How to send Emails to Other Domain for the users in My AD

Hi All,
I have a Domain test.com and in this i created 10 users and now i in the properties of their account i added mail address as ****.dummy.com (which is not my domain which i have created separately and there is no relation between these two) No will the mails
will be deliverd to those users??
Thanks

Is this "other domain" you are talking about just an SMTP domain, or a Windows domain? If the former, and there is a messaging system they can receive with, you can just send (though you may need a send connector). If the latter,
is it in the same Windows forest? If so, you need to prepare the domain for Exchange (using Setup /PrepareDomain). You can then add that domain to your Accepted Domain list (in the Organization configuration, Hub Transport role) and create
mailboxes for these users. Once the have mailboxes, they will receive email. Until all of this happens, they won't be able to get mail.

Similar Messages

Problem in sending email to other domain users

Hi All,
I am using javamail for sending emails and able to send to people within my exchange server domain. The problem is i am unable to send mail to other domain users like yahoo.com, hotmail.com..the error it is throwing out is *"Invalid Address"*
Is there any spaecial API for this to work?
Thanks,
Kishore

More details, please.
Please read the JavaMail FAQ. Post the protocol trace if you can't figure it
out yourself.

Exchange 2013 Create an smtp relay to allow sending emails to other domains from web application

Hello,
We have an exchange 2013 and we want to allow a web application that is outside the organisation to send emails through our sever to external domain.
Do we have to create an smtp receive or sending connector? How this on has to be configured ?
Thank you in advance.
m

Hello Mehdi,
be sure that you enable exchange servers permission and externally secured authentication after you create the receive connector.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. My blog:http://msibrahim.wordpress.com/

How to send email using pl/sql containing the result set as the msg body

Hi.. im using Pl/SQL code to send emails to the users from a dataset that is obtained in a databse table. i have used utl_smtp commands to establish the connection with the smtp mail server. im stuck at the logic when i have to include the message body which is actually the result set of a table.. For instance
IF (p_message = 0) THEN
UTL_SMTP.write_data(l_mail_conn, 'There is no mismatch between the codes' || UTL_TCP.crlf);
ELSE
UTL_SMTP.write_data(l_mail_conn, 'The missing codes are ' || UTL_TCP.crlf);
for s in (select * from temp)
loop
UTL_SMTP.write_data(l_mail_conn, ' ' ||s || UTL_TCP.crlf);
end loop;
END IF;
UTL_SMTP.close_data(l_mail_conn);
UTL_SMTP.quit(l_mail_conn);
END;
***p_message is a prameter passed to this procedure..
Can i obtain the result in the form i have it in my table. which has three columns. I want to display the three columns as it is with teh records. ?

this is not related about this forum but you can use below,
CREATE OR REPLACE PROCEDURE SEND_MAIL (subject varchar2,mail_from varchar2, mail_to varchar2,mail_msg varchar2)
IS
mail_host varchar2(30):='XXXXX';
mail_conn utl_smtp.connection;
tz_offset number:=0;
str varchar2(32000);
BEGIN
begin
select to_number(replace(dbtimezone,':00'))/24 into tz_offset from dual;
exception
when others then
null;
end;
mail_conn:=utl_smtp.open_connection(mail_host, 25);
utl_smtp.helo(mail_conn,mail_host);
utl_smtp.mail(mail_conn,'[email protected]');
utl_smtp.rcpt(mail_conn,mail_to);
utl_smtp.open_data(mail_conn);
utl_smtp.write_data(mail_conn,'Date: '||to_char(sysdate-tz_offset,'dd mon yy hh24:mi:ss')||utl_tcp.crlf);
utl_smtp.write_data(mail_conn,'From: '|| mail_from ||utl_tcp.crlf);
utl_smtp.write_data(mail_conn,'To: "'|| mail_to ||'" <'||mail_to||'>'||utl_tcp.crlf);
utl_smtp.write_data(mail_conn,'Subject: '||subject||utl_tcp.crlf);
utl_smtp.write_data(mail_conn,utl_tcp.crlf);
utl_smtp.write_data(mail_conn,replace_turkish_chars(mail_msg)||utl_tcp.crlf);
utl_smtp.write_data(mail_conn,utl_tcp.crlf);
utl_smtp.close_data(mail_conn);
utl_smtp.quit(mail_conn);
END;
Edited by: odilibrary.com on Jun 12, 2012 5:26 PM

How to adjust mouse or trackpad parameters for the user selection screen?

