How to send digital waveform to the DAC?

How to send digital waveform, obtained by Function Generator.vi to the Digital-Analog Converter? What kind of subVIs I have to use for this? I have LabView_5.0 on MacOS.

The 6032 is not a GPIB board. It is a DAQ board board and has 2 16-bit analog outputs, 8 16-bit outputs (16 single-ended), and 8 digital i/o lines. I don't know what you mean that a MIO16/LPM16 is connected to it. There are a lot of example VIs that ship with LabVIEW. Select Find Examples from the help menu and look under Hardware Input and Output. LabVIEW 7 has some under DAQmx>Analog Generation and older versions of LabVIEW have them under DAQ>Analog Output.

Similar Messages

I have finally set up a group in my contacts. Can anyone please tell me how to send an email to the entire group? running Mavericks on iMac

I have finally set up a group in my contacts. Can anyone please tell me how to send an email to the entire group? running Mavericks on iMac

Drag the entire group into the To: field of a new message. The group is in your Address Book. You've used a name for it, like My Group. You can simply start typing "My Group" in that To: field and it should appear in a context menu.

How to send external mails to the user

Dears,
How to send external mails to the user who creates the sales document (Quotation)
Can you please suggest what modification required in the FM
Thanks,
pinky

You can have a partner function like 'Created by' and use an exit to populate the User ID to this partner function(dont have the system right now but i think this can be done with standard partner detr. procedure also)
Then, create an Output type for that Partner function with transmission medium as 'External Send'. You can use the standard SAP program to trigger the email. To send the actual email after the output is trigerred, the link connection has to be set up be BASIS but if you want to check, then goto SOST and see if the email got trigerred or not.

How to sending simple text in the mail body

Hi friends,
             How to send simple text in the mail body through ABAP code
   plz send me the related code and setting for that mail.
Thanks&Regards,
Srinivas

