How to send the type of tunnel in access-request?

Hello,
I have a PPTP/L2TP access server and two groups of clients: PPTP-only clients and L2TP-only clients.
All clients is authenticated with one Radius server.
I need to send type of tunnel (PPTP or L2TP) to Radius to distinguish these groups of clients.
Is there a way to implement this?
Thanks in advance.

Hi
There's a few potential solutions. If the users of these devices are in different ACS (or external) groups, you can create the specific tunnel type attribtes per ACS group.
Otherwise, you could defined two NAPs (with ACS 4.0) with one for each service... provided you can find some way to differentiate the two requests.
If you cant differentiate at the front or back ends... there's no solution I can think of.
Darran

Similar Messages

How to send the payload to a jsp using receiver Http adapter?

Hi experts,
I have this scenario from Legacy to XI to external app server.I have a test jsp to execute that functionality .Its a jsp which has 1 textarea named "test" and when I click on the submit buton I get a response back.This way I am able to test this independently.Now from XI when I am executing my scenario I am getting status code '1250' and message as ' http request(test) is null'.Now in the scenario in http adapter I just provide the target host : ip of server ,
service number : port no ,
path: the container or the request handler. But this scenario fails and gives me the above erroneous response.Now Basically I am not able to get how to send the value to the textarea "test"? please provide help as soon as possible.Do we have to put the name of the jsp in the "path" in http adapter and use prolog as test=.I tried this but it doesnt work.
Is there any way to check the URL that it forms after appending the querystring in the url ...?
So please provide help on this or suggest a solution to [email protected] as soon as possible.....
Thanx in advance.
Akshata

hey Shekhar,
thanx for that prompt reply but I have configured the communication channel in the same manner as suggested by u.
actually I have this jsp page http://xx.xx.xx.xx:8080/abcdef/try/efg.jsp where there is a textarea "test" which has to be filled and there is a submit button.When I test this http client i.e the above jsp page independently then it goes to handler
http://xx.xx.xx.xx:8080/abcdef/trial/ And it gives a proper response message after clicking on the submit button.
now I want to carry out the same using receiver http adapter. I need to pass the value for this inputfield names "test" on that jsp . so right now I have configyured the adapter as
addressing type: url
target host : xx.xx.xx.xx
service no:8080
path : here I have given the path of handler i.e /abcdef/trial I tried giving the jsp page also but logically I guess it should be the handler.
content type: text/xml; charset=iso-8859-1
xml code: UTF-8
Mask special characters (URL escaping) checked.
now since the name of the inputfield is "test" in the prolog I gave test=
But it doesnt work I get this error "http request parameter [test] is null" in the response message which I guess suggests that it is not able to send the value for the field"test" to that handler.Please suggest how to send this and tell me if there are any other configurations that I have to do in the receiver communication channel.
Thanx ,
Akshata

How to send the email to different email addresses from Workflow

Hello,
i an not getting that how to send the email from Workflow in SAP.
plz give the steps to do that.
i have done lots of time but system is not sending the email to different email address.

