How to send message from Message Driven Bean to JMS client?
In my project I have JMS client, two QueueConnectionFactory and Message Driven Bean. Client send message to MDB through the first QueueConnectionFactory , in one's turn MDB send message to client through the second Queue Connection Factory . I already config my Sun AppServer for sending message in one way, and sending message from MDB to the second QueueConnectionFactory. But on my Client there is an error : �JNDI lookup failed: javax.naming.NameNotFoundException: No object bound to name java:comp/env/jms/MyQueue2� (jms/MyQueue2 � this is the name of my Queue). So it couldn't get this message.
P.S.
Thank you for help!!!
What is the name of the second queue?is the connection factory on the local?Yes the connection factory is on the local. The name of my first queue is jms/MYQueue and the name of another one is jms/MyQueue2.
Similar Messages
-
How to send SMS ( Short Message Service ) from java code
Hi
How to send SMS ( Short Message Service ) from java code.
Thanks
GauravDo you need to receive SMS? If you need to receive SMS, you will need to host your own GSM device or modem so that people can send you SMS.
If not, you can just use internet SMS gateways like clickatell as mentioned above will do the work, and post to them by HTTP, XML or email. The cost is about 6-8 cents per SMS. There are cheaper services, but not always reliable. If you need to host your own GSM device, you can use software like http://www.kannel.org (GPL Open Source) or http://www.visualgsm.com. Alternatively, you may obtain a shortcode from your Telco - but these come with monthly subscription of maybe one or two hundreds.
Regards,
Joshua
<SMS Gateway>@Expert -
How to send a text message to a group of people and save the list for next time?
how to send a text message to a group of people and save the list for next time from an iphone 4s?
Hey there ipremacha,
It sounds like you need to enable Text Message Forwarding on your iPhone for your iPad to send MMS/SMS messages through your phone.
Connect your iPhone, iPad, iPod touch, and Mac using Continuity
Go to Messages > Text Message Forwarding, and enable the device(s) you would like to forward messages to.
Your Mac, iPad, or iPod touch will display a code. Enter this code on your iPhone to verify the SMS feature.
Thank you for using Apple Support Communities.
Regards,
Sterling -
How to send a SOAP message with attachments
How to send a SOAP message with attachments thru webservice using axis-1_3 can any one sujjest.............................
Please refer
http://www.javaworld.com/javaworld/jw-09-2003/jw-0912-webservices.html
http://xml.sys-con.com/read/40315.htm -
TS2755 is there a quick way to take a photo and send it from messages application on the computer
is there a quick way to take a photo and send it from messages application on the computer
Just the regular way. Take the photo and then open the Messages app and select that photo and send it. That does not seem hard.
-
How to get event from message?
Hi,All:
I write a run-time interface by CVI, I use TS_EngineRegisterUIMessageCallback to register my callback function, but when message passed to the callback function, as the type is struct IDispatch but not CAObjHandle, I don't know how to read event from message.
Can you help me to solve it? Thanks
Chang ZhangHello Chang-
If your question is simply how to obtain an object handle from an object of type IDispatch, have you investigated the function "CA_CreateObjHandleFromIDispatch"? I would recommend you look over the testexec.prj that is installed along with the TestStand engine (the CVI Operator Interface) and inspect how we handle our callbacks, this may help you understand how to go about emulating the behavior in your own project. To see this particular function in use it may be most helpful to look in the file 'engine.c' and inside the function UIMessageDeferredCallback here you will see the IDispatch pointer being handled and decoded for use by the TS engine.
Regards,
Elaine R.
Applications Engineering
National Instruments
http://www.ni.com/ask -
IDOC :: how to send data from Custom Infotype in SAP HR to third party
Hi,
I have created one custom Infotype by number 9020. How to send data from this infotype to third party system and also change pointers need to trigger for this infotype.
Please help me in doing it.
I am using one Custom Message type ZTALENT and Custom Idoc Type ZTALENT.
