How to send soap attachment without SAAJ
I have to send XML or text file as an attachment in the web service, just like email attachment. Currently I am intercepting the SOAP message (sent from web service client) and then adding an attachment using SAAJ. Can we send an attachment without intercepting and SAAJ in netbeans just like how we send other data (with basic datatypes ) as parameters to the web service operation ?
TIA.
Soap is a protocol that runs over TCP (sockets.) You can build the entire soap message by hand if you want to.
That said adding something is dependent on the fact that the other side will consume it.
Similar Messages
-
How to send any text as soap attachment without SAAJ ?
I have to send XML or text file as an attachment in the web service, just like email attachment. Currently I am intercepting the SOAP message (sent from web service client) and then adding an attachment using SAAJ. Can we send an attachment without intercepting and SAAJ in netbeans just like how we send other data (with basic datatypes ) as parameters to the web service operation ?
TIA.Wrong forum where to ask such questions.
Check this one link:
http://www.unix.com/shell-programming-scripting/18370-sending-email-text-attachment-using-mailx.html?t=18370#post70254 -
How to Send Multiple Attachment by SOAP Adapter
Hi,
How to send multiple attachment by SOAP Adapter.
I am able to send single attachment but at the time of sending multiple attachment i am not able to see in SXMB_moni.
Regards,
AnuragOn the communication channel, please check the 'Do Not Use SOAP envelope' option. Also, please, add the "nosoap" attribute to the SOAP adapter caller. Check the note below for more information
#856597 FAQ: XI 3.0 / PI 7.0 / PI 7.1 SOAP Adapter
> "How does the nosoap mode work for the SOAP sender adapter?" -
How to send an attachment thru mail in SAP?
Hi all,
I have an file which has been sent by the customer. The file type may vary each & every week (sometimes XLS, sometimes CSV & sometimes notepad). This file has to be sent to another person thru mail as an attachment.
Is it possible to send thru the fun mod 'SO_SEND_NEW_*'.
If so how to send as attachment. If not thru this fun mod, how to send?
Thanks,
Vijay.I am enclosing the sample code to trigger an email, The logic for this is in comments, check this I am shure yuor problem will be solved.
*& Report ZGBL_SLA_PER
REPORT zgbl_sla_per NO STANDARD PAGE HEADING LINE-COUNT 26(3) MESSAGE-ID
zmsg2.
DECLARATION OF DB TABLES
TABLES: zncrfid, zrule_id.
DECLARATION OF INTERNAL TABLES
DATA: BEGIN OF ncrf OCCURS 0,
zncrf_id(15) TYPE c,
zncrf_l4_name(60) TYPE c,
z9gl_sla_flag(1) TYPE c,
zowners(30) TYPE c,
zowners_value(30) TYPE c,
zdate_changed(8) TYPE n,
ztime_changed(6) TYPE n,
END OF ncrf.
*DATA: NCRF LIKE ZNCRFID OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF it_ruleid OCCURS 0,
zrule_id(10) TYPE c,
zowners(30) TYPE c,
zowners_value(30) TYPE c,
END OF it_ruleid.
*data: wa like ncrf occurs 0 with header line.
DATA: BEGIN OF itab OCCURS 0,
zncrf_id(15) TYPE c,
zncrf_l4_name(60) TYPE c,
z9gl_sla_flag(1) TYPE c,
zowners(30) TYPE c,
zowners_value(30) TYPE c,
zdate_changed(8) TYPE n,
ztime_changed(6) TYPE n,
END OF itab.
data: file(10) type c,
dates type date.
EMAIL DECLARATION
*CONSTANTS: c_subject LIKE sodocchgi1-obj_descr VALUE 'Subject',
*c_tab TYPE c VALUE cl_abap_char_utilities=>horizontal_tab.
*DATA: g_time TYPE char8,
*g_email(40) TYPE c,
*g_sent_all(1) TYPE c,
*g_doc_data LIKE sodocchgi1,
*g_error TYPE sy-subrc.
*DATA: i_message LIKE solisti1 OCCURS 0 WITH HEADER LINE,
*i_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
*i_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
*DATA: BEGIN OF mailid OCCURS 0,
zemail_id TYPE zrule_id-zemail_id,
END OF mailid.
*data: mailid like zrule_id occurs 0 with header line.
UPLOADING FLAT FILE TO INTERNAL TABLE NCRF
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = 'C:\VAMSY\file.txt'
filetype = 'ASC'
has_field_separator = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
data_tab = ncrf[]
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
IF sy-subrc EQ 0.
