How to send an instant alert via LMS 4.2.4 when a new machine is connected

Hello,
I have LMS version 4.2.4 installed and I discovered my network.
All is ok. Now I want that LMS send me notification by mail when a new (foreign) machine is conected to my network.
Is it possible and How to do it via GUI ?

I think that you are looking for the Dynamic User Tracking function. I am looking at the Admin user guide trying to figure out how to do this. I enabled trap forwarding from fault management and now I am trying to determine what I need to do on the switches. Appendix E describes "Commands to Enable MAC Notification Traps onDevices". The manual states "The list of commands that needs to be run on the devices are stored on the built-in XML file namely, MACCommands.XML in a hierarchical manner." Ok... huh? Where is this file located? How is it used? I didn't find it in the template center. I also did a search within the CSCOpx directory and I came up empty.
Has anyone been successful getting dynamic user tracking and mac notification working correctly?
Thanks,
-Jeff

Similar Messages

How to send sms from iPad via iphone

How to send sms from iPad via iphone?

You don't easily.
The pad, with I message turned on, will send text like messages to any other ios5 user that has I message turned on.
The pad is not a phone, and does not have the radio to send 'real' SMS messages, which use the phone channel.
There are a few apps in the store that will convert messages to SMS, for use with non apple folks. Check out the app store. Search SMS.

I'm trying to get a Netgear DM111P modem to connect to my Apple and the internet. I have to enter details of my modem via the net, however I don't have a network connection when this new modem is connected. HELP?????

Hi, I'm trying to change modems as my ISP provided modem has melted. I bought a Netgear DM111P and haven't had any success in hooking this sucker up. I'm supposed to enter details into the modem, however, I can't do this on the net because I don't have access when the new modem is connected. Has anyone got a solution???

Sorry that you are having difficulties, but I'm not sure how much help we can provide for a Netgear modem on an Apple support forum. I've posted the link for the setup manual for your Netgear model in case you do not have this handy.
DM111Pv2 Setup Manual
You will need to connect your computer directly to the Netgear modem to setup the DM111P.
Once that is accomplished, you can connect the AirPort Extreme to the Netgear modem.
If you need help with the Netgear configuration, you should contact Netgear Support.
http://support.netgear.com/app/contact
Once you have the Netgear modem working with your computer, post back and we can help get the AirPort Extreme set up with the modem.

How to send a pdf file via http call

Hi Experts,
Please try to think on how you would send a file like a pdf file via the http call. You might need to convert the pdf in a character string which can be sent via http. The character string then might need to get converted back into a pdf and saved in a file. Read through the Archive Link API guide to see how they send the body of a file.
Please it is urgent......
Thanks
Basu

so you want to push the PDF file over http to external system.
where is pdf file stored.
for examle if its in the clients desktop, you can use gui_upload to upload to internal tabble (type BIN) then use FM SCMS_BINARY_TO_XSTRING to conver the binary table to type string.
then use cl_http_client class to push the file to the destination.

How to send the email alert to some users (defined users hasn't post document to a library within a specified time frame)

Hi,
Native alert on a document library can setup to email to the predefined user when any changes on the document.
However, I would like to setup a document library and alert me when
[email protected] [email protected]
[email protected] hasn't yet put a document to the library by 2014-07-01 (e.g today is 2014-06-26). The reminder email will send to
[email protected] [email protected] on 2 days before the dead line (ie. 2014-06-29) because
[email protected] and [email protected] hasn't put their file to the library on or after 2014-06-29..
Thanks

Hi,
http://stackoverflow.com/questions/17571562/creating-email-alert-workflow-for-sharepoint-file-libraries
http://stackoverflow.com/questions/18868479/how-to-send-automatic-email-notification-to-user-two-days-before-expiry-date
http://social.msdn.microsoft.com/Forums/en-US/acb12dd2-d6a5-4b7e-b233-037558bfa2e5/start-workflow-x-days-before-expiry-date?forum=sharepointcustomizationlegacy
Please remember to click 'Mark as Answer' on the answer if it helps you

How to send messages in Chinese via FIOS e-mail

My wife was previously able to write messages in Chinese on her I-Pad and send them via Comcast e-mail. When she tries to do the same on our new FIOS account, the Chinese characters are lost and replaced with question marks. Incoming Chinese messages are completely scrambled with nonsense characters. How do we rectify this issue?