ZTALENT Talent Management
5 E1PLOGI Header for an HR Object (Master Data or Organizational Data)
5 E1PITYP HR: Transported Infotypes and Subtypes for an Object
ZPUSER User base Data File
ZPERSON Personal Information File Segment
ZPOST Position File
ZOPE Overall Performance
ZPWORK Outside Work Experience
ZPEDUC Education Details of Employee
E1P0000 HR: HR Master Record Infotype 0000 (Actions)
E1P0001 HR: HR Master Record Infotype 0001 (Org. Assignment)
E1P0002 HR: HR Master Record Infotype 0002 (Personal Data)
E1P0016 HR Master Record: Infotype 0016 (Contract Elements)
E1P0022 HR Master Record: Infotype 0022 (Education)
E1P0023 HR Master Record: Infotype 0023 (Other/Previous Employers)
E1P0041 HR Master Record: Infotype 0041 (Date Specifications)
E1P0105 HR: HR Master Record Infotype 0105 (Communications)
ZE1P9020
ZPLANG Language Details
ZACTION Actions Changes
Regards,
KrishnaHello Shankar,
Technically TEMSE files are read by calling the following 3 function modules in sequence,
1) RSTS_OPEN_RLC or RP_TS_OPEN: open the temse object
2) RSTS_READ : read the object
3) RSTS_CLOSE: close the object
Regards,
Rajesh -
Deleting message from Message Handler
Hello,
I want to delete some message that are getting displayed on ECM UI from SAP in the BADI HRECM00_CONSISTENCY.
There are several methods available for adding and getting messages from message handler in class CL_HRPA_MESSAGE_LIST
but there is no method for deleting message from message handler.
Please let me know if any one of you have any idea,how to delete messages from message handler.
Message handler has reference to CLASS CL_HRPA_MESSAGE_LIST in the BADI.
Thank you
ArvindHello
In the BADI the messages are not coming in internal table but are in class instance (message_handler).I have got the messages in internal tabe now.But after deleting it this needs to be again added in message handler in such a way that old one are removed and new one are added only.
This is required as message handler will be carrying the message to ECM user interface where it will be displayed.
Currently all the message are going to UI,my requirement is to send only my message to UI.
Thank you
Arvind -
Can't edit email saved in draft or figure out how to send it from there
I wrote up an email yesterday and saved it in the drafts folder since I didn't want it to go out until today. When I go in to drafts in Mail I can see the message as I left it but I can't figure out how to send it from there. I also tried to make a quick change and it wouldn't let me do that either. There is a jpeg attachment in the email but I don't see why that would prevent me from editing the message. Any help would be appreciated.
That's what I thought I was supposed to do but double-clicking wouldn't do anything. I just solved the problem somehow by moving the message from the drafts folder to the sent folder and back to drafts again and then the double-click worked and I was able to send it. Not sure what the problem was but thanks for the quick reply.
-
How to send sms from iPad via iphone
How to send sms from iPad via iphone?
You don't easily.
The pad, with I message turned on, will send text like messages to any other ios5 user that has I message turned on.
The pad is not a phone, and does not have the radio to send 'real' SMS messages, which use the phone channel.
