How to send email to IONIX from MARS

Hello:
How can I send alerts to IONIX from MARS?
Example email address: ionix@ionix
Thanks in advance!

I am not really sure about IONIX or what it does. But if it's just an e-mail address, then you can create rules on the MARS to send e-mails for certain alerts or conditions. The MARS needs an SMTP server configured for this purpose.
http://www.cisco.com/en/US/docs/security/security_management/cs-mars/6.0/user/guide/combo/alerts.html#wp1060775
Regards,
Prapanch

Similar Messages

How can I email a photo from ipad2 via 3G? It just shows turning gear and says sending, but doesn't go. Also, am I not able to use face mail via 3G?

How can I email a photo from ipad2 via 3G? When try, only see spinning gear and it says sending, but it never goes. Also, can facetime be used via 3G?

Limnos wrote:
I know somebody with an iPhone and we were told Facetime requires a wi-fi network connection.
It is on the man. page 45
Limnos wrote:
FaceTime works only on WiFi.
Correct, as I earlier intimated. It is to stop you from burning through your 3G data limit.
It won't since it only works on Wifi.

How to send emails from HANA SQL Console

Hi,
Please guide how to send mail from HANA Studio SQL Console.
Is there any standard procedure in Hana Studio to send Mail( e.g. in MS SQL "sp_send_dbmail" Procedure)

Hi Preethi,
Please go through the attached link:
How to send emails from HANA
Regards,
Krishna

How to send emails from of pdf's generated by oracle reports

I have several pdf documents , I want to email those pdf's . Please let me know how to send emails from oracle reports .
Thanks,
Previn

I have integrated Oracle Reports with Oracle Portal and used the scheduling feature via portlets. We have reports that run every monday morning for management. For more info go to:
http://otn.oracle.com/products/reports/htdocs/getstart/demonstrations/index.html
OR
I think if you set destype=mail, desformat=PDF, and desname=[email protected] that should also do the trick.
Just be sure that you have put your mail server's IP address in the rep_<machine_name>.conf file located in your <oracle_home>/reports/conf directory. If this is not set up, the mail feature won't work.
Martin

How to sending email from Oracle Forms

How to sending email from Oracle 6i(Forms)
I need to send email to a distribution list(multiple email addresses).

send email of multiple email address
[email protected],[email protected],[email protected]
create or replace function mailout
(sender in varchar2,
recipient in varchar2,
ccrecipient in varchar2,
subject in varchar2,
message in varchar2) return number
is
crlf varchar2(2) := chr(13)||chr(10);
connection utl_smtp.connection;
mailhost varchar2(50) := 'Add email server Ip Address here';
header varchar2(4000);
v_num number :=1;
str number:=0;
email varchar2(50);
begin
connection := utl_smtp.open_connection(mailhost,25);
header := 'Date: '||to_char(sysdate,'dd mon yy hh24:mi:ss')||crlf||
'From: '||sender||' '||crlf||
'Subject: '||subject||crlf||
'To: '||recipient||crlf||
'Cc: '||ccrecipient||crlf||message;
utl_smtp.helo(connection,mailhost);
utl_smtp.mail(connection,sender);
utl_smtp.rcpt(connection,recipient);
while (instr(ccrecipient,',',1,v_num)>0) loop
email:=substr(ccrecipient,str+1,instr(ccrecipient,',',1,v_num)-str-1);
dbms_output.put_line(email);
utl_smtp.rcpt(connection,email);
str:=instr(ccrecipient,',',1,v_num);
v_num:=v_num+1;
end loop;
utl_smtp.open_data(connection);
-- utl_smtp.write_data(connection,header);
utl_smtp.write_data(connection,'MIME-Version:1.0'||crlf||'Content-type:text/html'||crlf||header);
utl_smtp.close_data(connection);
utl_smtp.quit(connection);
return 0;
exception
when utl_smtp.invalid_operation then
dbms_output.put_line('Invalid Operation in SMTP transaction');
return 1;
when utl_smtp.transient_error then
dbms_output.put_line('Temporary problem with sending email ');
return 2;
when utl_smtp.permanent_error then
dbms_output.put_line('Permanent problem with sending email ');
return 3;
end;

How to send emails to Multiple Users from a Single People Picker lookup field using Sharepoint designer workflow

