How to send mail after downloading iOS5 onto iPhone 4?

Hello
While setting up iOS 5.0 i was alerted my home POP email was needing verification for my existing ME account, even though I'd never used home POP account before. I did verify it and have both it (in Canada a Telus service provider '[email protected]') and my existing ME account verified.
I am able to send mail on iphone with Me account but not with Telus account.
I rebooted both computer and phone, deleted and re-set up Telus account on iPhone, and still not able to send mail.
Any help would be most appreciated.

I have the same problem. The downoad went smoothly with no errors displayed. My phone updated just fine, all my apps appeared and nothing was lost. The phone with iOS5 worked perfectly for about two hours and suddenly, nothing. No home+lock button combo, no home button, no response when placed on a charger, my computer won't even recognize that a device has been plugged in. This is horribly frustrating, especially considering how much searching I had to do just to find out that someone else had this problem. I hope mine wakes up for a second in the morning at least.
Does anyone know what to do about this?

Similar Messages

After download ios5 my iPhone dose not work like before why?

After download ios5 my iPhone dose not work like before why?
i have iphone 3gs

OK this is the issue after download ios5 my phone goes crazy like when i turn on my 3G i can`t call someone and i cant even check my email i don't know why ...so after all this problem i have to turn 3G off and than call to my friend so why it work like this ?
i restore my phone ...i restore as a new phone but still i have the problem ....

How to send mail after job abort

Hi,
how can I send an email when a job is aborted? Or is there a system event if a job aborts?
Thanks for your help
Lutz

You might want to look into ABAP. Basically a generic job that would get called, to send email, whenever a certain job "aborts", but then you'd also need a wrapper job for detecting the bad return code. help.sap.com has some info on that (using events to trigger jobs), like this:
http://help.sap.com/saphelp_47x200/helpdata/en/fa/096f33543b11d1898e0000e8322d00/frameset.htm
or this (the full-control method)
http://help.sap.com/saphelp_47x200/helpdata/en/fa/096f33543b11d1898e0000e8322d00/frameset.htm
CCMS can also monitor job status too, as the other poster said,
http://help.sap.com/saphelp_47x200/helpdata/en/fa/096f33543b11d1898e0000e8322d00/frameset.htm
however it's very limited. Especially if you want to use logic for the alerts (ie only certain jobs should alert upon failure, certain times of day, recipients, etc). It's all possible with CCMS, I've seen it done before using scripts that read CCMS external alerting but it's probably easier just adding event triggers to your critical jobs.

After downloading iOS5 on iPhone 4, the volume buttons and switch on phone's side won't work? All "Settings" are correct, but phone is completely silenced at all times. Solution?

There is no longer a Lock noise, Key clicks, Phone Ringer, camera shutter noise, etc.

has anyone solve this problem? i upgraded my iphone 4 to 5.1.1 and now i can see only ""We're sorry, we are unable to continue with your activation at this time. Please try again later, or contact customer care."
i tried mani sim card, laptops, wifi. but for 7 days the problem is still exist....
Please help me!!!

HT4972 after downloading ios5.1.1 how do you get your music back on your ipod?

after downloading ios5.1.1 how do you get your music back on your ipod

Sync it from your iTunes library
Redownload iTunes purchases by
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If it was not in your iTunes library and you updated via iTunes you will have to get the music again sinve synced media like apps and music are not include din the iPod backup that iTunes makes.

How do I download IOS5 onto a first generation ipad? Software Update does not appear under General in Settings on the 1st generation.

How do I download IOS5 onto a first generation ipad? Software Update does not appear under General in Settings on the first generation ipad.

The Settings > General > Software Update option only appears when you have iOS 5+ installed, if you have iOS 4 then you will need to do the update via your computer's iTunes.
Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
Then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button
Updating to iOS 5+ : http://support.apple.com/kb/HT4972

After downloading ios5 to my ihpone 3gs I lost all of my music, anyone else with that same problem. How do I get my music back, it's not on Itunes either!!

After downloading ios5 to my ihpone 3gs I lost all of my music, anyone else with that same problem? How do I get my music back, it's not on Itunes either!!

After downloading ios5 to my ihpone 3gs I lost all of my music, anyone else with that same problem? How do I get my music back, it's not on Itunes either!!

Does anyone know how to download Siri onto iPhone 4 as I don't have the iPhone 4s I do have ios5 on my phone

Does anyone know how to download Siri onto iPhone 4 I have right op system and don't have iPhone 4s

The Huntress,
I am aware of the Terms of Use of this forum.
On the contrary I suggested NOT to go on that route.
Didn't provide support didn't discuss, just mentioned.
Also mentioned the risk of losing warranty, performance and battery life.
Our friend Vince will probably find a solution like the one I mentioned and that's the reason I mentioned that there is availabl, BUT NOT recommended.
I am not an native english speaker, but I think it is quite obvious that the post is against jailbreaking.
Cheers.