try this...
FORM send_file_as_email_attachment .
DATA: objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: objpack LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
DATA: objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
DATA: reclist LIKE somlreci1 OCCURS 5 WITH HEADER LINE.
DATA: objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA : i_body TYPE soli_tab WITH HEADER LINE.
DATA: it_attach LIKE it_display1 OCCURS 0 WITH HEADER LINE.
DATA: doc_chng LIKE sodocchgi1.
DATA: tab_lines LIKE sy-tabix.
DATA: att_lines TYPE i.
DATA: lv_lines TYPE i.
DATA: file TYPE string.
data: g_datum like sy-datum.
data: g_datum1(10) type c.
DATA: len TYPE n.
LOOP AT it_email.
    CLEAR : objpack,
            objhead,
            objbin,
            objtxt,
            reclist.
    REFRESH: objpack,
             objhead,
             objbin,
             objtxt,
             reclist.
    g_datum =     sy-datum - 1.
    concatenate g_datum6(2) '.' g_datum4(2) '.' g_datum+0(4) into
    g_datum1.
doc_chng-obj_descr = 'Aged Stock more than 45 Days'.
    CONCATENATE 'Aged Stock more than 45 Days' '-' it_email-vkbur INTO
    doc_chng-obj_descr.
    CONCATENATE 'Please find enclosed Aged Stock Details ( >45days ) report as on'
    g_datum1
    INTO objtxt-line SEPARATED BY space.
    APPEND objtxt.
    objtxt-line = ' '.
    APPEND objtxt.
    objtxt-line = 'Regards'.
    APPEND objtxt.
    objtxt-line = 'LIS SAP Projects'.
    APPEND objtxt.
    objtxt-line =
    'PS: Pls send feedback for futher improvements to SAP office.'.
    APPEND objtxt.
    DESCRIBE TABLE objtxt LINES tab_lines.
    READ TABLE objtxt INDEX tab_lines.
    doc_chng-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
   CLEAR objpack-transf_bin.
    objpack-head_start = 1.
    objpack-head_num = 1.
    objpack-body_start = 1.
    objpack-body_num = tab_lines.
    objpack-doc_type = 'TXT'.
   objpack-obj_name = 'Run_prog'.
   objpack-obj_descr = 'Agestock.txt'.
   lv_lines = tab_lines.
    APPEND objpack.
*CONCATENATE 'Plant'   'Material Number' 'Qty(More than 45days)'
*'Amount' INTO
       it_display SEPARATED BY space.
       append objbin.
       clear: objbin.
    CLEAR:it_display2.
    REFRESH it_display2.
    it_display2-werks = 'Plant|'.
    it_display2-matnr = 'Material Number'.
    it_display2-qty = '|Qty > 45 days'.
    it_display2-amount = '      |Amount'.
    APPEND it_display2.
    it_display2-werks = ''.
    it_display2-matnr = ''.
    it_display2-qty = ''.
    it_display2-amount = ''.
    APPEND it_display2.
    CLEAR : it_display2.
    sort it_display1 by amount descending.
    LOOP AT it_display1 WHERE werks = it_email-vkbur.
     AT FIRST.
*CONCATENATE 'Plant    '   'Material Number' 'Qty(More than 45days)'
*'Amount' INTO
       objbin-line SEPARATED BY space.
       append objbin.
       clear: objbin.
     ENDAT.
      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
        EXPORTING
          input = it_display1-matnr
        IMPORTING
          output = it_display1-matnr.
      it_display1-qty = TRUNC( it_display1-qty ).
      MOVE-CORRESPONDING it_display1 TO it_display2.
      APPEND it_display2.
      CLEAR:it_display1,it_display2,objbin.
      CLEAR:it_display1.
    ENDLOOP.
    objbin[] = it_display2[].
    DESCRIBE TABLE objbin LINES tab_lines.
    objhead = 'Suug'.
    APPEND objhead.
    objpack-transf_bin = 'X'.
    objpack-head_start = 3.
    objpack-head_num = 1.
    objpack-body_start = 1.
    objpack-body_num = tab_lines.
    objpack-doc_type = 'RAW'.
    objpack-obj_name = 'Run_prog'.
    objpack-obj_descr = 'Agestock.txt'.
    APPEND objpack.
    reclist-receiver = '[email protected]'.
    reclist-rec_type = 'U'.
    APPEND reclist.
=====================================================================
    CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
      EXPORTING
        document_data              = doc_chng
        commit_work                = 'X'
      TABLES
        packing_list               = objpack
        object_header              = objhead
        contents_bin               = objbin
        contents_txt               = objtxt
        receivers                  = reclist
      EXCEPTIONS
        too_many_receivers         = 1
        document_not_sent          = 2
        operation_no_authorization = 4
        OTHERS                     = 99.
    CLEAR : it_email.
ENDLOOP.
ENDFORM.                    "send_mail
Message was edited by:
        Sugumar Ganesan

How to send ASCII character to the read buffer?

how to send ASCII character to the read buffer?

I assume you mean the serial port read buffer. You can't the only way data gets there is by coming in on the receive line.
What exactly is it that you are trying to do?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

How plotting on a digital waveform graph the bit transition in function of the time

Hi everyone,
I am using LabView 6.1 on a Windows XP computer. I am to plot output bits sequences on a digital waveform graph just before sending the information to a board.
So far I can see the transitions for my 16-bit port (16 plots) but the width of a pulse is always identical, no matter what times I enter. I wired my 1-D array timestamps to the property node Xscale.MarkerVals[] of my digital waveform graph... but it doesn't seem to affect my plotting...
Thanks in advance for any help concerning this problem.
Jonathan Sabah

Well here is piece of my VI with the necessary sub VI.
I also want to hide/unhide plots... I have found how to hide.. but cannot figure out how to unhide.
Any help please ?
Thanks again
Jonathan
Attachments:
Exemple.vi ‏58 KB
Setup_DIO64_for_Output_1.0.vi ‏111 KB

How to send digital signature from pdf form to fdf file?

