How to send invoice to external email

Hi All,
Can anyone help me with the detail steps to configure settings so i can send invoice to the customer in their mail id.
Message was edited by: Monosij Bagchi

Hai Monosij Bagchi
Go through the following Link
http://www.sapgenie.com/its/email.htm
Thanks & Regards
Sreenivasulu P

Similar Messages

How to send mails to External Email-ID.

I have simple Workflow which I have Created to Just Send Mail to SAP-B WorkSpace on execution of the WF.
Can Anyone tell me how to Many populate the Workflow to Send this mail to External Email-ID.
Regards,
Shashank

Hello,
In the sendmail step of the workflow, use the option of email address for 'Recipient type' and provide the workflow container element which has the external mail address of the user to whom the mail is to be sent or directly the email address directly. Then contact the basis people to check for any scheduled background job to send the mail from SAP to external mail address. If there is no job present, advise them to create one.
Hope this will help.
Regards,
Samson

How to send mail to external email within workflow

Hi Expert,
I know this question has been questioned before in the forum but that is quite different from what i want. After researching in this forum i found out that forwarding was the way to move the inbox into the external mail (using scheduled job) but what i want is to include send mail activity within the workflow that directly send email into the external email ( so no scheduled job). The logic is perhaps:
1. get the email address
2. use send mail activity
3. Assign the element defined to E-Mail Address.
4. send the email.
But I'm unable to retrieve the email address, store it and pass it into the email (as element). Can somebody help me with this?
Many Thanks.

Use the below code(rule(fm)), hope it works for you.
I have placed the SAP user id's in custom table & inserted e-mailid's to them in su01.
FUNCTION ZMANI_GET_PLANNER.
*"*"Local Interface:
*" TABLES
*"      AC_CONTAINER STRUCTURE SWCONT OPTIONAL
*"      ACTOR_TAB STRUCTURE SWHACTOR
*" EXCEPTIONS
*"      NOBODY_FOUND
INCLUDE <cntn01>.
TYPES : BEGIN OF ty_users.
          INCLUDE STRUCTURE ZMANI_AGENT_MAST.
TYPES : END OF ty_users.
DATA: org_agent LIKE wfsyst-agent,
        lt_holders TYPE STANDARD TABLE OF swhactor,
        lwa_holders TYPE swhactor,
*        lt_users TYPE STANDARD TABLE OF ty_users,
        lwa_users TYPE ty_users,
        v_len TYPE i,
*        v_bname LIKE ztest_users-bname,
        num_lines TYPE i.
** Read values assigned to the rule criteria
swc_get_element ac_container 'org_agent' org_agent.
* Get the superior
SELECT SINGLE *
    FROM ZMANI_AGENT_MAST
    INTO CORRESPONDING FIELDS OF lwa_users
   WHERE MMC = 'Y'.
IF NOT lwa_users IS INITIAL.
    REFRESH lt_holders[].
    lwa_holders-otype = 'US'.
    lwa_holders-objid = lwa_users-BNAME.
    APPEND lwa_holders TO lt_holders.
    APPEND LINES OF lt_holders TO actor_tab.
ENDIF.
DESCRIBE TABLE actor_tab LINES num_lines.
IF num_lines IS INITIAL.
    RAISE nobody_found.
ENDIF.
ENDFUNCTION.

How to send sapmails to external mail systems

Hi,
how to send sapmails to external mail systems....
like if we want to mail a purchase order from SAP System to *@yahaoo.com or @.com.
TY.

hi manish,
u can do it.
chk this .
chk this code
DATA: objpack LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
DATA: objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
DATA: objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: reclist LIKE somlreci1 OCCURS 5 WITH HEADER LINE.
DATA: doc_chng LIKE sodocchgi1.
*& Form f_send_mail
text
--> p1 text
<-- p2 text
FORM f_send_mail .
*store the vendor name, vendor email id , employee name and employee
*email id in the internal table int_crb
Creation of the document to be sent
CLEAR doc_chng.
REFRESH objpack.
REFRESH objhead.
REFRESH reclist.
REFRESH objtxt.
File Name
doc_chng-obj_name = 'SHIPMENT'.
Mail Subject
CONCATENATE 'Shipment Document No.' int_crb_mail-shipdocnum
'Cleared.'
INTO doc_chng-obj_descr SEPARATED BY ' '.
Mail Contents
objtxt-line = 'Hi,'.
APPEND objtxt.
objtxt-line = ' '.
APPEND objtxt.
CONCATENATE 'Shipment Document Number ' int_crb_mail-shipdocnum
' cleared for move.' INTO objtxt-line SEPARATED BY ' '.
APPEND objtxt.
objtxt-line = ' '.
APPEND objtxt.
CLEAR objtxt.
objtxt-line = 'Regards '.
APPEND objtxt.
objtxt-line = ' '.
APPEND objtxt.
objtxt-line = 'SAP '.
APPEND objtxt.
CLEAR objtxt.
APPEND objtxt.
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
doc_chng-doc_size = ( tab_lines - 1 ) * 255 + STRLEN(
objtxt ).
Creation of the entry for the compressed document
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'RAW'.
APPEND objpack.
Completing the recipient list
target recipent
CLEAR reclist.
reclist-receiver = int_crb_mail-empperid. "employee email ID
"wf_empperid.
reclist-express = 'X'.
reclist-rec_type = 'U'.
APPEND reclist.
copy recipents
CLEAR reclist.
reclist-receiver = int_crb_mail-smtp_addr."vendor email id
reclist-express = 'X'.
reclist-rec_type = 'U'.
reclist-copy = 'X'.
APPEND reclist.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = doc_chng
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
OTHERS = 99.
COMMIT WORK.
SUBMIT rsconn01
WITH mode = 'INT'
WITH output = ' '
AND RETURN.
ENDFORM. " f_send_mail
for any clarifiaction pls mail me.
pls reward points, if this helped u.
regards,
anversha.
[email protected]