Checking internal table ncrf is empty then
*delete records from TABLE ZNCRF_ID ******************************
IF ncrf[] IS INITIAL.
MESSAGE i003(ZMSG2).
ELSE.
DELETE FROM zncrfid.
ENDIF.
*****Values are read from rule table and checking owner and owner_value
*from zrule_id table and inserted into ZNCRFID **************
SELECT * FROM zrule_id INTO CORRESPONDING FIELDS OF TABLE it_ruleid
WHERE zrule_id IN ('OWNER1', 'OWNER2').
append IT_RULEID.
LOOP AT ncrf WHERE z9gl_sla_flag EQ 'Y'.
READ TABLE it_ruleid WITH KEY zowners = ncrf-zowners
zowners_value = ncrf-zowners_value.
IF ncrf-zowners = it_ruleid-zowners AND ncrf-zowners_value =
it_ruleid-zowners_value AND ncrf-z9gl_sla_flag ='Y'.
itab-zncrf_id = ncrf-zncrf_id.
itab-zncrf_l4_name = ncrf-zncrf_l4_name.
itab-z9gl_sla_flag = ncrf-z9gl_sla_flag.
itab-zdate_changed = sy-datum.
itab-ztime_changed = sy-uzeit.
itab-zowners = it_ruleid-zowners.
itab-zowners_value = it_ruleid-zowners_value.
APPEND itab.
ENDIF.
ENDLOOP.
modify database table zncrfid FROM ITAB
LOOP AT itab.
WRITE:/ itab-zncrf_id, itab-zncrf_l4_name, itab-z9gl_sla_flag,
itab-zowners, itab-zowners_value, itab-zdate_changed,
itab-ztime_changed.
zncrfid-zncrf_id = itab-zncrf_id.
zncrfid-zncrf_l4_name = itab-zncrf_l4_name.
zncrfid-z9gl_sla_flag = itab-z9gl_sla_flag.
zncrfid-zowners = itab-zowners.
zncrfid-zowners_value = itab-zowners_value.
zncrfid-zdate_changed = itab-zdate_changed.
zncrfid-ztime_changed = itab-ztime_changed.
INSERT INTO zncrfid VALUES zncrfid.
ENDLOOP.
ENDIF.
ENDIF.
*CALL FUNCTION 'DATE_TO_DAY'
EXPORTING
DATE = sy-datum
IMPORTING
WEEKDAY = file.
**CHECKING FOR THE FIRST MONDAY OF THE MONTH.
dates = sy-datum.
shift dates by 6 places left.
if file CO 'monday' and dates < 7 and dates >= 1.
else.
message e004(zmsg2).
endif.
EMAIL SEND TO OWNERS LIST
**Fill the mail body in i_message.
get email id's from database into internal table et_mailid
Fill the document data.
*g_doc_data-doc_size = 1.
Populate the subject/generic message attributes
*g_doc_data-obj_langu = sy-langu.
*g_doc_data-obj_name = 'SAPRPT'.
*g_doc_data-obj_descr = c_subject .
*g_doc_data-sensitivty = 'F'.
Describe the body of the message
Information about structure of data tables
*CLEAR i_packing_list.
*REFRESH i_packing_list.
*i_packing_list-transf_bin = space.
*i_packing_list-head_start = 1.
*i_packing_list-head_num = 0.
*i_packing_list-body_start = 1.
*DESCRIBE TABLE i_message LINES i_packing_list-body_num.
*i_packing_list-doc_type = 'RAW'.
*APPEND i_packing_list.
Add the recipients email address
*LOOP AT mailid.
*CLEAR i_receivers.
*i_receivers-receiver = mailid-zemail_id.
*i_receivers-rec_type = 'U'.
*i_receivers-com_type = 'INT'.
*i_receivers-notif_del = 'X'.
*i_receivers-notif_ndel = 'X'.
*APPEND i_receivers.
*ENDLOOP.
Call the FM to post the message to SAPMAIL
*CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
*EXPORTING
*document_data = g_doc_data
*put_in_outbox = 'X'
*commit_work = 'X'
*IMPORTING
*sent_to_all = g_sent_all
*TABLES
*packing_list = i_packing_list
*contents_txt = i_message
*receivers = i_receivers
*EXCEPTIONS
*too_many_receivers = 1
*document_not_sent = 2
*document_type_not_exist = 3
*operation_no_authorization = 4
*parameter_error = 5
*x_error = 6
*enqueue_error = 7
*OTHERS = 8.
