How to send ipod in for replacement online

can you send me a new ipod touch and ill give you my old

Maybe here:
Apple - Support - iPod - Service FAQ
Why do you want ro do that?

Similar Messages

Sending iPod in for replacement but...

Hi there,
I just received my package to send in my iPod nano 1st gen in for replacement. Upon reading the instructions it says to fill out the waybill and to attach it onto the bottom of the box. My package didn't have a waybill included, just the instructions, foam and tape. Should I call apple and ask for a new box in regards of not having a waybill or should I not have to worry about it?

If the packaging already has a bar code on it you do not need to worry about filling out the waybill.

I sent my ipod nano for replacement but haven't had confirmation they have received it - how do i contact them?

Ten days ago i sent my ipod Nano for replacement (using the packaging Apple sent to me). Since then i have checked the progress online and all it shows is that they sent me the packaging, but not that they had received the ipod. I need to email or phone them, but can't seem to find either one. Is anyone able to help me?

You can track it on the carriers site - if you have a copy of the tracking label.
Depending on where it is going - if it is going by UPS - it may be held up due to Weather in Tennessee.
Anyway - the tracking will show when it was picked up, dropped off, and where it is sitting.

Hi how are you i want to replace my iphone 4 with a new one. But i am in Darwin,there is no any apple stores. So where can i send my phone for replacement and how much for that?

Hi how are you i want to replace my iphone 4 with a new one. But i am in Darwin,there is no any apple stores. So where can i send my phone for replacement and how much for that?

Warranty and Support are only valid in the country of origin. You will need to take the device to whatever country it originally came from.
Apple will not accept shipments from outside the country nor will they return it to an address outside the country.

How to send my ipad for technical assistance? He fell to the floor but still binds despite problems in the system

How to send my ipad for technical assistance? He fell to the floor but still binds despite problems in the system

Here you go: http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod
Good luck!

How to send trigger pulse for every 0.25 sec until user stops the task?

Hi All,
Iam using NI_DAQ PCI 6221 Card for the Data Acquisition.
Can any body please tell me how to send trigger pulse for every 0.25 sec until the user stop the task??
Please suggest me the methods I should use to meet this requirement.
Thanks In Advance,
Sindhu

Hi Sindhu,
Am I correct in thinking that you do not want to use your 6221 to output a digital pulse, but that you are getting a digital pulse from somewhere else that you want to use as a trigger for the analog input? And you will have more than one trigger? If this is the case, then it can be accomplished by doing a retriggerable operation. The way that this works is you use the counter on your board to generate the sample clock for your analog input because analog input cannot do retriggerable operations with its own sample clock. You can modify the example GenDigPulseTrainContinuous_DigStart that is in the same location as the example I referenced before to be retriggerable by using the property DAQmxSetStartTrigRetriggerable.
After doing that and testing to make sure that it works, you can setup an analog input task like the example ContAcqVoltageSamples_IntClk but specify the source of the sample clock to be the internal output of the counter you used in the counter portion of your program. If you need help with the terminal names (You will need to use Ctr0InternalOutput for example), you can reference the NI-DAQmx C Reference Help at Start >> Programs >> National Instruments >> NI-DAQ. After doing this, you will acquire the same number of samples as the number of pulses you choose to generate in the counter portion of your code every time a trigger is received.
Also, I have come across an example that does retriggerable analog input using the counter as a sample clock in C++. Either by using this example or modifying the shipping examples as I stated above you should be able to achieve what you are trying to do.
Let us know if you have any questions.
Thanks,
Laura

How much is the cost for replacing iphone 4 display?

how much is the cost for replacing iphone 4 display?

Apple will replace it, and the replacement comes with a 90-day warranty.
There are some legitimate, high quality repair centers that often can fix phones for less than replacement cost and offer at least 90 warranty...
Or maybe the OP knows that the broken display is not covered under warranty, which is why he was asking for the cost, but he still may have a warranty that just wouldn't cover him in this case.
The warranty is all or none. If the phone were damaged so as to void warranty coverage on the display, there is no remaining warranty on the rest of the device.