Send Alerts to external email ids

Dear All,
I am using ALERT MANAGEMENT to raise alerts and send mail to recipients. I am able to send external mails to
those users who have got a SAP Userid where the email id is maintained in the user profile. But suppose I want
to send mails to external users who do not have SAP Userid, then how to do it. I checked the program
RSALERTTEST where it gives the option to send mails to external email ids.
Regards,
Pravat.

Hi Pravat,
You can do this with SALRT_CREATE_API. But you have to create a alert category. go to ALRTCATDEF with a user role " SAP_XI_ADMINISTRATOR".
Then create category and give your receivers.
Then write a program like rsalrtdemo1 . This shows you how an alert can be called directly by a function module.
Also you can get more detailed information from these links :
Creating Alert Categories : http://help.sap.com/saphelp_nw70/helpdata/en/d0/d4b54020c6792ae10000000a155106/frameset.htm
Triggering Alerts : http://help.sap.com/saphelp_nw04s/helpdata/en/d0/5e073c8e56f658e10000000a114084/content.htm
I hope they help you.
Regards,
Orhan

How to send active links in email from firefox. Works in IE but not Firefox... Is there a setting to change?

how to send active links in email from firefox. Works in IE but not Firefox... Is there a setting to change?
== This happened ==
Every time Firefox opened
== Always

Check with your web mail service provider for help with that issue.

How to send a delayed notification email?

How to send a delayed notification email?
I have a requirement to send an email to the service requestor 2 days after the main fulfillment task is completed. I know I can create a task that auto-completes using the Dummy adapter, but is there a way to make it auto complete after a certain amount of time has elapsed? I was thinking about creating a second fulfillment task that would send this email upon completion, but I can't figure out how to delay its start or its end.

Hi Tylor,
James is onto a potential approach here. However, the only way I know of that could work is to use the Scheduled Start feature. This would require that you compute/project the start date of the auto-complete task before the delivery moment begins.
You would need to do a date calculation and then store the projected date in a hidden field. You could then have your auto-complete task fire on that computed date, using the Scheduled Start feature.
The wrinkle here, of course, is t

How to send active links in email from firefox

how to send active links in email from firefox. Works in IE but not Firefox... Is there a setting to change?
== Operating system ==
Windows 7

Check with your web mail service provider for help with that issue.

How to send puchase report in email ?

how to send puchase report in email ?

Search SCN, you will get lot of post for this.
Here is an example.
http://scn.sap.com/thread/321890

Not able to send workitem to external email id or Lotus notes.

Hi,
I am using standard program RSWUWFML2 to send workitem to external email id like lotus notes. When I execute this program i get the message "Work item xxxxxxxx sent to xxxxxxxxxxx".
As per the documentation of the program, program should process the workitem and send the same to external mail id. Please let me know if i miss something.
Below are the settings i did for program.RSWUWFML2
Job suffix 2
Tasks (blank = all) : task name of the workitem to send is entered. only one task is entered.
New Work item = X
One message per workitem = X
workflow entry = X
workitem = X
workitem execution = X
logs all =X
Edited by: Sunny80 on Dec 1, 2009 8:58 AM
Edited by: Sunny80 on Dec 1, 2009 9:01 AM

This is solved.

How to send .CSV file via email in Oracle10g/11g PL/SQL

Hi Guys,
Can any one let me know or suggest me how to send .csv file via email attachment using Oracle PL/SQL.
Thanks in advance!
Regards,
LRK

A FAQ. Use UTL_MAIL (if attachment is 32KB less). Else use UTL_SMTP. Search this forum. Search using google.