Thanks for your comment.
en....I want to do something..I will maintenance a users list
in charroom.
I write a function in main.asc file , client can get users
list via call the function.
I write some codes in application.onConnect
when a user connect, it will add users list.
In application.onDisconnect, when a user disconnect, it will
remove from users list.
My hope when a user disconnect, I send a message to
shareobject. the shareobject is called in other clients.
Other client can retrieve the remove user message, they will
call the function to get new users list.
It is my idea. Can you give me some codes for my idea?
Thank you very much.

OBIEE 11g: How to send email from Analysis (via Action Framework)

Hi,
I have installed OBIEE 11g SampleAppLite in my POC box.
One of the features I want to have is to allow users to send their feedback (email) about a report to the report owner. Can this be done without launching Outlook? I tried to Invoke a Browser Script and found that I can display a form showing Recipient, Subject and Message text fields, but I do not know how to send the email.
Thanks!

Hi Devarasu,
Thanks for your reply. The link you gave is for sending iBots. But if I do this, users will not be able to send their feedback / comment.

How i send files , pic etc via bluetooth , from my i pad mini to another i pad mini ??

Im having problems working out how to send with bluetooth on my ipad mini .... i have dropbox etc , but still cant work out how to send books or pdfs or anything
could anyone help please ?thanks

You can use Photo Transfer App to transfer photos and movies
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/3af5c541040e15e3f6b 3356e4c55cbfc.jpg

Alert via text to my iphone5 when i get a email from 1 certain address

I wantto setup a alert via txt everytime igeta email from 1 certain address, anybody know how ican do this?
I have verizon wireless w/ iphone5 an residential fios service
email me if you want @ {Edited for privacy}

Hello Tonchee
If you are seeing an Apple ID that is not yours, then you have purchased content on your iPad that is tied to that Apple ID. You would need to know that password or remove the content that is associated with that Apple ID.
Using your Apple ID for Apple services
http://support.apple.com/kb/ht4895
Thanks for using Apple Support Communities.
Regards,
-Norm G.

How can I set a value in a field before create when a New button is clicked

Hi,
I am using
JDeveloper 10.1.3.1.0.3984 and
JHeadstart 10.1.3.1 release 10.1.3.1.26
I have one group and there is a detail group under that group.
From main group to detail group there are 3 field relating those groups.
field1
field2
fieldSEQ (auto-generated by database trigger)
These 3 fields are PK.
In the detail group, there is a New button. So, when the New button is clicked, it tries to create the record with those 3 fields value as those are coming from main group. As a result it's giving the duplicate error as that record already exists in the table.
But I don't want to create the record with that SEQ as that will be created in the trigger.
How can I set the SEQ temporarily any no. (-1) before create when the New button is clicked?
Can anybody help?
Thanks
Syed Jabbar
University of Windsor
Windsor, ON, Canada

Hello Syad,
What I would suggest is setting the sequence number at the creation of the entity object (so in the create() method) by using the database sequence. This way it will always be unique.
So something like:
protected void create(AttributeList AttributeList) {
super.create(AttributeList);
SequenceImpl sequence =
new SequenceImpl("KCP_SEQ", getDBTransaction());
setFieldSeq( sequence.getSequenceNumber());
If this still does not solve it: please go to the ADF Forum since this problem is an ADF problem, not a JHeadstart problem.
Regards,
Evert-Jan de Bruin
JHeadstart Team.

How to send e-mail alert to the user job is successful or failed.