Hi All,
I am working with SharePoint 2013 designer workflow. we are using office 365.
Our requirement to send email to multiple users, get the user groups from lookup list people and groups column.
But SP designer sending emails to the first user alone.
Please guide me to proceed.
Advance Thanks.
Regards
Jenkins NS
Thanks and Regards Jenkins

finally I got a solution
Identified a workaround to solve the issue using SharePoint designer.
Step 1
Create a lookup list Example department
Columns
Title (by default) – Single line of text
Users – Person or Group
Emails – Multiple lines of text
hidden the Emails column (go to content type and set the column as hidden)
Create a SharePoint designer Workflow
Start Workflow automatically when an item is created
Also Start Workflow automatically when an item is changed
Workflow Stage 1
Set Emails to current Item: Users
The workflow will get all users email ids and add in the Emails column delimiter as semicolon.
Step 2
Create a custom list to get the email ids and send email
Create a lookup column ex: analysis and refer department list, Allow multiple values
Then Create a SharePoint designer workflow
full details workflow steps please follow below
URL
http://jenkinsblogs.com/2015/04/30/how-to-send-emails-to-multiple-users-from-lookup-list-people-picker-field-using-sharepoint-designer-workflow/
Thanks and Regards Jenkins

[SOLVED]How to send email to a local user?

I have installed Mutt, msmtp, procmail and I can send and receive emails to/from remote hosts and I'd like to send email locally also (to the recipients on the same machine as the sender).
When I try to send email to a local user from the root account -
echo "Test message" | mail -s "Test subject" localuser
then I get an error that connection to the port 25 is refused. Because the /etc/msmtprc file contains the 'localhost' as the default account's host, and on the local host I don't have a mail server listening on 25 port running.
When I try to send email from a non-root account which has in /$HOME/.msmtprc file a real email account on a remote server, then of course there is an error that the domain for the email address 'localuser' is not recognized.
How can sending email to local users be enabled?
Last edited by nbd (2014-09-30 22:33:37)

If I understand correctly, postfix it's a constantly running daemon. Seems to be an overhead for delivering only from time to time sent messages.
ewaller wrote:
> Out of the box, sendmail should be safe, but I think you have to enable local mail.
Currently I have msmtp-mta installed, which is described as having sendmail functionality. If I install sendmail - will it be possible to send local email without running email daemons?

HT4979 why can I not send email when away from my home wifi? Am able to receive messages OK, and outgoing mailserver is correct?

Why am I unable to send email when away from my home wifi ? I am able to receive mail OK, and have double- checked the outgoing server which is correct. This problem is consistent with my Macbook Pro, iPhone, and iPad2.
Attempts to send messages results in them sitting in the Outbox and never- ending 'sending message' displayed.
I am able to send using my me.com server.
Home service provider is Cogeco.
Any help would be appreciated.

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try a Reset - iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
Or this - Delete the account in Mail and then set it up again.
 Cheers, Tom

How do I email a group from in my contacts?

How do I email a group from my contacts?

Work Around:
On your mac:
1. Open a new email
2. Insert name of an existing group into one of the "To" fields as usual.
3. Highlight all the resulting names in the "To" entry
     [Highlight first name, and while holding shift, highlight last name and all will highlight[]
4. Copy (Command C) the highlighted emails
5. Paste (Command V) nto a pages document
6. Remove the name and anything else preceeding the first < and also the first < of only the first entry whixh will look like this:
     [email protected]>,
7. Remove the > of the last email which will look like this:
     , Jane Doe <[email protected]
8. Copy the entire altered list from the pages document
9, Go to Contact Book and click + to add a new entry
10.. Name the entry (XXX Group for iPad) or whatever you wish to call it
11. Paste all the copied altered list into any one of the email entry spaces
12. Click on "Done"
13. Create new email On iPad and click on + in any one of the "To" lines and search for "XXX Group for iPad" You cannot just key in XXX Group for iPad!!!!!!!, you must use + contact search.
14. Enter the selected iPad contact group into the "To" line.
15. All the entries will now appear in the "To" line and you are good to go.
Adding or deleting email addresses from the iPad group:
Easiest: Alter the original mac group in the usual way and repeat steps 1-14 above. It seems impossible to edit within the emai line of the iPad contact entry.
Rediculously simple once figured out.
Happy emailling, but please send Bcc so that you don't spread your groups' email addresses all over the internet for spam, viruses, and other unwanted emails. Be considerate and ask your recipients to notifiy you if they wish to be deleted from the lists you compose.

Sending email to groups from iPad/iPhone

How do you send email to groups from an iPad or iPhone ?

Do all the contacts in the group have a valid email address? What does the server complain about exactly (without revealing the actual email addresses)?

How to send emails to spam folder?

I just got my Note4 and the phone's Help tells me that I need to select the email, then the bottom menu will populate with a little red circle with a + in it. I am to click that and the email address is sent to spam. But my bottom menu is NOT giving me that spam icon to click. How can I block emails? Or how can I get that little icon to show up?
Thanks!!

