How to send reply to the sender of a multicast messg

Hii all,
I have a problem in sending reply to the sender of a multicast message. My problem is that, a process sends a request to all the peer processes in a multicast group and the receivers have to send a reply to this request and the reply should be sent only to the sender of the multicast message. It would be of great help for me to get a solution for this.
Thank you,
regards,
DIvya

The incoming datagram contains its originating address.

Similar Messages

HT3529 I receive messages on my iPad, but I cannot send a reply. The send button will not respond to my touch.

I receive messages on my iPad, but I cannot send a reply. The send button will not respond to my touch.

It's not that you can't use the subject field, but it is very unreliable when I try to use it. Sometimes the message send button will work and sometimes it won't.
But the biggest reason to turn it off is so that you do not accidentally type your message in the subject field. You can type a subject in that field, but you still have to type the actual message in the space below the subject field.

On my itouch 4th gen, I use imessage and message many people, but sometimes when i send a message the send bar on top will go almost all the way and stop. This will happen for some time and then work later. is there anything to avoid the freezinginsending

On my itouch 4th gen, I use imessage and message many people, but sometimes when i send a message the send bar on top will go almost all the way and stop. This will happen for some time and then work later. is there anything to avoid the freezing problem while it sends

See:
iOS: Troubleshooting Messages
However, I suspect it is just a tempery network problem beyond your control

I can receive iMessages, but can not send any as the "Send" button is missing

I can receive iMessages on my iMac Pro, but can not send any as the "Send" button is missing. Using Mountain Lion OS

Hi Ralph (US)
Works across most iChat versions as well.
Greats for paragraphs.
(UK)
10:08 PM Thursday; February 14, 2013
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

IPhone 6 is unable to send email because the sender address was rejected by the server

When I try to send emails from my Microsoft Outlook for Mac, I get a message that says "Unable to Send Email. A copy has been placed in your Outbox. The sender address was rejected by the server." I've checked all the settings (it is a POP account). I've deleted and re-installed. Any suggestions??

Please see this article on setting up an email account using the shaw mail server.
https://community.shaw.ca/docs/DOC-2181
Good luck Friend.

I am in New Zealand and when I type up a rather long email to send back home, the send button does not light up by the time I finish and I cannot send the email and can't seem to save the message or anything and then as soon as I touch a button, poof, gon

Can anyone tell me why when I type a very long email, the send button is not highlighted anymore when I am done and I can't send the message? And I can't seem to save the message or anything and as soon as I touch a button, I lose the whole thing. Any suggestions?

Have you tried typing and saving using Notes or word processing Apps before sending message?

When right clicking to send a link , the` send link` option does not appear as n option on the menu list.

the ``send link`` option just disappeared..It happened immediately after an automatic update to firefox when my computer has to be restarted about a month ago.
sometimes a ``copy link location`` will be on the list...and that will allow me to send on a link..but normally now it rarely appears and send link has disappeared entirely from the right clicked menu box.

hello bblauman, mozilla does clean up the interface of the browser from time to time - a user study has shown that this context menu entry is only used by a small fraction of the users. however, in case you miss this functionality you could use an addon to recover it: https://addons.mozilla.org/firefox/addon/send-link-in-context-menu/

Cannot send e-mail - "The sender address invalid" error message

Today I keep getting this error message "The sender address is invalid - when i try to send e-mail. I checked my settings and they are the same as always - my e-mail address hasn't changed; the outgoing and incoming server information is the same. I went through the Troubleshooting steps and still nothing. Also it's taking a really long time to connect to check for incoming e-mails. Any clues on why this is happening or what I should try next? The e-mail is via Roadrunner does that matter (althoug it didn't a couple of days ago)

This message means that your outgoing email server is not letting you connect to send email. Maybe RR changed their policy. You should be able to send using home WiFi, but when using 3G RR will not allow connections from outside their network.
One easy way around this, is to use the built-in AT&T SMTP server for outgoing email.
Or, check the RR FAQs and see if they allow an authenticated account to send email - maybe you just need to add SSL and username/pwd on the RR outgoing email server settings.
BTW - this is asked almost daily - the "Search Discussions" box to your right would have given you many hits with the same answer.

IPhone 3G Cannot Send Mail. The sender address was invalid.

All of a sudden, I cannot send mail. I get the message "Cannot Send Mail" The sender address was invalid.
I have reset the phone in hopes of resolving the problem. That did not work.
The mail that I'm sending to IS a valid address; I'm trying to RESPOND.
Please help.

