How to send data from BW to third party

Hi Gururs,
We got one of my requirement that we have to send 2 files (delta and full file) from BW to Third Party system. For the delta files we have to send an after-image and we are using FI datasource.Could anybody can tell how to design it?
1. is that advicable to use the FI datasource directly to infocube as the FI datasource is AIE extractor?
2.Can we the use BWA in APD. If yes how?
3.To send an files to third party which concept can we use APD or OHD. We advised to used OHD ,but the clients are not agreeing. They asking why we cant use APD? They saying APD will be more performance. Could u pls tell why and how?
Thanks in advance...

Hi,
It is not advaisable to load FI data to IC directly, must load to DSO first.
- If client asking to use APD, you cah go ahead.
SOURCE - DSO and capture deltas
Transformation
Target - Flat File
Use-
APD helps to identify hidden or complex relationships between data in a simple way. Various data transformations are provided for this purpose, such as statistical and mathematical calculations, and data cleansing or structuring processes
Regards,
rvc

Similar Messages

Sending Data from BI to Third Party System through CIB Interface

Hi Experts ,
We have a requirement where we need to send data from BI to any Third Party System through CIB Interface . We do not have to use the OHD's . Please share the documents for the same .
Regards
Garima

Hi,
My problem is solved.
Sol: Getting wrong data from third party sytem. They are adding spaces in front of the payload and end of the payload so it was not processing. After deleting that spaces its is working fine.
Thanks for your help.
Thanks & Regards,
Purshothamm

IDOC :: how to send data from Custom Infotype in SAP HR to third party

Hi,
I have created one custom Infotype by number 9020. How to send data from this infotype to third party system and also change pointers need to trigger for this infotype.
Please help me in doing it.
I am using one Custom Message type ZTALENT and Custom Idoc Type ZTALENT.
                                                                                ZTALENT                        Talent Management
5 E1PLOGI                        Header for an HR Object (Master Data or Organizational Data)
5 E1PITYP                        HR: Transported Infotypes and Subtypes for an Object
ZPUSER                         User base Data File
                ZPERSON                        Personal Information File Segment
                ZPOST                          Position File
                ZOPE                           Overall Performance
                ZPWORK                         Outside Work Experience
                ZPEDUC                         Education Details of Employee
                E1P0000                        HR: HR Master Record Infotype 0000 (Actions)
                E1P0001                        HR: HR Master Record Infotype 0001 (Org. Assignment)
                E1P0002                        HR: HR Master Record Infotype 0002 (Personal Data)
                E1P0016                        HR Master Record: Infotype 0016 (Contract Elements)
                E1P0022                        HR Master Record: Infotype 0022 (Education)
                E1P0023                        HR Master Record: Infotype 0023 (Other/Previous Employers)
                E1P0041                        HR Master Record: Infotype 0041 (Date Specifications)
                E1P0105                        HR: HR Master Record Infotype 0105 (Communications)
               ZE1P9020
                ZPLANG                         Language Details
                ZACTION                        Actions Changes
Regards,
Krishna

Hello Shankar,
         Technically TEMSE files are read by calling the following 3 function modules in sequence,
              1) RSTS_OPEN_RLC or RP_TS_OPEN: open the temse object
              2) RSTS_READ : read the object
              3) RSTS_CLOSE: close the object
Regards,
Rajesh

How to send data from internal table to the shared folder in ABAP

Hi experts,
My requirement is to transfer data from a file to shared folder. i just did reading data from a file to a internal table. Now i want to send this internal table data into a shared folder which is "
xxx\y\z....".
I do not have any idea on how to send data from internal table to the shared folder path.
can anybody please help me out how to do this?
Thanks & Regards
Sireesha.

Where that folder is located, its on presentation server i.e. desktop or application server.
If its on presentation server, use FM GUI_UPLOAD.
If its on application server, then use DATASET functions. Have a look at below link.
[File Handling in ABAP|http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3ca6358411d1829f0000e829fbfe/frameset.htm]
I hope it helps.
Thanks,
Vibha
Please mark all the useful answers

EPM add-in for Excel question : How to send data from local member?