This is not critical, but annoying. I can change the mouse or trackpad parameters by user, so anyone can use their own mouse or trackpad adjustment. However I can not locate how to change this parameters for the welcome or user selection screen. In my case I have two users, both of us use the trackpad with the one touch for click function, so no one press physically the trackpad for a click. However, as the default parameter is the touch function deactivated we have to actually click the trackpad in that exclusive screen.
Another example with mouse, normally we use the mouse with almost double of the default acceleration, but when in the user selection screen the mouse assumes default configuration and feels super SLOWWWWWWW.
Again, this is not critical, but would be very nice to be able to modify this parameters in the welcome screen.
Tyrone Carrion

For the login screen, you are not associated with a normal user, but the system defaults...try logging in to the Admn account and change the behavior there...those settings should then apply to the login screen.

How to Send Emails to multiple persons for message notification

Hi ,
I have a ORG unit & a Postion defined under it . users have been defined under the postion also. However when a message under the respective ORG unit , the mail goes to 1 person who has been marked with a BP ( BP of orgunit) as mentioned in the Email field of the orgunit . How do we have different persons notified as mentioned under the Postion field ??
Regards
Kumar

Dear Fr,
You need to define a group mail and assign this in this Business partner.
For e.g in the ticket you have a field Developer and there are several Developer
Then in this case create a Group mail for all the developers
Assign this to a BP common say DEV and enter the earlier created Group mail in this BP.
So whenver you have assign the ticket to DEV the group of developer wil get mail.
PLEASE REWARD POINTS.

How to send mail to other domains

can any one help me?
My requirement is i have to send mails daily to our customers according to the customers search results.
our customers is having different mail ids(hotmail,rediffmail,yahoo,satyam,infosys...so on)
I want to send the results according to the mail id they specified. I able to send mails with in our mail server(mail.kaakateeya.com). Please help me regarding this.

Check with your system admin. Your e-mail server is probably setup to not allow mail relay.

HT4864 I can't receive or send email on any device for the last 24 hours

No email on any device since 10am EDT 9/11

Thank you for answering so promptly.
Yes, it is on the same network, but I just restarted the hub and it seems that I may have solved the problem. At least they appear to be working at the moment. Hopefully it will be permanent. Somehow there seemed to be a problem with just those two things and the connection to the hub, even though my iMac, iPad and iPhone worked fine. Strange things happen at times.
Thanks again, but It seems the problem is now solved

How can i validate on ALV grid for the user

Dear Freinds,
I have developed one custom report using ALV Grid program , as per the requirement i have to enter on the
data and when i press the value save the program sumits the data into my custom table . Till here every thing is fine
but one particular field i have declared as Char1 in my internal table , on the ALV output it is allowing me to enter
more than one character eg : it is allowing me to enter as Hyderabad .........even though i have declared as char 1 in the internal table ....however it is saving in the database table as H only that is correct.......but it is giving confusion to user
i want to validate that user shouldnt allow to enter more than one character in the alv output of the input field .
Please could any one let me know how can i validate.
regard
divya

Hi,
check that field length in the final internal table .
might be that filed lenth in final internal table declartion is more than 1 char.
regards,
Rama reddy
Edited by: ram reddy on Jul 15, 2009 7:57 AM

How to set required number of days for the user passwords to expire

How do I set the duration when users are required to change their passwords? This is an internal control measure to ensure control over users' logins.
Thanks a lot.

You can also set the lifetime of a single password dependent on it's "idle" status:
- Initial password at user creation. (e.g. 5 days)
- Reset password by admin. (e.g. 1 day)
- Productive password not used (e.g 91 days)
.. and the minimum validity of the password, regardless of how often it is used (not idle).
- Productive password expiration time. (e.g. 90 days)
You can also manually observe what is going on via report/transaction RSUSR200.
If you take a look at the documentation on the parameters in the link already provided, you will see the logic and the dependencies between them. The selection fields of RSUSR200 reflect the same.
How you rate the risk of passwords and these settings, also depends on many other things - most notably how disciplinced admins are at using the password wizard (in my opinion).
Cheers,
Julius

[SOLVED]How to send email to a local user?

I have installed Mutt, msmtp, procmail and I can send and receive emails to/from remote hosts and I'd like to send email locally also (to the recipients on the same machine as the sender).
When I try to send email to a local user from the root account -
echo "Test message" | mail -s "Test subject" localuser
then I get an error that connection to the port 25 is refused. Because the /etc/msmtprc file contains the 'localhost' as the default account's host, and on the local host I don't have a mail server listening on 25 port running.
When I try to send email from a non-root account which has in /$HOME/.msmtprc file a real email account on a remote server, then of course there is an error that the domain for the email address 'localuser' is not recognized.
How can sending email to local users be enabled?
Last edited by nbd (2014-09-30 22:33:37)

If I understand correctly, postfix it's a constantly running daemon. Seems to be an overhead for delivering only from time to time sent messages.
ewaller wrote:
> Out of the box, sendmail should be safe, but I think you have to enable local mail.
Currently I have msmtp-mta installed, which is described as having sendmail functionality. If I install sendmail - will it be possible to send local email without running email daemons?

