How to send the sap data to mobile service through custmozed object

Dear ABAPer,
  I have developed the customized object. But , I want to send the data to radio frequency service( Example: Mobile No ) through sap customized object.
if you have any idea , please send the document with example roughly.
advance thanks.
with best regards,
velmurugan.S

Hello,
you can create a Report that accepts the search parameters from the Forms mask and generates a PDF. You also have the option to send the report via mail.
Personally I would generate the report with a tool like as_pdf
http://technology.amis.nl/2012/04/11/generating-a-pdf-document-with-some-plsql-as_pdf_mini-as_pdf3/
Then you can send the mail using utl_mail or utl_smtp.
www.google.com/search?q=site:forums.oracle.com+utl_mail+utl_smtp
Regards
Marcus

Similar Messages

  • How to send the form data through mail with pdf format?

    forms 6i
    Hi to all,
    i am developed one master detail form.example is based on the dept number emp details will be displayed.here my requirment is whatever displayed on the form
    the data ,these data send to mail with any format.is it possible? if is possible any one give a proper solution.
    Regards,
    Stevie
    Edited by: 994418 on 6 May, 2013 11:15 PM

    Hello,
    you can create a Report that accepts the search parameters from the Forms mask and generates a PDF. You also have the option to send the report via mail.
    Personally I would generate the report with a tool like as_pdf
    http://technology.amis.nl/2012/04/11/generating-a-pdf-document-with-some-plsql-as_pdf_mini-as_pdf3/
    Then you can send the mail using utl_mail or utl_smtp.
    www.google.com/search?q=site:forums.oracle.com+utl_mail+utl_smtp
    Regards
    Marcus

  • HOW TO SEND THE REPORTS AND  THROUGH XI TO NON -SAP SYSTEM

    Hi Experts,
                 I want to know how to send the reports and  smartform through xi to another system. All the post blogs are   just explaning only about the FILE-TO-FILE, FILE-TO-IDOCS scenarios only.

    Hi,
    XI is the middleware that to be used to transfer the data between various systems and even you could design the Business Processes with it.
    In R/3 the smartforms, are generally converted to PDF and then  have to send it across to Non SAP systems. Similarly you can convert the smartforms to pdf format and keep it on application server. XI will pick up that pdf and will send it to Non SAP system either as mail or as an attachments.
    ABAP reports are normally used to re-present the data. If you need to transfer this data across the Non SAP systems then you have the IDOCs to be generated, RFC or ABAP Proxy to integrate this data with Non SAP system.
    XI is not restricted only upto file to file or file to IDOC scenarios. It have enormous capabilities to involve various Business Processes as well integrate various SAP or Non SAP systems.
    If need anymore  specific details, please let us know.
    Thanks
    Swarup

  • How to Send the material master data from sap4.6c to ECC6.0

    Hi
        Friends this is shalini Shah, i got one requirement that is
    how to send the materail master data  from SAP 4.6C to ECC6.0 using XI.
    i  know the file to idoc and idoc to file scenarios but i don't know this one.
    please help me friends, Thanks in advance.
    Regards
    Shalini Shah

