How to send my ipad for technical assistance? He fell to the floor but still binds despite problems in the system

Here you go: http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod
Good luck!

Similar Messages

How to send trigger pulse for every 0.25 sec until user stops the task?

Hi All,
Iam using NI_DAQ PCI 6221 Card for the Data Acquisition.
Can any body please tell me how to send trigger pulse for every 0.25 sec until the user stop the task??
Please suggest me the methods I should use to meet this requirement.
Thanks In Advance,
Sindhu

Hi Sindhu,
Am I correct in thinking that you do not want to use your 6221 to output a digital pulse, but that you are getting a digital pulse from somewhere else that you want to use as a trigger for the analog input? And you will have more than one trigger? If this is the case, then it can be accomplished by doing a retriggerable operation. The way that this works is you use the counter on your board to generate the sample clock for your analog input because analog input cannot do retriggerable operations with its own sample clock. You can modify the example GenDigPulseTrainContinuous_DigStart that is in the same location as the example I referenced before to be retriggerable by using the property DAQmxSetStartTrigRetriggerable.
After doing that and testing to make sure that it works, you can setup an analog input task like the example ContAcqVoltageSamples_IntClk but specify the source of the sample clock to be the internal output of the counter you used in the counter portion of your program. If you need help with the terminal names (You will need to use Ctr0InternalOutput for example), you can reference the NI-DAQmx C Reference Help at Start >> Programs >> National Instruments >> NI-DAQ. After doing this, you will acquire the same number of samples as the number of pulses you choose to generate in the counter portion of your code every time a trigger is received.
Also, I have come across an example that does retriggerable analog input using the counter as a sample clock in C++. Either by using this example or modifying the shipping examples as I stated above you should be able to achieve what you are trying to do.
Let us know if you have any questions.
Thanks,
Laura

Please, the battery of my mac air does not last more than two hours, it's been over 30 days I sent for technical assistance and nothing! I am very disappointed with the mac air, I had a very different expectation of apples products!!

Please, the battery of my mac air does not last more than two hours, it's been over 30 days I sent for technical assistance and nothing! I am very disappointed with the mac air, I had a very different expectation of apples products!!!

Maybe the problem is not your MB Air......
Try these:
Make sure bluetooth is turned off if you're not using it.
Set your screen brightness to 4 bars.
See what's loading in your login items. Delete the ones you don't need.
Open Activity Monitor - under All Processes see what's using most of your CPU's resources.
Highlight the ones with the highest %CPU and hit quit process.
Remember that when Apple says that your battery should last 7 hours, they tested it just browsing the web and not have anything open in the background and screen is set at 50% brightness.

How to send video iPad to iPad

How to send video iPad to iPad

I'm assuming you mean how to send video files, rather than using Facetime? You can download an App called bump to transfer files, But i haven't used it to send video before, so can't comment on if it works.
There are various other Apps available which will work though. Have a look through them on the App store. Bluetooth won't work, as Apple are very touchy about how their devices are connected.

If my ipad was stolen, how to register my ipad for the stolen goods, and lock the hardware requirements?

If my ipad was stolen, how to register my ipad for the stolen goods, and lock the hardware requirements?

It's really disappointing as a newly converted Apple customer who has already had his iPad stolen, that Apple just sits back and let's this happen.
I've viewed a number of posts regarding stolen iPads. Yes, I did have the "find my iPad" enabled. That's how I knew when the iPad was gone for good. It's a useless function in the case of theft because the thieves know how to hack into your iPad. It disappeared from my list of devices in the "find my iPad" utility that very same day.
Apple loves the fact that their devices get stolen all the time! That way they sell more of them. Theft could easily be significantly reduced if Apple chose to give users a means to report stolen devices on the Apple site. They choose not to do this. If the black market for Apple devices was limited to hackers who know they have a stolen device, the items wouldn't be such a hot commodity! Apple knows this... I guess they want to get their devices into as many households as they can.... Legally or not.
So for all you hard working folks out there, find a way to make sure your Apple products are secure because if they get stolen, you're out of luck. Apple refuses to help when they could easily do so.

How to send active links in email from firefox. Works in IE but not Firefox... Is there a setting to change?

how to send active links in email from firefox. Works in IE but not Firefox... Is there a setting to change?
== This happened ==
Every time Firefox opened
== Always

Check with your web mail service provider for help with that issue.

I pull fiftyfour bytes of data from MicroProcessor's EEPROM using serial port. It works fine. I then send a request for 512 bytes and my "read" goes into loop condition, no bytes are delivered and system is lost

I pull fiftyfour bytes of data from MicroProcessor's EEPROM using serial port. It works fine. I then send a request for 512 bytes and my "read" goes into loop condition, no bytes are delivered and system is lost

Hello,
You mention that you send a string to the microprocessor that tells it how many bytes to send. Instead of requesting 512 bytes, try reading 10 times and only requesting about 50 bytes at a time.
If that doesn�t help, try directly communicating with your microprocessor through HyperTerminal. If you are not on a Windows system, please let me know. Also, if you are using an NI serial board instead of your computer�s serial port, let me know.
In Windows XP, go to Start, Programs, Accessories, Communications, and select HyperTerminal.
Enter a name for the connection and click OK.
In the next pop-up dialog, choose the COM port you are using to communicate with your device and click OK.
In the final pop
-up dialog, set the communication settings for communicating with your device.
Type the same commands you sent through LabVIEW and observe if you can receive the first 54 bytes you mention. Also observe if data is returned from your 512 byte request or if HyperTerminal just waits.
If you do not receive the 512 byte request through HyperTerminal, your microprocessor is unable to communicate with your computer at a low level. LabVIEW uses the same Windows DLLs as HyperTerminal for serial communication. Double check the instrument user manual for any additional information that may be necessary to communicate.
Please let me know the results from the above test in HyperTerminal. We can then proceed from there.
Grant M.
National Instruments

How can you sync ipad 2 photos to pc not using the cable or icloud sync?