Hi Experts,
I have scheduled a job using DBMS_JOB Package; in this job I am calling a procedure.
How can we send an e-mail(alert) to the user if the job is successful (or) job fails.
If the job is successfully completed, then we have to send mail as “Job is completed successfully along with job name”.
If the job fails we have to send email as “error message of the job along with job name”(why the job is failed).
This alert should be sending automatically no manual intervention.
Please help me.
     CREATE OR REPLACE PROCEDURE APPS_GLOBAL.arc_procedure (P_ID IN NUMBER)
     IS
     CURSOR C IS SELECT id,table_name,archive_table_name,where_condition
     FROM apps_global.control_ram
     WHERE id = p_id
     ORDER BY id, table_name;
     BEGIN
        FOR I IN C
        LOOP
           EXECUTE IMMEDIATE
              'INSERT INTO '
           || I.ARCHIVE_TABLE_NAME
           || '
     (SELECT * FROM '
           || I.TABLE_NAME
           || ' WHERE '
           || I.WHERE_CONDITION
           || ')';
           EXECUTE IMMEDIATE
              'DELETE FROM '
           || I.TABLE_NAME
           || ' WHERE '
           || I.WHERE_CONDITION
           || '';
           COMMIT;
        END LOOP;
     EXCEPTION
        WHEN OTHERS
        THEN
           ROLLBACK;
           DBMS_OUTPUT.PUT_LINE (
           'An error was encountered - ' || SQLCODE || ' -ERROR- ' || SQLERRM);
     END arc_procedure;
     /This is my job.
DECLARE
X NUMBER;
BEGIN
SYS.DBMS_JOB.SUBMIT
( job       => X
   ,what      => 'APPS.arc_procedure(1);'
   ,next_date => to_date('05/01/2013 00:00:00','dd/mm/yyyy hh24:mi:ss')
   ,interval => 'TRUNC(SYSDATE+1)'
   ,no_parse => FALSE
SYS.DBMS_OUTPUT.PUT_LINE('Job Number is: ' || to_char(x));
COMMIT;
END;
/Thanks in advance.

