How to Send Multiple Plot XY Graph from LabVIEW to Microsoft Excel

The link below describes exactly what I would like to do, however the link to the solution/work around does not work.
Has anyone got an alternative solution?
http://digital.ni.com/public.nsf/allkb/CFD30D5E9C01AB5386256CFB0082AF3E

Please check the link again as it seems to be working fine now.
How to Send Multiple Plot XY Graphs from LabVIEW to Microsoft Excel:
http://digital.ni.com/public.nsf/allkb/CFD30D5E9C01AB5386256CFB0082AF3E
The standard Excel Insert Graph.vi cannot insert multiple XY Graphs to Microsoft Excel, so you will need to use the Report Generation Toolkit for Microsoft Office. You will find a link to an example program at the bottom of the page. I have also attached it below.
Attachments:
example.zip ‏35 KB

Similar Messages

How to send multiple material in our own message type

Dear All,
Any idea about how to send multiple material in our own message type,In my outbound i have created a message type but able to send only one material through program. If i give range of material its in error status 26 in WE02 and failed to send.
Help me ASAP.
Thanks & Regards,
Arun.

hi Gordon,
I want to receive the IDOC data for message type WPUUMS from a java server. Currently i am working on sample values for segments
E1WPU01
E1WPU02
E1WPU03
E1WPU04
E1WPU05
E1WXX01
I am facing problems in passing the correct values .
Its throwing a error message status 51.(Application document not posted) IDoc not fully processed.
can you help me with some dummy data for all the fields in the above segments.
reply ASAP
regards
arun
Edited by: Arun Kumaran on Aug 22, 2008 3:33 PM

Turn off a single plot of a multiple plot waveform graph

I have a multiple plot waveform graph (4 plots). I want to turn off one of the plots, say plot 2. Is this posible from the graphs property node? The property node seems to only give a reference to plot 0. I am using labview 7.
Cheers,
Wayne

I think you can use "active plot" together with "plot.visible"
property node to control which one you'd like to display. By default,
the property node refers to plot 0, but you can change to plot 1 or
other plots by changing active plot property node. You can search
"Plot" in LabVIEW Help if you'd like to know details.
Good luck,
Jian
On 18 Feb 2004 03:28:49 GMT, [email protected] (Computerman74)
wrote:
>>
>>I have a multiple plot waveform graph (4 plots). I want to turn off
>>one of the plots, say plot 2. Is this posible from the graphs
>>property node? The property node seems to only give a reference to
>>plot 0. I am using labview 7.
>>Cheers,
>>Wayne
>>
>>
>>
>>
>>
>>
>
>I would love to know if this is possible. I have been trying to figure i
t out
>myself.
>There is a way to turn a single array off and that is what I am doing for now
>untill this is possible. The plot is still there but reads zero when tunred
>off. It would be cool to have the abillty to turn off a single plot.
>I have tryed all the property nodes with no luck. The answer may be in the
>array size but I can't seem to control that either.
>For now you can use wire all 4 channels using the comparison select. Use a
>constant of 0 And wire up a swtich. When the input is false the output is zero
>in effect making the plot inactive but it still there.

How to generate multiple output pdf's from one oracle reports

how to generate multiple output pdf's from one oracle reports.
I have a report where I have to generate more than one output files from the same report based on a parameter.
Each output file is for each parameter.
Is this possible in oracle reports, is so how ?

You can better post your question in the reports forum instead of this pl/sql forum.

How to send active links in email from firefox. Works in IE but not Firefox... Is there a setting to change?

how to send active links in email from firefox. Works in IE but not Firefox... Is there a setting to change?
== This happened ==
Every time Firefox opened
== Always

Check with your web mail service provider for help with that issue.

How to send multiple attachements in single mail

Hi All,
Currently i am using this function module SO_NEW_DOCUMENT_ATT_SEND_API1 to send mail with only one attachment.
But now i need to send multiple attachments to a single mail.
Can any one please tell me as how to send multiple attachments in single mail.
Thanks in advance.