Dear experts,
for EPM add-in for excel, how do I send data from local member?
best regards,
Evans.

Hello Evans,
Could you please explain what is your requisite? What is the formula on your local member?
You can also apply formulas to formatting sheet. This way you can reference the cells in your formatting sheet formulas and save the values in the report area.
Please check this blog:
How to use Excel formulas in BPC Input Schedules
Thank you
Best regards,
Raquel Oliveira

How to send job postings to multiple third party sites using the XML output

Dear Friends,
We are Implementing Irecruitment for our client, Client requirement is how can we send job postings to multiple third party sites using the XML output from i-Recruitment
With regards
Surya
.

Can you be more specific about your Requirement. In General, Please navigate to iRecruitment Recruiter Responisbility.
Then Select, Setup > Recruiting Sites. Here, you can configure your Third Party Websites information and attach stylesheets. The default mode oracle sends the vacancy information is HR-XML Format.
If you would like to select more sites information select "Add Another Row".
Then, you can see this information while "New Vacancy Creation Process".
iRecruiter.
Edited by: iRecruiter on Oct 18, 2009 7:43 AM

How to send data from a web dypro application using workflow

Hi All,
I am working on a web dynpro application where the user will enter the header and item details for a FI document to be posted. Once the user enters the data the workflow should initiate and should also send the data across to the approver to approve. To initiate the workflow I am using the function module 'SAP_WAPI_START_WORKFLOW' and it's working fine and generating a uniquw workflow item id. Now my main concern is how to send the data across from web dynpro application through the workflow. I have my data in three internal tables: 1. header table. 2. G/L table and 3. Currency table, I am capturing all this data from the web dypro screen entered by the user. Right now I have the following code in my web dypro application.
METHOD execute_bapi_acc_document_post .
DATA: return TYPE TABLE OF bapiret2.
DATA: wa_return LIKE LINE OF return.
DATA lo_bapi_acc_document_po TYPE REF TO if_wd_context_node.
DATA lo_changing TYPE REF TO if_wd_context_node.
DATA lo_accountgl TYPE REF TO if_wd_context_node.
DATA lo_currencyamount TYPE REF TO if_wd_context_node.
DATA lo_importing TYPE REF TO if_wd_context_node.
DATA lo_documentheader TYPE REF TO if_wd_context_node.
DATA lo_element TYPE REF TO if_wd_context_element.
DATA lt_elements TYPE wdr_context_element_set.
DATA ls_c_documentheader TYPE if_componentcontroller=>element_documentheader.
DATA lt_c_accountgl TYPE if_componentcontroller=>elements_accountgl.
DATA ls_c_accountgl LIKE LINE OF lt_c_accountgl.
DATA lt_c_accountgl_cp TYPE if_componentcontroller=>elements_accountgl.
DATA lt_c_currencyamount TYPE if_componentcontroller=>elements_currencyamount.
DATA ls_c_currencyamount LIKE LINE OF lt_c_currencyamount.
DATA lt_c_currencyamount_cp TYPE if_componentcontroller=>elements_currencyamount.
DATA wa_c_currencyamount type bapiaccr09.
CALL FUNCTION 'SAP_WAPI_START_WORKFLOW'
EXPORTING
    TASK                      = 'TSXXXXXXXXXX'
   USER                      = sy-uname
IMPORTING
   RETURN_CODE               = L_RETURN_CODE
   WORKITEM_ID               = LV_WIID
TABLES
*   INPUT_CONTAINER           = lt_input_container
   MESSAGE_LINES             = lt_message_lines
   AGENTS                    = ls_agents
lo_bapi_acc_document_po = wd_context->get_child_node( wd_this->wdctx_bapi_acc_document_po ).
lo_changing = lo_bapi_acc_document_po->get_child_node( wd_this->wdctx_changing ).
lo_accountgl = lo_changing->get_child_node( wd_this->wdctx_accountgl ).
lo_currencyamount = lo_changing->get_child_node( wd_this->wdctx_currencyamount ).
lo_importing = lo_bapi_acc_document_po->get_child_node( wd_this->wdctx_importing ).
lo_documentheader = lo_importing->get_child_node( wd_this->wdctx_documentheader ).
lo_element = lo_documentheader->get_element( ).
lo_element->get_static_attributes(
    IMPORTING static_attributes = ls_c_documentheader ).
lt_elements = lo_accountgl->get_elements( ).
LOOP AT lt_elements[] INTO lo_element.
    lo_element->get_static_attributes( IMPORTING static_attributes = ls_c_accountgl ).
    INSERT ls_c_accountgl INTO TABLE lt_c_accountgl[].
ENDLOOP.
lt_c_accountgl_cp = lt_c_accountgl[].
lt_elements = lo_currencyamount->get_elements( ).
LOOP AT lt_elements[] INTO lo_element.
    lo_element->get_static_attributes( IMPORTING static_attributes = ls_c_currencyamount ).
    INSERT ls_c_currencyamount INTO TABLE lt_c_currencyamount[].
ENDLOOP.
lt_c_currencyamount_cp = lt_c_currencyamount[].
READ TABLE lt_c_currencyamount INTO ls_c_currencyamount INDEX 2.
ls_c_currencyamount-amt_doccur = ls_c_currencyamount-amt_doccur * '-1.0000'.
MODIFY lt_c_currencyamount FROM ls_c_currencyamount INDEX 2.
CALL FUNCTION 'BAPI_ACC_DOCUMENT_POST'
    EXPORTING
      documentheader = ls_c_documentheader
    TABLES
      accountgl      = lt_c_accountgl
      currencyamount = lt_c_currencyamount
      return         = return.
ENDMETHOD.
Please suggest.
Thanks,
Rajat
I am not sure if this falls in webdynpro or workflow threads.. so I am posting it here also
Edited by: rajatg on Jun 23, 2010 9:28 PM

