How to send PO IDOC from SRM server

Hi All,
How to send IDOC, after successful creation of the PO in SRM ?
Please tell me how to configure the SRM system ?
Regards

Hi,
See the foll related useful link:
Re: Intercompany process u0096 MM u0096 SD
BR,
Disha.
Pls reward points for useful answers.

Similar Messages

How to send an iDoc from XI to flat file

hi,
I have send an IDoc from R/3 to XI.The iDoc is being received by XI.Now,I need to send this iDoc to Flat file.
For this,What i need to do?
can any body help me step by step in this regard..........
Thanx in advance..
Sridhar Raju Mahali

Hi Sridhar,
Hope you are clear with the XI portion.
Now for sending the data from IDOC to XI follow these steps...
1.create an RFC destination pointing to XI server in the Business System where IDOC is present, using transaction sm59
2.create a tRFC port in the same Business System using transaction we21
3.create a logical system name using transaction bd54
4.then create a partner profile using transaction we20
5.Now log on to the Business System where IDOC is created.
6.go to we19..execute the idoc and give standard outbound processing on
7.on the values given click and give the sender and recipeint port and partner name and type..
Hope this will help you...
Regards
Suraj

How to send multiple idocs from WE19?

How to send 100 IDocs at a time using We19?
in other words, can we generate 100 IDocs from a single Idoc using We19
Thanks,
Ven

Hi Venkat,
Check program RSEOUT00.
Hope this helps.
Regards
Lakshman

How to send communication message from application server to load balancer

Hi,
Environment: 8 application servers are clustered behind a load balancer. Java/J2EE based client-server application
When any one of the servers is supposed to go down, I want to send a message from that server, programmatically, to load balancer something which signifies "server is down or going down, do not forward any client connections to me". This is to avoid any CLOSE_WAITs.
How do I achieve this? How can I send message programmatically from app server to load balancer? From very basic knowledge, SNMP can be used for this. But do not know how to start of. Any other means is also OK. Need details.
Thanks
Sunil

At the same time we stop accepting any new connections [ServerSocket.accept() will be escaped during server shutdown].Just close the ServerSocket.
Both these are working fine. But during the 25 seconds, still the client connections gets queued up trying to find that serverNot if you close the ServerSocket.
reason being the load balancer is still forwarding requests to this server whose shutdown has started but not completed. So CLOSE_WAITS happen.Not if you close the ServerSocket. Not that the CLOSE_WAITS are the actual problem, as they will all disappear when the server exits. It's more that the clients shouldn't have been able to create the connection in the first place. Which wouldn't have happened if you had closed the ServerSocket.
If we tell load balancer not to send any more client socket connections, then we completely avoid getting CLOSE_WAITS.If you close the ServerSocket ditto.

SCOT - How to send a mail from mail server to a SAP system

Dear SAP colleagues,
With SCOT you can configure the SAPConnect administration.
You can easily configure your SAP system to allow the send of email from SAP to your mail server.
Exemple :
1. SID SAP : DL1
2. Mail server : sn1exch.lec.local
3. Target email : "myeamailaddress"
Send email process 01 : 1. DL1 ==> 2. Mail Server ==> 3. You read your email in your inbox "myeamailaddress"
My problem :
From my inbox "myeamailaddress", I want to be able to send email to SAP (Dl1).
Send email process 02 : 1. My inbox "myeamailaddress" ==> 2. Mail Server ==> 3. SAP (DL1).
Question :
Do you have any help to configure it ?
Thanks in advance for your input.
Best regards
NetWeavAdmin

Dear Olivier,
I do not have a specifi technical problem.
Let's summarize - my request concerns a SRM Workflow :
I am ordering an article. When the order is higher than 2'000 USD, I need to get the approval of my manager.
That's the workflow.
Workflow :
1. I am user in DL1 SAP System.
    UserName : CharlesN
    In SU01,
    charles(a)green.com
2. From DL1 SAP system, I order articles. The order total amount is higher than 2'000 USD.
    In the workflow, an mail from DL1 is automatically send to my manager in his MS-Outook inbox.
    (manager(a)green.com)
3. My manager reads the mail I have sent him and give his approvals by clicking on a approvals button.
    When clicking the button, an mail must be automatically send from my manager MS-Outlook inbox
    to DL1 to CharlesN inbox in SBWP in DL1 SAP system.
I have configured SCOT and read OSS Note 455140.
The SAPconnect virtual host is activated in DL1 (SICF).
I think a miss a step in our mail server to relay a mail from MS-Outlook to my SAP system.
Any suggestion is welcome.
Best regards