How to stop Mail from downloading automatically even it is set not too

My mail programme preferences are set to download manually.
In advanced, the account is not 'included in automatically checking for new mail'
I use scripts to send mails after certain tasks are ready. Sometimes (randomly) mail all of a sudden downloads all mail.
Anybody know what could cause this?
How to stop it as I do not want it to download mail at all as I use an other programme for reading and writing mail.

Hi Mulder
What you're describing doesn't make sense. Mail doesn't download mail if it's set to wait for a manual initiation.
I know however...
But once that is check is initiated, any and all waiting mail will be downloaded.
I know.
I've never heard of this happening before, to anyone. Unless your preferences are corrupted, which there's no indication of at this point, something else is triggering Mail to check for new email.
I never heard either, hence posting
But if you're using some other program for sending and receiving email, why would you have that account setup in Mail, as that would defeat the purpose of supposedly using that other program. If you really want to eliminate the possibility of this happening, you would need to delete that account in Mail, and backup the mail for that account before you delete it.
complex issue, but rather keep both programmes.
Otherwise, we need more details, including which version of Mac OS X you're running, and the other program that you're using for email.
OS 10.5.5
Mail 3.5
other programme Entourage

How to stop Mail form downloading automatically

My mail programme preferences are set to download manually. I use scripts to send mails after certain tasks are ready. Sometimes (randomly) mail all of a sudden downloads all mail.
Anybody know what could cause this? How to stop it as I do not want it to download at all.

Thanks haroldo1
haroldo1 wrote:
Verify that Mail/Preferences/General Check for New Mail is set to Manually.
It so is!
Just a guess, you could also eliminate the incoming mail server information and eliminate it's ability to download (...I do not want it to download at all...).
If I do that (and no it never needs to download only upload) Mail flips out as it wants the information. I tried this.

How to send mail to distribution list ?

Hi Everybody,
Pls let me know how to send mail to distributed list???
Thanks & Regards,
raju<b></b>

Hi ,
Use Function Module 'SO_NEW_DOCUMENT_SEND_API1'.
U need to pass Distribution list to Receiver and 'C' to receiver type refer the below code for clarification.
Determine the Distribution List.
        gv_rec_list-receiver = gv_distribution.
        gv_rec_list-rec_type = 'C'.
        APPEND gv_rec_list.
Check if Distribution List is deleted.
        SELECT SINGLE objnam
                 FROM soid
                 INTO lc_objnam
                 WHERE objnam = gv_rec_list AND
                       dlitp = lc_dli.
        IF sy-subrc = 0.
          CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
            EXPORTING
              document_data              = gv_doc_data
              document_type              = 'RAW'
              put_in_outbox              = 'X'
            TABLES
              object_content             = gv_obj_cont
              receivers                  = gv_rec_list
            EXCEPTIONS
              too_many_receivers         = 1
              document_not_sent          = 2
              document_type_not_exist    = 3
              operation_no_authorization = 4.
          CASE sy-subrc.
            WHEN '1'.
             message i001(as) with 'TOO MANY RECEIVERS'.
              EXIT.
            WHEN '2'.
             message i001(as) with 'DOCUMENT NOT SENT'.
              EXIT.
            WHEN '3'.
             message i001(as) with 'DOCUMENT TYPE DOES NOT EXIST'.
              EXIT.
            WHEN '4'.
             message i001(as) with 'OPERATION NO AUTHORIZATION'.
              EXIT.
          ENDCASE.
          Hope this might have helped you.
Thanks,
Prashanth

How can send mails using hotmail/rediffmail domain name?