How to send invoice through email with output type RD00?

What are the configuration settings to send invoices through email with output type RD00?

Hi,
Please go through the following links:
[E-mail|Email Configuration Settings]
[e-mail|Re: EMAIL BILLING DOCUMENT TO CUSTOMER THROUGH SEND MAIL OPTION IN VF02]
After triggering the output,goto T.Code SOST and process it.
So that e-mail will be triggered immediately.
You can use External send/EDI/simple mail for this.
Regards,
Krishna.

How to forward Workflow to External Email

How to Forward Workflow to External Mail by right ckick and just to select forward, goes to external mail of its own Email-id which is defined in su01? Scot configuration is tested OK by sending new messages goes to any Email-id

Hi,
Can u clear u r qustion first...
U r forwarding some messages to external mail id ??
if u r doing means in mail step u need to mention external mail id...
tats it...
u nneed to check in SCOT tcode for status of this msg...
Regards,
Ragavendran.K

SharePoint Workflow doesn't send notifications to External Email address when Trusted Identity Provider enabled.

SharePoint Workflow send the notification to External email address fine but do not work when Trusted Identity Provider/SSO feature Checked. Please Advice!

Hi,
I am trying to involve someone familiar with this topic to further look at this issue.
Regards,
Rebecca
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Rebecca Tu
TechNet Community Support

How to send PDF attachment through Email For Purchase Order

Hi,
     Can you please tell me how to send the Purchase Order with PDF attachment. Thank you.
Thanks & Regards,
Rani.