Hi,
I think you can do by creating mailing procedures and call it in the loop and outside the loop.
There would be two procedure one in inside loop which will execute after successfull completion of the loop.
Other would be in the exception block like i shown in the below code you have written;
V_variable_1 you can use as a parameter for what is the error occured.
like suppose your mailing procedure name is Status_email and Status_email_1.
CREATE OR REPLACE PROCEDURE APPS_GLOBAL.arc_procedure (P_ID IN NUMBER)
     IS
     CURSOR C IS SELECT id,table_name,archive_table_name,where_condition
     FROM apps_global.control_ram
     WHERE id = p_id
     ORDER BY id, table_name;
V_VARIABLE_1 NUMBER;
V_VARIABLE_2 VARCHAR2(400);
     BEGIN
        FOR I IN C
        LOOP
           EXECUTE IMMEDIATE
              'INSERT INTO '
           || I.ARCHIVE_TABLE_NAME
           || '
     (SELECT * FROM '
           || I.TABLE_NAME
           || ' WHERE '
           || I.WHERE_CONDITION
           || ')';
           EXECUTE IMMEDIATE
              'DELETE FROM '
           || I.TABLE_NAME
           || ' WHERE '
           || I.WHERE_CONDITION
           || '';
           COMMIT;
                 STATUS_EMAIL;
        END LOOP;
     EXCEPTION OTHERS THEN
V_VARIABLE_1 :=SQLCODE;
V_VARIABLE_2 :=SQLERRM;
           ROLLBACK;
STATUS_EMAIL_1(V_VARIABLE_1,V_VARIABLE_2);
     END arc_procedure;
     / You can refer to sample email procedure i have created for you.
CREATE OR REPLACE PROCEDURE STATUS_EMAIL
AS
   v_From       VARCHAR2(80) := 'EMAIL_ID';
   v_Recipient VARCHAR2(80) := 'EMAIL_ID';
--YOU CAN SEND EMAIL TO MORE THAT ONE USER SO YOU CAN USE LIKE BELOW VARIABLE....
   v_Recipienttt VARCHAR2(80) := 'EMAIL_ID';
   v_Subject    VARCHAR2(80) := 'SUBJECT_FOR_THE_MAIL';
   v_Mail_Host VARCHAR2(30) := 'MAIL_SERVERS_HOST_IP(SMTP_SERVER)';
   v_Mail_Conn utl_smtp.Connection;
   crlf         VARCHAR2(2) := chr(13)||chr(10);
BEGIN
v_Mail_Conn := utl_smtp.Open_Connection(v_Mail_Host);
utl_smtp.Helo(v_Mail_Conn, v_Mail_Host);
utl_smtp.Mail(v_Mail_Conn, v_From);
utl_smtp.Rcpt(v_Mail_Conn, v_Recipient);
utl_smtp.Rcpt(v_Mail_Conn, v_Recipienttt);
--OPEN DATA CONNNECTION
UTL_SMTP.OPEN_DATA(v_mail_conn);
--MAIL HEADER
utl_smtp.write_DATA(v_Mail_Conn,'Date: '   || to_char(sysdate, 'DD-MON-YYYY hh:mi:ss AM') || crlf);
utl_smtp.write_DATA(v_Mail_Conn,'From: '   || v_From || crlf );
utl_smtp.write_DATA(v_Mail_Conn,'Subject: '|| v_Subject || ||crlf);
utl_smtp.write_DATA(v_Mail_Conn,'To: '     || v_Recipient || crlf);
utl_smtp.write_DATA(v_Mail_Conn,'Cc: '       || v_Recipienttt ||','|| crlf);
--MAIL BODY
utl_smtp.write_DATA(v_Mail_Conn,'MIME-Version: 1.0'|| crlf );
utl_smtp.write_DATA(v_Mail_Conn,'Content-Type: multipart/mixed;'|| crlf );
utl_smtp.write_DATA(v_Mail_Conn,' boundary="-----SECBOUND"'|| crlf ||crlf );
utl_smtp.write_DATA(v_Mail_Conn,'-------SECBOUND'|| crlf );
utl_smtp.write_DATA(v_Mail_Conn,'Content-Type: text/plain;'|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,'Content-Transfer_Encoding: 7bit'|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,'Procedure is successfully complited without error'|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,null|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,null|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,null|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,'Dear All, '|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,'Procedure is successfully complited without error'||'.' ||crlf);
utl_smtp.write_DATA(v_Mail_Conn,null|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,null|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,null|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,null|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,'Regards, '|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,null|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,'any_name '|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,null|| crlf);
utl_smtp.write_data(v_Mail_Conn, utl_tcp.CRLF ||'This mail is auto generated.');
--CLOSE CONNECTION
UTL_SMTP.CLOSE_DATA(v_mail_conn);
utl_smtp.Quit(v_mail_conn);
EXCEPTION
WHEN utl_smtp.Transient_Error OR utl_smtp.Permanent_Error then
    raise_application_error(-20000, 'Unable to send mail: '||sqlerrm);
END;
/cheers..

How to send mails through Alerts.

Hi All,
I have an requirement to send email to different user periodically after checking some condition in HRMS application.Initially I was trying with the help of JAVA Api.Now while R & D I found that I can do it by using Oracle Alerts.but I dont know How to do this.
Please Help.
Regards,
SHD

What is the application release?
Please see "Oracle Alert" manual.
Oracle Alert User's Guide
http://download.oracle.com/docs/cd/B25516_18/current/acrobat/115alrug.pdf
Oracle Alert User's Guide
http://download.oracle.com/docs/cd/B53825_03/current/acrobat/121alrug.pdf
Note: Please post similar questions in the appropriate forum.
EBS General Discussion
General EBS Discussion
Thanks,
Hussein

How can I receive Apple alert via iCloud mail system?

