How to send Org data from sender system thorugh ALE inbound switch
Hi All,
Could anyone please provide some input for sending the Org Data through ALE inbound switches.
The requirement is to make changes in the distribution model BD64 so that the org data will not be passed in the filter criteria. And when we execute PFAL then the Org data should flow directly to the receiver system through ALE switches.
Thanks in Advance.
Hi,
So first you need to set your distribution model in BD64 (create model views and add message type). Please refer to note 312090 to set your filter settings. After this definition, we have to distribute the source system into the target system (Edit > Model view> distribute). In the target system, we have to generate partner profiles (environment> generate partner profiles).
So you have to create Partner profiles (transaction WE20). The best way is to define for outbound and inbound parameters into source system and target system with message type HRMD_A.
In the source system, we have two options :
-Transfer IDOC immediately
-Collect idocs
In the target system, you have also two options:
-Trigger by background programu2026 means that once datas are distributed, we have to run RBDAPP01 to process them.
-Trigger immediately (do not have to run any program)
Then after setting this distribution model, please review the way to distribute HR datas :
1- Using transaction PFAL, sending the objects C, O, S successively in Update mode with the infotypes 1000, 1002 and 1028 only, without using evaluation paths (all existing objects).
=> The objects will then be created without relationship, and no error must be reported.
2- Using transaction PFAL, sending the object P in Update mode.
=> As the structure objects are already present, no error message must be generated. If some are, please analyse them, and correct them before the next step.
3- Using transaction PFAL, sending the objects C, O, S successively in Update mode (without restrictions, or only the infotype 1001).
=> The relationships which were not sent in step 1 are then distributed.
4- The changes pointers can now be activated and processed, as the initialization has been done (steps 1 to 3).
Please also check note 550055 for further information,
Hope it helps,
Kind Regards
Christine
Similar Messages
-
How to upload Transaction data from source system to BI 7.0
Dear friends,
I want to know how to upload Transaction data from source system to BI 7.0.
if anybody having step by step material for this process ,please send it to my
mail id.
[email protected]
[email protected]
Thanks,
D.prabhuHi,
it works in the same way as before in case you are not using the new features like the dtp and the transformations. Using the new features, you schedule a infopackage to load the data up to psa and schedule a dtp to post the data to the targets.
regards
Siggi
PS: We want to share knowledge in sdn and not keeping it private by having the information sent to our email adresses. -
How to take the data from sage system to sap r/3
hi expects,
how to take the data from sage system to sap r/3? which adapter is to be used?what is the format of data in sage system?how the scenarios will work ? please help me in solving this problem?hi rohit,
the data transfer can be done by using SOAP adapter
do chk this link
http://www.sage.org/lists/sage-members-archive/2001/msg01718.html
http://www.sage.org/lists/sage-members-archive/2001/msg01739.html
thanx
Sampath -
How to upload the data from legacy system database to SAP data base
Hi.
We are doing analysis of Legacy system and which needs to be converted to SAP system i.e. SAP implementation.
I just want to know , how we migrate the existing whole data( from legacy system) into SAP system.
and which method is the best method to use data migration from legacy to SAP system if data legacy data amount is huge.
Please suggest me.
Thanks.Hi
We can either use the BDC or BAPI or LSMW or Direct Input techiniques for the data transfers.
The combination of both Session and Call transaction can be used to achieve this that includes the error handling also. This invloves the screen interaction.
These days, BAPIs are used to overvome some upgrade problems. For easy upgradation, we cna go for BAPIs. Here ther is no screen intercation.
LSMW mainly used for master data transfers using some standrad programs.
As per your client or company desicions we can choose any of them.
Please refer to these links for more understanding -
BDC Vs LSMW -
BDC VS LSMW
BDC Vs BAPI -
BDC VS LSMW
Thanks & Regards,
Chandralekha. -
How to transfer Cats data from legacy system to SAP System
Hi,
I need to export data to CATS from Legacy system.What is the procedure for that?
How do I define field?
Please help it is urgent.
Thanks,
KavitaHi Kavita,
Check the link below.
http://sap-img.com/sap-data-migration.htm
Reward points if it helps.
Regards
Karan -
How to send data from HR system to PI system
Hi All,
I need to write a program that pulls the data from HR system and pushes it to PI system.I pretty much have the logic to pull the HR data but I would like to know the steps involved in pusing the data to PI system and how much time does it take approximately
Thanks
Bala DuvvuriHi Bala,
Proxies are used to send data to the PI system.
Hence you will have to create ABAP Proxies which will extract the data and send it to the PI System.
Regards,
Samreen. -
How to get data from CRM systems?
Hi...
How to use adapters to get data from external systems such as CRM systems.It is totally depends what kind of message is or are coming out from CRM Systems.
If it is sending IDoc then use Idoc adapter.