Hi
See this and do accordingly
Mailing with Attachment by ABAP Coding
Refer this link:
Mail with attachment.
FORM send_list_to_basis .
DATA: w_path      LIKE rlgrap OCCURS 0 WITH HEADER LINE,
        lt_index    TYPE sy-tabix,
        doc_type(3) TYPE c,
        descr       LIKE it_objpack_basis-obj_descr,
        temp_data   LIKE w_path,
        temp1       TYPE string,
        tab_lines   TYPE i,
        langu(15)   TYPE c,
        expirydate TYPE so_obj_edt,
        L_FILE1(100).
CONCATENATE 'C:\' sy-repid '_' sy-datum '.XLS' INTO L_FILE1.
W_PATH-FILENAME = L_FILE1.
APPEND w_path.
CLEAR w_path.
wa_doc_chng-obj_descr = 'User List not logged on for 180 days'.
wa_doc_chng-obj_langu = 'E'.
wa_doc_chng-obj_expdat = sy-datum.
CLEAR w_subject.
CONCATENATE 'Please find attached document with list of users'
              'not logged on for 180 days for client' sy-mandt
              INTO w_subject SEPARATED BY space.
it_objtxt_basis-line = w_subject.
APPEND it_objtxt_basis.
CLEAR it_objtxt_basis.
it_objtxt_basis-line = text-004.
APPEND it_objtxt_basis.
CLEAR it_objtxt_basis.
CLEAR w_tab_line.
DESCRIBE TABLE it_objtxt_basis LINES w_tab_line.
READ TABLE it_objtxt_basis INDEX w_tab_line INTO l_cline.
wa_doc_chng-doc_size =
   ( w_tab_line - 1 ) * 255 + STRLEN( l_cline ).
CLEAR it_objpack_basis-transf_bin.
it_objpack_basis-head_start = 1.
it_objpack_basis-head_num   = 0.
it_objpack_basis-body_start = 1.
it_objpack_basis-body_num   = w_tab_line.
it_objpack_basis-doc_type   = 'RAW'.
APPEND it_objpack_basis.
CLEAR it_objpack_basis.
LOOP AT w_path.
    temp1 = w_path.
    descr = w_path.
    CALL FUNCTION 'STRING_REVERSE'
      EXPORTING
        string = descr
        lang    = 'E'
      IMPORTING
        rstring = descr.
    CALL FUNCTION 'STRING_SPLIT'
      EXPORTING
        delimiter = '\'
        string    = descr
      IMPORTING
        head      = descr
        tail      = temp_data.
    CALL FUNCTION 'STRING_REVERSE'
      EXPORTING
        string = descr
        lang    = 'E'
      IMPORTING
        rstring = descr.
    CALL FUNCTION 'STRING_SPLIT'
      EXPORTING
        delimiter = '.'
        string    = descr
      IMPORTING
        head      = temp_data
        tail      = doc_type.
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        filename      = temp1
        filetype      = 'BIN'
        header_length = 0
        read_by_line = 'X'
        replacement   = '#'
      TABLES
        data_tab      = it_upload.
    DESCRIBE TABLE it_upload LINES tab_lines.
    DESCRIBE TABLE it_objbin_basis LINES lt_index.
    lt_index = lt_index + 1.
    LOOP AT it_upload.
      wa_objbin_basis-line = it_upload-line.
      APPEND wa_objbin_basis TO it_objbin_basis.
      CLEAR wa_objbin_basis.
    ENDLOOP.
    it_objpack_basis-transf_bin = 'X'.
    it_objpack_basis-head_start = 0.
    it_objpack_basis-head_num   = 0.
    it_objpack_basis-body_start = lt_index.
    it_objpack_basis-body_num   = tab_lines.
    it_objpack_basis-doc_type   = doc_type.
    it_objpack_basis-obj_descr = descr.
    it_objpack_basis-doc_size   = tab_lines * 255.
    APPEND it_objpack_basis.
    CLEAR it_objpack_basis.
ENDLOOP.
it_reclist_basis-receiver = '[email protected]'.
it_reclist_basis-rec_type = 'U'.
APPEND it_reclist_basis.
CLEAR it_reclist_basis.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      document_data              = wa_doc_chng
      put_in_outbox              = 'X'
      commit_work                = 'X'
    TABLES
      packing_list               = it_objpack_basis
      contents_txt               = it_objtxt_basis
      contents_bin               = it_objbin_basis
      receivers                  = it_reclist_basis
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      operation_no_authorization = 4
      OTHERS                     = 99.
IF sy-subrc EQ 0.
    SUBMIT rsconn01 WITH mode = 'INT' AND RETURN.
ENDIF.
ENDFORM.                    " send_list_to_basis
<b>Reward points for useful Answers</b>
Regards
Anji

How to send multiple customer statements by email using RFKORD11 program.