How to send SAML response from ADFS server on web page

Hi
I have integarted ADFS and Orcale application for single sign on.
problem description: need SAML token on web page which published on application.
please tell me; how to set SAML response on web page defined on ADFS or what configuration required from ADFS side to send SAML response.
Regards
Kapil

This has a web app that will display claims. You could probably modify it for your needs.
http://blogs.technet.com/b/askpfeplat/archive/2013/12/23/how-to-build-your-adfs-lab-on-server-2012-part2-web-sso.aspx
Mark Morowczynski
Microsoft Senior Platforms PFE
Blog:
http://blogs.technet.com/b/askpfeplat Twitter:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

How to send the file in *application server* as an email?

Hi,
I have a file in application server and I want to send that file as an email from application server.
Please let me know how to do it.

Hi Suman,
look here:
Re: How to send an email from Application server?
Regards, Dieter

How to send an IDoc

Hi all,
I am doing a test Idoc to File interface. Can anybody tell me how to send an Idoc from R/3? I am trying to send using we19 transaction.
I am selecting basic type and after giving appropriate values, i am clicking on Standard outbound processing button. Now i am getting an error saying: "Port " does not exist in the table of port descriptions." I tried to mention the port and partner profile information in Idoc->Edit control record. But it is still giving the same error.
Can anybody help me with this?
Thanks in advance,
Divija.

Divija,
The sener port will be r3's port and receiver port will be XI's port.
In partener prolfile, as you are sending the IDOC from the r3 to XI, the entry will be as an outbound paramter.
Logically, this is how it works, for the R3 , the partner is XI and it is sending it to XI and so, an entry is made in the Outbound side for the same.
Regards,
Bhavesh

How to send vendor IDOC data from SAP R/3 to XI.

Hi experts,
I have developed the IDOC to FILE scenario for Vendor Master Upload. I want to place flat file in local folder with in XI or Outside of XI. (Using NFS or FTP protocol in FILE adapter). My First quesstion is How to setup Folder with in XI ro Out side XI?
And also I want to push the IDOC from SAP r/3 to test the scenario. Both XI and R/3 systems are configured to exchange data.
How to Push Vendor IDOC from SAP R/3 to XI? (we can send XML directly to XI; but the R/3 kernal should be moe than 6.20).
Thanks in Advance.....

Hi,
>>My First quesstion is How to setup Folder with in XI ro Out side XI?
Its a normal way to creation of folders in Os level . u can create the folder in XI Server or on the FTP Server.
ALE Settings
Steps
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
In SLD System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
In Transaction SALE
Define and Assign the logical system name.
IDoc-XI-File scenario
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
Posting the IDOC from R/3 to XI
/people/sameer.shadab/blog/2005/07/25/reposting-idocs-instead-of-recreating--for-testing-purpose-xi
REgards
Seshagiri

How to send a file from FTP to external server

My requirement is to send a file from FTP to D3(External) server.
Now I am able to store the file in Appln server.
I want to send the file created by the program thru FTP to D3 server.
I know the username,Password,HostID,RFC destination details.
How to send the file from FTP to D3.
If u have any program,Plz send it...
I dont want the function modules name...I want the example code ....
Thanks in advance.

Hi Sumi,
You could do it so that you create a .bat or .cmd script to your server which does your ftp transfer.
To do this you must use sm69 to create a external operating system command which you can call from FM SXPG_COMMAND_EXECUTE. To SXPG_COMMAND_EXECUTE you the file you need to transfer as a parameter.
What happens is that your abap program passes the file to windows batch script (.bat .cmd) which will then do the transfer for you.
Here's a sample of ftp-script for windows:
echo open IP_ADDRESS_TO_YOUR_SERVER > c:zftp_transfer.ftp
echo USERNAME>> c:zftp_transfer.ftp
echo PASSWORD>> c:zftp_transfer.ftp
echo put YOUR_FILE>> c:zftp_transfer.ftp
echo quit>> c:zftp_transfer.ftp
ftp -s:c:zftp_transfer.ftp
also take a look here for more details:
http://support.microsoft.com/?kbid=96269
Ok, this might be a bit trivial but if your server is unix/aix etc.. Instead of using batch script you must do a shell script.
Regards,
Ville