Store function module return code
*g_error = sy-subrc.
Get i_receivers return code
*LOOP AT i_receivers.
*ENDLOOP.
**Instructs mail send program for SAPCONNECT to send email(rsconn01)
*WAIT UP TO 2 SECONDS.
*IF g_error EQ 0.
*SUBMIT zgbl_sla_per WITH mode = 'INT'
*WITH output = 'X'
*AND RETURN.
REWARD IF FOUND USEFULL,
Cheers, -
How to send an attachment with adobe form
Hi
in my application i have two process intiator and approval process both are adobe interactive forms,according to my scenarion i need to send an attachment(pdf or word document....)in intiatior to approval process,can pleasse tell me how to send the attachment.
Thanks
Raju
Edited by: raju on Oct 7, 2008 6:39 AMhi!
chk these links .
Re: Sending Adobe Interactive Forms via Email
Re: Saving and sending Adobe Form pdf from WebDynpro
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/176882c3-0401-0010-9fbc-d9fa1f713a73
thanks
vishal -
How to send an attached folder without compressing?
When using Mail 2.1.3 on 10.4.11 and sending more than one photo, I like to put them in a folder, so they get better organized. However, the application Mail will zip this folder on sending. Sometimes my recipients (on PC) have then difficulties opening this zipped folder. I don't want to tell them "you should install this and that application for unzipping".
In settings of Mail I find no checkbox for this- it does it by itself...
Is there any way to send an attached folder without compressing it, just plain?Frederick,
thank you for the reply.
Maybe I did not explain clearly enough. Let's say I have ten JPEGs. I make a new folder in Finder, call it "Pictures" or so, put the JPEGs in it and then, after writing the mail, I click "attach" and select the newly generated folder so that it will be attached. In the outgoing window of the mail I see it then as the "Pictures" folder. The recipient then gets the mail with an attachment called "pictures.zip" that calls for an unzip application in order to take a look at those JPEGs.
Now the problem is, Mail app will automatically make a zip out of it. Yes, I have "Send PC-compatible" turned on. I use, b.t.w. plain text, not formatted. Some recipients have no problems with the zip, I know, but some do have.
I want Mail to send the folder without zipping it. Making it a little bit smaller in size is (indeed only a little bit!), in many cases, not necessary and, like I wrote, often only confusing (especially when the recipient PC asks "...this is a programme, do you want it to open?- Of course, most reasonable users are afraid of those messages!).
The point is, my application is doing something that I don't want and I find no way to tell it "please, no". -
How to send PDF attachment through Email For Purchase Order
Hi,
Can you please tell me how to send the Purchase Order with PDF attachment. Thank you.
Thanks & Regards,
Rani.Find the below example
*& Report ZSPOOLTOPDF *
*& Converts spool request into PDF document and emails it to *
*& recipicant. *
*& Execution *
*& This program must be run as a background job in-order for the write *
*& commands to create a Spool request rather than be displayed on *
*& screen *
REPORT zspooltopdf.
PARAMETER: p_email1 LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_sender LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_delspl AS CHECKBOX.
*DATA DECLARATION
DATA: gd_recsize TYPE i.
Spool IDs
TYPES: BEGIN OF t_tbtcp.
INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
wa_tbtcp TYPE t_tbtcp.
Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
gd_eventparm LIKE tbtcm-eventparm,
gd_external_program_active LIKE tbtcm-xpgactive,
gd_jobcount LIKE tbtcm-jobcount,
gd_jobname LIKE tbtcm-jobname,
gd_stepcount LIKE tbtcm-stepcount,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_sender_type LIKE soextreci1-adr_typ,
gd_attachment_desc TYPE so_obj_nam,
gd_attachment_name TYPE so_obj_des.
Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
gd_destination LIKE rlgrap-filename,
gd_bytecount LIKE tst01-dsize,
gd_buffer TYPE string.
Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
c_no(1) TYPE c VALUE ' ',
c_device(4) TYPE c VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
Write statement to represent report output. Spool request is created
if write statement is executed in background. This could also be an
ALV grid which would be converted to PDF without any extra effort
WRITE 'Hello World'.
new-page.
commit work.
new-page print off.
IF sy-batch EQ 'X'.
PERFORM get_job_details.
PERFORM obtain_spool_id.