If it is BSP and sending HTTP Post then use HTTP adapter.
If you are using proxy then use XI adapter.
thanks
farooq -
How to extract Inventory data from SAP R/3 system
Hi friends How to extract Inventory data from SAP R/3 system? What are report we may expect from the Inventory?
Hi,
Inventory management
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how%20to%20handle%20inventory%20management%20scenarios.pdf
How to Handle Inventory Management Scenarios in BW (NW2004)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Loading of Cube
ref.to page 18 in "Upgrade and Migration Aspects for BI in SAP NetWeaver 2004s" paper
http://www.sapfinug.fi/downloads/2007/bi02/BI_upgrade_migration.pdf
Non-Cumulative Values / Stock Handling
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
Non-Cumulatives
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62ebe07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/frameset.htm
Here you will find all the Inventory Management BI Contents:
http://help.sap.com/saphelp_nw70/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
2LIS_03_BX- Initial Stock/Material stock
2LIS_03_BF - Material movements
2LIS_03_UM - Revaluations/Find the price of the stock
The first DataSource (2LIS_03_BX) is used to extract an opening stock balance on a
detailed level (material, plant, storage location and so on). At this moment, the opening
stock is the operative stock in the source system. "At this moment" is the point in time at
which the statistical setup ran for DataSource 2LIS_03_BX. (This is because no
documents are to be posted during this run and so the stock does not change during this
run, as we will see below). It is not possible to choose a key date freely.
The second DataSource (2LIS_03_BF) is used to extract the material movements into
the BW system. This DataSource provides the data as material documents (MCMSEG
structure).
The third of the above DataSources (2LIS_03_UM) contains data from valuated
revaluations in Financial Accounting (document BSEG). This data is required to update
valuated stock changes for the calculated stock balance in the BW. This information is
not required in many situations as it is often only the quantities that are of importance.
This DataSource only describes financial accounting processes, not logistical ones. In
other words, only the stock value is changed here, no changes are made to the
quantities. Everything that is subsequently mentioned here about the upload sequence
and compression regarding DataSource 2LIS_03_BF also applies to this DataSource.
This means a detailed description is not required for the revaluation DataSource.
http://help.sap.com/saphelp_bw32/helpdata/en/05/c69480c357354a8846cc61f7b6e085/content.htm
http://help.sap.com/saphelp_bw33/helpdata/en/ed/16c29a27db6e4d81a015be8673eb80/content.htm
These are the standard data sources used for Inventory extraction.
Hope this helps.
Thanks,
JituK -
How to transfer data from one system to another by datamart please give de
how to transfer data from one system to another by datamart please give details
Hi Deba,
Find the below SAP help doc which may help u...
http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/frameset.htm
Also find the below threads...
Loading data from one cube to another cube.
data copy from infocube to infocube in two different BW systems
Delta when loading from ODS to ODS
reg datamart
Data mart flag
Regards,
KK. -
How to load master data from SAP R/3 system like Customer master, materioal master , vendor master.............
Hi Bramha,
Check ...........
Re: master data loading in BI 7.0
/message/4708129#4708129 [original link is broken]
Re: Master data loading.
Regards,
Vijay. -
How to get the current Date from the system?
How do I acquire the current date from the system? Also, if possible, can I assign the day, month and year separately into three variables and how? It would be thankful if some simple Example could be given. Thanx!
import java.util.*;
public class count {
public count() {
Calendar now = Calendar.getInstance();
int month = now.get(Calendar.MONTH);
int day = now.get(Calendar.DAY_OF_MONTH);
int dayyear = now.get(Calendar.DAY_OF_YEAR);
int year = now.get(Calendar.YEAR);
int a = 365;
int b = a - dayyear;
System.out.println("The day is the" + " " + day);
System.out.println("IT is the" + " " + month + " " + "month of the year");
System.out.println("The year is" + " " + year);
System.out.println("This many days till next year" + " " + b);
public static void main(String[] args) {
count cou = new count();
} -
How to extract data from legacy system to source file
Hi can anyone tell me the procedute to copy data from legacy system to source files....this data needs to be moved to base tables
can any one tell me the procedure and any sample code i,e any example
Thanks & Regards
KrishYou should post your thread to ...:
http://forums.oracle.com/forums/forum.jspa?forumID=183
providing all necessary info......!!!!
Greetings...
Sim -
How can i get data from the other system?
hi,
i want get some data from the other r3 system in my r3 system? now this two r3 system are installed two server.Hi,
U can achieve this by RFC function module...
create a function module and make it as REMOTE ENEBLED IN ATTRIBUTES TAB..
for example i have to r/3 systems as A and B.
I want to get data from B system..
so create the FM in B system and then in A SYSTEM u have to call that one ,like this....
DESTINATION NAME IS FOR SYSTEM B.