Error to send a IDOC from ECC to SUS

Hi,
I am trying to connect to SAP SUS System using HTTP adapter using PI 7.0.The scenario is
ECC ->PI->SAP SRM. I have configured HTTP adapter as the receiver with addressing type as HTTP Destination. I have created a RFC destination of type H pointing to SAP SUS on PI. I have encountered the following error after executing the scenario.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>Error during parsing of SOAP header</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>HTTP server code 500 reason Internal Server Error explanation Error during parsing of SOAP header</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have configured HTTP receiver with Addressing type HTTP Destination and configured the HTTP destination field with RFC destination(Connection Type H) created on PI. Here my source and target structures are same i.e DELVRY03. I have triggered DELVRY03 idoc from ECC and i am expecting same xml to be sent to SAP SUS but stuck up with the above mentioned error.
Someone know how fix this problem?
Tks,
Erik

HI,
As per my understanding to your scenario, You want to send one IDoc from ECC to SAP SUS system using SAP PI.
So i hope you must have configured on all the steps required to Send one IDoc to PI syste, Secondly, are you using any Standard interface in PI to send data to SAP SUS system? If yes, you need to create an HTTP Destination for that system and then you have to create XI Receiver Adapter with that HTTP destination to post incoming message to SAP SUS system.
Your error suggests you are using Plain HTTP adapter to post data to SAP SUS, which is in my understanding is incorrect.
Regards
Aashish Sinha
Edited by: Aashish Sinha on Feb 21, 2011 9:15 AM

How to send application acknowledgement from R/3 system

Hi guys,
How to send application acknowledgement from R/3 system. Ex. we have post one IDoc and check user validations. Suppose date is wrong that means indicate earlier or wrong date but date format is correct. In this situation we need send one acknowledment to sender.
How to find the solution? pls tell anyone.
Regards
Vijay

Hi Vijay,
Plz do perform the following steps:
1) In the Integration Server, call transaction SE38
2) Run program IDX_ALEREQUEST to process IDocs with message type ALEAUD as XI request
message.
3) Now Enter Sender Port, Sender Client,Partner Number, Partner Type, and Partner Rol
4) In Integration Directory, configure the routing of interface
5) Call transaction SXMB_MONI to display the XI message.
Also,
Further in IDX5 as well you will find entry for IDoc ALEAUD.ALEAUD01
Please go through the link
1)Succesful IDOC acknowledgements from ECC
2)https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb
3)https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
After you triggered the IDoc by e.g. tcode: WPMA and IDoc reached FILE system, FILE receiver CC actually is only able to send acknowledgment types SystemErrorAck and AckNotSupported.
This is because:
- IDoc sender adapter requests the following acknowledgments:
SystemAckRequested="false"
SystemErrorAckRequested="true"
ApplicationAckRequested="true"
ApplicationErrorAckRequested="true"
- File receiver adapter that run on the Adapter Engine support system acknowledgments and system error acknowledgments if they are requested by the sender. These acknowledgments are triggered when a message is successfully processed by the adapter or if an error occurs while it is being processed.
If you havent suppressed acknowledgments for IDocs WP_PLU in IDX_NOALE in XI then you will get:
SystemErrorAck when message has not reached the FILE system
AckNotSupported for all others acknowledgement types
QQ) Will this IDOC Ack applicable for this scenario???
Rather not, since FILE adapter does not support any other acknowledgements then system and IDoc adapter does not request other acknowledgements then application + SystemErrorAckRequested.
In sender system your IDoc will be always in status 39 (instead of 03), when acknowledgement is turned on.
This is because:
For SystemErrorAck the corresponding ALEAUD status is 56
For AckNotSupported the corresponding ALEAUD status is 50
Both inbound 56 and 50 statuses end up in 39 for your outbound IDoc in sender system.
Q1) Will this ALEAUD Idoc contains any Message from File System????
In both cases, it will result in status 39 - IDoc is in the target system. So it does not matter.
Q2) Basically what Information will contain this IDOC Ack.
Idoc number from sender system and status 56 or 50 depends on acknowledgement type.
Q3) Do we receive any Info from the Target File System , if we implement this Ack concept??
Nothing useful.
Remember that File Receiver has no way to determine if the written file has been correctly processed by the back-end application. However, if your FILE application can read your WP_PLU message and after successful processing is able to generate any kind of message then you can acknowledge the communications but you will not be able to link original message with the acknowledgement request message.
To do that you need to configure just normal scenario (that will be your new acknowledgement scenario) FILE -> XI -> R/3. Your FILE service will send ALEUAUD Idoc to R/3 system. Your FILE application must take care to generate proper ALEAUD XML message. In order to treat ALEAUD as a request message (not standard acknowledgement) you need to run IDX_ALEREQUEST in SE38 on XI.
Q1) It means if the Idoc not reached to Target File system means we can able to get the System Error Ack to Sender SAP R/3 System. Am i Right????
Supposed you have turned off acks on XI (tcode: se38, IDX_NOALE) for your sender port/client:
You have sent the IDoc and the last status is "03 - Data passed to port OK"
You don't know whether it was even delivered to XI ...
Supposed you have turned on acks on XI (tcode: se38, IDX_NOALE) for your sender port/client.
1)
You send and IDoc and it has been delivered successfully to FILE system.
Adapter Engine creates acknowledgement type: AckNotSupported
In XI you can see Ack Status: AckRequestNotSupported (Acknowledgement not possible). Category: permanent.
XI will send ALEAUD IDoc to R/3 system: status "50 - IDoc is added"
The IDoc status in sender will be "39 - IDoc is in receiving system (ALE service)".
2)
You send and IDoc and it has not been delivered successfully to FILE system. e.g. FILE server is down.
Adapter Engine creates acknowledgement type: SystemErrorAck
In XI you can see Ack Status: Error (Acknowledgement contains system errors). Category: transient.
XI will send ALEAUD IDoc to R/3 system: status "56 - IDoc with errors is added"
The IDoc status in sender will be "39 - IDoc is in receiving system (ALE service)".
So status 39 means only that IDoc reached XI, but you don't know whether it was delivered to FILE system or not.
Q2) And one more thing is Even though we are dealing with the IDOCFile OR FileIDOC we can able to get the ACk of Type System Error Ack only. Am I Right?????
No, "Sender adapters of the Adapter Engine do not request any acknowledgements."
Q3) So the same case( Which we disscused for IDOCFile) is Applicable for FileIDOC also????
No.
Can we able to get the System Error Ack, if the File is not reached to SAP R/3( Target here)
No.
Q4) If Yes to Q3 means,Where this System Error Ack will be seen in File System side???
Do we need to do any extra settings to receive these System Error Ack at File system side??
Not relevant.
Regards,
Vinod.