Alternative way could be to submit another program and store spool
id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
to sap-spool
spool parameters %_print
archive parameters %_print
without spool dynpro
and return.
Get spool id from program called above
IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
PERFORM convert_spool_to_pdf.
PERFORM process_email.
if p_delspl EQ 'X'.
PERFORM delete_spool.
endif.
IF sy-sysid = c_dev.
wait up to 5 seconds.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDIF.
ELSE.
SKIP.
WRITE:/ 'Program must be executed in background in-order for spool',
'request to be created.'.
ENDIF.
FORM obtain_spool_id *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident <> '0000000000'
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
message s004(zdd) with gd_spool_nr.
gd_spool_nr = wa_tbtcp-listident.
MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
MESSAGE s005(zdd).
ENDIF.
ENDFORM.
FORM get_job_details *
FORM get_job_details.
Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
ENDFORM.
FORM convert_spool_to_pdf *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att = gd_buffer.
APPEND it_mess_att.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM.
FORM process_email *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
perform send_email using p_email2.
ENDFORM.
FORM send_email *
--> p_email *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
Default subject matter
gd_subject = 'Subject'.
gd_attachment_desc = 'Attachname'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod = 'Message Body text, line 1'.
APPEND it_mess_bod.
it_mess_bod = 'Message Body text, line 2...'.
APPEND it_mess_bod.
If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_mess_bod
it_mess_att
using p_email
'Example .xls documnet attachment'
'PDF'
gd_attachment_name
gd_attachment_desc
p_sender
gd_sender_type
changing gd_error
gd_reciever.
ENDFORM.
FORM delete_spool *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
spoolid = ld_spool_nr.
ENDFORM.
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM send_file_as_email_attachment tables it_message
it_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
Reward if helpful.
Thanks,
Kishore S N -
How to send SOAP Message with Oracle B2B
Hi everyone,
I need your help to send out from Oracle B2B a SOAP message with attachment of any type of file (image, pdf, etc.). Possibly using a SOA composite application or another way, it doesn't matter. I already create an ebMS partnership with a custom document protocol and I already create a working SOA composite application to send only text message to my trading partner. I have tried this solution: http://anuj-dwivedi.blogspot.it/2011/04/ebms-attachment-handling-in-oracle-b2b.html but it doesn't work for my case... It is to be noticed that I don't give any schema to my component in the SOA application explained firstly, and I select opaque as schema.
Thanks to all, regards
NelloHi Anuj and thanks for your help,
I need to send an ebXML message, with SOAP, and I try to send it with a .war application written in jsp connecting to http://10.85.28.24:8001/b2b/transportServlet to send the SOAP message. The errors reported is:
javax.xml.soap.SOAPException: Unable to receive message. Received a response from url: http://10.85.28.24:8001/b2b/transportServlet with HTTP status 200 and SOAP content-type: null.
the code I write is the following (to evaluate the two "null" in the super constructor)
<%!
public class EBMSSender extends SOAPRunner
private String cpaId;
private String service;
private String action;
private String mess;
private ArrayList<String> allegati=null;
public EBMSSender(String cpaId, String service, String action, String mess, ArrayList<String> file)
super("http://10.85.28.24:8001/b2b/transportServlet","null", "null");
this.cpaId = cpaId;
this.service = service;
this.action = action;
this.mess=mess;
this.allegati=file;
@Override
protected void prepareRequest(SOAPMessage soapMessage, SOAPBody soapBody) throws SOAPException
soapBody.addChildElement(SOAPUtility.createElement("CPAId", getNsPrefix(), getNsURI(),"agr3"));
soapBody.addChildElement(SOAPUtility.createElement("service", getNsPrefix(), getNsURI(),"OracleService"));
soapBody.addChildElement(SOAPUtility.createElement("action", getNsPrefix(), getNsURI(),"Oracletohermesb"));
soapBody.addChildElement(SOAPUtility.createElement("serviceType", getNsPrefix(), getNsURI(),"OracleServiceType"));
soapBody.addChildElement(SOAPUtility.createElement("convId", getNsPrefix(), getNsURI(), "convId"));
