LIKE TABLE OF TB_BSID WITH HEADER LINE.
Internal table to hold General Data in Customer Master
DATA: BEGIN OF TB_KNA1 OCCURS 0,
KUNNR LIKE KNA1-KUNNR, " Customer Number
NAME1 LIKE KNA1-NAME1, " Name Line 1
TELF1 LIKE KNA1-TELF1, " Telephone Number
ADRNR LIKE KNA1-ADRNR, " Address
END OF TB_KNA1.
Internal table to hold Customer Master (Company Code)
DATA: BEGIN OF TB_KNB1 OCCURS 0,
KUNNR LIKE KNB1-KUNNR, " Customer Number
BUKRS LIKE KNB1-BUKRS, " Company code
ERDAT LIKE KNB1-ERDAT, " Rec Created Date
ZAMIB LIKE KNB1-ZAMIB, " DMS Managed Indicator
END OF TB_KNB1.
Internal table to hold Final Output Data
DATA: BEGIN OF TB_FINAL OCCURS 0,
KUNNR LIKE KNA1-KUNNR, " Customer Number
NAME1 LIKE KNA1-NAME1, " Name Line 1
ADDRESS1(25) TYPE C, " Address line 1
ADDRESS2(25) TYPE C, " Address line 2
ADDRESS3(25) TYPE C, " Address line 3
ADDRESS4(25) TYPE C, " Address line 4
PHONE LIKE KNA1-TELF1, " Telephone Number
DAYS_SLOW(3) TYPE C, " Days Slow
LAST_DATE(8) TYPE C, " Date of Last Invoice
AVG(4) TYPE C, " Average Days to Pay
CURRENT(10) TYPE N, " Current
AVG_1_30(10) TYPE N, " 1-30 past due
AVG_31_60(10) TYPE N, " 31-60 past due
AVG_61_90(10) TYPE N, " 61-90 past due
AVG_90G(10) TYPE N, " 90+ past due
END OF TB_FINAL.
ALV Internal tables
DATA : TB_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV, " Field Catalog
TB_EVENTS TYPE SLIS_T_EVENT, " ALV Events
TB_COMMENTS TYPE SLIS_T_LISTHEADER. " Comment
Internal tables for the sending mail data
DATA: TB_OBJPACK TYPE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE,
TB_OBJHEAD TYPE SOLISTI1 OCCURS 1 WITH HEADER LINE,
TB_OBJTXT TYPE SOLISTI1 OCCURS 10 WITH HEADER LINE,
TB_RECLIST TYPE SOMLRECI1 OCCURS 5 WITH HEADER LINE,
TB_OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
TB_DOC_CHNG TYPE SODOCCHGI1.
Internal table to get mail Receivers Address
DATA: TB_ZRECEIVE LIKE YSMTP_ADDRESS OCCURS 0 WITH HEADER LINE.
STRUCTURES
DATA: X_SADR TYPE SADR, " For Address
X_FIELDCAT TYPE SLIS_FIELDCAT_ALV, " For Field Catalog
X_LAYOUT TYPE SLIS_LAYOUT_ALV, " For Layout
X_EVENTS TYPE SLIS_ALV_EVENT, " For Events
X_COMMENTS TYPE SLIS_LISTHEADER, " For Comments
X_ADDR1_SEL LIKE ADDR1_SEL, " For Address
WA_FAEDE TYPE FAEDE. " For FAEDE struct
VARIABLES
DATA: G_REPID LIKE SY-REPID, " Prog ID
G_DAYS_SLOW(3) TYPE N, " Days Slow
G_OPEN TYPE I, " Counter
G_AVG(4) TYPE C, " Avg Days
G_COUNT TYPE I, " Counter
G_TITLE TYPE SOLISTI1-LINE, " Description
G_TAB_LINES TYPE SY-TABIX, " Internal data count
G_REC_COUNT TYPE I, " Total records
G_CURR_BAL TYPE N, " Account balance
G_FILE_NAME LIKE EDI_PATH-PTHNAM. " Output File Name
CONSTANTS
CONSTANTS: C_D TYPE C VALUE 'D', " Account type
C_X TYPE C VALUE 'X', " Check Value
C_0(4) TYPE N VALUE '0.00', " Constant for char
C_1(2) TYPE C VALUE '01', " Posting key const
C_H TYPE C VALUE 'H', " For Commenet-Type
C_TXT(3) TYPE N VALUE 'TXT', " File type
C_RAW(3) TYPE C VALUE 'RAW', " File type
C_DELIMITER TYPE X VALUE '09', " ASCII CODE LINE
C_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE',
C_INTERFACE TYPE YWFSALOFFICNOTIF-INTERFACE_ID VALUE 'AP',
C_FILENAME(20) TYPE N VALUE 'TEXT.TXT'," File name
C_TITLE(30) TYPE N VALUE 'Z21614_DB_CREDIT_AGENCY',
C_Z001 TYPE RF035-RASID VALUE 'Z001'." Net 30/60/90/120/150
SELECTION SCREEN.
Selection Screen for Selection Criteria.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-T01.
SELECT-OPTIONS: S_BUKRS FOR BSID-BUKRS OBLIGATORY, " Company Code
S_BLDAT FOR BSID-BLDAT," OBLIGATORY, " Doc Date
S_KUNNR FOR BSID-KUNNR, " Cust No
S_ZUONR FOR BSID-ZUONR. " Assignment
PARAMETERS: P_GRACE(2) TYPE N OBLIGATORY, " Grace Days
P_ZAMIB LIKE KNB1-ZAMIB AS CHECKBOX. " DMS Indicator
SELECTION-SCREEN END OF BLOCK B1.
Selection Screen for Output Options.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-T02.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 01.
PARAMETERS: P_REPORT RADIOBUTTON GROUP R1. " Report Only
SELECTION-SCREEN COMMENT 5(25) TEXT-016.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 01.
PARAMETERS: P_DOWN RADIOBUTTON GROUP R1. " Dwnld to Unix
SELECTION-SCREEN COMMENT 5(25) TEXT-017.
SELECTION-SCREEN POSITION 30.
PARAMETERS: P_FILE LIKE FILENAME-FILEINTERN DEFAULT
'Z21614_DB_CREDIT_AGENCY'. " File Name
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
Selection Screen for E-mail.
SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME TITLE TEXT-T03.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 01.
PARAMETERS: P_EMAIL AS CHECKBOX. " E-mail
SELECTION-SCREEN COMMENT 5(25) TEXT-018.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B3.
INITIALIZATION
INITIALIZATION.
G_REPID = SY-REPID.
AT SELECTION SCREEN. *
AT SELECTION-SCREEN.
Validation of selection screen entries
perform validate_data.
START-OF-SELECTION
START-OF-SELECTION.
Select Data from Customer Master (Company Code)
PERFORM SELECT_KNB1.