CALL FUNCTION 'ZRFC' DESTINATION <DESTINATION NAME>
EXPORTING
IMPORTING
TABLES..
Regards,
Nagaraj -
How to get purchasing data from SAP R/3 to OWB (Oracle warehouse builder).
Hi,
My name is Pavan Tata. I work as a SAP BW developer. Here is the situation at my client place. Client decided to retire BW system and wants to replace with OWB(Oracle warehouse). In all this currently we have purhchasing application in BW production system and wants to move this application to OWB for the same type of reporting what they are getting currently.
Here is my question:
How to get purchasing data from SAP R/3 to OWB(Warehouse) with initial full loads and deltas mechanism in the same way as we do in BW.
Please help on this, also send me any documentation about this if you have.
Thanks,
Pavan.Hello,
here is a short report which converts S012 entries to strings with separator semicolon. Perhaps this will help you?
Regards
Walter Habich
REPORT habitest2 LINE-SIZE 255.
TYPES:
strtab_t TYPE TABLE OF string.
CONSTANTS:
separator VALUE ';'.
DATA:
it_s012 LIKE s012 OCCURS 0,
wa_s012 LIKE s012,
strtab TYPE strtab_t,
strele TYPE string.
SELECT * FROM s012 INTO TABLE it_s012 UP TO 100 ROWS.
PERFORM data_to_string
TABLES
strtab
USING
'S012'. "requires it_s012 and wa_s012
LOOP AT strtab INTO strele.
WRITE: / strele.
ENDLOOP.
*& Form data_to_string
FORM data_to_string TABLES strtab TYPE strtab_t
USING ittab TYPE any.
DATA:
h_zaehler TYPE i,
line_str TYPE string,
l_tabellenname(10) TYPE c,
l_arbeitsbereichsname(10) TYPE c,
h_string TYPE string,
h_char(255) TYPE c.
FIELD-SYMBOLS: <l_tabelle> TYPE ANY TABLE,
<l_arbeits> TYPE ANY,
<feldzeiger> TYPE ANY.
CLEAR strtab.
CONCATENATE 'IT_' ittab INTO l_tabellenname.
ASSIGN (l_tabellenname) TO <l_tabelle>.
CONCATENATE 'WA_' ittab INTO l_arbeitsbereichsname.
ASSIGN (l_arbeitsbereichsname) TO <l_arbeits>.
LOOP AT <l_tabelle> INTO <l_arbeits>.
CLEAR: h_zaehler, line_str.
line_str = ittab.
DO.
ADD 1 TO h_zaehler.
ASSIGN COMPONENT h_zaehler OF
STRUCTURE <l_arbeits> TO <feldzeiger>.
IF sy-subrc <> 0. EXIT. ENDIF.
WRITE <feldzeiger> TO h_char LEFT-JUSTIFIED. "#EC *
h_string = h_char.
CONCATENATE line_str separator h_string INTO line_str.
ENDDO.
APPEND line_str TO strtab.
ENDLOOP.
ENDFORM. "data_to_string -
Transfer Data from SAP system to non-SAP system
Hi all,
I want to send material no, site and price data from SAP system to non-SAP system. Would you tell me how can I do it
Thanks
Arif
Moderator message: please do more research before asking, show what you have done yourself when asking.
Edited by: Thomas Zloch on Oct 16, 2011 10:38 PMHi,
you can create the same...
but normal practice what we do is create swc for each system so that it is easy to maintain and easy to extend in the future..
or else follow some conventions if you are just starting the things..
HTH
Rajesh
Maybe you are looking for
-
Function Module to open a new session displaying a method of a class
Hello All, I have a method A of class B. Now, in my current session, I have a button. When the user clicks on this button, what I expect is that a new session be opened and in the new session method A of class B be displayed. This is similar to the d
-
Calling reports 6i from Forms 9i
Hi All, I am updating a menu application that we run from 6i to 9i. The menu app form is a list of reports. The runtime path for each report is returned to menu_link_all.path.th Works great in 6i form and reports however, I can not figure out how to
-
I dropped my iphone 4 and it shut off and when i tried to cut it on it wouldnt. so i connected it to a power source and it tunred on but stay stucked on the apple logo. so when i discounted it shut off. it only turns on when connected to a power sour
-
Applying rman backuppieces to stanby database
Hello, I have an standby database 10g, which is feeded by archive logs sent from primary. A lot of archive logs were missed for ever, so standby needs to be recovered. For that, I applied rman incremental backups. Those rman backuppieces were generat
-
ITunes 10's "grid view" displays my songs out of order.
I really enjoy the "grid view" option on iTunes 10. However, I have noticed it has displayed a few of my albums in the incorrect order. I have checked the tags, and they are all set to the same artist, album, album artist, genre, album artwork, amoun