HT3302 How much will be charged for replacing a cracked screen for iPhone 5? How long it will take for repair?

Hi Folks,
I am a visitor and had my iPhone 5 cracked the front screen today, I just want to know how long it will take for repair if I send to Apple USA, and the charge for the replacement of the cracked screen.
Thanks for your advice in advance, I am currently in LA and will put into LA Apple Store asap.

Warranty and support are only valid in the country of origin.
If the device was not purchased in the US, an Apple store in the US will not touch it.

How to View Pending List for Replacement Subsequent Order

Hi Guru's,
Can any one tell me how we will able to findout the list of Pending order for Replacement.
If we will book a Return & do the delivery. After delivery we have Release the Sales Return order by VKM3. Then how we will found the list of released by VKM3 Sales Return Orders for Replacement. I m awaiting for Reply.
thanks & Regards,
Naveen Bhatia

Hi,
VL06 LIST OF OUTBOUND DELIVERIES
BR
Diwakar
reward if useful

How to send a link for a specific podcast file?

So I'm in my Podcasts directory in iTunes 5.0 and I've got a bunch of downloaded podcasts. Just listened to a particular one that I really like and I'd like to send a link for that podcast to a friend. How to get the link? I do a Get Info on the file and there's no URL anywhere.
Even if I manually add a podcast by choosing "Subscribe to podcast" from the Advanced menu, then entering the podcast URL, if I thereafter try to retrieve that URL from somewhere in the downloaded podcast, it's nowhere to be found. Surely I'm missing something obvious. Now there are a very few podcasts that seem to put that info in their "Show Description" (aka the "Podcast Information" window) but they're the exception.
Before you suggest control-clicking in the iTunes Music Store and choosing "Copy iTunes Music Store URL," note that that doesn't get close to the mark at all, and besides, I need to do this for podcasts that aren't on the iTunes Music Store. Thanks!

I should probably give an actual example to make myself clear. When you refer to clicking the "i," note that doing that is what I was talking about when I wrote: "there are a very few podcasts that seem to put that info in their 'Show Description' (aka the 'Podcast Information' window) but they're the exception." In other words, clicking the "i" opens the Podcast Information window. Same window opens if you choose "Show Description" from the contextual menu that opens when you control-click on the feed name.
But the URL that appears in the Podcast Information window (besides not being selectable for copying and also being in a window that disappears if you switch apps), is just the link to the RSS page that lists ALL the episodes. It is not a link to a specific episode. What I want is the ability FROM A DOWNLOADED PODCAST EPISODE to extract the link for that specific episode. I guess this would be equivalent to clicking the "Get" button next to a dimmed episode that has not yet been downloaded, though I don't really care that clicking that link (if I could find it) wouldn't automatically download the episode into iTunes for the person to whom I would send the link.
So, for example, the link that I can extract from the KCRW On the Beat podcast is this:
feed://ax.phobos.apple.com.edgesuite.net/WebObjects/MZStore.woa/wa/podcastRSS?id =73331691
But what I want is to get the link (from within iTunes, not by visiting the web page) of the "Our Pop Stars Lead Us" episode, which is here:
http://66.186.18.80/podcast/mp3/ob/ob050907Afterthe_DelugeOur.mp3
See what I mean?

Send my iphone for replacement, Iphone is replaced and has a new IMEI. Now I need to pay approx 100 Euros to get my phone legally registrered again in Turkey.

The thing is if you get a phone from another country and want to use it in Turkey you need to register your IMEI code and pay a fee of approx 100 euro to get it registrered officially + u need to show a stamp of entering the country on your passport. This is done to prevent stolen phones to be sold.
Now the thing is.. I registrered my imei of my iphone 4. But after some time the homebutton wouldnt work so i send it to get replaced. Now the iphone 4 got replaced = refurbished = new IMEI. That means I got to register again and pay 100 euros.
Internally Apple knows that my old IMEI is replaced to another one. Cant I get an official document or whatsoever to prove it?
Does this mean I am screwed ? (Pardon my English, its not my main language.)

