How to send left and right of stereo sources to different targets?

Hi
Suppose I have an instrument track or audio track in stereo, and I want to send the left side of it to one bus and the right side to another bus, is there an easy way of doing this without creating two duplicate tracks (and panning one hard left and the other hard right)?
Similarly, suppose I have routed a track into a bus which contains an effect, a phaser for example, which is in stereo, and I want to put a delay on just the right and side but not on the other. Is there an easy way of doing this (without for example routing the output of the phaser bus to two separate busses and panning them hard left and right and then routing the right bus to another bus which contains the delay)?
Thanks if anybody has any suggestions, I'm playing around with this sort of stuff at the moment but its gettings too spaghetti. Am I being daft and the ability is there I just haven't found it in the manual?

Well, I did just what you´re asking about the other day. In order to process a stereomix with MS technique, I needed to send the left channel to bus 1, the right to bus 2. So I turned off Universal Track Mode. This enabled me to route the output to Bus 1-2 instead of Output 1-2.
I believe this should work for you, too. It´s a bit fiddly, and you mustn´t forget to turn Universal Track Mode back on if you continue with another project. Otherwise things might get very complicated indeed.
/j
Message was edited by: juhani h.

Similar Messages

How to split left and right sound signal from SI READ Stereo?

How to split left and right sound signal from SI READ Stereo?
I want to display the left and right sound signal in two graph separately,what shall I do?
That is how to split 2D arry to two 1D arry?

Hello,
Here's another trick...although the "Index Array" suggestion will work, you should investigate using the "Delete from Array" function...you can tell it to delete one of the columns (or rows), leaving one column (or row)...the function will output both the resulting array AND the deleted array, which happens to be the other row/column...this method might not be as intuitive, but it only makes one copy of data in memory, while the Index Array method makes two copies.
I hope this suggestion helps. I only found out about this trick with "Delete from Array" the other day.
Have a great weekend!
Sincerely,
Darren Nattinger
Applications Engineer
National Instruments
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

? how to add page numbers in pages 5.2, starting with 2. Pages '09 had an option to not show folio on page one. Also any how to do left and right folios for a Tabloid? Many trhanks

? how to add page numbers in pages 5.2, starting with page 2. Pages '09 had an option to not show folio on page one. Also any idea how to do left and right folios for a Tabloid? Many thanks . . .

Hello jacquemac,
Your first question:
There might be a better way of achieving what you wish to do, but following these steps could help you out.
You might want to blend in Thumbnails and Invisibles either with (cmd+shift+i and cmd+alt+p) or over the View section in the Menubar.
1. go for Documents (right end of the Toolbar) -> Section
2. place your cursor at the very top of your second page and click "Create new Section->Starting with this page" in the side bar on your right.
(what you are actually doing next is setting the pagenumbers for each section you created. You can see your sections in the Thumbnail view.)
3. click on your first page (the first and only page of your first section) and mark the checkbox "Hide on first page of section"
4. click on your second page (the first page of your second section) and "Insert page number" -> start at 1
Your second question:
Im not quite sure i understand what exactly you want to do here. One page, two columns, each column with another page number? As far as i know this is not possible.
greetings jl

How to group Left and Right audio tracks from a .OMF file?

Hi, i'm editing the sound of my short film, i've sent a .OMF to audition from premiere, but the left and right tracks are seperate tracks in the multitrack session, how would i group them so whatever i do to one channel, will be done to the other

This is because the OMF specification requires mono audio files
It really depends on what you are trying to do with the two tracks as to the best answer as far as 'grouping'
You could select all the clips on both tracks and right mouse click and select 'group'
You could send both tracks to a bus
You could export the two tracks to a stereo file and bring that back into the session
Lots more things I'm sure but a little more detail as to what you are trying to do would help

How to separate left and right audio channels?

I've imported some AVCHD footage that had audio recorded separately to each channel, left and right. When I put a clip in my timeline, I can separate the audio tracks, but I can't edit them individually. When I bring down the level to 0db on one track and play the clip, the audio meter still shows equal levels on both left and right channels. Any advice?
Second question - I transcoded some AVCHD footage to MP4 and can't figure out if the audio tracks remain separte after the transcoding. I used Free MTS M2TS Converter to do the transcoding. While I can choose 'dual mono" for an AVCHD clip, I do not have that same option for the MP4 clip. It offers me "6 mono" but not dual mono. Any advice?
My concern is that when I provide my clients with raw MP4 footage with right and left audio recorded separately, that they'll be able to edit each track individually.
Thanks!