How to send emails to spam folder?

I just got my Note4 and the phone's Help tells me that I need to select the email, then the bottom menu will populate with a little red circle with a + in it. I am to click that and the email address is sent to spam. But my bottom menu is NOT giving me that spam icon to click. How can I block emails? Or how can I get that little icon to show up?
Thanks!!

Yes, I have unsubscribed to the emails that allowed me too. Now I would
like to block spefic addresses and/or domains.
My email addresses are @verizon.net, @gmail.com and a corporate one. I am
using Gmail for the Gmail accounts and using the default email service that
came on the phone. It's icon is an envelope with a red @
I know the gmail service allows me to easily click "report spam" but using
note 4 how can I block emails in my verizon.net account and corporate
account?
Thanks.
<https://community.verizonwireless.com>
A message from the Verizon Wireless Community
<https://community.verizonwireless.com>
<https://www.verizonwireless.com/wcms/consumer/explore.html>
<http://www.verizonwireless.com/wcms/consumer/shop.html> [image: MY
VERIZON] <http://www.verizonwireless.com/b2c/myverizonlp/>
<http://www.verizonwireless.com/support/>
how to send emails to spam folder? created by Verizon Wireless Customer
Support <https://community.verizonwireless.com/people/vzw_customer_support>
in Android - View the full discussion
<https://community.verizonwireless.com/message/1176922#1176922>

Send email to different domain using different address

hi
I want to set my exchange recipients have 2 email address.
1=[email protected] 2=[email protected]
1.how can I set this setting? (I know I can use something called policy but I don't know how can use that for exchange 2013; please tell me how can do this)
2.how can set my exchange server to send email to different domain with different account? (after question 1; my recipients has 2 email address (***@domain.com,
***@domain.co) I want my recipients when send email to "company.com" using domain.com address and for other domains using domain.co)
thanks

1. Add an accepted domain. Add the e-mail address to your e-mail address policy. Update the e-mail address policy.
2. http://www.ivasoft.biz/choosefrom2007.shtml This has been the traditional answer for Exchange 2010 and earlier. You might contact him to see if it works for Exchange 2013.
I don't know of a native way to do this except to create separate mailboxes for each address.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Apex 4: How to send email when form is submitted?

Hi,
Using Apex 4.0.2 on DB 11g, I've a form with around 80 fields and 4 check boxes.
When the user clicks on submit button, besides saving the values in the database I also have to send emails. Selection of the 4 check boxes decides whom the email has to go to, i.e if 2 check boxes are checked, send 2 emails.
In the emails, some contents will be based on the data the user has filled and some from the database; also data in different emails will be different.
From what I've read, to send email I've to use APEX_MAIL API and make a conditional process depending on the check boxes selected. Also that I have configure mail server in database and that mail sever has to accept autonomous user (i.e. sending email without password)
Is this the right approach?
How can I do this?
Is there any example/tutorial that will guide me in doing this?
Thank you for your time.

The Apex email package is very simple.
v_id := apex_mail.send(
          p_to        => v_to,
          p_from      => v_from,
          p_subj      => v_subject,
          p_body      => v_body,
          p_body_html => v_html);It's up to you how you get the values of the variables.
Also that I have configure mail server in database and that mail sever has to accept autonomous userThe mail server is not in the database, but you do have to inform Apex which server to use (smtp.yourcompany.com).
Most smtp servers require user and password. In that case you have to write your own procedure. Search the pl/sql forum for email authentication and you will find many examples.
It is probably also possible to configure the smtp server in such a way that requests coming from the database do not need authentication. That is how we have it configured (but I don't know how the administrator did it, though).

How to send email notification in different languages in Workflow ?? Urgent Help Needed

Gurus,
How to send email notification in different languages in Workflow? Can anyone send me some useful guidelines or link where it is mentioned.

There is no profile option available to specify whether send or not send email notification.
But after login, in preferences youcan set the notification preference value by which you can configure whether to send or not
to send email notifications.
If you select ''Do not send me mail' or 'Disabled' it will not send.
For other values it sends the notfication in different formats like text, html, attachments etc...
Edited by: sarojak on Jun 27, 2011 7:18 AM

How to send Emails to Other Domain for the users in My AD

Similar Messages

Maybe you are looking for