Hi All,
How to send multiple customer statements by email using RFKORD11 program. Is it possible?
As of now we copied the stanadard program and sending the customer statements by email, one by one.
if i execute the z program it will show the customer statement and send mail option.
if i click send mail it will send that customer statement to the corresponding customer.
then again i need to click back, it will show next customer statement and click on send mail.
Pl guide me, if any one worked on this program.
thanks in advance.
Regards,
Mahesh

Try execute the program in the background to see if that helps.

How to send multiple customer statements by email using RFKORD11

Hi All,
How to send multiple customer statements by email using RFKORD11 program.
As of now we copied the stanadard program and sending the customer statements by email, one by one.
if i execute the z program it will show the customer statement and send mail option.
if i click send mail it will send that customer statement to the corresponding customer.
then again i need to click back, it will show next customer statement and click on send mail.
Pl guide me, if any one worked on this program.
Regards,
Mahesh

Hi .
You first need to copy that program to Z and make the changes in it. Can you convert sapscript to smartform?
then you can write a logic to send mail in the loop.
to send the pdf file
https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/mailsendthroughoutputcontrols
Regards,
Madhuri
Edited by: madhuri sonawane on Jun 10, 2009 4:20 PM

How to Send Multiple Attachment by SOAP Adapter

Hi,
How to send multiple attachment by SOAP Adapter.
I am able to send single attachment but at the time of sending multiple attachment i am not able to see in SXMB_moni.
Regards,
Anurag

On the communication channel, please check the 'Do Not Use SOAP envelope' option. Also, please, add the "nosoap" attribute to the SOAP adapter caller. Check the note below for more information
#856597 FAQ: XI 3.0 / PI 7.0 / PI 7.1 SOAP Adapter
> "How does the nosoap mode work for the SOAP sender adapter?"

How to send multiple attachment s with a mail??

Hi,
How to send multiple attachments with a mail??
Situation::
In my case i have 5 internal tables populated dynamically in the report.
I want to send them in .TXT format as attachment with 1 mail.
Can anybody tell me in 'SO_NEW_DOCUMENT_ATT_SEND_API1',
how we add multiple attachmants to table objin???
thanks,
deepak