Thanks Tom. I recorded 2-channel audio, not 5.1 surround. Six mono was only an option on the MP4 clip. I did change the channel configuration from stereo to dual mono on the AVCHD clip, but I still wasn't able to edit the audio independently. Even when I mute one track, the audio meter still shows equal left and right levels.

How to separate left and right channel in audiotracks

I would like to adjust audio tracks left and right channels separetly from each other. Now the volume levels are linked together. Is there a way to separate them?
Other question is ; for some reason the pan slider in viewer does not seem to have left/right affect but kind of mono/stereo affect. It is supposed to be so, or do I have some audio preference button in wrong position?
Message was edited by: TRST

To answer to myself: Go to the User Manual and read the Chapter Audio Editing Basics from page 425.
Or click the clip in timeline which you want to change, and go to Modify---> uncheck the stereo pair option in there.

Carousel Appearance. How to narrow Left and right margins (ADF 11.1.2)

Hello,
I need help to adjust the appearance of a carousel component.
As you can see in the picture i need more space for the current page of carousel (need to enlarge the current page) and i want to narrow the space marked with a red line (left and right).
Property settings available do not help.
Can anyone have an idea?
[http://i52.tinypic.com/28arlma.png]

Hi,
did you try skinning ?
http://download.oracle.com/docs/cd/E16162_01/web.1112/e16181/af_skin.htm#BAJFEFCJ
The skin tag documentation is here
http://download.oracle.com/docs/cd/E16162_01/apirefs.1112/e17497/toc.htm
Just have a look for what is available for af:carousel (and note the new skin editor)
Frank

Left and right key press going to different markers

Hello there does anyone know exactly how to set the key press
of the left and right arrow keys on the key board so when i press
the left key it goes back a marker and when pressing the right key
it goes to the next marker. I am fairly new to lingo so any help
would be great and as simple as possible thanks

Hi,
I've created a slide show type application where arrow keys
as well as PageUp and
PageDown were used to move forward and back. Forward and Back
were not always
'previous' or 'next' markers. So, I created buttons on the
stage that acted as
forward and back, and each button had the regular mouseUp
event with the link to
the suitable location. I actually put the buttons off stage
and in a movie script
at:
on keyDown
case the keyCode of
121 : sendSprite (10, #mouseUp) -- pageUp
116 : sendSprite (11, #mouseUp) -- pageDown
end case
end
Using the 'sendSprite', when the user pressed a key, I could
activate the behavior
attached to the related navigation sprite. And, I could
easily add or remove key
controls by changing the movie script.
I have more info on using sendSprite, sendAllSprites and call
commands at::
http://www.deansdirectortutorials.com/Lingo/sendSprite.htm
regards
Dean
Director Lecturer / Consultant / Director Enthusiast
http://www.deansdirectortutorials.com/
http://www.multimediacreative.com.au
email: [email protected]

How to add left and right margins in Topic?

Hi
I am using RH10, as part of TCS4. I am creating screen layouts by just modifying the existing ones.
I noticed that there is no margin/ space between the topic border and the topic content in it. When I searched for that in mobile.css, I did not find any relevant reference. When I did a Inspect Element on Firefox, it pointed to default.css which I don't find in my Project Setup pod.
How can I modify it? Here is the screenshot of the issue I am referring to:
Please advise.
Sreekanth

Or right click the css, click Edit With > HTML Editor and apply a margin left and margin right to the Body tag. That will affect all the styles in one go.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How to move Left and Right audio components

At a performance, there was a delay between what my camera recorded from a soundboard on the left track and what it recorded from a shotgun mic on the right track.
I want to move each track (Right and Left) independent of each other using FCP 10.1.2
So far I have successfully changed the audio from Stereo to Dual Mono and I have Expanded Audio Components.
I am not able to move either track. No matter wether position or arrow is selected I looks like a range selection over the track and it will not move.
Any help would be greatly apreciated!