Select Custmer Open Items.
PERFORM SELECT_CUSTOMER_OPEN_ITEMS.
Select Custmer Cleared Items.
PERFORM SELECT_CUSTOMER_CLEARED_ITEMS.
Select General Data in Customer Master
PERFORM SELECT_KNA1.
Populate Final Output Data.
PERFORM POPULATE_TB_FINAL.
End of selection *
END-OF-SELECTION.
If both display report and send email is checked
IF P_REPORT = C_X AND P_EMAIL = C_X.
MESSAGE E999 WITH
'Select One Among Report Only & Send E-mail'(023).
When Radiobutton for Email or if the program is run background
ELSEIF ( P_EMAIL = C_X OR SY-BATCH = C_X ).
To send the mail
PERFORM SEND_EMAIL.
ELSEIF P_REPORT = C_X .
To display the Final Output data using ALV's
PERFORM DISPLAY_ALV_REPORT.
ENDIF.
Transfering data to file when downloading to Unix
IF P_DOWN = C_X.
IF G_REC_COUNT IS INITIAL.
MESSAGE I999 WITH
'No Records Found For Selection Criteria'(024).
EXIT.
ELSE.
IF NOT G_FILE_NAME IS INITIAL.
Trasefering data to file
PERFORM TRANSFER_DATA_FILE.
Interface Audit report
PERFORM WRITE_REPORT.
ENDIF.
ENDIF.
ENDIF.
F O R M S
*& Form VALIDATE_DATA
Validating selection-screen entries
FORM VALIDATE_DATA.
Local variables
DATA : L_BUKRS LIKE BSEG-BUKRS, " For Company Code
L_KUNNR LIKE BSEG-KUNNR. " For Customer Number
Validate the Company code.
SELECT SINGLE BUKRS
INTO L_BUKRS
FROM T001
WHERE BUKRS IN S_BUKRS.
IF SY-SUBRC <> 0.
MESSAGE E999 WITH 'Enter valid Company Code'(025).
ENDIF.
Validate the Customer number
IF NOT S_KUNNR[] IS INITIAL.
SELECT SINGLE KUNNR
INTO L_KUNNR
FROM KNA1
WHERE KUNNR IN S_KUNNR.
IF SY-SUBRC <> 0.
MESSAGE E999 WITH 'Enter valid Customer Number'(026).
ENDIF.
ENDIF.
ENDFORM. " VALIDATE_DATA
*& Form SELECT_KNB1
Select Data from Customer Master (Company Code)
FORM SELECT_KNB1 .
CLEAR: TB_KNB1,
TB_KNB1[].
SELECT KUNNR
BUKRS
ERDAT
ZAMIB
FROM KNB1
INTO TABLE TB_KNB1
WHERE BUKRS IN S_BUKRS
AND KUNNR IN S_KUNNR.
IF SY-SUBRC = 0.
Sort TB_KNB1 by Customer no & Rec Created Date
SORT TB_KNB1 BY KUNNR ERDAT DESCENDING.
ENDIF.
ENDFORM. " SELECT_KNB1
*& Form SELECT_CUSTOMER_OPEN_ITEMS
Select Custmer Open Items.
FORM SELECT_CUSTOMER_OPEN_ITEMS .
CLEAR: TB_BSID,
TB_BSID[].
SELECT A~BUKRS
B~KUNNR
B~AUGDT
B~BLDAT
B~SHKZG
B~DMBTR
B~ZFBDT
B~ZBD1T
B~ZBD2T
B~ZBD3T
B~REBZG
B~REBZT
INTO TABLE TB_BSID
FROM BKPF AS A JOIN BSID AS B
ON ABUKRS = BBUKRS
AND ABELNR = BBELNR
AND AGJAHR = BGJAHR
WHERE A~BUKRS IN S_BUKRS
AND A~BLDAT IN S_BLDAT
AND B~KUNNR IN S_KUNNR
AND B~ZUONR IN S_ZUONR
AND B~BSCHL = C_1.
IF SY-SUBRC = 0.
DMS Managed Indicator = X.
IF P_ZAMIB = C_X.
LOOP AT TB_KNB1 WHERE ZAMIB = SPACE.
DELETE TB_BSID WHERE BUKRS = TB_KNB1-BUKRS
AND KUNNR = TB_KNB1-KUNNR.
ENDLOOP.
ENDIF.
Transfering Open Items from TB_BSID to TB_BSID_OPEN
TB_BSID_OPEN[] = TB_BSID[].
ENDIF.
ENDFORM. " SELECT_CUSTOMER_OPEN_ITEMS
*& Form SELECT_CUSTOMER_CLEARED_ITEMS
Select Custmer Cleared Items.
FORM SELECT_CUSTOMER_CLEARED_ITEMS .
CLEAR: TB_BSAD_CLEAR,
TB_BSAD_CLEAR[].
SELECT A~BUKRS
B~KUNNR
B~AUGDT
B~BLDAT
B~SHKZG
B~DMBTR
B~ZFBDT
B~ZBD1T
B~ZBD2T
B~ZBD3T
B~REBZG
B~REBZT
INTO TABLE TB_BSAD_CLEAR
FROM BKPF AS A JOIN BSAD AS B
ON ABUKRS = BBUKRS
AND ABELNR = BBELNR
AND AGJAHR = BGJAHR
WHERE A~BUKRS IN S_BUKRS
AND A~BLDAT IN S_BLDAT
AND B~KUNNR IN S_KUNNR
AND B~ZUONR IN S_ZUONR
AND B~BSCHL = C_1.
IF SY-SUBRC = 0.
DMS Managed Indicator = X.
IF P_ZAMIB = C_X.
LOOP AT TB_KNB1 WHERE ZAMIB = SPACE.
DELETE TB_BSID WHERE BUKRS = TB_KNB1-BUKRS
AND KUNNR = TB_KNB1-KUNNR.
ENDLOOP.
ENDIF.
Sort TB_BSID_CLEAR by Customer number
SORT TB_BSAD_CLEAR BY KUNNR.
ENDIF.
Append lines of TB_BSID_CLEAR to table TB_BSID
APPEND LINES OF TB_BSAD_CLEAR TO TB_BSID.
Sort TB_BSID by Cust num AND Doc date in document
SORT TB_BSID BY KUNNR BLDAT.
ENDFORM. " SELECT_CUSTOMER_CLEARED_ITEMS
*& Form SELECT_KNA1
Select General Data in Customer Master
FORM SELECT_KNA1.
CLEAR: TB_KNA1,
TB_KNA1[].
SELECT KUNNR
NAME1
TELF1
ADRNR
INTO TABLE TB_KNA1
FROM KNA1
WHERE KUNNR IN S_KUNNR.
IF SY-SUBRC <> 0.
ENDIF.