soapBody.addChildElement(SOAPUtility.createElement("fromPartyId", getNsPrefix(), getNsURI(), "Oracle"));
soapBody.addChildElement(SOAPUtility.createElement("fromPartyType", getNsPrefix(), getNsURI(), "Name"));
soapBody.addChildElement(SOAPUtility.createElement("toPartyId", getNsPrefix(), getNsURI(), "Hermes-b"));
soapBody.addChildElement(SOAPUtility.createElement("toPartyType", getNsPrefix(), getNsURI(), "Name"));
attach(soapMessage);
protected void attach(SOAPMessage soapMessage)
String h=mess;
DataHandler dh;
AttachmentPart ap = soapMessage.createAttachmentPart(h,"text/plain");
soapMessage.addAttachmentPart(ap);
if(allegati!=null)
for(int i=0; i<allegati.size();i++)
dh=new DataHandler(new FileDataSource(new File(allegati.get(i))));
ap=soapMessage.createAttachmentPart(dh);
ap.setContentType(new MimetypesFileTypeMap().getContentType(allegati.get(i)));
ap.setContentLocation(allegati.get(i));
soapMessage.addAttachmentPart(ap);
@Override
protected void processFault(SOAPFault soapFault) throws SOAPException{}
@Override
protected Object processResponse(SOAPMessage responseMessage,SOAPBody responseBody) throws SOAPException
SOAPElement messageId = SOAPUtility.getChild(responseBody, "message_id", getNsURI());
return null;
%>
The code works fine on the other trading partner side to send ebXML message to Oracle B2B. Apart from this solution (however,it would be my favorite), I find your blog and I try to implement your solution. It works: it sends files with only text payload to the other trading partner without any problem, but if I try to send for example an image in byte array written in a file .txt, the ebxml file received has the byte array with wrong characters. it may be that I have not provided the xsd schema? in case if I wanted to send an ebXML message with text and attachments, what xsd schema do I need to provide?
or is there another way to implement a SOA composite application to send SOAP messages with attachments?
Thank for your help!, regards
Nello -
How to send SOAP Message with attachments?
Hi All,
I am working on a SOAP to RFC Scenario With specific requirement of handling the attachment(Mainly Excel Attachments) at the Sender SOAP Adapter.
Kindly Suggest.
I found lot of theoritical stuff but no practical scenario.
Regards,
SachiHi Sachi,
To handle attachment in SOAP sender adapter first of all you will have to use the AXIS message protocol.
Then by using MessageTransformBean you can handle the attachment.
1) Check this link for the module processing sequence used to get the attachment from SOAP
SOAP Axis sender with CSV file attachment
2) Check this blog which will help you on the usage of MessageTransformBean
Solve Key Field Problem using StructPlain2XML in MessageTransformationBean!!
http://help.sap.com/saphelp_nw04/helpdata/en/24/4cad3baabd4737bab64d0201bc0c6c/frameset.htm
using MessageTransformBean you can handle only the text file attachments like comma separated file, pipe separated, fixed lengths etc. But if you are looking to handle a excel file you will have to use a java mapping to get the data from excel attached file. for this have a look at this following blog by Shabarish:
Excel Files - How to handle them in SAP XI/PI (The Alternatives)
Do remember to use SOAP Axis adapter and to tick the keep attachment option.
Hope this helps.
Regards,
Aravind -
How to send the email without using server side (Php, java)
How to send the (Run time image or file) Email & Attachment in Flex web application. without using php, java.
Well, at some point your email needs to be handed over to an SMTP server. It's a fair amount of work, but if you want to just send an email you could open a socket to a mail server's SMTP port and follow the SMTP protocols to send your email.
ActionScript sockets: http://help.adobe.com/en_US/ActionScript/3.0_ProgrammingAS3/WS5b3ccc516d4fbf351e63e3d118a9 b90204-7cf7.html
SMTP protocol: http://tools.ietf.org/html/rfc821
-- Tom -
How to send multiple attachements in single mail
Hi All,
Currently i am using this function module SO_NEW_DOCUMENT_ATT_SEND_API1 to send mail with only one attachment.
But now i need to send multiple attachments to a single mail.
Can any one please tell me as how to send multiple attachments in single mail.
Thanks in advance.Hi
See this and do accordingly
Mailing with Attachment by ABAP Coding
Refer this link:
Mail with attachment.
FORM send_list_to_basis .
DATA: w_path LIKE rlgrap OCCURS 0 WITH HEADER LINE,
lt_index TYPE sy-tabix,
doc_type(3) TYPE c,
descr LIKE it_objpack_basis-obj_descr,
temp_data LIKE w_path,
temp1 TYPE string,
tab_lines TYPE i,
langu(15) TYPE c,
expirydate TYPE so_obj_edt,
L_FILE1(100).