    Hi Shalini,
    To trigger IDoc these configurations should be done in the SAP 4.6, XI and ECC 6.0.
    SAP XI
    1) RFC Destination (SM59)
    a) Choose create.
    b) Specify the name of the RFC destination
    c) Select connection type as 3 and save
    d) In the technical settings tab enter the details SAP SID/URL and system number#.
    e) Enter the Gateway host as same details above SID/URL.
    f) Gateway service is 3300+system number#.
    g) In the Logon /Security tab, enter the client user & Password details of Destination system.
    h) Test the connection and remote logon.
    2) Create Port (IDX1)
    a) Select create new button
    b) Enter the port name as SAP+SID (The starting char should be SAP)
    c) Enter the destination client.
    d) Enter the RFC Destination created in SAP R/3 towards other system.
    e) Save
    3) Load Meta Data for IDOC (IDX2)
    a) Create new
    b) IDOC Message Type
    c) Enter port created in IDX1.
    SAP R/3 (4.6 and ECC 6.0)
    1) RFC Destination (SM59)
    a) Choose create.
    b) Specify the name of the RFC destination
    c) Select connection type as 3 and save
    d) In the technical settings tab enter the details SAP SID/URL and system number#.
    e) Enter the Gateway host as same details above SID/URL.
    f) Gateway service is 3300+system number#.
    g) In the Logon /Security tab, enter the client user & Password details of Destination system.
    h) Test the connection and remote logon.
    2) Create Port (We21)
    a) First Select Transactional RFC and then click create button
    b) Enter the destination port name as SAP+SID (The starting char should be SAP)
    c) Enter the destination client.
    d) Enter the RFC Destination created in SAP R/3 towards other system.
    e) Save
    3) Create Partner Profile (WE20)
    a) Create New
    b) Create the Partner no. name as same the logical system name of the destination system.
    c) Select Partner type LS
    d) Enter details for Type: US/USER, Agent, and Lang.
    e) Click on the + button to select the message type.
    f) Select Partner no. and LS which ever create above.
    g) Select Message type
    h) Select Process code related to the Message type.
    I) save.
    Also go ther the Blog <a href="/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi Configuration for Pushing IDOC's from SAP to XI</a> By Swaroopa Vishwanath
    U need to import the IDoc types both inbound and outbound to XI.
    1. Create Inbound and Outbound Message interface.
    2. Do one to one message mapping.
    3. Define an Interface mapping.
    ID:
    1. Create 1 Sender aggrement.
    2. Create 1 Receiver aggrement.
    3. Define 1 RD and ID.
    4. Only create an receiver IDoc CC.
    Regards
    San
    <a href="Remember to set the thread to solved when you have received a solution to set the thread to solved when you have received a solution</a>
    Where There is a <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/weblogs?blog=/weblogs/topic/16">blog</a> there is a Way.

  • How to send the data from mac pc to External drive

    how to send the data from mac pc to External HDD
    or Pen Drive but with out deleting the preview as data

    You can use "Finder", which is in your dock, to copy files from your iMac folders over to the external hard drive.
    Hope this helps

  • How to upload the master data from legacy to SAP

    Hi Frends,
    how to upload the master data from legacy system to SAP System once the configuration is over.how to carry forward the open items of vendors and customers while uploading.who will upload functional consultantsor ABAPER.
    please clarify me
    Regards
    Sap Guru

    Hi ,
    use LSMW  or BDC for uploading Master & transaction data.
    This work is done by the Respective Functional team.
    Chandra

  • How to  send ALV output data into Excel sheet format via Mail to the user?

    Hi friends,
    I have a doubt ie,
    How to  send ALV output data into Excel sheet format via Mail to the user?
    regards
    Moosa

    Hi,
    Provide the output internal table to the objbin in the below FM
    Send Message
      CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
           EXPORTING
                document_data              = i_docdata
                put_in_outbox              = c_x
           TABLES
                packing_list               = i_objpack
                object_header              = i_objhead
                contents_bin               = i_objbin
                contents_txt               = i_objtxt
                receivers                  = i_reclist
    and specify the document type
      i_objpack-doc_type   = 'XLS'.
    and try.
    Regards,
    Nandha

  • How to send the data manually

    Hi Experts,
      I need small information.when messages are gone into queue state due to one message 
    When an EDI file came into wrong format and with that some messages are gone into queue state in MONI.
    if i cancel the first message then remaining all the messages are processing successfully.
    So from that cancel message i want sent the data manually as business needs that data.
    Can all please tell  me how to send the data manually with steps.
    Thanks in Advance.
    Bhaskar

    Hi,
    I think you are talking about QoS "EOIO", in which all messages are porcessed in FIFO order and whenever the preceeding message get stuck due to error in the queue, then all the messages are stoped. And yes as soon as you will cancel the message which went into error all the remaining messages will automatically will be delivered.
    In my opinion since QoS is EOIO then it will be not possible to sent the data mannually, you can do one thing, do not cancel the message. Try to correct the messge and then resend it.
    Regards,
    Sarvesh