Dear Colleague,
You have different method to send parameters to Workflow.
1. Method
Container Set Element
DEFINE SWC_SET_ELEMENT.
CALL FUNCTION 'SWC_ELEMENT_SET'
    EXPORTING
      ELEMENT   = &2
      FIELD     = &3
    TABLES
      CONTAINER = &1
    EXCEPTIONS
      OTHERS    = 1.
END-OF-DEFINITION.
Set the data into Workflow container
    SWC_SET_ELEMENT IT_CONTAINER 'parameter1' lv_parameter1.
Start the Workflow
    CALL FUNCTION 'EWW_WORKFLOW_START'
      EXPORTING
        X_TASK          = 'WS90000001'   " your wf
      IMPORTING
        Y_WORKFLOW_ID   = WF_ID " your workitem id
      TABLES
        X_CONTAINER     = IT_CONTAINER
      EXCEPTIONS
        INVALID_TASK    = 1
        NO_ACTIVE_PLVAR = 2
        START_FAILED    = 3
        GENERAL_ERROR   = 4
        OTHERS          = 5.
2. Method,
You can also add your parameters direly to a container,
DATA: lt_simple_container TYPE TABLE OF swr_cont,
        ls_simple_container TYPE swr_cont.
ls_simple_container-element = 'parameter1'.
ls_simple_container-value = lv_parameter1.
APPEND ls_simple_container TO lt_simple_container.
CALL FUNCTION 'SAP_WAPI_WRITE_CONTAINER'
    EXPORTING
      workitem_id      = WF_ID " your workitem id
      do_commit        = 'X'
    TABLES
      simple_container = lt_simple_container.
Bulent.