Hi Deepak,
Please find the sample code for sending mail with multiple attachment.
Report ZPAN_02M                                        *
REPORT zpan_02m                                .
*-MAIN DECLARATION----
DATA: docdata    LIKE sodocchgi1,
      objpack    LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
      objhead    LIKE solisti1   OCCURS 1 WITH HEADER LINE,
      objtxt     LIKE solisti1   OCCURS 10 WITH HEADER LINE,
      objbin     LIKE solisti1   OCCURS 10 WITH HEADER LINE,
      objhex     LIKE solix      OCCURS 10 WITH HEADER LINE,
      reclist    LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
*-OTHER DECLARATIONS----
DATA : listobject   LIKE abaplist OCCURS 1 WITH HEADER LINE.
DATA : tab_lines(3) TYPE n.
DATA : att_type     LIKE soodk-objtp.
*OBJBIN = ' | '. APPEND OBJBIN.
*---For simple attachment -
DATA : BEGIN OF wi_data OCCURS 0,
         c1(10),
         c2(10),
       END OF wi_data.
wi_data-c1 = 'Line 1'.   wi_data-c2 = 'Line 1'. APPEND wi_data.
wi_data-c1 = 'Line 2'.   wi_data-c2 = 'Line 2'. APPEND wi_data.
wi_data-c1 = 'Line 3'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 4'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 5'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 6'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 7'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 8'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 9'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 10'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 11'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 12'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 13'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 14'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 15'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 16'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 17'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 18'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 19'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 20'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 21'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 22'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 23'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 24'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 25'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 26'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
class cl_abap_char_utilities definition load.
constants:
    con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
    con_cret type c value cl_abap_char_utilities=>CR_LF,
    con_nwln type c value cl_abap_char_utilities=>NEWLINE.
LOOP AT wi_data.
CONCATENATE wi_data-c1 con_tab
              wi_data-c2
            INTO objbin.
condense objbin.
CONCATENATE con_cret objbin INTO objbin.
APPEND objbin.
ENDLOOP.
*---CREATE MESSAGE : DOCDATA -
Name
docdata-obj_name = 'TEST_ALI'.
Subject
docdata-obj_descr = 'Test including ALI/HTML Attachment'.
*---CREATE MESSAGE : BODY -
objtxt = 'Test Document.'.
APPEND objtxt.
objtxt = 'You will find an ALI/HTML attachment in this message.'.
APPEND objtxt.
objtxt = 'Have a nice day.'.
APPEND objtxt.
*-CREATE PACKING LIST-----TEXT--
objpack-head_start = 1.
DESCRIBE TABLE objtxt LINES tab_lines.
READ     TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num   = 0.
objpack-body_start = 1.
objpack-body_num   = tab_lines.
objpack-doc_type   = 'RAW'.
APPEND objpack.
*-CREATE PACKING LIST-----ATTACHMENT--
att_type = 'XLS'.
DESCRIBE TABLE objbin LINES tab_lines.
READ     TABLE objbin INDEX tab_lines.
objpack-doc_size = ( ( tab_lines / 2 ) - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num   = 0.
objpack-body_start = 1.
objpack-body_num   = tab_lines / 2.
objpack-doc_type   = att_type.
objpack-obj_name   = 'ATTACHMENT 1'.
objpack-obj_descr = 'Attached Document 1'.
APPEND objpack.
att_type = 'XLS'.
objpack-doc_size = ( ( tab_lines / 2 ) - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 14.
objpack-head_num   = 14.
objpack-body_start = 14.
objpack-body_num   = tab_lines / 2.
objpack-doc_type   = att_type.
objpack-obj_name   = 'ATTACHMENT 2'.
objpack-obj_descr = 'Attached Document 2'.
APPEND objpack.
*-CREATE RECEIVER LIST----
reclist-receiver = '[email protected]'. reclist-rec_type = 'U'.
APPEND reclist.
reclist-receiver = sy-uname.               reclist-rec_type = 'B'.
APPEND reclist.
*-SEND MESSAGE----
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
    document_data                     = docdata
    put_in_outbox                     = 'X'
    commit_work                       = 'X'
IMPORTING
SENT_TO_ALL                       =
NEW_OBJECT_ID                     =
TABLES
    packing_list                      = objpack
    object_header                     = objhead
    contents_bin                      = objbin
    contents_txt                      = objtxt
CONTENTS_HEX                      = objhex
OBJECT_PARA                       =
OBJECT_PARB                       =
    receivers                         = reclist
   EXCEPTIONS
     too_many_receivers               = 1
     document_not_sent                = 2
     document_type_not_exist          = 3
     operation_no_authorization       = 4
     parameter_error                  = 5
     x_error                          = 6
     enqueue_error                    = 7
     OTHERS                           = 8.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
              WITH output = 'X'
              AND RETURN.
Hope this is enough for you...
Enjoy SAP.
Pankaj Singh.

How to send active links in email from firefox

how to send active links in email from firefox. Works in IE but not Firefox... Is there a setting to change?
== Operating system ==
Windows 7

Check with your web mail service provider for help with that issue.

How to send multiple records in file2file and file2db or all scenarios//

I'm able to send single record for file2file and file2db,
how to send multiple records in file2file and file2db or all scenarios//
what should add or make changes for dis.