  • How to select from multiple output tables in the SAP Data Source

    Hi,
    We're using the SAP Data Source to display SAP data in our portal from the Bapi: BAPI_INFORECORD_GETLIST. When defining the Bapi Meta Data we can select data from one of the two output tables (INFORECORD_GENERAL and INFORECORD_PURCHORG). But we want to select data from both tables (some columns we want to show are in INFORECORD_GENERAL and some are in INFORECORD_PURCHORG) .
    How can we do this ?
    With regards,
    Ramon van der Weiden

    You can query multiple TimesTen databases, but your original question was about joining tables from two databases, which is not supported.
    Using Cache Connect to Oracle to query an Oracle database is not distributed. It's still one single Oracle database you are querying. You cannot join a table in the TimesTen database with a table in the Oracle database, this is not allowed.
    If you are willing to share your business requiremens, we can take a look and see what solution might work for you. Would you like to discuss this offline?
    Susan

  • How to remove the system data details from the overview tab in crmd_order?

    Hi All,
    How to remove the system data details from the overview tab in crmd_order?

    Hi,
    It is a standard functionality. Those information will be very useful when you send a message to SAP.
    If you still want to remove them, raise an OSS message.
    Regards,
    Rajesh Kumar

  • How to debugg the SAP Script

    Hi to all.....
    How to Debug the SAP Script when it get's triggered with the Transaction.
    And how to Align the Standard Text data ..That is Justifing the statements.
    Advance Thanks to all
    Chinnu

    In se71, Chose from menu:
    Utilities-> Activate Debugger
    From the transaction, In the output message screen, you chose chose your output type, Go to Further options, Chose the dispatch option as Send at periodically scheduled jobs . then save the transaction. And run the prigram RSNAST00 It would stop at the debugging.
    Regards,
    ravi

  • How to send the file contents in the application server to ftp server

    Hi,
    how to send the file contents in the application server to ftp server.
    regards,
    sree

    Test SAP FTP functions
    DATA: BEGIN OF MTAB_DATA OCCURS 0,
    LINE(132) TYPE C,
    END OF MTAB_DATA.
    DATA: MC_PASSWORD(20) TYPE C,
    MI_KEY TYPE I VALUE 26101957,
    MI_PWD_LEN TYPE I,
    MI_HANDLE TYPE I.
    START-OF-SELECTION.
    MC_PASSWORD = 'password'.
    DESCRIBE FIELD MC_PASSWORD LENGTH MI_PWD_LEN.
    *-- FTP_CONNECT requires an encrypted password to work
    CALL 'AB_RFC_X_SCRAMBLE_STRING'
         ID 'SOURCE' FIELD MC_PASSWORD ID 'KEY' FIELD MI_KEY
         ID 'SCR' FIELD 'X' ID 'DESTINATION' FIELD MC_PASSWORD
         ID 'DSTLEN' FIELD MI_PWD_LEN.
    CALL FUNCTION 'FTP_CONNECT'
         EXPORTING
           USER            = 'userid'
           PASSWORD        = MC_PASSWORD
           HOST            = 'servername'
           RFC_DESTINATION = 'SAPFTP'
         IMPORTING
           HANDLE          = MI_HANDLE
         EXCEPTIONS
           NOT_CONNECTED   = 1
           OTHERS          = 2.
    CHECK SY-SUBRC = 0.
    CALL FUNCTION 'FTP_COMMAND'
         EXPORTING
           HANDLE = MI_HANDLE
           COMMAND = 'dir'
         TABLES
           DATA = MTAB_DATA
         EXCEPTIONS
           TCPIP_ERROR = 1
           COMMAND_ERROR = 2
           DATA_ERROR = 3
           OTHERS = 4.
    IF SY-SUBRC = 0.
      LOOP AT MTAB_DATA.
        WRITE: / MTAB_DATA.
      ENDLOOP.
    ELSE.
    do some error checking.
    ENDIF.
    CALL FUNCTION 'FTP_DISCONNECT'
         EXPORTING
           HANDLE = MI_HANDLE
         EXCEPTIONS
           OTHERS = 1.
    Execute external commands (FTP Scripts)
    The following code shows the syntax of the FM 'SXPG_COMMAND_EXECUTE'. You pass it the external command created within transaction SM69 and it will execute it.
    DATA: ld_comline 
    LIKE sxpgcolist-name,
            ld_param    LIKE sxpgcolist-parameters,
            ld_status   LIKE extcmdexex-status,
            ld_output   LIKE btcxpm OCCURS 0 WITH HEADER LINE,
            ld_subrc    LIKE sy-subrc.
      REFRESH ld_output.
      MOVE 'FTP_DATA_IN' to ld_comline.         "Maintained using trans SM69
    Execute external command, contained in 'ld_comline'
      CALL FUNCTION 'SXPG_COMMAND_EXECUTE'
           EXPORTING
                commandname                   = ld_comline
              additional_parameters   = ld_param  "Params passed to script
              operatingsystem              
    = 'UNIX'
           IMPORTING
                status                        = ld_status
           TABLES
                exec_protocol                 = ld_output
           EXCEPTIONS
                no_permission
                     = 1
                command_not_found
                 = 2
                parameters_too_long          
    = 3
                security_risk                
    = 4
                wrong_check_call_interface    = 5
                program_start_error           = 6
                program_termination_error     = 7
                x_error                       = 8
                parameter_expected            = 9
                too_many_parameters           = 10
                illegal_command               = 11
                wrong_asynchronous_parameters = 12
                cant_enq_tbtco_entry
              = 13
                jobcount_generation_error
         = 14
                OTHERS                       
    = 15.
      IF sy-subrc NE 0.
      ENDIF.