Find the below example
*& Report ZSPOOLTOPDF                                                 *
*& Converts spool request into PDF document and emails it to           *
*& recipicant.                                                         *
*& Execution                                                           *
*& This program must be run as a background job in-order for the write *
*& commands to create a Spool request rather than be displayed on      *
*& screen                                                              *
REPORT zspooltopdf.
PARAMETER: p_email1 LIKE somlreci1-receiver
                                    DEFAULT '[email protected]',
           p_sender LIKE somlreci1-receiver
                                    DEFAULT '[email protected]',
           p_delspl AS CHECKBOX.
*DATA DECLARATION
DATA: gd_recsize TYPE i.
Spool IDs
TYPES: BEGIN OF t_tbtcp.
        INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
      wa_tbtcp TYPE t_tbtcp.
Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
      gd_eventparm LIKE tbtcm-eventparm,
      gd_external_program_active LIKE tbtcm-xpgactive,
      gd_jobcount LIKE tbtcm-jobcount,
      gd_jobname LIKE tbtcm-jobname,
      gd_stepcount LIKE tbtcm-stepcount,
      gd_error    TYPE sy-subrc,
      gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject   LIKE sodocchgi1-obj_descr,
      it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      gd_sender_type     LIKE soextreci1-adr_typ,
      gd_attachment_desc TYPE so_obj_nam,
      gd_attachment_name TYPE so_obj_des.
Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
      gd_destination LIKE rlgrap-filename,
      gd_bytecount LIKE tst01-dsize,
      gd_buffer TYPE string.
Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
        INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
           c_no(1)     TYPE c   VALUE ' ',
           c_device(4) TYPE c   VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
Write statement to represent report output. Spool request is created
if write statement is executed in background. This could also be an
ALV grid which would be converted to PDF without any extra effort
WRITE 'Hello World'.
new-page.
commit work.
new-page print off.
IF sy-batch EQ 'X'.
    PERFORM get_job_details.
    PERFORM obtain_spool_id.
Alternative way could be to submit another program and store spool
id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
       to sap-spool
       spool parameters   %_print
       archive parameters %_print
       without spool dynpro
       and return.
Get spool id from program called above
IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
    PERFORM convert_spool_to_pdf.
    PERFORM process_email.
    if p_delspl EQ 'X'.
      PERFORM delete_spool.
    endif.
    IF sy-sysid = c_dev.
      wait up to 5 seconds.
      SUBMIT rsconn01 WITH mode   = 'INT'
                      WITH output = 'X'
                      AND RETURN.
    ENDIF.
ELSE.
    SKIP.
    WRITE:/ 'Program must be executed in background in-order for spool',
            'request to be created.'.
ENDIF.
      FORM obtain_spool_id                                          *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
                 INTO TABLE it_tbtcp
                 WHERE      jobname     = gd_jobname
                 AND        jobcount    = gd_jobcount
                 AND        stepcount   = gd_stepcount
                 AND        listident   <> '0000000000'
                 ORDER BY   jobname
                            jobcount
                            stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
    message s004(zdd) with gd_spool_nr.
    gd_spool_nr = wa_tbtcp-listident.
    MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
    MESSAGE s005(zdd).
ENDIF.
ENDFORM.
      FORM get_job_details                                          *
FORM get_job_details.
Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
       IMPORTING
            eventid                 = gd_eventid
            eventparm               = gd_eventparm
            external_program_active = gd_external_program_active
            jobcount                = gd_jobcount
            jobname                 = gd_jobname
            stepcount               = gd_stepcount
       EXCEPTIONS
            no_runtime_info         = 1
            OTHERS                  = 2.
ENDFORM.
      FORM convert_spool_to_pdf                                     *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
       EXPORTING
            src_spoolid              = gd_spool_nr
            no_dialog                = c_no
            dst_device               = c_device
       IMPORTING
            pdf_bytecount            = gd_bytecount
       TABLES
            pdf                      = it_pdf_output
       EXCEPTIONS
            err_no_abap_spooljob     = 1
            err_no_spooljob          = 2
            err_no_permission        = 3
            err_conv_not_possible    = 4
            err_bad_destdevice       = 5
            user_cancelled           = 6
            err_spoolerror           = 7
            err_temseerror           = 8
            err_btcjob_open_failed   = 9
            err_btcjob_submit_failed = 10
            err_btcjob_close_failed = 11
            OTHERS                   = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
    TRANSLATE it_pdf_output USING ' ~'.
    CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
    it_mess_att = gd_buffer.
    APPEND it_mess_att.
    SHIFT gd_buffer LEFT BY 255 PLACES.
    IF gd_buffer IS INITIAL.
      EXIT.
    ENDIF.
ENDDO.
ENDFORM.
      FORM process_email                                            *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
perform send_email using p_email2.
ENDFORM.
      FORM send_email                                               *
--> p_email                                                       *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
Default subject matter
gd_subject         = 'Subject'.
gd_attachment_desc = 'Attachname'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod        = 'Message Body text, line 1'.
APPEND it_mess_bod.
it_mess_bod        = 'Message Body text, line 2...'.
APPEND it_mess_bod.
If no sender specified - default blank
IF p_sender EQ space.
    gd_sender_type = space.
ELSE.
    gd_sender_type = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
                               tables it_mess_bod
                                      it_mess_att
                                using p_email
                                      'Example .xls documnet attachment'
                                      'PDF'
                                      gd_attachment_name
                                      gd_attachment_desc
                                      p_sender
                                      gd_sender_type
                             changing gd_error
                                      gd_reciever.
ENDFORM.
      FORM delete_spool                                             *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
       EXPORTING
            spoolid = ld_spool_nr.
ENDFORM.
*&      Form SEND_FILE_AS_EMAIL_ATTACHMENT
      Send email
FORM send_file_as_email_attachment tables it_message
                                          it_attach
                                    using p_email
                                          p_mtitle
                                          p_format
                                          p_filename
                                          p_attdescription
                                          p_sender_address
                                          p_sender_addres_type
                                 changing p_error
                                          p_reciever.
DATA: ld_error    TYPE sy-subrc,
        ld_reciever TYPE sy-subrc,
        ld_mtitle LIKE sodocchgi1-obj_descr,
        ld_email LIKE somlreci1-receiver,
        ld_format TYPE so_obj_tp ,
        ld_attdescription TYPE so_obj_nam ,
        ld_attfilename TYPE so_obj_des ,
        ld_sender_address LIKE soextreci1-receiver,
        ld_sender_address_type LIKE soextreci1-adr_typ,
        ld_receiver LIKE sy-subrc.
data:   t_packing_list like sopcklsti1 occurs 0 with header line,
        t_contents like solisti1 occurs 0 with header line,
        t_receivers like somlreci1 occurs 0 with header line,
        t_attachment like solisti1 occurs 0 with header line,
        t_object_header like solisti1 occurs 0 with header line,
        w_cnt type i,
        w_sent_all(1) type c,
        w_doc_data like sodocchgi1.
ld_email   = p_email.
ld_mtitle = p_mtitle.
ld_format              = p_format.
ld_attdescription      = p_attdescription.
ld_attfilename         = p_filename.
ld_sender_address      = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
     ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name   = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num   = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type   = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name   = ld_attfilename.
t_packing_list-doc_size   = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
       EXPORTING
            document_data              = w_doc_data
            put_in_outbox              = 'X'
            sender_address             = ld_sender_address
            sender_address_type        = ld_sender_address_type
            commit_work                = 'X'
       IMPORTING
            sent_to_all                = w_sent_all
       TABLES
            packing_list               = t_packing_list
            contents_bin               = t_attachment
            contents_txt               = it_message
            receivers                  = t_receivers
       EXCEPTIONS
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            OTHERS                     = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
    ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
Reward if helpful.
Thanks,
Kishore S N

How to send invoice to external email

Similar Messages

Maybe you are looking for