How to Trigger an IDOC from SAP R/3 to two systems at a time

Hi experts,
Can any one please tell me How to Trigger an IDOC from SAP R/3 to two XI systems at a time.
My current production R/3 system sends a DELVRY03 IDOC to Production XI system ( Name : XIP) .
I would like to route the same IDOC from production R/3 system to my Quality XI System ( Name XIQ) .
Problem is production R/3 system triggers an IDOC once. We need to write a logic to route the same to two different systems
Can any one tell me how can we do that ?
Regards
Ram.

Hello Ram,
Do you have connectivity between your production & XIQ?
What does "connectivity" mean?
1. RFC destination is maintained.
2. Port defined for the RFC destination.
If no, create these. (Search in SDN for details).
If yes, proceed:
1. Define the logical system for XIQ.(BD54)
2. Define the same as your partner profile. (WE20). Add the message type SYNCH with the port for XIQ.(This is imp)
3. Create a distribution model view with sender as "your production" & receiver as XIQ.
3.1. Add the messages which you want to distribute.
3.2 Generate Partner profiles.
No coding is reqd. for this.
BR,
Suhas

How to Trigger an IDOC from SAP R/3 to two XI systems

Hi experts,
Can any one please tell me How to Trigger an IDOC from SAP R/3 to two XI systems at a time.
My current production R/3 system sends a DELCERY01 IDOC to Production XI system ( Name : XIP) .
I would like to route the same IDOC from production R/3 system to my Quality XI System ( Name XIQ) .
Problem is production R/3 system triggers an IDOC once.
Regards
Ram.

Hi Ravi,
Thank you very much for your answer.
As I am not completely aware of R/3 side,I am getting little problem in understanding your answer.
Could you please explain the same in some what beter way.. Thank you ..

How to create Inbound Idoc from XML file-Need help urgently

Hi,
can any one tell how to create inbound Idoc from XML file.
we have xml file in application server Ex. /usr/INT/SMS/PAYTEXT.xml' we want to generate inbound idoc from this file.we are successfully able to generate outbound XML file from outbound Idoc by using the XML port. But not able to generate idoc from XML file by using we19 or we16.
Please let me know the process to trigger inbound Idoc with out using XI and any other components.
Thanks in advance
Dora Reddy

Hi .. Did either of you get a result on this?
My question is the same really .. I am testing with WE19 and it seems SAP cannot accept an XML inbound file as standard.
I see lots of mention of using a Function Module.
Am I correct in saying therefore that ABAP development is required to create a program to run the FM and process the idoc?
Or is there something tht can be done with Standard SAP?
Thanks
Lee

How to send PO IDOC from SRM server

Similar Messages

Maybe you are looking for