Currently my login ID is the same as my Gmail address.
So, my Apple alert (that lets me know about my account info change or new login) comes to my Gmail inbox.
However, I want to receive these stuff via iCloud mail so that I can collect my Apple alert in my iCloud mailbox.
How can I do this?
I'm now using my iCloud mail address with my account of which name is my Gmail address.
Or, if possible, I want to use only my iCloud mail address as my main ID and totally get rid of my Gmail address from my Apple account.
Plz give me a tip.
Have a nice day.

If you don't know your ID, you can try to find it as explained here: http://support.apple.com/kb/HT5625. If you don’t know your password you can reset the password as explained here: http://support.apple.com/kb/PH2617.

How to send command to device via HTTP

Hy everyone,
i have installed olite on a number of wince device.
If i try to send command to the device when connected with the desktop computer on wich the mobile server is installed everything goes well.
My devices are connected by wifi to the lan of my company and i would like to send command via HTTP.
I tried to change the settings on the mobile server setting the Network Protocol to HTTP and setting the ip of the device but it does not work.
Does anyone know how to solve the problem?
David.

Hi Ravi,
yes the command is queued but anything happens.
I tried to wait for long time but the command never succeed to execute.
If i try to send again the command from the Command History windows the command fails.
David.

How to send an XML file via HTTP_POST

I have an ABAP program that creates an XML file and I need to somehow post this XML file to a webserver and read the HTTP Response that it sends back. I see that there is a function module called HTTP_POST but I've never used it before. I also see that there are a number of ABAP Objects related to HTTP. Has anyone done this before.
I'm on SAP 4.7 (6.20)
Thank you,

I went to www.fedex.com and exported their SSL cert. I then imported it into SAP via STRUST. However, I still get the same http_communication_error. The XML needs to be posted to this address: 'https://gatewaybeta.fedex.com:443/GatewayDC'
Here is my code:
Note: wf_string contains the XML
CALL METHOD cl_http_client=>create
EXPORTING
    host          = 'https://gatewaybeta.fedex.com'
    service       = '443'
    scheme        = '2'
   proxy_host    = wf_proxy
   proxy_service = wf_port
IMPORTING
    client        = http_client.
http_client->propertytype_logon_popup = http_client->co_disabled.
wf_user = '' .
wf_password = '' .
proxy server authentication
CALL METHOD http_client->authenticate
EXPORTING
    proxy_authentication = 'X'
    username             = wf_user
    password             = wf_password.
CALL METHOD http_client->request->set_header_field
EXPORTING
    name = '~request_method'
    value = 'POST'.
CALL METHOD http_client->request->set_header_field
EXPORTING
    name = '~server_protocol'
    value = 'HTTP/1.1'.
CALL METHOD http_client->request->set_header_field
EXPORTING
    name = '~request_uri'
    value = 'https://gatewaybeta.fedex.com:443/GatewayDC'.
CALL METHOD http_client->request->set_header_field
EXPORTING
    name = 'Content-Type'
    value = 'text/xml; charset=utf-8'.
CALL METHOD http_client->request->set_header_field
EXPORTING
    name = 'Content-Length'
    value = txlen.
*CALL METHOD http_client->request->set_header_field
EXPORTING
   name = 'SOAPAction'
   value = 'https://gatewaybeta.fedex.com:443/GatewayDC'
CALL METHOD http_client->request->set_cdata
EXPORTING
    data   = wf_string
    offset = 0
    length = rlength.
CALL METHOD http_client->send
EXCEPTIONS
    http_communication_failure = 1
    http_invalid_state         = 2.
CALL METHOD http_client->receive
EXCEPTIONS
    http_communication_failure = 1
    http_invalid_state         = 2
    http_processing_failed     = 3.
CLEAR wf_string1 .
wf_string1 = http_client->response->get_cdata( ).

How to send an instant alert via LMS 4.2.4 when a new machine is connected

Similar Messages

Maybe you are looking for