ENDFORM. " SELECT_KNA1
*& Form POPULATE_TB_FINAL
Populate Final Output Data.
FORM POPULATE_TB_FINAL.
Local variable
DATA: L_DAYS_SLOW(3) TYPE N. " Days Slow
CLEAR: TB_FINAL,
TB_FINAL[].
LOOP AT TB_KNA1.
Move-corresponding TB_KNA1 to TB_FINAL.
TB_FINAL-KUNNR = TB_KNA1-KUNNR. " Customer Number
TB_FINAL-NAME1 = TB_KNA1-NAME1. " Name Line 1
TB_FINAL-PHONE = TB_KNA1-TELF1. " Telephone Number
To get Customer Address.
PERFORM GET_CUSTOMER_ADDRESS.
To get Date of Last Invoice.
READ TABLE TB_BSID WITH KEY KUNNR = TB_KNA1-KUNNR.
IF SY-SUBRC = 0.
TB_FINAL-LAST_DATE = TB_BSID-BLDAT.
ENDIF.
To get past due and current details.
PERFORM GET_PAST_DUE_CURRENT.
To get Days Slow.
CLEAR WA_FAEDE .
LOOP AT TB_BSID_OPEN WHERE KUNNR = TB_KNA1-KUNNR.
WA_FAEDE-SHKZG = TB_BSID-SHKZG.
WA_FAEDE-ZFBDT = TB_BSID-ZFBDT.
WA_FAEDE-ZBD1T = TB_BSID-ZBD1T.
WA_FAEDE-ZBD2T = TB_BSID-ZBD2T.
WA_FAEDE-ZBD3T = TB_BSID-ZBD3T.
WA_FAEDE-REBZG = TB_BSID-REBZG.
WA_FAEDE-REBZT = TB_BSID-REBZT.
WA_FAEDE-KOART = C_D.
To Determine Due Date.
CALL FUNCTION 'DETERMINE_DUE_DATE'
EXPORTING
I_FAEDE = WA_FAEDE
IMPORTING
E_FAEDE = WA_FAEDE
EXCEPTIONS
ACCOUNT_TYPE_NOT_SUPPORTED = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
CLEAR WA_FAEDE.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR: L_DAYS_SLOW.
L_DAYS_SLOW = SY-DATUM - WA_FAEDE-NETDT - P_GRACE.
G_DAYS_SLOW = G_DAYS_SLOW + ABS( L_DAYS_SLOW ).
G_OPEN = G_OPEN + 1.
ENDLOOP.
IF G_OPEN IS INITIAL.
TB_FINAL-DAYS_SLOW = G_DAYS_SLOW / G_OPEN. " Days Slow
ENDIF.
To get Average days to Pay.
PERFORM GET_AVG_DAYS_PAY.
Calculating total records .
G_REC_COUNT = G_REC_COUNT + 1.
APPEND TB_FINAL.
CLEAR TB_FINAL.
ENDLOOP.
Current account balance.
G_CURR_BAL = TB_FINAL-CURRENT + TB_FINAL-AVG_1_30 +
TB_FINAL-AVG_31_60 +
TB_FINAL-AVG_61_90 +
TB_FINAL-AVG_90G .
ENDFORM. " POPULATE_TB_FINAL
*& Form GET_PAST_DUE_CURRENT
To get past due and current details.
FORM GET_PAST_DUE_CURRENT.
Local Varaibles.
DATA: L_RF035_SFAE1 TYPE RF035-SFAE1,
L_RF035_SFAE2 TYPE RF035-SFAE2,
L_RF035_SFAE3 TYPE RF035-SFAE3,
L_RF035_SFAE4 TYPE RF035-SFAE4,
L_RF035_SFAE5 TYPE RF035-SFAE5,
L_RF035_SFAE6 TYPE RF035-SFAE6,
L_RF035_SFAEL TYPE RF035-SFAEL,
L_RF035_SNFA1 TYPE RF035-SNFA1,
L_RF035_SNFA2 TYPE RF035-SNFA2,
L_RF035_SNFA3 TYPE RF035-SNFA3,
L_RF035_SNFA4 TYPE RF035-SNFA4,
L_RF035_SNFA5 TYPE RF035-SNFA5,
L_RF035_SNFA6 TYPE RF035-SNFA6,
L_RF035_SNFAE TYPE RF035-SNFAE.
LOOP AT TB_KNB1 WHERE KUNNR = TB_KNA1-KUNNR.
CALL FUNCTION 'CUSTOMER_DUE_DATE_ANALYSIS'
EXPORTING
BUKRS = TB_KNB1-BUKRS
KKBER = ' '
KUNNR = TB_KNB1-KUNNR
RASID = C_Z001
IMPORTING
SFAE1 = L_RF035_SFAE1
SFAE2 = L_RF035_SFAE2
SFAE3 = L_RF035_SFAE3
SFAE4 = L_RF035_SFAE4
SFAE5 = L_RF035_SFAE5
SFAE6 = L_RF035_SFAE6
SFAEL = L_RF035_SFAEL
SNFA1 = L_RF035_SNFA1
SNFA2 = L_RF035_SNFA2
SNFA3 = L_RF035_SNFA3
SNFA4 = L_RF035_SNFA4
SNFA5 = L_RF035_SNFA5
SNFA6 = L_RF035_SNFA6
SNFAE = L_RF035_SNFAE
EXCEPTIONS
INVALID_RASTER = 1
NO_OPEN_ITEMS = 2
OTHERS = 3
IF SY-SUBRC = 0.
TB_FINAL-AVG_1_30 = TB_FINAL-AVG_1_30 + L_RF035_SFAE1.
TB_FINAL-AVG_31_60 = TB_FINAL-AVG_31_60 + L_RF035_SFAE2.
TB_FINAL-AVG_61_90 = TB_FINAL-AVG_61_90 + L_RF035_SFAE3.
TB_FINAL-AVG_90G = TB_FINAL-AVG_90G + L_RF035_SFAE4
+ L_RF035_SFAE5
+ L_RF035_SFAE6.
TB_FINAL-CURRENT = TB_FINAL-CURRENT + L_RF035_SNFAE.
ELSE.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDLOOP.
ENDFORM. " GET_PAST_DUE_CURRENT
*& Form GET_CUSTOMER_ADDRESS
To get Customer Address.
FORM GET_CUSTOMER_ADDRESS.
X_ADDR1_SEL-ADDRNUMBER = TB_KNA1-ADRNR.
CALL FUNCTION 'ADDR_GET'
EXPORTING
ADDRESS_SELECTION = X_ADDR1_SEL
IMPORTING
SADR = X_SADR
EXCEPTIONS
PARAMETER_ERROR = 1
ADDRESS_NOT_EXIST = 2
VERSION_NOT_EXIST = 3
INTERNAL_ERROR = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ADDRESS LINE 1.