Hi...
I already create the pdf form that contain digital signature field using ACROBAT XPRO...and now i would like to send data from pdf form to fdf file.I already manage to send data from other field except the digital signature.How to send the signature digital value to FDF file so that i can display it back to PDF file next time?Can anyone help me...i really need help right now...
tq..

hi....
thanks for replying..
George Johnson wrote:
It did work with earlier versions that did not perform a full save when a signature was applied. Since Acrobat/Reader now do a Save As when a signature is applied, there are no incremental saves to include in the FDF. This can still be useful for forms that haven't been signed, oddly enough, but since you cannot control whether the user performs a full save, it shouldn't be relied on for general use. The big problem is extracting the appended saves from the FDF so you can concatenate it to original document. The FDF Toolkit is the only thing I'm aware of that helps with this.
as u said that,Fdf tool kits can help to solve my problem.Can u send me the sample of code using java so that i can get the value using Fdf Tool kits?
Thanks..

How to split digital waveform channels?

Hi , could you please let me know how can I split the digital channels of a digital waveform(Let's say the digital waveform has 6 channels ) and graph them seperately.
It is very easy to split analog waveform signals ( acquired using N channel N sample) but I don't know how to do it for digital waveforms.

tintin_99 wrote:
Let's say I have acquired the digital signal at 1MS/s / Now I want to decimate the number of samples to 1kS/s. Again I know how to do it for analog signal using the decimate function. Do you know a way to do it on a digital signal?
Decimation make sense only to ANALOG signals, as ANALOG signal are continuous and can have any value (within defined range) on the other hand, DIGITAL signals can have just two states (0 or 1), so when you talk about decimating a DIGITAL signal, you need to come up with an algorithm, how you want to knock off the sample data points (say every alternate sample)....!!
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.

How to pass digital waveform to a raised cosine filter

so i have a digital waveform like this for example
and i want to pass it through a raised cosine filter (which i can generate its coeeficents by having the digital design toolkit)
below is the shape of the VI (it only outputs
and after passing the digital through the filter i want the analog signal to look like this
So my question is how can i pass the digital signal through that raised cosine VI ??

Coninued from here http://forums.ni.com/t5/LabVIEW/Please-any-help-would-be-appreciated-how-can-i-implement-a/m-p/30998...

How to get Digital waveform with Time.

Hi
I have 3 channels , each of which have ON/ OFF cycles specified with milliseconds as shown below.
Channel 1       OFF(3000) ON(2000) OFF(1000) ON(500) OFF(4000) ON(300)
                     The number in the bracket is the time in milliseconds for which the channel has to be ON or OFF.
Channel 2      OFF(800) ON(1000) OFF(6000) ON(2000) OFF(5000) ON(400)
Channel 3       OFF(1000) ON(700) OFF(500) ON(800) OFF(400) ON(600)
So i need a digital waveform plot with Y axis showing the highs and lows for the channel and X- Axis showing the time in milliseconds.
All the channels can be plotted in one graph or separate graphs.
I tried plotting with each OFF as False and ON as TRUE and built a boolean array. then converted to digital. but was not able to get the time (X-axis ) correctly. Is there any way to get Time on X axis for the Digital channel.
Thank you .Regards. Hema.

Hi Dennis,
I have done the same way as you suggested.but the sample rate is common to all the channels.( that is each channel is one boolean array column in the 2D boolean array which is fed to the Digital function , but i need separate sample rate for each channel(1-D array).
The Boolean array to digital takes 2D array as input, so i was not able to get different Time on X-axis.
But i found out a solution( very long method) by building time array separately and plotting the waveform without using sample rate.
Now i want to get rid of the '1' and '0' which gets displayed on the digital waveform by default . That is for every high there is number 1 shown and every low number 0 is shown on the graph. Please can I know how to remove this number display.
I saw digital waveform example too, but on all digital waveform, the numbers are shown. Is there any property to be set to disable 1 and zero display.
Thank you.

How to send as an email the spool request?

Dear Experts,
My last post was Email background schedule report to gmail or yahoo mail .
I got solution but it's work as a notification which we can say the after report run it triggers mail that report is completed as this time.
But i required the thing how to send a spool request of a report as an email attachment.
it will be in .xls or .pdf or xyz format.
It was the additional task which was required by my organization.
I also want to know the following things.
1. what is sap default configuration and system behind it.
2. what the things abaper have to check.
3. what is bcs_examples & where do i found these bcs_example8.
Please guide me to explore my knowledge.
Thanks & regards
Nayan Lad
Note for moderator : Sir, I will close request at 2:30 pm today onward, so please do not lock it.
Moderator Message: All your questions can be answered by searching.
Edited by: kishan P on Nov 13, 2010 3:29 PM

need solution..