Yes, that screen shot of your Cam5 video and its right and left audio being staggered is exactly what Im trying to do. Im sorry I have not been able to describe this better.
It was the “Detach Audio” option that was giving the messy appearance.
This time I only made two adjustments done in the Timeline.
I followed these two steps:
1. I select the clip on the Timeline and chose “Expand audio components”
2. Then selected the video clip again and chose “Dual Mono”
Here is a screen shot of what it looks like now:
Just like before, I can manipulate the audio levels but when I attempt to drag either audio a box is drawn over the clip that looks like the “range select” tool. This happens when I have either arrow or position is selected. Nothing can be moved. I tried these two basic steps on my other computer using an older version of FCPX and get the same result.
The work around that I described above allowed me to finish this project by my deadline but this is still something I would like to learn since it’s a pretty basic function of FCP that I need to be able to do a lot.
Thank you Tom for your continued help and guidance.

How to remap left-and-right Command key separately?

This was asked earlier with no resolution, but maybe things changed in last 1.5 years -- is there a way to remap Right and Left control to different functions? I'd like Right Command key to function as Control and leave the left one as Command

I think the answer is the same as last year. Don't know of any way to do that.
Captfred

In Final Cut Pro X 10.1.1 I'm trying to separate left and right stereo tracks to delete left and pan right to centre. I cannot find a way to do this.

I record in stereo with a 10KHz tone down the left channel to defeat AGC on my camera and mic feed into the right channel. When I edit, I want to mute/delete the left channel and pan the right into the centre, to leave me with mono audio across both left and right. I could do this easily in FCP 6 but can find no way to do it in FCP X. I'm using the same source files. When I choose Dual Mono mode in the Audio Inspector, it mixes left and right and pushes the combined signal into both channels, giving me a mix of 10KHZ tone and audio in both left and right. Stereo mode shows me the two channels correctly with one driven hard (the tone) and the other at good voice levels. I just want to kill the left channel and pan the right to centre.
I'm converting original TOD files using MPEG Streamclip before import and definitely keeping audio as stereo.
This is driving me nuts! It should be simple and is in FCP 6. Any help greatly appreciated.
Stereo Setting
Mono Setting

Mb - If you're using FCPX 10.1.1 and Mavericks, make certain you've downloaded the most current Sony XDCAM FCPX plugin from sonycreativesortware.com unless you're using an older version of FCPX and then you'd need the previous XDCAM plugin.
You shouldn't see 8 mono tracks. There are import settings in /fCPX that you can check and I don't ask FCPX to analyze my media or seperate mono or combine stereo, etc. I like to have everything come in as it is, especially because I know what I've done with every channel, etc.
What I wrote to Ian is what I'd tell you - so please take a look at how you can make a "stereo" track that is actually two mono tracks, mono. Once you do that you can address each mono channel by itself since it needs different volume, compression, and EQ than other channels.
There are ethernet, USB, and firewire controllers that work in FCPX, but that's not the typical workflow because generally if you're getting into any amount of post audio sweetening beyond basic "staples" audio treatment, you would instead use "Roles" to export your audio to Logic or Pro Tools and do you work in those applications and then cut the final product back into your FCPX project. In Logic or Pro Tools is where you might use a controller.
In terms of automating levels, I'm not positive I know what you mean. Compressor is a nice internal Logic plugin that kind of automates levels in a way but its about compressing peaks at a threshold that you set and at a ratio of compression. So I may not understand what other automation is available unless you've exported you tracks to Logic or Pro Tools.

Left and right button combo to emulate middle button?

Hi,
Anyone knows how to configure left and right button to work together to emulate middle button?, ie when pressing down both left and right button, it functions as middle button?
Simon

Hi and welcome to the forum sgao,
It's possible with a workaround, see this solution:- http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T510-both-touchpad-buttons-as-middle-click/...
Hope this helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Left and right audio in VCD

The VCD dramas that i bought consist of left and right audio that are of different language. Is there any program that i can use to convert the whole movie into mp4 movie with just one language ?
thanks

Select the clip in the timeline and open the audio tab in the inspector. Under the audio configuration label click the drop down arrow at the right and change stereo to dual mono. Go back to the timeline and right click the clip and select expand audio components. You can them change the volume of the two audios independently. After adjustment right click the clip again and choose collapse audio components.

Left and Right Side buttons

I just got a replacement 8330 because I dropped my previous one in a muddy puddle. I cannot remember how I originally re-programmed the left and right side buttons to run different applications than the default (camera, and voice dial). Can someone help me out?
Solved!
Go to Solution.

Options > Screen/Keyboard > Left and Right Convenience keys.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to send left and right of stereo sources to different targets?

Similar Messages

Maybe you are looking for