How can you sync ipad 2 photos to pc not using the cable or icloud sync? Is there a way to do this via wi-fi network, How can you sync ipad 2 photos to pc not using the cable or icloud sync? Is there a way to do this via wi-fi network

Thanks for that, that was my first suggestion but he wants to not email either. His problem is he used his old nokia to do it and it was fine, now anything other than that he thinks is too much hassle.

I'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games.

i'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games!

I have exactly the same problem.
I'm a little peed-off with Microsoft on this. The original wireless controller I have doesn't work either since the cable I'm using is 'just' the charge and play cable, so a direct connection to my Mac won't work with this cable. It's a cable for god's sake. Why on EARTH put any limitations on this!?!?
Next I learn I need an additional USB wireless receiver from Microsoft to get my original 360 controller to talk to my Mac. As I certainly don't want to fork any more microsoft dollars on this, this is not an option.
Next I think, yes! I have a MadCatz 360 wired USB controller. This should surely do the trick just plugging it in and the way I go. But oh no, for some reason I plug my MadCatz Xbox360 controller in, it flashes a few times then switches off and can't be turned on again.
The System Profiles recognizes it as a MadCatz 360 device controller but that is about it, but the ontroller software I download for the System Prefs (360Controller, USBOverdrive etc) don't even recognize the controller as being plugged in.
What the **** Is The Microsoft Deal with all of this!?!?
PS: Oh, and I forgot to mention, there are No drivers for device 4716 that I can find on the MadCatz website, or am I going blind?
If anyone has a link, it would be appreciated.
Message was edited by: nostrawaggus

Just loaded os7 on iPad. Used to clear apps not in use but still on by double pressing on button. How do you do it now?

Just loaded ios7 on iPad. Used to clear apps not in use but still on by double clicking button. How do we do it now?

You still double-click the home button to open the multitasking bar, but instead of pressing and holding them like you did on previous iOS versions, you now swipe/drag the app's 'screen' up and off the top of the screen.

Is it possible to add additional features, such as I had in iTunes? What I mean is: how could I add comments for example of an ebook; or the publisher?

Is it possible to add additional features, such as I had in iTunes? What I mean is: how could I add comments for example of an ebook; or the publisher?

Many thanks Brett, but probably I wasn't clear enough about my problem.
I know that I'm able to include some notes, or to highlight paragraph; what I want to know if is it possible to make a summary of the book; or add additional features such as Publisher, if I read or not; language, etc. And show in the information for each book … In the application there's only: title, author, genre … How can add additional features as a reference for the ebook as a whole, and see them at the same level of the author, genre, etc.
For example
BOOK A AUTHOR BRETT L PHILOSOPHY ENGLISH TO READ iTUNES STORE
The first three items are the default items … what I want to include is the others (as an example) … And create a box or something to make a summary of the book.
Sorry for the bothering … but I was (and I suppose I'm not the only one) very comfortable with iTunes format for Music; but iBooks lost quite everything compared to iTunes; and it looks like a mere Kindle application.
Many thanks in advance
Gerardo Garcia Gorostidi

How do I find games for iPod 5.5 80GB in the iTunes Store?

How do I find games for iPod 5.5 80GB in the iTunes Store?

The german iTunes Support has informed me that I am also under the Apps matching games for my iPod 5.5 80GB.

I have two iPads. With two functioning iPads. Is it possible (on the same ID) to sync two of them differently with the same account. So I want to use the new iPad for all my current functions. The old iPad for just my music collection?

I have two iPads. With two functioning iPads. Is it possible (on the same ID) to sync two of them differently with the same account. So I want to use the new iPad for all my current functions. The old iPad for just my music collection and remove all the other stuff?

Very easily. I have an iPod touch and iPad on the same account with totally different content.
If you use iTunes, connect each iPad to your computer and open iTunes and deselect any automatic updating/syncing. If you don't sync with iTunes but have them set up independently, under the settings, App Store, turn off automatic downloads for apps, etc.
I'm old fashioned, I set up and sync my iPad and iPod to my computer and iTunes. Each device has a different name and I manage content manually and only allow sharing on what I want shared.

How to populate tax area for IT 207? what is the common practice?

Gurus,
How to populate tax area for IT 207? what is the common practice?
The residential address IT 0006 is a new your address with ZIP code 10001
PA30 for IT 207 displays 4 tax areas for the new york address.
FED     Federal     0000-0001      99999-9999
NY     State of New York             14999-9999
NY01     New York City          14999-9999
NY02     Yonkers                   14999-9999
I thought, each zip code will map to only one tax area.
Thanks,

This is the real world ! SAP does not design tax area based on zip codes. In our company, the tax lady calls the tax authorities to check what zip codes fall under that tax authorities.
and BTW, with new BSI upgrade, you will find 12 more tax authorities for NY.
Cheers !!!!
W

HT204053 I have installed the latest version of Apple but still can't see ICloud in System Preferences- how can I fix this?

I have installed the latest version of Apple but still can't see ICloud in System Preferences- how can I fix this?

Lion is required to see the iCloud Preference Pane: this is an upgrade, not an update, and has to be paid for. If you want to install Lion, go to the Mac App Store and purchase and download it there ($29.99).
First check that your Mac meets the requirements for Lion:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space

How to send my ipad for technical assistance? He fell to the floor but still binds despite problems in the system

Similar Messages

Maybe you are looking for