How to send a Notification in the Background????

Hi Experts,
I am working on a process consisting of 2 activities :-
    - Creation of a Proposal by the Employee
    - Evaluation & Approval of Proposal by the Manager
I have these 2 doubts :-
    - I need to send a notification to the manager on creation of a proposal. How do i go about it???
    - Also i need to send a notification to the user regarding the approval or rejection of the proposal.
Should i create a Callable Object in GP and add that in the Action Create Proposal???
please guide me regarding the same.
Thanks a lot.
Cheers
Gaurav Raghav

Hi again
Usually it takes a while till the Adobe designer loads, but if the window remains blank... hmmm than I guess it should be some error in Adobe Document Services configuration...
So I guess you know this, but just in case here are installations you need to use for Adobe Document Services and composite forms in Web Dynpro Applications:
·        A local installation of Adobe LiveCycle Designer 7.1.
You can download Adobe LiveCycle Designer 7.1 from SAP Service Marketplace at: service.sap.com/installations - Search for Installations and Upgrades (from the left-hand side navigation) and then for material number 50083078_1. To install the Adobe LiveCycle Designer, use the file SapAldSetup.exe from the downloaded archive 50083078_1.ZIP.
·        A local installation of Adobe Reader 7.0 or higher or a full version of Adobe Acrobat 7.0.
You can download Adobe Reader for free from the Adobe web site.
Depending on your requirements, you may also need to configure specific composite form properties.
Apart from that, if you have a ready composite form created previously, you can upload it by checking the Field-Based Template checkbox in the beginning of the wizard for creating composite form.Thus, the wizard does not make you create a new one from scratch, but rather upload your own.
Hope that was helpful
Greets,
Petra

How to send a mail to the user when a job gets canceled?

Hi experts,
                  I need to send a mail when a job gets canceled to the user.I know the FM for sending mail and i can find if a job is canceled from tbtco,but i want to know how to send the mail from the same program ,once it got canceled ?
thanks in advance,
helpful answers will be awarded with points
regards,
ashwin