  • How to send PR & PO data for materials through IDOC in XML

    Hi Experts,
    I am looking for a solution to send open PR & open PO related data for diffrent materials through as IDCO in XML file.
    Scenario is i have to show a report in a 3rd party system for open PR & open PR that too will come after selection some materials. That means select a materials & it will show all the open PO & related data in a report.
    The rough idea for the solution i got is I can save the data in XML file in the system. For this i have to send IDOC. but the problem is there is no message type for PR. IF i am not wrong i can extend the MATMAS05 for a segment that will have PR related info.
    Now what to do with that how to send the IDOC do i need to create another report to send IDOC or i can send the extended one through BD10. I tried it but it shows error message "0 communication idoc sent" so I dont no y such error is coming i think i am not filling the extended idoc. But again my QUestion is how to do that. If anyone have any other solution Please help me out of this.
    Regards,
    Nik

    Hi Alpesh,
    Thanks for your reply.
    My requirement is bit different. i have to send Open PR data for diffrent materials. In a 3rd party application user will search for few materials which will generate a report that will show the PR related data for those material.
    Same thing i have to do for PO & Sales order also.
    Can u please help me to provide the solution how can i proceed for it. U have given the Message type & a bapi how it will help in my issue?
    I got a suggesion from someone that extend message type matmas for PR, PO, SD related data & send the idoc. but i am confused how to pass that much data ina single IDOC.
    Regards,
    Nik

  • How to send the spool output to the specific user during ALE distribution

    Hi All
    In ALE internal order Configuration done by BAPI Method SAVEREPLICA Business object BUS2075whenever user changed the internal order which is moved to the destination system because of change data setting in data element fields.
    I want to know how to send the spool output of the changed internal order to the specific user during ALE distribution.
    Please help me to reslove the above issue
    Thanks & Regards
    KRISHGUNA

    Solved by myself

  • How to access the global data in user exit.

    Hi All,
    How to access the global data in user exit.
    the question is that when we were writing a code in the FM. i need to read data from the standard program like newly created documen and this document number need to be accessed in my program.
    this document number is not imported to the FM i needed to access for frther proceed.
    Thanks in advance.

    Hi,
    See the below PDF file by Jeff Goldstein. There you can find all the details about accessing data outside of the exit.
    [SAP User Exits and the People Who Love Them|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/208811b0-00b2-2910-c5ac-dd2c7c50c8e8]
    This will help you to solve your problem.
    Regards
    Karthik D
    Edited by: Karthik D on Dec 2, 2008 4:18 PM

Maybe you are looking for