All cell phones, when replaced, will have a unique IMEI. This is not unique to Apple. If you want documentation that it was replaced by Apple, ask Apple for documentation.
We have no way of knowing whether they can or will provide this. We're just customers like you.

How to send multiple data for a single element

Hi All,
I have a requirement where I have to send multiple data for single element per single transaction. For example
Id details
1 abcd
1 efgh
1 def
Now, when I am selecting this ID from database, I have to get all the details in a single xsd like
<id>1</id>
---><details>abcd</details>
<details>efgh</details>
<details>def</details>
Thanks

Hi,
The following XSLT...
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:template match="/">
<xsl:variable name="root" select="/"/>
<root>
<xsl:for-each select="distinct-values(/root/entry/id)">
<xsl:variable name="id" select="."/>
<entry>
<id><xsl:value-of select="$id"/></id>
<xsl:for-each select="$root/root/entry[id = $id]">
<details><xsl:value-of select="details"/></details>
</xsl:for-each>
</entry>
</xsl:for-each>
</root>
</xsl:template>
</xsl:stylesheet>Will work for a document like this...
<root>
<entry>
<id>1</id>
<details>detail1</details>
</entry>
<entry>
<id>1</id>
<details>detail2</details>
</entry>
<entry>
<id>2</id>
<details>detail3</details>
</entry>
</root>Hope this helps...
Cheers,
Vlad

How to Send biulk mail for 20,000 people with out blocking the mail server

Hi .......... ALL
I am developing a News module in our project, for this have to write code to send everyday news for 20,000 mail Ids
I Developed a code that can send to one Id or multiple.
Weather this type of mail sending treated as spam mail or blocking the mail server i did not know, any of one can please help me.
If this type is not suitable then what is way to send bulk mails please guide me
please help me......................
BY Ramds
MY Mail ID: [email protected]
Edited by: ramdasteja on Oct 3, 2008 4:13 AM

Hi .......... ALL
I am developing a News module in our project, for this have to write code to send everyday news for 20,000 mail Ids
I Developed a code that can send to one Id or multiple.
Weather this type of mail sending treated as spam mail or blocking the mail server i did not know, any of one can please help me.
If this type is not suitable then what is way to send bulk mails please guide me
please help me......................
BY Ramds
MY Mail ID: [email protected]
Edited by: ramdasteja on Oct 3, 2008 4:13 AM

Sending iPod in for repair/replacement

I am debating whether I should or not...
Do I call apple first?
If so, what's the number? (I'm in Canada and I think the closest place is in Toronto)
Do I have to send anything with it? (bill, earbuds, usb cord, etc.)
How long would I have to wait?
Can they replace minis? (I heard they don't make them anymore)
Would I get a nano instead? (I know someone who sent in their video and got a thinner one with a better battery and brighter screen)
I need to know before I decide to send it in...

First of all, why does your iPod need service?
Alright...
1. No
2. There's a link at the bottom if you want it.
3. No, but there's instructions on the box they send you.
4. Depends...estimates are about 2 weeks for engraved iPods, 3-4 days for not engraved ipods. However, my engraved one came back in a week and a half.
5. Yes
6. No, you'll get back the same model you send in (same generation, Hard Drive size, color, engraving, everything).
Apple Phone Contacts
iPod Service Request
I hope this helps!

Where do I send my 1st gen ipod nano for replacement?

I live in New Zealand and am having difficulty finding where abouts to send my ipod for the recent recall. The link on http://www.apple.com/support/ipodnano_replacement/
does not show my country and I can't find it in store locater either.

You need to bring it in to your nearest Apple Store reseller in your area. If you are unsure of where this is, ask around.
B-rock

How to send ipod in for replacement online

Similar Messages

Maybe you are looking for