1 put Occurance 1 to Unbounded in data type of IR
2 In the test tag of message mappings in IR,select one node and use "duplicate subtree" in its context menu
After that,you can download the test data in XML format with the button "save document source"
for example:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:ZFileDemo xmlns:ns0="http://hand-china.com/mm/po_01">
- <Item>
<ItemNo>1</ItemNo>
<Matnr>2</Matnr>
<Text>3</Text>
</Item>
- <Item>
<ItemNo>4</ItemNo>
<Matnr>5</Matnr>
<Text>6</Text>
</Item>
</ns0:ZFileDemo>

How to Send the material master data from sap4.6c to ECC6.0

Hi
Friends this is shalini Shah, i got one requirement that is
how to send the materail master data from SAP 4.6C to ECC6.0 using XI.
i know the file to idoc and idoc to file scenarios but i don't know this one.
please help me friends, Thanks in advance.
Regards
Shalini Shah

Hi Shalini,
To trigger IDoc these configurations should be done in the SAP 4.6, XI and ECC 6.0.
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3 (4.6 and ECC 6.0)
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
Also go ther the Blog <a href="/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi Configuration for Pushing IDOC's from SAP to XI</a> By Swaroopa Vishwanath
U need to import the IDoc types both inbound and outbound to XI.
1. Create Inbound and Outbound Message interface.
2. Do one to one message mapping.
3. Define an Interface mapping.
ID:
1. Create 1 Sender aggrement.
2. Create 1 Receiver aggrement.
3. Define 1 RD and ID.
4. Only create an receiver IDoc CC.
Regards
San
<a href="Remember to set the thread to solved when you have received a solution to set the thread to solved when you have received a solution</a>
Where There is a <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/weblogs?blog=/weblogs/topic/16">blog</a> there is a Way.

How to send a photo via bluetooth from iphone 5s to laptop

how to send a photo via bluetooth from iphone 5s to laptop

Connectivity between an iPhone and a computer via Bluetooth is extremely limited. It supports tethering (hotspot or internet sharing) if your cellular plan allows that but does not support transfer of photos. You can import photos from the Camera Roll to the computer via USB or via wifi as described in http://support.apple.com/kb/HT4083

How to send error message to forms from Database Trigger

Hi, Please help me to send error message to forms from Database Trigger?
RgDs,
Madesh.R.M

You are correct, the On-Error trigger is a Forms trigger. However, if your Form is going to display the error generated by the database stored procedure or trigger - you might not see the database error in your Form unless you check the DBMS_ERROR_CODE in the On-Error trigger and manually display the Error Code and associated Text. I've see this happen with a co-worker. The Form she was working on was based on a table with an Before-Insert trigger. Because she was not explicitely handling the error from the Before-Insert trigger in the Forms On-Error trigger, her Form appeared to halt for no reason at all. Once she added code to the On-Error trigger in the Form to handle the DBMS_ERROR_CODE, she discovered the trigger was producing an error and was able to show the error to the user in the On-Error trigger.
I understand the desire to keep as much as possbile in the database, but with that comes some extra coding in your Forms to handle this. This extra coding could easily be placed in a Forms Library, attached to a Form and called in the On-Error trigger. Your code could look like this:
DECLARE
   /*This example assumes you have an Alert defined
      in your Form called: 'ERROR' */
   al_id    ALERT;
   al_text VARCHAR2(200); /* Max text of a Forms Alert message*/
   al_btn   NUMBER;
BEGIN
IF DBMS_ERROR_CODE != 0 THEN
   /* Error code is ORA-00000 Normal Successful completion
       So only handle non-zero errors */
   al_text := DBMS_ERROR_CODE||':'||DBMS_ERROR_TEXT;
   al_id := Find_Alert('ERROR');
   set_alert_property(al_id, alert_message_text, al_text);
   al_btn := show_alert(al_id);
END IF;
END;Your original question was "How to send error message to forms from Database Trigger?" The answer is you don't because Forms already gets the database error code and database message through the Forms DBMS_ERROR_CODE and DBMS_ERROR_TEXT functions. Look these up in the Forms help and it should clear things up for you.
Craig...
Edited by: CraigB on Jun 14, 2010 4:49 PM
Edited by: CraigB on Jun 14, 2010 4:49 PM
Edited by: CraigB on Jun 14, 2010 4:50 PM
Edited by: CraigB on Jun 14, 2010 4:51 PM
Edited by: CraigB on Jun 14, 2010 4:51 PM

How to Send Multiple Plot XY Graph from LabVIEW to Microsoft Excel

Similar Messages

Maybe you are looking for