How to send data from WEBI HYPERLINK to SAP R/3

Can someone please help in sending the data from WEBI to R/3 system.
We created a universe on top of a BEX Query and on Top of that we created a web intelligence report.
Now our requirement is when we click on any record in BO web ntelligence report that data should get populated in SAP R/3 system FAGLL03 screen . How to send the data from WEBI to R/3 system.
Edited by: SAP BPS on Feb 5, 2010 6:23 AM

Herry,
You can refer the below docs for reference. Instead of receiver JDBC , you have to use Receiver as R/3.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a068cf2f-0401-0010-2aa9-f5ae4b2096f9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f272165e-0401-0010-b4a1-e7eb8903501d
I hope it helps.
Best regards,
raj.

How to send data from HR system to PI system

Hi All,
I need to write a program that pulls the data from HR system and pushes it to PI system.I pretty much have the logic to pull the HR data but I would like to know the steps involved in pusing the data to PI system and how much time does it take approximately
Thanks
Bala Duvvuri

Hi Bala,
Proxies are used to send data to the PI system.
Hence you will have to create ABAP Proxies which will extract the data and send it to the PI System.
Regards,
Samreen.

How to send data from 4 different data sources to one ODS

Hello Gurus,
There is a transaction called KSB1 in R/3.
It has data related to cost center , cost element, G/L .
In BI, i need to transfer the data from these Data sources to one ODS.
Can any body give me some idea.
Points will be awarded for any kind of response .
Thanks .
Anu

Hi Rupa..
In your requirement some data sources (Cost centre, Cost element) are master data sources.
They are available as info Objects in BI (Content).
So there is no need to create ODS on these.
But the general scenario for creating ODS from multiple data sources in case of Transaction documents
Like :
PO header, PO line items...
For this the Pre-requisite is to have common fields between these data sources (eg PONo).
Hope this gives idea for u....
Cheers...
Varma

APO/BW: How to get back from APO to BW/ How the send data from BW to APO

Hi,
1. I read that BW is the data layer for APO DP and therefore, I expected data to flow from BW, the data layer, to APO DP but not the reverse. Yet, I also read that data can be transferred from Livecache back to BW by using the extractor technology from BW. Can you clarify this for me?
2. If possible, please provide the steps to use this extractor technology to extract data back to BW in detail so that I can try it.
Thanks

Hi Amanda,
1. The data flow is from BW to APO, and from APO to BW.
from bw to apo, to feed planning area, characteristic value combination, in APO we have infocube to feed the data, as we know APO has BW inside (all the tcodes RSA1 etc are valid), datamart scenario is used here, we create infocube in APO, update rules, infosource and assign datasource from BW.
The data flow from APO to BW, to get the plan data inputted by user, we generate datasource in APO from planning area (compare with 'generate export datasource' from infocube), transaction /SAPAPO/SDP_EXTR. 'extractor technology' here in practice is just like when we are using datasource
take a look
http://help.sap.com/saphelp_scm50/helpdata/en/c9/199170f13711d4b2f20050da385632/frameset.htm
2. as mentioned in #1, you can use the transaction /SAPAPO//SAPAPO/SDP_EXTR to handle planning area-datasources in APO, or /SAPAPO/MSDP_ADMIN - planning area; choose your planning area, and menu extractor tools (or generate datasources), again datamart scenario is used here, after the datasource generated in APO, it's replicated in BW (APO act as source system), the rest steps are just same as when extract data from other SAP source system
simply what you need to practice is /SAPAPO/SDP_EXTR to 'generate export datasource', the rest steps should be familiar already for you
check
http://help.sap.com/saphelp_scm50/helpdata/en/8f/9d6937089c2556e10000009b38f889/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/e0/9088392b385f6be10000000a11402f/frameset.htm
hope this helps.