TB_FINAL-ADDRESS1 = X_SADR-STRAS.
ADDRESS LINE 2.
CONCATENATE X_SADR-PFACH 'CODE' X_SADR-PSTL2 INTO TB_FINAL-ADDRESS2
SEPARATED BY SPACE.
ADDRESS LINE 3.
CONCATENATE X_SADR-ORT01 X_SADR-ORT02 ',' X_SADR-REGIO X_SADR-PSTLZ
INTO TB_FINAL-ADDRESS3 SEPARATED BY SPACE.
ADDRESS LINE 4.
TB_FINAL-ADDRESS4 = X_SADR-LAND1.
ENDFORM. " GET_CUSTOMER_ADDRESS
*& Form GET_AVG_DAYS_PAY
To get Average days to Pay.
FORM GET_AVG_DAYS_PAY.
*Local variable
DATA: L_DAYS TYPE N . " Number of Days
LOOP AT TB_BSAD_CLEAR WHERE KUNNR = TB_KNA1-KUNNR.
L_DAYS = TB_BSAD_CLEAR-AUGDT - TB_BSAD_CLEAR-BLDAT.
G_AVG = G_AVG + L_DAYS.
G_COUNT = G_COUNT + 1.
ENDLOOP.
IF NOT G_COUNT IS INITIAL.
TB_FINAL-AVG = G_AVG / G_COUNT. " Average days to Pay.
ENDIF.
ENDFORM. " GET_AVG_DAYS_PAY
*& Form DISPLAY_ALV_REPORT
text
FORM DISPLAY_ALV_REPORT.
For Populating Field Catalog.
PERFORM RPT_BUILD_FIELDCATLOG.
For Modifying Field Catalog.
PERFORM RPT_MODIFY_FIELDCATLOG.
For TOP_OF_PAGE Event.
PERFORM RPT_GET_EVENTS.
For Displaying Output in Grid Format.
PERFORM RPT_GRID_DISPLAY.
ENDFORM. " DISPLAY_ALV_REPORT
*& Form RPT_BUILD_FIELDCATLOG
text
FORM RPT_BUILD_FIELDCATLOG.
To build the Field Catlog.
DATA : L_TABNAME TYPE SLIS_TABNAME. " Table Name
L_TABNAME = 'TB_FINAL'.
REFRESH : TB_FIELDCAT.
CLEAR : TB_FIELDCAT.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = G_REPID
I_INTERNAL_TABNAME = L_TABNAME
I_INCLNAME = G_REPID
CHANGING
CT_FIELDCAT = TB_FIELDCAT
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " RPT_BUILD_FIELDCATLOG
*& Form RPT_MODIFY_FIELDCATLOG
text
FORM RPT_MODIFY_FIELDCATLOG.
Getting the Header Text for the Coloumns
DATA : L_TABIX LIKE SY-TABIX, " Index
L_DDICTXT TYPE C VALUE 'L'. " Flag
Getting the Header Text for the Coloumns
LOOP AT TB_FIELDCAT INTO X_FIELDCAT.
CLEAR L_TABIX.
L_TABIX = SY-TABIX.
CASE X_FIELDCAT-FIELDNAME.
WHEN 'KUNNR'. " Customer Number
X_FIELDCAT-SELTEXT_L = 'Customer Number'(001).
X_FIELDCAT-DDICTXT = L_DDICTXT.
WHEN 'NAME1'. " Name Line 1
X_FIELDCAT-SELTEXT_L = 'Name'(002).
X_FIELDCAT-DDICTXT = L_DDICTXT.
WHEN 'ADDRESS1'. " Address line 1
X_FIELDCAT-SELTEXT_L = 'Address 1'(003).
X_FIELDCAT-DDICTXT = L_DDICTXT.
WHEN 'ADDRESS2'. " Address line 2
X_FIELDCAT-SELTEXT_L = 'Address 2'(004).
X_FIELDCAT-DDICTXT = L_DDICTXT.
WHEN 'ADDRESS3'. " Address line 3
X_FIELDCAT-SELTEXT_L = 'Address 3'(005).
X_FIELDCAT-DDICTXT = L_DDICTXT.
WHEN 'ADDRESS4'. " Address line 4
X_FIELDCAT-SELTEXT_L = 'Address 4'(006).
X_FIELDCAT-DDICTXT = L_DDICTXT.
WHEN 'PHONE'. " Telephone Number
X_FIELDCAT-SELTEXT_L = 'Telephone Number'(007).
X_FIELDCAT-DDICTXT = L_DDICTXT.
WHEN 'DAYS_SLOW'. " Days Slow
X_FIELDCAT-SELTEXT_L = 'Days Slow'(008).
X_FIELDCAT-DDICTXT = L_DDICTXT.
WHEN 'LAST_DATE'. " Date of Last Invoice
X_FIELDCAT-SELTEXT_L = 'Date of Last Invoice'(009).
X_FIELDCAT-DDICTXT = L_DDICTXT.
WHEN 'AVG'. " Average Days to Pay
X_FIELDCAT-SELTEXT_L = 'Average Days to Pay'(010).
X_FIELDCAT-DDICTXT = L_DDICTXT.
WHEN 'CURRENT'. " Current
X_FIELDCAT-SELTEXT_L = 'Aging Category 1'(011).
X_FIELDCAT-DDICTXT = L_DDICTXT.
WHEN 'AVG_1_30'. " 1-30 past due
X_FIELDCAT-SELTEXT_L = 'Aging Category 2'(012).
X_FIELDCAT-DDICTXT = L_DDICTXT.
WHEN 'AVG_31_60'. " 31-60 past due
X_FIELDCAT-SELTEXT_L = 'Aging Category 3'(013).
X_FIELDCAT-DDICTXT = L_DDICTXT.
WHEN 'AVG_61_90'. " 61-90 past due
X_FIELDCAT-SELTEXT_L = 'Aging Category 4'(014).
X_FIELDCAT-DDICTXT = L_DDICTXT.
WHEN 'AVG_90G'. " 90+ past due
X_FIELDCAT-SELTEXT_L = 'Aging Category 5'(015).
X_FIELDCAT-DDICTXT = L_DDICTXT.
ENDCASE.
MODIFY TB_FIELDCAT FROM X_FIELDCAT INDEX L_TABIX.
ENDLOOP.
ENDFORM. " RPT_MODIFY_FIELDCATLOG
*& Form RPT_GET_EVENTS
text
FORM RPT_GET_EVENTS.
DATA : L_TABIX TYPE SY-TABIX. " Index
CLEAR : TB_EVENTS,
TB_EVENTS[].
To get the events from this function module
for ALV display
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = TB_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE I999 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Modifing Top of Page event
READ TABLE TB_EVENTS WITH KEY NAME = SLIS_EV_TOP_OF_PAGE
INTO X_EVENTS.