There are a few apps in the store that will convert messages to SMS, for use with non apple folks. Check out the app store. Search SMS. -
How to sending email from Oracle Forms
How to sending email from Oracle 6i(Forms)
I need to send email to a distribution list(multiple email addresses).send email of multiple email address
[email protected],[email protected],[email protected]
create or replace function mailout
(sender in varchar2,
recipient in varchar2,
ccrecipient in varchar2,
subject in varchar2,
message in varchar2) return number
is
crlf varchar2(2) := chr(13)||chr(10);
connection utl_smtp.connection;
mailhost varchar2(50) := 'Add email server Ip Address here';
header varchar2(4000);
v_num number :=1;
str number:=0;
email varchar2(50);
begin
connection := utl_smtp.open_connection(mailhost,25);
header := 'Date: '||to_char(sysdate,'dd mon yy hh24:mi:ss')||crlf||
'From: '||sender||' '||crlf||
'Subject: '||subject||crlf||
'To: '||recipient||crlf||
'Cc: '||ccrecipient||crlf||message;
utl_smtp.helo(connection,mailhost);
utl_smtp.mail(connection,sender);
utl_smtp.rcpt(connection,recipient);
while (instr(ccrecipient,',',1,v_num)>0) loop
email:=substr(ccrecipient,str+1,instr(ccrecipient,',',1,v_num)-str-1);
dbms_output.put_line(email);
utl_smtp.rcpt(connection,email);
str:=instr(ccrecipient,',',1,v_num);
v_num:=v_num+1;
end loop;
utl_smtp.open_data(connection);
-- utl_smtp.write_data(connection,header);
utl_smtp.write_data(connection,'MIME-Version:1.0'||crlf||'Content-type:text/html'||crlf||header);
utl_smtp.close_data(connection);
utl_smtp.quit(connection);
return 0;
exception
when utl_smtp.invalid_operation then
dbms_output.put_line('Invalid Operation in SMTP transaction');
return 1;
when utl_smtp.transient_error then
dbms_output.put_line('Temporary problem with sending email ');
return 2;
when utl_smtp.permanent_error then
dbms_output.put_line('Permanent problem with sending email ');
return 3;
end; -
i bought my new iphone 5 but i am unable to send mms from my iphone .so can u plz guide me how to send mms from iphone 5
Try here...
Troubleshooting Messages
http://support.apple.com/kb/TS2755 -
Fetching Message from message class into variable
hello all,
can anyone please tell me that how can i fetch the message from message class?
because i have to take that message in one variable and have to pass it in function module.
regards saurabh.Hi,
DATA : MESSAGE TYPE STRING.
Select TEXT from t100 into MESSAGE where SPRSL = 'EN' ARBGB = 'YOUR_MESSAGE_CLASS'
msgnr = 'YOUR_MSGNR'
or if you want all the messages to fetch in a single query to avoid performance issue
Select * from t100 into itab where SPRSL = 'EN' ARBGB = 'YOUR_MESSAGE_CLASS'
Cheerz
Ram -
How to send data from internal table to the shared folder in ABAP
Hi experts,
My requirement is to transfer data from a file to shared folder. i just did reading data from a file to a internal table. Now i want to send this internal table data into a shared folder which is "
xxx\y\z....".
I do not have any idea on how to send data from internal table to the shared folder path.
can anybody please help me out how to do this?
Thanks & Regards
Sireesha.Where that folder is located, its on presentation server i.e. desktop or application server.
If its on presentation server, use FM GUI_UPLOAD.
If its on application server, then use DATASET functions. Have a look at below link.
[File Handling in ABAP|http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3ca6358411d1829f0000e829fbfe/frameset.htm]
I hope it helps.
Thanks,
Vibha
Please mark all the useful answers -
I have iphone 3gs, how to send song from my computer?
i have iphone 3gs,
how to send song from my computer in iphoneYou sync it or use iTunes Match.
Maybe you are looking for
-
My husband and I share our iTunes libraries. When I click on his library it automatically begins to download his music into mine. I don't want to do that - I just want to listen to some of his music or to move specific songs into my library -- I do
-
How to load brush presets below wet media brushes?
How do I create brush presets below my wet media brushes like I have in this photo. I did it before, but I don't know how? Please help.
-
Deploy Embedded features of WE81IP using MDT 2013
I would like to deploy Windows Embedded 8.1 Industry Pro and configure the embedded features using MDT 2013 as described in this Windows Embedded blog post. I've imported the WE81IP image and created a task sequence but the Install Embedded Features
-
Can u any imrove this query for maximum performance
select g_com_bu_entity bunt_entity , g_com_rep_cd srep_cd , effdt from_dt , eff_status , g_com_role role , g_com_pgm prgm , g_com_district district , g_com_draw_status draw_status , decode(g_com_primary_pgm, 'Y
-
Workflow Customization for Order Book
Hi All, I want book order as soon as it save the order ...I dont want to mannually click on book order...is it possible through workflow...? If is it possible then how..? Plz advice me.. Thanks Raman