How to send HTTP Post to URL (third party software) in JSP/JSPDynpage

Hello,
we want to integrate a third party application in our Portal Component (JSPDynpage using JSP and HTMLB). This third party component is called like this:
http://servername:port/cgi-bin/cgi.exe?request=map&format=html&swldy_ace=GDF&swldy_image_format=p n g&width=525&height=375
How can we do this in the JSP using HTMLB?
Thanks for your help.
Best regards,
Daniel

Hi Detlev,
thanks for your hint regarding the App. Integrator, but it seemn not to be what we want to do: We call a CGI and get a JEPG Image back as request.
Now we used the java.net.URLConnection to do the HTTP post in the JSPDynpage:
// send HTTP POST
try {
u = new URL("http://server/path/ourcgi.exe");
} catch(MalformedURLException ex) {
System.err.println("MalformedURLException");
// build query sting
String query = "request=plot&format=jpeg&template_name=......."
int cl = query.length();
try {
// open the connection and prepare it to POST
URLConnection uc = u.openConnection();
uc.setDoOutput(true);
uc.setDoInput(true);
uc.setAllowUserInteraction(false);
DataOutputStream dos = new DataOutputStream(uc.getOutputStream());
dos.writeBytes(query);
dos.close();
} catch ...
Best regards,
Daniel

How to send data from database to textimput

How to do this correct?
[php]
if ($_POST['request'] == "pokazOnas") {
     $sql = mysql_query("SELECT text FROM podstrony WHETE podstrona=Onas");
     $result = "";
     $result .= '<tab>';
     while($row = mysql_fetch_array($sql))
         $result .= "<element text='".$row['text']."' />";
     $result .= '</tab>';
     echo $result;
[/php]
[html]<mx:List width="701" dataProvider="{pokazOnas.lastResult.tab.element}">
                <mx:TextInput id="tekst_Onas" width="700" height="440" text="tab.selectedItem.text"/>
</mx:List>
         <mx:HTTPService id="pokazOnas" url="http://localhost/server-debug/form.php"
                     method="POST">
                         <mx:request>
                             <request>pokazOnas</request>
                         </mx:request>
         </mx:HTTPService>[/html]
Error:
Severity and Description    Path    Resource    Location    Creation Time    Id
Multiple initializers for property 'dataProvider'. (note: 'dataProvider' is the default property of 'mx.controls.List').

Try this:
<mx:List width="701" dataProvider="{ pokazOnas.lastResult.tab.element }">
    <mx:itemRenderer>
      <mx:Component>
          <mx:TextInput width="700" height="440" text="{data.text}"/>
      </mx:Component>
    </mx:itemRenderer>
</mx:List>
Or the following may suit your needs:
<mx:List
      width="701"
      dataProvider="{ pokazOnas.lastResult.tab.element }"
      itemRenderer="mx.controls.TextInput"
      labelField="text"
      rowHeight="440"/>
Take a look at this link for more item renderer options:
http://www.adobe.com/devnet/flex/quickstart/using_item_renderers/

How to send data from popup window to parent window

Hi,
I need help some like this
I have parent window ,in that i am clicking + button one dynamic row should add and one popup window has to diplay .Popup window contain 3 comboboxes and 5 text boxes. Once i am clicking OK button in popup window those values has to display at specified row in parent window
Kindly help me ,
Thanks
jyothi

See this
http://www.oracle.com/technology/products/jdev/101/howtos/jsfdrilldown/index.html

Steps to send data from BI 7.0 to PI in XML format...

Hello everybody,
Can somebody share any direct link to a document or thread where I can find step by step details as to how to send data from BI 7.0 to PI in XML format?
I extracted data from ODS objects into CSV files through Open Hub Destination before, but need to know how to send same ODS data from BI to PI in XML format...
Thanks in advance.
~S.H.

just an idea:
Maybe one way could be creating xml data via simple transformation or standard transformation in sap bw. After maybe there could create an inbound message in xi for getting the data.
I never done it, but I thought this could be a practice?
Hope there will be better comments for that problem, soon!

How to send data from BW to third party

Similar Messages

Maybe you are looking for