IF SY-SUBRC = 0.
CLEAR L_TABIX.
L_TABIX = SY-TABIX.
X_EVENTS-FORM = C_TOP_OF_PAGE.
MODIFY TB_EVENTS FROM X_EVENTS INDEX L_TABIX.
CLEAR X_EVENTS.
ENDIF.
ENDFORM. " RPT_GET_EVENTS
*& Form TOP_OF_PAGE
Top Of Page for the ALV format
FORM TOP_OF_PAGE.
REFRESH TB_COMMENTS.
For heading
CLEAR X_COMMENTS.
X_COMMENTS-TYP = C_H.
X_COMMENTS-INFO = 'D&B Credit Agency Interface'(019).
APPEND X_COMMENTS TO TB_COMMENTS.
This module outputs formatted simple header information at TOP-OF-PAGE
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = TB_COMMENTS.
ENDFORM. " TOP_OF_PAGE
*& Form RPT_GRID_DISPLAY
text
FORM RPT_GRID_DISPLAY.
Layout Settings
CLEAR X_LAYOUT.
X_LAYOUT-ZEBRA = 'X'.
X_LAYOUT-COLWIDTH_OPTIMIZE = C_X.
X_LAYOUT-NO_COLHEAD = SPACE.
To Display the Output in ALV Format
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = G_REPID
IS_LAYOUT = X_LAYOUT
IT_FIELDCAT = TB_FIELDCAT
IT_EVENTS = TB_EVENTS
TABLES
T_OUTTAB = TB_FINAL
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " RPT_GRID_DISPLAY
*& Form SEND_EMAIL
text
--> p1 text
<-- p2 text
FORM SEND_EMAIL.
Prepare the mail
PERFORM SEND_MAIL USING C_INTERFACE.
Sending the mail to Receivers
PERFORM SENDING_MAIL.
ENDFORM. " SEND_EMAIL
*& Form SEND_MAIL
Sending the Mail
FORM SEND_MAIL USING P_C_INTERFACE TYPE YWFSALOFFICNOTIF-INTERFACE_ID.
Populating Report name
G_TITLE = C_TITLE.
PERFORM POPULATE_EMAIL_REF_DATA USING G_TITLE.
IF NOT G_REC_COUNT IS INITIAL.
To populate the data to table tb_objbin
PERFORM POPULATE_DATA_OBJBIN.
To get the attached file for the mail
CLEAR G_TAB_LINES.
DESCRIBE TABLE TB_OBJBIN LINES G_TAB_LINES.
TB_OBJHEAD = C_FILENAME.
APPEND TB_OBJHEAD.
CLEAR TB_OBJHEAD.
Creation of the entry for the mail
TB_OBJPACK-TRANSF_BIN = C_X.
TB_OBJPACK-HEAD_START = C_1.
TB_OBJPACK-HEAD_NUM = C_1.
TB_OBJPACK-BODY_START = C_1.
TB_OBJPACK-BODY_NUM = G_TAB_LINES.
TB_OBJPACK-DOC_TYPE = C_TXT.
TB_OBJPACK-OBJ_NAME = G_REPID.
TB_OBJPACK-OBJ_DESCR = 'Interface Audit Report'(020).
TB_OBJPACK-DOC_SIZE = G_TAB_LINES * 255.
APPEND TB_OBJPACK.
ENDIF.
ENDFORM. " SEND_MAIL
*& Form SENDING_MAIL
FORM SENDING_MAIL.
Function Module to send mail along with attached file
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = TB_DOC_CHNG
TABLES
PACKING_LIST = TB_OBJPACK
OBJECT_HEADER = TB_OBJHEAD
CONTENTS_BIN = TB_OBJBIN
CONTENTS_TXT = TB_OBJTXT
RECEIVERS = TB_RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
CASE SY-SUBRC.
WHEN 0.
MESSAGE S999 WITH 'Mail has been sucessfully sent'(029).
WHEN 1.
MESSAGE S999 WITH 'Too Many Parameters'(030).
WHEN 2.
MESSAGE S999 WITH 'Doc Could Not Be Sent'(031).
WHEN 4.
MESSAGE S999 WITH 'No Authority To Send'(032).
WHEN 99.
MESSAGE S999 WITH 'Error While Sending'(033).
ENDCASE.
ENDFORM. " SENDING_MAIL
*& Form POPULATE_EMAIL_REF_DATA
Poplulating the body of the mail
FORM POPULATE_EMAIL_REF_DATA USING TEXT TYPE SOLISTI1-LINE.
Setting up Mail Subject
TB_DOC_CHNG-OBJ_DESCR = 'Interface Audit Report'(020).
Populating body of the mail
TB_OBJTXT-LINE = 'Interface Audit Report'(020).
APPEND TB_OBJTXT.
CLEAR: TB_OBJTXT.
DESCRIBE TABLE TB_OBJTXT LINES G_TAB_LINES.
READ TABLE TB_OBJTXT INDEX G_TAB_LINES.
*To determine the document size
TB_DOC_CHNG-DOC_SIZE = ( G_TAB_LINES - 1 ) * 255 + STRLEN( TB_OBJTXT ).
Creation of the entry for the Mail Contents
CLEAR TB_OBJPACK-TRANSF_BIN.
TB_OBJPACK-HEAD_START = C_1.
TB_OBJPACK-HEAD_NUM = C_0.
TB_OBJPACK-BODY_START = C_1.
TB_OBJPACK-BODY_NUM = G_TAB_LINES.
TB_OBJPACK-DOC_TYPE = C_RAW.
APPEND TB_OBJPACK.
ENDFORM. " POPULATE_EMAIL_REF_DATA
*& Form POPULATE_DATA_OBJBIN
Populating table for file attachment -
How To Send ALV Output By Email.
Hi !
I wanted to ask how to send ALV output of report by email.
I know that i have to use the fms :
1. 'WWW_HTML_FROM_LISTOBJECT' - in order to convert the table to HTML.
2. 'SO_NEW_DOCUMENT_ATT_SEND_API1' - in order to send the HTML file.
My problem is how to convert the ALV screen output to the apropriate table parameter of the function 'WWW_HTML_FROM_LISTOBJECT' to listobject type ?
thanks
mosheHi look at the following program.
*& Report ZSM17_EMAIL1
REPORT zsm17_email.
tables : mara.
data: begin of it_mara occurs 0,
matnr like mara-matnr,
ernam like mara-ernam,
mtart like mara-mtart,
matkl like mara-matkl,
end of it_mara.
data: begin of it_final occurs 0,
v_string(255),
end of it_final.
*DATA: objpack LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 5 WITH HEADER LINE.
DATA: objpack LIKE sopcklsti1 OCCURS 0 with header line,
objhead LIKE solisti1 OCCURS 0 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
data: wa_objbin like line of objbin.