CONCATENATE 'C:\' sy-repid '_' sy-datum '.XLS' INTO L_FILE1.
W_PATH-FILENAME = L_FILE1.
APPEND w_path.
CLEAR w_path.
wa_doc_chng-obj_descr = 'User List not logged on for 180 days'.
wa_doc_chng-obj_langu = 'E'.
wa_doc_chng-obj_expdat = sy-datum.
CLEAR w_subject.
CONCATENATE 'Please find attached document with list of users'
'not logged on for 180 days for client' sy-mandt
INTO w_subject SEPARATED BY space.
it_objtxt_basis-line = w_subject.
APPEND it_objtxt_basis.
CLEAR it_objtxt_basis.
it_objtxt_basis-line = text-004.
APPEND it_objtxt_basis.
CLEAR it_objtxt_basis.
CLEAR w_tab_line.
DESCRIBE TABLE it_objtxt_basis LINES w_tab_line.
READ TABLE it_objtxt_basis INDEX w_tab_line INTO l_cline.
wa_doc_chng-doc_size =
( w_tab_line - 1 ) * 255 + STRLEN( l_cline ).
CLEAR it_objpack_basis-transf_bin.
it_objpack_basis-head_start = 1.
it_objpack_basis-head_num = 0.
it_objpack_basis-body_start = 1.
it_objpack_basis-body_num = w_tab_line.
it_objpack_basis-doc_type = 'RAW'.
APPEND it_objpack_basis.
CLEAR it_objpack_basis.
LOOP AT w_path.
temp1 = w_path.
descr = w_path.
CALL FUNCTION 'STRING_REVERSE'
EXPORTING
string = descr
lang = 'E'
IMPORTING
rstring = descr.
CALL FUNCTION 'STRING_SPLIT'
EXPORTING
delimiter = '\'
string = descr
IMPORTING
head = descr
tail = temp_data.
CALL FUNCTION 'STRING_REVERSE'
EXPORTING
string = descr
lang = 'E'
IMPORTING
rstring = descr.
CALL FUNCTION 'STRING_SPLIT'
EXPORTING
delimiter = '.'
string = descr
IMPORTING
head = temp_data
tail = doc_type.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = temp1
filetype = 'BIN'
header_length = 0
read_by_line = 'X'
replacement = '#'
TABLES
data_tab = it_upload.
DESCRIBE TABLE it_upload LINES tab_lines.
DESCRIBE TABLE it_objbin_basis LINES lt_index.
lt_index = lt_index + 1.
LOOP AT it_upload.
wa_objbin_basis-line = it_upload-line.
APPEND wa_objbin_basis TO it_objbin_basis.
CLEAR wa_objbin_basis.
ENDLOOP.
it_objpack_basis-transf_bin = 'X'.
it_objpack_basis-head_start = 0.
it_objpack_basis-head_num = 0.
it_objpack_basis-body_start = lt_index.
it_objpack_basis-body_num = tab_lines.
it_objpack_basis-doc_type = doc_type.
it_objpack_basis-obj_descr = descr.
it_objpack_basis-doc_size = tab_lines * 255.
APPEND it_objpack_basis.
CLEAR it_objpack_basis.
ENDLOOP.
it_reclist_basis-receiver = '[email protected]'.
it_reclist_basis-rec_type = 'U'.
APPEND it_reclist_basis.
CLEAR it_reclist_basis.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wa_doc_chng
put_in_outbox = 'X'
commit_work = 'X'
TABLES
packing_list = it_objpack_basis
contents_txt = it_objtxt_basis
contents_bin = it_objbin_basis
receivers = it_reclist_basis
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
OTHERS = 99.
IF sy-subrc EQ 0.
SUBMIT rsconn01 WITH mode = 'INT' AND RETURN.
ENDIF.
ENDFORM. " send_list_to_basis
<b>Reward points for useful Answers</b>
Regards
Anji -
How to send multiple attachment s with a mail??
Hi,
How to send multiple attachments with a mail??
Situation::
In my case i have 5 internal tables populated dynamically in the report.
I want to send them in .TXT format as attachment with 1 mail.
Can anybody tell me in 'SO_NEW_DOCUMENT_ATT_SEND_API1',
how we add multiple attachmants to table objin???
thanks,
deepakHi Deepak,
Please find the sample code for sending mail with multiple attachment.
Report ZPAN_02M *
REPORT zpan_02m .