Hi Ashwin
Use the below peace of code:
REPORT ZBCJOBMONITOR .
TABLES: SOMLREC90,
        TBTCO.
DATA: MAILDATA   LIKE SODOCCHGI1.
DATA: MAILTXT    LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: MAILREC    LIKE SOMLREC90 OCCURS 0 WITH HEADER LINE.
DATA: I_TBTCO    LIKE TBTCO OCCURS 0 WITH HEADER LINE.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001 .
SELECT-OPTIONS: S_JOB FOR TBTCO-JOBNAME.
SELECT-OPTIONS: S_JOBC FOR TBTCO-JOBClass.
SELECT-OPTIONS: S_REC FOR SOMLREC90-RECEIVER.
SELECTION-SCREEN END OF BLOCK B1.
START-OF-SELECTION.
CLEAR:    MAILDATA, MAILTXT, MAILREC, I_TBTCO.
REFRESH: MAILTXT, MAILREC, I_TBTCO.
PERFORM GET_ABENDED_JOBS.
PERFORM BUILD_RECEIVERS.
LOOP AT I_TBTCO.
    PERFORM BUILD_TEXT_MESSAGE.
    PERFORM SEND_MAIL_NODIALOG..
ENDLOOP.
     Form BUILD_TEXT_MESSAGE
FORM GET_ABENDED_JOBS.
SELECT * FROM TBTCO
          INTO CORRESPONDING FIELDS OF TABLE I_TBTCO
                     WHERE JOBNAME IN S_JOB
                       AND STATUS = 'A'
                       AND JOBCLASS IN S_JOBC
                       AND SDLSTRTDT = SY-DATUM.
ENDFORM.
     Form BUILD_TEXT_MESSAGE
FORM BUILD_TEXT_MESSAGE.
DATA: DATE(10) TYPE C.
DATA: TIME(10) TYPE C.
MAILDATA-OBJ_NAME = 'MONITOR'.
MAILDATA-OBJ_DESCR = 'Batch Job Monitor'.
MAILDATA-OBJ_LANGU = SY-LANGU.
CONCATENATE 'Job Name:' I_TBTCO-JOBNAME
              INTO MAILTXT-LINE SEPARATED BY SPACE.
APPEND MAILTXT.
PERFORM FORMAT_DATE USING I_TBTCO-SDLSTRTDT
                            DATE.
CONCATENATE I_TBTCO-SDLSTRTTM+0(2) ':'
              I_TBTCO-SDLSTRTTM+2(2) ':'
              I_TBTCO-SDLSTRTTM+4(2)
                 INTO TIME.
CONCATENATE 'Start Date/Time:' DATE TIME
            INTO MAILTXT-LINE SEPARATED BY SPACE.
APPEND MAILTXT.
CONCATENATE 'Job Class:' I_TBTCO-JOBCLASS
            INTO MAILTXT-LINE SEPARATED BY SPACE.
APPEND MAILTXT.
MAILTXT-LINE = 'Job has terminated abnormally'.
APPEND MAILTXT.
ENDFORM.
     Form BUILD_RECEIVERS
FORM BUILD_RECEIVERS.
LOOP AT S_REC.
    CLEAR MAILREC.
    MAILREC-RECEIVER = S_REC-LOW.
    MAILREC-REC_TYPE = 'U'.
    APPEND MAILREC.
ENDLOOP.
ENDFORM.
     Form SEND_MAIL_NODIALOG
FORM SEND_MAIL_NODIALOG.
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
       EXPORTING
            DOCUMENT_DATA              = MAILDATA
            DOCUMENT_TYPE              = 'RAW'
            PUT_IN_OUTBOX              = 'X'
       TABLES
            OBJECT_HEADER              = MAILTXT
            OBJECT_CONTENT             = MAILTXT
            RECEIVERS                  = MAILREC
       EXCEPTIONS
            TOO_MANY_RECEIVERS         = 1
            DOCUMENT_NOT_SENT          = 2
            DOCUMENT_TYPE_NOT_EXIST    = 3
            OPERATION_NO_AUTHORIZATION = 4
            PARAMETER_ERROR            = 5
            X_ERROR                    = 6
            ENQUEUE_ERROR              = 7
            OTHERS                     = 8.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
     Form FORMAT_DATE
FORM FORMAT_DATE USING IN
                       OUT.
CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
       EXPORTING
            DATE_INTERNAL            = IN
       IMPORTING
            DATE_EXTERNAL            = OUT
       EXCEPTIONS
            DATE_INTERNAL_IS_INVALID = 1
            OTHERS                   = 2.
ENDFORM.
Regards,
Sree

How to send binary data in the message body

How can we send binary data in the message body that is base64 encoded? below are the requirements
Mime Header.
Mime-version: 1.0
Content-Type: application/octet_stream; name=test
Content-Transfer-Encoding: Base64
Submission must be named "test.sub" (lowercase)
Submission must be base64 mime-encoded
Submission must be sent in the body of the message (not as an attachment)
Only one submission per mail message
No other comments should be put in the body of the mail message (other than the submission)
I highly appreciate your help. If you can provide few examples, that will be very helpfull.
Thanks,
Madan

Use Message.setContent to set the content, or use Message.setDataHandler with
a DataHandler constructed with a ByteArrayDataSource. If the content is not
"naturally" encoded in base64, you can enforce it by setting the Content-Transfer-Encoding
header to "base64". Any reasonable mail reader won't care what encoding you use, as
long as the decoded data is correct.

How to send a file top the default printer?

Hello,
I have generated, using Java code, a certain HTML file and wrote it to a certain location on my local machine. I would like now to automatically send this file for the default printer for printing, this way the user won't have to manually open the file and select
file->print from the browser window and then print it.
How can I acomplish this?

hi
good
how can you identify which file you r going to print and which file you r going to print.if you r going to print all the file from that particular location than you can do it through jsp, but i dont think it can be done automatically, the user has to select the particular location where you have stored the file in you hard disk and i will go for printing.
Thanks
mrutyun

How to send digital waveform to the DAC?

Similar Messages

Maybe you are looking for