I have used the below code to send a mail using javamail API?Even when I am sending my application does not have notified any of error/exceptions,But the message is not reached to I have given receipient's address in the to field.
import javax.mail.*;
import javax.mail.internet.*;
import javax.activation.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.util.*;
public class Sendmail1 extends HttpServlet {
private String smtpHost;
// Initialize the servlet with the hostname of the SMTP server
// we'll be using the send the messages
public void init(ServletConfig config)
throws ServletException {
super.init(config);
smtpHost = config.getInitParameter("smtpHost");
//smtpHost = "sbm5501";
smtpHost = "www.rediffmail.com";
public void doGet(HttpServletRequest request,HttpServletResponse response)
throws ServletException, java.io.IOException {
String from = request.getParameter("from");
String to "[email protected]";
String cc = "[email protected]";
String bcc ="[email protected]";
String smtp ="www.rediffmail.com";
String subject = "hai";
String text = "Hai how r u";
PrintWriter writer = response.getWriter();
if (subject == null)
subject = "Null";
if (text == null)
text = "No message";
String status;
try {
// Create the JavaMail session
java.util.Properties properties = System.getProperties();
if (smtp == null)
smtp = "www.rediffmail.com";
properties.put("mail.smtp.host", smtp);
Session session = Session.getInstance(properties, null);
//to connect
//Transport transport =session.getTransport("smtp");
//transport.connect(smtpHost,user,password);
// Construct the message
MimeMessage message = new MimeMessage(session);
// Set the from address
Address fromAddress = new InternetAddress(from);
message.setFrom(fromAddress);
// Parse and set the recipient addresses
Address[] toAddresses = InternetAddress.parse(to);
message.setRecipients(Message.RecipientType.TO,toAddresses);
Address[] ccAddresses = InternetAddress.parse(cc);
message.setRecipients(Message.RecipientType.CC,ccAddresses);
Address[] bccAddresses = InternetAddress.parse(to);
message.setRecipients(Message.RecipientType.BCC,bccAddresses);
// Set the subject and text
message.setSubject(subject);
message.setText(text);
Transport.send(message);
//status = "<h1>Congratulations,</h1><h2>Your message was sent.</h2>";
} catch (AddressException e)
status = "There was an error parsing the addresses. " + e;
} catch (SendFailedException e)
status = "<h1>Sorry,</h1><h2>There was an error sending the message.</h2>" + e;
} catch (MessagingException e)
status = "There was an unexpected error. " + e;
// Output a status message
response.setContentType("text/html");
writer.println("<title>sendForm</title><body bgcolor= ><b><h3><font color=green><CENTER>CALIBERINFO.COM</CENTER></h3>Your message was sent to recepient(s).<br><font color=red>"+"\n"+to);
writer.println("<br><br><a href=e:/mail/javamail/mail.html>back to compose</a>");
writer.close();
Please any one help me out from this probs.
Awaiting for yours reply,
or give me a reply to: [email protected]
Regards,
@maheshkumar.k

Hi,
how can send mails using hotmail/rediffmail domain name?In your java application,you specified www.rediffmail.com as your
smtp server.But that is the address of that website.Try will a smtp
server instead.For a list of free smtp servers,please visit http://www.thebestfree.net/free/freesmtp.htm
Hope this helps.
Good Luck.
Gayam.Srinivasa Reddy
Developer Technical Support
Sun Microsystems
http://www.sun.com/developers/support/

How to send mail in html format in jsp???

Hello everybody,
I have two jsp pages.In one page I have the heading like Date,Transaction.I am retriving data from my second jsp page.And I hae included the second jsp page to my first jsp page.How to send mail this content in html format.
Thanks
Srikant

MimeMessage m = new MimeMessage(session);
BodyPart messageBodyPart = new MimeBodyPart();
messageBodyPart.setContent(content, "text/html");this if u need to send a mail content as html

How to send mail with attachment

Hi,
How to send mail with word document as attachment in oracle pl/sql.
kindly help me .
thank you
regards
P Prakash

create or replace procedure pdf_mail(
    p_sender     varchar2, -- sender, example: 'Me <[email protected]>'
    p_recipients varchar2, -- recipients, example: 'Someone <[email protected]>'
    p_subject    varchar2, -- subject
p_text   varchar2, -- text
p_filename varchar2, -- name of pdf file
p_blob   blob     -- pdf file
) is
conn      utl_smtp.connection;
i number;
len number;
BEGIN
conn := demo_mail.begin_mail(
    sender     => p_sender,
    recipients => p_recipients,
    subject    => p_subject,
    mime_type => demo_mail.MULTIPART_MIME_TYPE);
demo_mail.begin_attachment(
    conn         => conn,
    mime_type    => 'application/pdf',
    inline       => TRUE,
    filename     => p_filename,
    transfer_enc => 'base64');
    -- split the Base64 encoded attachment into multiple lines
   i   := 1;
   len := DBMS_LOB.getLength(p_blob);
   WHILE (i < len) LOOP
      IF(i + demo_mail.MAX_BASE64_LINE_WIDTH < len)THEN
         UTL_SMTP.Write_Raw_Data (conn
                                , UTL_ENCODE.Base64_Encode(
                                        DBMS_LOB.Substr(p_blob, demo_mail.MAX_BASE64_LINE_WIDTH, i)));
      ELSE
         UTL_SMTP.Write_Raw_Data (conn
                                , UTL_ENCODE.Base64_Encode(
                                        DBMS_LOB.Substr(p_blob, (len - i)+1, i)));
      END IF;
      UTL_SMTP.Write_Data(conn, UTL_TCP.CRLF);
      i := i + demo_mail.MAX_BASE64_LINE_WIDTH;
   END LOOP;
demo_mail.end_attachment(conn => conn);
demo_mail.attach_text(
    conn      => conn,
    data      => p_text,
    mime_type => 'text/html');
demo_mail.end_mail( conn => conn );
END;
ref:
http://www.plpdf.com/23-1725.html
Edited by: Mahanam on Jan 9, 2011 10:32 PM

How to send mail in APEX 4.1 using PLSQL

Hi All,
How to send mail in APEX 4.1 using PLSQL?
Thanks In advance.
Regards
Shail

http://lmgtfy.com/?q=oracle+apex+4.1+send+mail

How to send mail after downloading iOS5 onto iPhone 4?

Similar Messages

Maybe you are looking for