DATA: doc_chng LIKE sodocchgi1.
DATA: tab_lines LIKE sy-tabix.
select-options s_matnr for mara-matnr.
*--- Selecting data from mara
select matnr
ernam
mtart
matkl
into table it_mara
from mara
where matnr in s_matnr.
if sy-subrc ne 0.
write:/ 'no data found'.
exit.
else.
loop at it_mara.
concatenate it_mara-matnr
it_mara-ernam
it_mara-mtart
it_mara-matkl
into it_final-v_string separated by '~'.
append it_final.
clear it_final.
endloop.
endif.
Creating the document to be sent
doc_chng-obj_name = 'TEST'. "name of the document
title of document or subject
doc_chng-obj_descr = 'Test Email program'.
body of the mail
objtxt = 'A test report'.
APPEND objtxt.
objtxt = 'is enclosed as an attachment.'.
APPEND objtxt.
*clear objtxt.
DESCRIBE TABLE objtxt LINES tab_lines.
Size of SAPoffice Document (for API1)
doc_chng-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
Creating the entry for the compressed attachment
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'RAW'.
*objpack-obj_name = 'ATTACHMENT'.
*objpack-obj_descr = 'Test Email Program'.
*objpack-doc_size = tab_lines * 255.
APPEND objpack..
*--- Populating the records in the attachment
data: w_str(255) TYPE c.
loop at it_final into wa_objbin.
append wa_objbin to objbin.
append objbin.
clear wa_objbin.
endloop.
DESCRIBE TABLE objbin LINES tab_lines.
tab_lines = tab_lines + 1.
objhead = 'test_report.txt'.
append objhead.
Creating the entry for the compressed attachment
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 1.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'txt'.
objpack-obj_name = 'txt'.
objpack-obj_descr = 'Test Email Program'.
objpack-doc_size = tab_lines * 255.
APPEND objpack..
*write:/ 'object text', objtxt.
Entering names in the distribution list
reclist-receiver = '[email protected]'.
reclist-rec_type = 'U'.
APPEND reclist.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = doc_chng
put_in_outbox = 'X'
commit_work = 'X'
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
OTHERS = 99.
CASE sy-subrc.
WHEN 0.
WRITE: / 'Result of the send process:'.
LOOP AT reclist.
WRITE: reclist-receiver(48), ':'.
IF reclist-retrn_code = 0.
WRITE 'sent successfully'.
ELSE.
WRITE 'not sent'.
ENDIF.
ENDLOOP.
loop at objbin.
write: objbin-line.
endloop.
WHEN 1.
WRITE: / 'no authorization to send to the specified number of' .
"'recipients!'.
WHEN 2.
WRITE: / 'document could not be sent to any of the recipients!'.
WHEN 4.
WRITE: / 'no authorization to send !'.
WHEN OTHERS.
WRITE: / 'error occurred during sending !'.
ENDCASE. -
How to send puchase report in email ?
how to send puchase report in email ?
Search SCN, you will get lot of post for this.
Here is an example.
http://scn.sap.com/thread/321890 -
About how to send ALV through email
Hi everyone ,
I have a problem about how to send ALV through email in background . if someone knows , pls tell me .
thanks in advance
Best Regard
NickI write a test program , but it doesn't work , use any exists ALV program in the system , and use the "sendlist " program to send the email. what I want is when I restrict some conditons in the selection-screen , then it send ALV to Email .
Thanks
Nick -
Sending ALV report(As a attachment ) through EMail
Dear Friends,
Could anyone please help me to solve this problem.
I need to send ALV report <b>as an attachment</b> to External mail-id as well as SAP USER ID..The user wants to schedule this ABAP program in background, at the end the final output should be send to his ID. I facing problem to locate correct Functional Module....
I would like to thank, if anyone give some idea on this issue also if possible a sample code.
Thanks in advance
With Reg
BabuHI Kamal Babu
After sending your ABAP List to the spool request (SP01), you can use the SAP standard spool PDF conversion program.
RSTXPDFT4 - This report program converts ABAP List to PDF files.
Or Just try this sample code:
After running the background jobs, send the spool to the SAP users Office Mail Box.
REPORT ZMAILSPOOL.
INCLUDE LBTCHDEF.
Include the Business Object Repository object
INCLUDE <CNTN01>.
DATA ABAPNM LIKE SY-REPID.
DATA BEGIN OF LOCAL_JOB.
INCLUDE STRUCTURE TBTCJOB.
DATA END OF LOCAL_JOB.
DATA BEGIN OF LOCAL_STEP_TBL OCCURS 10.
INCLUDE STRUCTURE TBTCSTEP.
DATA END OF LOCAL_STEP_TBL.
Data declarations for the mail recipient
DATA RECIPIENT TYPE SWC_OBJECT.
DATA RECIPIENT_OBJ LIKE SWOTOBJID.
SWC_CONTAINER CONTAINER.
Data declarations for the background job
PARAMETERS ABAPNAME(20) DEFAULT 'ZTEST1'.
PARAMETERS EMPFNAME LIKE SY-UNAME DEFAULT SY-UNAME.
ABAPNM = ABAPNAME.
LOCAL_JOB-JOBNAME = ABAPNAME.
Generate recipient object (see report RSSOKIF1 for an example)
1. Create the recipient:
IF EMPFNAME <> SPACE.
"** 1.1 Generate an object reference to a recipient object
SWC_CREATE_OBJECT RECIPIENT 'RECIPIENT' SPACE.
"** 1.2 Write the import parameters for method
"** recipient.createaddress into the container
"** and empty the container
SWC_CLEAR_CONTAINER CONTAINER.
"** Set address element (internal user 'JSMITH')
SWC_SET_ELEMENT CONTAINER 'AddressString' EMPFNAME.
"** Set address type (internal user)
SWC_SET_ELEMENT CONTAINER 'TypeId' 'B'.
"** 1.3 Call the method recipient.createaddress
SWC_CALL_METHOD RECIPIENT 'CreateAddress' CONTAINER.
"** Issue any error message generated by a method exception
IF SY-SUBRC NE 0.
MESSAGE ID SY-MSGID TYPE 'E' NUMBER SY-MSGNO.
ENDIF.
SWC_CALL_METHOD RECIPIENT 'Save' CONTAINER.
SWC_OBJECT_TO_PERSISTENT RECIPIENT RECIPIENT_OBJ.
ENDIF.
Recipient has been generated and is ready for use in a
background job
CALL FUNCTION 'JOB_OPEN'
exporting
DELANFREP = ' '
JOBGROUP = ' '
jobname = LOCAL_JOB-JOBNAME
SDLSTRTDT = NO_DATE
SDLSTRTTM = NO_TIME
IMPORTING
JOBCOUNT = LOCAL_JOB-JOBCOUNT
EXCEPTIONS
CANT_CREATE_JOB = 1
INVALID_JOB_DATA = 2
JOBNAME_MISSING = 3
OTHERS = 4
if sy-subrc <> 0.