*-MAIN DECLARATION----
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
*-OTHER DECLARATIONS----
DATA : listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
DATA : tab_lines(3) TYPE n.
DATA : att_type LIKE soodk-objtp.
*OBJBIN = ' | '. APPEND OBJBIN.
*---For simple attachment -
DATA : BEGIN OF wi_data OCCURS 0,
c1(10),
c2(10),
END OF wi_data.
wi_data-c1 = 'Line 1'. wi_data-c2 = 'Line 1'. APPEND wi_data.
wi_data-c1 = 'Line 2'. wi_data-c2 = 'Line 2'. APPEND wi_data.
wi_data-c1 = 'Line 3'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 4'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 5'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 6'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 7'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 8'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 9'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 10'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 11'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 12'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 13'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 14'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 15'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 16'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 17'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 18'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 19'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 20'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 21'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 22'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 23'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 24'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 25'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 26'. wi_data-c2 = 'Line 3'. APPEND wi_data.
class cl_abap_char_utilities definition load.
constants:
con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
con_cret type c value cl_abap_char_utilities=>CR_LF,
con_nwln type c value cl_abap_char_utilities=>NEWLINE.
LOOP AT wi_data.
CONCATENATE wi_data-c1 con_tab
wi_data-c2
INTO objbin.
condense objbin.
CONCATENATE con_cret objbin INTO objbin.
APPEND objbin.
ENDLOOP.
*---CREATE MESSAGE : DOCDATA -
Name
docdata-obj_name = 'TEST_ALI'.
Subject
docdata-obj_descr = 'Test including ALI/HTML Attachment'.
*---CREATE MESSAGE : BODY -
objtxt = 'Test Document.'.
APPEND objtxt.
objtxt = 'You will find an ALI/HTML attachment in this message.'.
APPEND objtxt.
objtxt = 'Have a nice day.'.
APPEND objtxt.
*-CREATE PACKING LIST-----TEXT--
objpack-head_start = 1.
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'RAW'.
APPEND objpack.
*-CREATE PACKING LIST-----ATTACHMENT--
att_type = 'XLS'.
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( ( tab_lines / 2 ) - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines / 2.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT 1'.
objpack-obj_descr = 'Attached Document 1'.
APPEND objpack.
att_type = 'XLS'.
objpack-doc_size = ( ( tab_lines / 2 ) - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 14.
objpack-head_num = 14.
objpack-body_start = 14.
objpack-body_num = tab_lines / 2.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT 2'.
objpack-obj_descr = 'Attached Document 2'.
APPEND objpack.
*-CREATE RECEIVER LIST----
reclist-receiver = '[email protected]'. reclist-rec_type = 'U'.
APPEND reclist.
reclist-receiver = sy-uname. reclist-rec_type = 'B'.
APPEND reclist.
*-SEND MESSAGE----
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X'
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
CONTENTS_HEX = objhex
OBJECT_PARA =
OBJECT_PARB =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
Hope this is enough for you...
Enjoy SAP.
Pankaj Singh. -
How to send SOAP request by HTTP POST?
I want to access a SOAP webservice using mx.rpc.soap.mxml.WebService.
Following is my code:
<mx:WebService id="miner_service" wsdl="http://localhost:8080"> <mx:operation name="hello" result="echoResultHandler(event);"></mx:operation></mx:WebService>
When debugging with that, I got such error message:
[Fault] exception, information=[RPC Fault faultString="HTTP request error" faultCode="Server.Error.Request" faultDetail="Unable to load WSDL. If currently online, please verify the URI and/or format of the WSDL (http://localhost:8080)"]
Then I use Fiddler try to capture the response returned by server, it's like this:
Error responseError code 501. Message: Unsupported method ('GET'). Error code explanation: 501 = Server does not support this operation.
But when I use python to send SOAP request by HTTP POST, the server will return correct response.
So how can I send SOAP request by HTTP POST?
(I tried <mx:WebService wsdl="http://localhost:8080" method="POST">, but no luck..)Sorry for my late reply..
There's no WSDL for that SOAP service -
How to send an attachment with password protection
Hii all,
I am working on sending an attachment from an ABAP program. The attachement is either .xls or .pdf format. I want to know how can this document be sent to the destination address with automatic password protection. The password should automatically be sent to the receiver in the mail.
Any suggestions? Please help.
Thanks in advance.
ByeSELECTION-SCREEN BEGIN OF BLOCK BLOCK.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(8) PWD.