Hi,
lot of configuration is invloved in sending
mail to external email id. check BASIS to
configure for external mails ans also check
debug FM and see which conditions exceptions
(Document not sendis raised)
also check below code
CLEAR: DOC_CHNG, OBJTXT, OBJBIN, OBJPACK, OBJHEAD, RECLIST,
RECIPIENT_INT, DOC_SIZE,TAB_LINES.
REFRESH: OBJTXT, OBJBIN, OBJPACK, OBJHEAD, RECLIST.
OBJBIN[] = CONTENT_OUT[].
Populate e-mail title
DOC_CHNG-OBJ_NAME = 'MAIL'.
CONCATENATE 'EETS for Contract #'(245)
OIA01_TAB-EXGNUM
INTO DOC_CHNG-OBJ_DESCR SEPARATED BY SPACE.
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
It is a text document
CLEAR OBJPACK-TRANSF_BIN.
The document needs no header (head_num = 0)
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
but it has a body
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
of type RAW
OBJPACK-DOC_TYPE = 'RAW'.
APPEND OBJPACK.
Create the attachment (the list itself)
DESCRIBE TABLE OBJBIN LINES TAB_LINES.
It is binary document
OBJPACK-TRANSF_BIN = 'X'.
we need no header
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
but a body
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
of type PDF
OBJPACK-DOC_TYPE = 'PDF'.
OBJPACK-OBJ_NAME = 'Attachment'(239).
CONCATENATE 'EETS_' OIA01_TAB-EXGNUM '_'
IT_ZMMTACCUID-ACCTUSRID
'_' SY-DATUM '_' SY-UZEIT '.PDF'
INTO OBJPACK-OBJ_DESCR.
READ TABLE OBJBIN INDEX TAB_LINES.
DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJBIN ).
OBJPACK-DOC_SIZE = DOC_SIZE.
APPEND OBJPACK.
Get e-mail address
CLEAR IT_ADDRESS.
READ TABLE IT_ADDRESS WITH KEY ACCTID = IT_ZMMTACCUID-ACCTUSRID
BINARY SEARCH.
IF SY-SUBRC = 0.
RECIPIENT_INT-ADDRESS = IT_ADDRESS-SMTP_ADR.
ENDIF.
*Send email to external mail address
RECLIST-RECEIVER = RECIPIENT_INT.
RECLIST-REC_TYPE = 'U'.
APPEND RECLIST.
CLEAR RECLIST.
*Send email to SAP Office mail address
RECLIST-RECEIVER = IT_ZMMTACCUID-ACCTUSRID.
RECLIST-REC_TYPE = 'B'.
APPEND RECLIST.
CLEAR RECLIST.
SEND THE DOCUMENT BY CALLING THE SAPOFFICE API1 MODULE
FOR SENDING DOCUMENTS WITH ATTACHMENTS
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
exporting
document_data = doc_chng
put_in_outbox = 'X'
importing
sent_to_all = sent_to_all
tables
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
receivers = reclist
exceptions
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
others = 99.
also check
https:/Re: mail sending problem
Regards
amole

How to send the output of one step as input to next step

Hello All,
I have a question that how to send the output of the first step as the input to the next step.
for e.g
consider a test sequence as below,
1.battery ON.
2. read Voltage
3. Check battery voltage.
as initially the battery gets ON when ever the test starts. in the second step it reads the voltage. let us assume that the voltage is 11.5V,
in the third step we r checking/validating that battery voltage in the range 11V to 12 V. . I mean if the vloltage value is less than 11V or greater than 12V te test has to FAIL.
so in order to check that voltage we need to send the voltage read from the second step.
so how can I send the voltage read from the second step to the third step so that I can check the battery voltage test.
kindly suggest me this using LabVIEW/Test stand.

Hi,
Why do you need the third step, if the second step is a Numeric Limit Test step type, you can setup the limits of this step for your required limits of 11V and 12V. Your result is returned from your VI to Step.Results.Numeric which will be evaluated in the Status Expression giving you a Pass / Fail status.
Look at the example TestStand\examples\demo\..\Computer Motherboard Test\computer.seq
But to answer your reoriginal question, some additional information is required.
What are your inputs and outputs assigned to in TestStand, do you use the Step properties, Locals, FileGlobals?
Regards
Ray Farmer
Regards
Ray Farmer

How to send the report output to the application server in a excel file

Hello,
how to send the report output to the application server in a excel file.
and the report runs in background.
Thanks in advance.
Sundeep