WRITE: / 'JOB_OPEN PROBLEM ', SY-SUBRC.
ELSE.
WRITE: / 'JOB OPEN SUCCESS',
LOCAL_JOB-JOBNAME, LOCAL_JOB-JOBCOUNT.
endif.
CALL FUNCTION 'JOB_SUBMIT'
exporting
ARCPARAMS =
authcknam = SY-UNAME
COMMANDNAME = ' '
OPERATINGSYSTEM = ' '
EXTPGM_NAME = ' '
EXTPGM_PARAM = ' '
EXTPGM_SET_TRACE_ON = ' '
EXTPGM_STDERR_IN_JOBLOG = 'X'
EXTPGM_STDOUT_IN_JOBLOG = 'X'
EXTPGM_SYSTEM = ' '
EXTPGM_RFCDEST = ' '
EXTPGM_WAIT_FOR_TERMINATION = 'X'
jobcount = LOCAL_JOB-JOBCOUNT
jobname = LOCAL_JOB-JOBNAME
LANGUAGE = SY-LANGU
PRIPARAMS = ' '
REPORT = ABAPNM
REPORT = 'ZTEST1'
VARIANT = ' '
IMPORTING
STEP_NUMBER = LOCAL_JOB-STEPCOUNT
EXCEPTIONS
BAD_PRIPARAMS = 1
BAD_XPGFLAGS = 2
INVALID_JOBDATA = 3
JOBNAME_MISSING = 4
JOB_NOTEX = 5
JOB_SUBMIT_FAILED = 6
LOCK_FAILED = 7
PROGRAM_MISSING = 8
PROG_ABAP_AND_EXTPG_SET = 9
OTHERS = 10
if sy-subrc <> 0.
WRITE: / 'JOB_SUBMIT PROBLEM ', LOCAL_JOB-JOBCOUNT,
LOCAL_JOB-JOBNAME, ABAPNAME, SY-SUBRC.
endif.
IF EMPFNAME <> SPACE.
CALL FUNCTION 'JOB_CLOSE'
exporting
AT_OPMODE = ' '
AT_OPMODE_PERIODIC = ' '
CALENDAR_ID = ' '
EVENT_ID = ' '
EVENT_PARAM = ' '
EVENT_PERIODIC = ' '
jobcount = LOCAL_JOB-JOBCOUNT
jobname = LOCAL_JOB-JOBNAME
LASTSTRTDT = NO_DATE
LASTSTRTTM = NO_TIME
PRDDAYS = 0
PRDHOURS = 0
PRDMINS = 0
PRDMONTHS = 0
PRDWEEKS = 0
PREDJOB_CHECKSTAT = ' '
PRED_JOBCOUNT = ' '
PRED_JOBNAME = ' '
SDLSTRTDT = NO_DATE
SDLSTRTTM = NO_TIME
STARTDATE_RESTRICTION = BTC_PROCESS_ALWAYS
STRTIMMED = 'X'
TARGETSYSTEM = ' '
START_ON_WORKDAY_NOT_BEFORE = SY-DATUM
START_ON_WORKDAY_NR = 0
WORKDAY_COUNT_DIRECTION = 0
RECIPIENT_OBJ = RECIPIENT_OBJ
TARGETSERVER = ' '
DONT_RELEASE = ' '
IMPORTING
JOB_WAS_RELEASED = 'X'
EXCEPTIONS
CANT_START_IMMEDIATE = 1
INVALID_STARTDATE = 2
JOBNAME_MISSING = 3
JOB_CLOSE_FAILED = 4
JOB_NOSTEPS = 5
JOB_NOTEX = 6
LOCK_FAILED = 7
OTHERS = 8
IF ( SY-SUBRC <> 0 ).
WRITE: / 'Job_Close Problem:', ABAPNAME, SY-SUBRC.
ELSE.
WRITE: / 'Job_Close done'.
ENDIF.
ELSE. "no empfname
ENDIF.
Cheers,
Vijay Raheja -
Email sending: "sending report output directly to the body of the email"
Hi
I got one requirement.this is the enhancement to already exisitng report.when user clicks on send email check box,report has to be display and this report output has to be send to email of the particular vendor. it has be seen directly in the body of the mail.not as attachement.Report output is in ALV format.Data is stored in internal table t_data.can anyone suggest what is the procedure for this.Hi i have tried the same thing and it works very fine,
i will share my code, you just follow exactly, hopefully you can solve the issue..
you refer clearly the body of the mail,
it should solve your issue/
FORM send_email .
DATA lt_message TYPE bcsy_text.
DATA lv_mail_title TYPE so_obj_des.
DATA document TYPE REF TO cl_document_bcs.
DATA recipient TYPE REF TO if_recipient_bcs.
DATA send_request TYPE REF TO cl_bcs.
DATA sent_to_all TYPE os_boolean.
DATA bcs_execption TYPE REF TO cx_bcs.
DATA wf_string(200) TYPE c.
* DATA wf_string TYPE string.
DATA doc_execption TYPE REF TO cx_document_bcs.
DATA lv_status(20) TYPE c.
DATA lv_count_email TYPE i.
DATA lv_temp_stepcount TYPE c.
LOOP AT wt_email INTO wa_email.
TRY.
CLEAR send_request.
send_request = cl_bcs=>create_persistent( ).
*Create Title
lv_mail_title = 'Report Title'.
*Create Message(EMAIL Body)
REFRESH lt_message.
APPEND '<p><b>Dear Sir/Madam,</b></p>' TO lt_message.
APPEND '<p>The following report shows the status of </p>' TO lt_message.
APPEND '<br>' TO lt_message.
APPEND '<table border= "1" color = 2>' TO lt_message.
CLEAR wf_string.
CONCATENATE '<th><tr>'
'<td>Vendor </td>'
'<td>Vendor Name</td>'
'<td>Coloun 1</td>'
'<td>Coloum 2</td>'
'</tr></th>' INTO wf_string.
APPEND wf_string TO lt_message.
LOOP AT wt_itbl INTO wa_itbl WHERE vendor = wa_email-vendor. "-> Define your Condition here wt_email( should contains vendor and its respective email id)
CLEAR wf_string.
CONCATENATE '<tr><td>' wa_itbl-vendor '</td>' INTO wf_string.
APPEND wf_string TO lt_message.
CONCATENATE '<td>' wa_itbl-Vendor_name '</td>' INTO wf_string.
APPEND wf_string TO lt_message.
CONCATENATE '<td>' wa_itbl-COL2 '</td></tr>' INTO wf_string.
APPEND wf_string TO lt_message.
CONCATENATE '<td>' wa_itbl-COL3 '</td></tr>' INTO wf_string.