SELECTION-SCREEN POSITION 35.
PARAMETERS: PASSWORD(8) MODIF ID AAA.
SELECTION-SCREEN END OF LINE.
PARAMETERS: PROGRAM LIKE TRDIR-NAME.
SELECTION-SCREEN END OF BLOCK BLOCK.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'AAA'.
SCREEN-INVISIBLE = '1'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
INITIALIZATION.
PWD = 'PASSWORD'.
START-OF-SELECTION.
TABLES: TRDIR.
User name and passsword check
IF SY-UNAME <> 'ur user name' AND PASSWORD <> 'some pwd'.
WRITE: / 'Wrong password'.
EXIT.
ENDIF.
SAP owned?
IF NOT PROGRAM CP 'Z' AND NOT PROGRAM CP 'Y'.
WRITE: / 'Do not hide original SAP programs!'.
EXIT.
ENDIF.
Exists?
SELECT SINGLE * FROM TRDIR WHERE NAME = PROGRAM.
IF SY-SUBRC <> 0.
WRITE: / 'Program does not exists!'.
EXIT.
ENDIF.
Does it have a current generated version?
DATA: F1 TYPE D, F3 TYPE D.
DATA: F2 TYPE T, F4 TYPE T.
EXEC SQL.
SELECT UDAT, UTIME, SDAT, STIME INTO :F1, :F2, :F3, :F4 FROM D010LINF
WHERE PROG = :PROGRAM
ENDEXEC.
IF F1 < F3 OR ( F1 = F3 AND F2 < F4 ).
WRITE: / 'The program has no recent generated version!'.
EXIT.
ENDIF.
Compose a new program name
DATA: NEW_NAME(8), I TYPE I, J TYPE I.
NEW_NAME = PROGRAM.
DO 8 TIMES.
I = SY-INDEX - 1.
NEW_NAME+I(1) = '_'.
Search for acceptable program name variations
J = 0.
SELECT * FROM TRDIR WHERE NAME LIKE NEW_NAME.
J = J + 1.
ENDSELECT.
IF J = 1.
EXIT.
ENDIF.
NEW_NAME = PROGRAM.
ENDDO.
Cannot generate appropriate program name
IF J > 1.
WRITE: / 'Cannot generate appropriate program name'.
EXIT.
ENDIF.
Check if it is already in d010s (already hidden)
DATA: F5(8).
EXEC SQL.
SELECT PROG INTO :F5 FROM D010S WHERE PROG = :NEW_NAME
ENDEXEC.
IF F5 IS INITIAL.
There is no such hidden program, hide it
EXEC SQL.
UPDATE D010S SET PROG = :NEW_NAME WHERE PROG = :PROGRAM
ENDEXEC.
ELSE.
There is already a hidden program there, unhide it
EXEC SQL.
UPDATE D010S SET PROG = :PROGRAM WHERE PROG = :NEW_NAME
ENDEXEC.
ENDIF. -
How to send an attachment of a file from a procedure
Hi
How to send an email with an attachment of a file from a procedurehttp://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/u_mail.htm#sthref14875
http://asktom.oracle.com/pls/asktom/f?p=100:11:1400170679814652::::P11_QUESTION_ID:1739411218448
http://www.akadia.com/services/java_mail_plsql.html
Maybe you are looking for
-
Worksheets are not able to see.
Hi, Installed the apps in (example AB instance(Server) Seperate System).In User AB(Client System) installed the BI Admin and BI Desktop 10. Created the worksheets from the client system and saved to the database (i.e server system example instancenam
-
When using i photo and trying to pull up individual photos - the photo will appear and quickly disappear only to be replaced by a black screen with a white explanation mark. This happens with all of my photos. Has anyone had this problem and if so
-
I bought an iPhone 3 from eBay and when my husband tried to update it all that comes up on the screen is the imei and iccid numbers along with the iTunes icon and a USB. I can only use it for emergency calls as that is all that happens when I slide i
-
After upgrading to 8.1, I am facing massive stability problems and functions that don't work any more. While going through 200 freshly downloaded photos applying the required rotations, iPhoto crashed three times and upon restart told me that my libr
-
Needing some help with Time Capsule Error. New to Apple Support and not super tech smart.
Can not get the MacBook Pro to back up to Time Capsule. Can any one help me with the following Error Please? The backup disk image "/Volumes/Data/XXXXXXXXXX MacBook Pro.sparsebundle" is already in use.