Yes, I have unsubscribed to the emails that allowed me too. Now I would
like to block spefic addresses and/or domains.
My email addresses are @verizon.net, @gmail.com and a corporate one. I am
using Gmail for the Gmail accounts and using the default email service that
came on the phone. It's icon is an envelope with a red @
I know the gmail service allows me to easily click "report spam" but using
note 4 how can I block emails in my verizon.net account and corporate
account?
Thanks.
<https://community.verizonwireless.com>
A message from the Verizon Wireless Community
<https://community.verizonwireless.com>
<https://www.verizonwireless.com/wcms/consumer/explore.html>
<http://www.verizonwireless.com/wcms/consumer/shop.html> [image: MY
VERIZON] <http://www.verizonwireless.com/b2c/myverizonlp/>
<http://www.verizonwireless.com/support/>
how to send emails to spam folder? created by Verizon Wireless Customer
Support <https://community.verizonwireless.com/people/vzw_customer_support>
in Android - View the full discussion
<https://community.verizonwireless.com/message/1176922#1176922>

How do I email video imported from camera?

How do I email video imported from digital camera? It is a short video not more than a couple minutes long. I am using a PowerBook G4.
Thanks for any help.

BGreg wrote:
Video's get big quickly, however, assuming it's not too big, just attach it to your email and send it along.
This isn't a reliable method because you just don't know what the limits are on both ends. It is much more reliable to use a free file transfer service like Dropbox, Box, Google Drive, Amazon Cloud Drive, YouTube, etc and just send an email link.
Eustace Mendis wrote:
You should compress the video file before transferring. Just click on the name video file and go to the File menu. Compress ... is there. The compressed file will have the same name as the original, with a .zip suffix.
That's not the way to compress a video file. Video files are already compressed using lossy codecs like H.264, and if you apply a lossless codec like ZIP you may end up with zero additional compression. In some cases, applying ZIP to a lossy compressed file may cause the file to become larger.
The correct way to compress a video is to export it from iMovie (or whatever) with the correct settings for the destination (email, YouTube, iPad, etc.).

How do I email a group from a list of email addresses in a pdf?

how do I email a group from a list of email addresses in a pdf?

Work Around:
On your mac:
1. Open a new email
2. Insert name of an existing group into one of the "To" fields as usual.
3. Highlight all the resulting names in the "To" entry
     [Highlight first name, and while holding shift, highlight last name and all will highlight[]
4. Copy (Command C) the highlighted emails
5. Paste (Command V) nto a pages document
6. Remove the name and anything else preceeding the first < and also the first < of only the first entry whixh will look like this:
     [email protected]>,
7. Remove the > of the last email which will look like this:
     , Jane Doe <[email protected]
8. Copy the entire altered list from the pages document
9, Go to Contact Book and click + to add a new entry
10.. Name the entry (XXX Group for iPad) or whatever you wish to call it
11. Paste all the copied altered list into any one of the email entry spaces
12. Click on "Done"
13. Create new email On iPad and click on + in any one of the "To" lines and search for "XXX Group for iPad" You cannot just key in XXX Group for iPad!!!!!!!, you must use + contact search.
14. Enter the selected iPad contact group into the "To" line.
15. All the entries will now appear in the "To" line and you are good to go.
Adding or deleting email addresses from the iPad group:
Easiest: Alter the original mac group in the usual way and repeat steps 1-14 above. It seems impossible to edit within the emai line of the iPad contact entry.
Rediculously simple once figured out.
Happy emailling, but please send Bcc so that you don't spread your groups' email addresses all over the internet for spam, viruses, and other unwanted emails. Be considerate and ask your recipients to notifiy you if they wish to be deleted from the lists you compose.

How to send email notification in different languages in Workflow ?? Urgent Help Needed

Gurus,
How to send email notification in different languages in Workflow? Can anyone send me some useful guidelines or link where it is mentioned.

There is no profile option available to specify whether send or not send email notification.
But after login, in preferences youcan set the notification preference value by which you can configure whether to send or not
to send email notifications.
If you select ''Do not send me mail' or 'Disabled' it will not send.
For other values it sends the notfication in different formats like text, html, attachments etc...
Edited by: sarojak on Jun 27, 2011 7:18 AM

How to send Itune gift card from UK to Malaysia?

How to send Itune gift card from UK to Malaysia? Would like to send it as a gift to my Malaysia friend, However, store officials said that itune card bought in UK are only for UK account. Is that true?

They're correct. If desired, send the money with an international cheque instead of through iTunes.
(126705)

How to send email to IONIX from MARS

Similar Messages

Maybe you are looking for