APPEND wf_string TO lt_message.
ENDLOOP.
APPEND '</table>' TO lt_message.
APPEND '<br>' TO lt_message.
APPEND '<p><b>Thank You</b></p>' TO lt_message.
*Create Document
CLEAR document.
TRY.
CALL METHOD cl_document_bcs=>create_from_text
EXPORTING
i_text = lt_message
i_documenttype = 'HTM'
i_subject = lv_mail_title
RECEIVING
result = document.
CATCH cx_document_bcs INTO doc_execption.
ENDTRY.
*Add document to email
send_request->set_document( document ).
*Add recipients to send request
IF wa_email-smtp_addr IS NOT INITIAL.
recipient = cl_cam_address_bcs=>create_internet_address(
i_address_string = wa_email-smtp_addr ).
send_request->add_recipient( i_recipient = recipient ).
ENDIF.
*Send Email
CALL METHOD send_request->send
RECEIVING
result = sent_to_all.
COMMIT WORK.
IF sent_to_all EQ 'X'.
lv_count_email = lv_count_email + 1.
ENDIF.
CATCH cx_bcs INTO bcs_execption.
ENDTRY.
ENDLOOP.
IF sent_to_all = 'X'.
SKIP 2.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
ULINE /(10).
WRITE: / 'Remark : '.
ULINE /(10).
FORMAT RESET.
WRITE: / 'Email Message Sent Succesfully'.
RETURN.
ENDIF.
ENDFORM. -
How to send a report output as a FAX ?
Hallo Experts,
How to send a report output as a FAX ?
Suppose if I have all the data in an internal table, I will show it as a normal list OR ALV list output.
In the application tool bar I should have a button, and by clicking it the output should go to the customer as FAX. How can I send it to a FAX ? Any Function modules ?
Please help me with an example program.
Regards,
Matt.Hi,
Hope the code given below helps you.
FORM SEND_FAX
TABLES DOC2FAX STRUCTURE TEST_DOC
USING COUNTRY
NUMBER.
DATA: SID(5) TYPE N.
DATA BEGIN OF POPT.
INCLUDE STRUCTURE ITCPO.
DATA END OF POPT.
DATA BEGIN OF PRES.
INCLUDE STRUCTURE ITCPP.
DATA END OF PRES.
CLEAR POPT.
POPT-TDCOPIES = 1. " one copy
* POPT-TDDEST = " done internaly by script,
* POPT-TDPRINTER = " do not fill !!!
POPT-TDNEWID = 'X'. " do not reuse old spool request
POPT-TDDATASET = 'TEST'(022). " fill as you want
POPT-TDSUFFIX1 = 'FAX'(023). " fill as you want
POPT-TDSUFFIX2 = SY-UNAME. " fill as you want
POPT-TDIMMED = 'X'. " send now
POPT-TDLIFETIME = 8. " keep 8 days in spool
POPT-TDTELENUM = NUMBER. " number without country code
POPT-TDTELELAND = COUNTRY. " country of recipient
POPT-TDCOVER = 'test fax'(024).
POPT-TDCOVTITLE = 'test fax'(024).
* POPT-TDIEXIT = 'X'.
CALL FUNCTION 'PRINT_TEXT'
EXPORTING
APPLICATION = 'TX'
ARCHIVE_INDEX = ' '
ARCHIVE_PARAMS = ' '
DEVICE = 'TELEFAX' "<<< here we say: fax it !
DIALOG = 'X'
HEADER = HEADER
OPTIONS = POPT
IMPORTING
RESULT = PRES
TABLES
LINES = DOC2FAX
EXCEPTIONS
OTHERS = 01.
* do not bother with exception in sample code
* CANCELED = 01
* DEVICE = 02
* FORM = 03
* OPTIONS = 04
* UNCLOSED = 05
* UNKNOWN = 06
* FORMAT = 07
* TEXTFORMAT = 08
* EXTERNAL = 09.
IF SY-SUBRC = 0.
* arriving here means we could send:
SID = PRES-TDSPOOLID.
IF SID > '00000'.
MESSAGE S433 WITH SID.
ENDIF.
LEAVE .
ELSE.
* do not bother with exception in sample code
MESSAGE A400 WITH 'PRIN_TEXT'.
ENDIF.
ENDFORM. " SEND_FAX
Regards,
Siddarth -
How can I get a newsletter created in PDF format to appear in the body of an email I send, rather than attach it.
You cannot. (A few email programs might show it automatically; you cannot stop that either).
-
How to send ALV output data into Excel sheet format via Mail to the user?
Hi friends,
I have a doubt ie,
How to send ALV output data into Excel sheet format via Mail to the user?
regards
MoosaHi,
Provide the output internal table to the objbin in the below FM
Send Message
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = i_docdata
put_in_outbox = c_x
TABLES
packing_list = i_objpack
object_header = i_objhead
contents_bin = i_objbin
contents_txt = i_objtxt
receivers = i_reclist
and specify the document type
i_objpack-doc_type = 'XLS'.
and try.
Regards,
Nandha -
Can anyone tell me how to send a PDF file so that it opens up in the body of the email itself? Thanks
That is a function of the recipient's e-mail software understanding what your software sent. If it doesn't it will always show as an icon or attachment. It is also a function of both your internet provider and their internet provider accepting messages of that size, and a function of their download attachment settings in their e-mail program. There is no way to guarantee it will appear inline in the attachment. The best you can do is attach with Windows Friendly format. To do that, use the attach toolbar icon that looks like a paperclip, (View menu -> Customize toolbar if invisible) on Mac OS X Mail when composing the message. A checkbox appears in the file dialog box's bottom to make it Windows friendly when you navigate to pick the PDF file. That makes it as universally compatible as possible. It still may not appear inline, but at least you are less likely to be incompatible.
Maybe you are looking for
-
I have a macbook 4.1 with 4gb ram running lion. I have a 3 tb external drive that i use for time machine bakcups and a partition for my itunes library. When I want to watch a movie I connect the external hard drive to my macbook, open itunes and airp
-
"Sent Messages" folder not receiving new sent mails after a server change
My provider just moved my account to another server. The IMAP accounts needed to be re-established on my wife's PC in her program. So we know the files are all there on the new server. Funny thing is that it's not working on Mail on my iBook. And whe
-
How do i create chapters of a book in Adobe Reader?
My English 101 professor has given us thee entire text book for this semester in a .pdf file. It is very hard to navigate through. is there a way i can manually group the pages, creating chapters? i want to upload it for our entire class as a revisio
-
Where can I get a power cord in Australia?
Can anyone tell me where I can buy a power cord for iMac in Australia?
-
Now that I have a new iPhone 4S, how do I delete all the information, such as contacts, photos, messages, etc from my old iPhone 3 before i send it away for recycling? thanks