The configuration and use of any outgoing server address (SMTP) may not be supported due to several factors including, but not limited to, the inability for the outgoing server (SMTP) to authenticate users (whether by IP or username/password) that are not directly connected to that Internet Service Providers(ISPs) network.
This is usually your HOME wi-fi and you are not connected to it because you are on your iPhone away from the house. This is mainly done to prevent unsolicited users from sending SPAM via the ISP's servers.
An alternative is to use ATT SMTP Server (for US) when you are on the 3G or data network for the carrier and not on your home wi-fi. So enable ATT SMTP server under Other SMTP servers under your Mail's account settings on the iPhone.
If you are interested you can obtain that information directly from the email provider. This article has a great temple that you can use to ask all necessary information from the provider including "If you use your ISP’s own email service (instead of a third-party such as Gmail), sometimes it may not work if you use another Internet access point, such as a cafe with wireless Internet. Ask your email provider if the settings they give you will work on other networks."
What to ask if you're having issues sending, receiving, or configuring Mail
http://support.apple.com/kb/HT1277

Recently I posted my first question on the discussion forum and received an answer. How can I reply to the answer? Where do I have to click to be able to post my response?I posted a question and received an answer. How can I reply to the answer

This may seem stupid: Recently I posted my first question to the discussion forum. I received an answer. Where can I reply to the answer?

It looks like this:
You will only see it if you Sign In with your appleID
Captfred

How to determine receivers in the send step in BPM?

Hi Guys,
I have 3 send steps in BPM defined with send context and for each send step i have defined a receiver determination in ID. Each Receiver Determination has a condition based on which identifies multiple receivers.
The BPM is failing and unable to determine the conditional routing. Do i need to add the receiver determination step before each send step so that it identifies the receivers.
Any help would be appreciated.
Thanks,
Raj

Hi Guys,
Thanks for all of you for the quick replies and it is really a great help.
We have resolved the issue. The approach is as below.
we have a generic design used by multiple customers. For the interface where we have the BPM, we are doing conditional routing for each customer before they hit the BPM that is as soon as we receive the Asynchronus request based on the condition we direct the message to a particular BPM. Basically every customer will have different BPM process. ie we create the same BPM with different names specific to each customer and in this way we dont complicate the BPM process and we will know if any particular customer has problems with his process.
Please let me know comments or suggestions on the above approach
Thanks,
Raj

How do you respond to multiple recipients on a text message? I can only respond to the sender.

How do you respond to multiple recipients on a text message on the samsung brighside? I can only respond to the sender of the text.

Being that the Brightside is a basic phone, it might not be capable of responding to a group. The option does seem to be there, though - pg. 48 of the user manual:
While viewing a message touch to display available options:
• Reply w. Copy: Reply to the sender, plus other recipients if desired,
and include a copy of the original message.
Using the "More" option, you can apparently add recipients, or reply to more than one.

How to block emails with specific sender name?

I find some of the spam emails has a common sender name, but the sender email address is random. How to create an Outlook rule to block such emails? It seems Outlook rule can only blocks emails based on sender email address, not the sender name.
Also is it possible to block emails based on its language, for example, I want to block all emails in Russian.

Hi,
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

SMS alert - I dont want the name of the sender appearing on the screen

Prior to downloading the recent upgrade, my SMS alert would simply notify me that I had a new text message but would not identify the sender. Now, the sender's names appears on the screen. How can I change my setting so that the sender's name is not visible?

The SMS preview has been changed in the new firmware, see this thread:
http://discussions.apple.com/thread.jspa?threadID=1797569&start=0&tstart=0
So displaying the senders name can't be switched off. But you can forward your wish here:
http://www.apple.com/feedback/iphone.html.

Secondary Costs Manual Allocation but with a negative debit for the sender

Hi,
We would like to do a manual allocation for secondary cost (the sender objet is a cost center and the receiver objet is other cost center). The only way we know to do this, is using transaction KB15N, but with this transaction, system credits a sender object (for example, a cost center) and debits a receiver object (for example, an new cost center). Is it possible to do this allocation but having a debit (a negative debit) for the sender object and a debit (a possitive debit) for the receiver objets? We do not want to have credits, because the credit does not work properly for the cost splitting.
Thank you really very much,
Ariana

Hi,
If I put the receiving cost center in the sender side and the sending cost center on the receiving side with a negative value, the problem is that the credit is done for the receiving cost center. For the kss2 we have not problems because all of the costs are on the debit, but for the receiving cost center when we run the keu5 we have problems because keu5 transaction does not take properly costs on the credit (it does not consider costs on the credit as negative costs on the debit).
Does anybody know how can we solve this problema?
Thank you really very much,
Ariana
Edited by: Ariana Landaluce on Jun 23, 2009 8:45 AM

How to send reply to the sender of a multicast messg

Similar Messages

Maybe you are looking for