Dear Sundeep.
I'm providing you with the following piece of code ... Its working fine for me ... hopefully it suits your requirement ...
D A T A D E C L A R A T I O N *
TYPES: BEGIN OF TY_EXCEL,
CELL_01(80) TYPE C,
CELL_02(80) TYPE C,
CELL_03(80) TYPE C,
CELL_04(80) TYPE C,
CELL_05(80) TYPE C,
CELL_06(80) TYPE C,
CELL_07(80) TYPE C,
CELL_08(80) TYPE C,
CELL_09(80) TYPE C,
CELL_10(80) TYPE C,
END OF TY_EXCEL.
DATA: IT_EXCEL TYPE STANDARD TABLE OF TY_EXCEL,
WA_EXCEL TYPE TY_EXCEL..
E V E N T : S T A R T - O F - S E L E C T I O N *
START-OF-SELECTION.
Here you populate the Internal Table.
Display - Top of the Page.
PERFORM DISPLAY_TOP_OF_PAGE.
E V E N T : E N D - O F - S E L E C T I O N *
END-OF-SELECTION.
SET PF-STATUS 'GUI_STATUS'.
E V E N T : A T U S E R - C O M M AN D *
AT USER-COMMAND.
CASE SY-UCOMM.
WHEN 'EXPORT'.
Exporting the report data to Excel.
PERFORM EXPORT_TO_EXCEL.
ENDCASE.
*& Form DISPLAY_TOP_OF_PAGE
text
--> p1 text
<-- p2 text
FORM DISPLAY_TOP_OF_PAGE .
SKIP.
WRITE: /05(128) SY-ULINE,
/05 SY-VLINE,
06(127) 'O R I C A'
CENTERED COLOR 1,
132 SY-VLINE.
WRITE: /05(128) SY-ULINE,
/05 SY-VLINE,
06(127) 'Shift Asset Depreciation - Period/Year-wise Report.'
CENTERED COLOR 4 INTENSIFIED OFF,
132 SY-VLINE.
WRITE: /05(128) SY-ULINE.
E X C E L O P E R A T I O N
CLEAR: IT_EXCEL[],
WA_EXCEL.
PERFORM APPEND_BLANK_LINE USING 1.
WA_EXCEL-cell_02 = ' XYZ Ltd. '.
APPEND WA_EXCEL TO IT_EXCEL.
CLEAR: WA_EXCEL.
WA_EXCEL-cell_02 = 'Shift Asset Depreciation - Period/Year-wise Report.'.
APPEND WA_EXCEL TO IT_EXCEL.
PERFORM APPEND_BLANK_LINE USING 1.
ENDFORM. " DISPLAY_TOP_OF_PAGE
*& Form APPEND_BLANK_LINE
text
-->P_1 text
FORM APPEND_BLANK_LINE USING P_LINE TYPE I.
DO P_LINE TIMES.
CLEAR: WA_EXCEL.
APPEND WA_EXCEL TO IT_EXCEL.
enddo.
ENDFORM.
*& Form EXPORT_TO_EXCEL
text
--> p1 text
<-- p2 text
FORM EXPORT_TO_EXCEL .
DATA: L_FILE_NAME(60) TYPE C.
Create a file name
CONCATENATE 'C:\' 'Shift_Depn_' SY-DATUM6(2) '.' SY-DATUM4(2)
'.' SY-DATUM+0(4) INTO L_FILE_NAME.
Pass the internal table (it_excel which is already populated )
to the function module for excel download.
CALL FUNCTION 'WS_EXCEL'
exporting
filename = L_FILE_NAME
tables
data = IT_EXCEL
exceptions
unknown_error = 1
others = 2.
if sy-subrc <> 0.
message e001(ymm) with 'Error in exporting to Excel.'.
endif.
ENDFORM. " EXPORT_TO_EXCEL
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
When you click the button - Export to Excel ( GUI-Status) you'll be able to export the content of the Internal Table to an Excel file .......
Regards,
Abir
Don't forget to award Points *

How to Send the material master data from sap4.6c to ECC6.0

Hi
Friends this is shalini Shah, i got one requirement that is
how to send the materail master data from SAP 4.6C to ECC6.0 using XI.
i know the file to idoc and idoc to file scenarios but i don't know this one.
please help me friends, Thanks in advance.
Regards
Shalini Shah

Hi Shalini,
To trigger IDoc these configurations should be done in the SAP 4.6, XI and ECC 6.0.
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3 (4.6 and ECC 6.0)
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
Also go ther the Blog <a href="/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi Configuration for Pushing IDOC's from SAP to XI</a> By Swaroopa Vishwanath
U need to import the IDoc types both inbound and outbound to XI.
1. Create Inbound and Outbound Message interface.
2. Do one to one message mapping.
3. Define an Interface mapping.
ID:
1. Create 1 Sender aggrement.
2. Create 1 Receiver aggrement.
3. Define 1 RD and ID.
4. Only create an receiver IDoc CC.
Regards
San
<a href="Remember to set the thread to solved when you have received a solution to set the thread to solved when you have received a solution</a>
Where There is a <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/weblogs?blog=/weblogs/topic/16">blog</a> there is a Way.

How to send the file contents in the application server to ftp server

Hi,
how to send the file contents in the application server to ftp server.
regards,
sree

Test SAP FTP functions
DATA: BEGIN OF MTAB_DATA OCCURS 0,
LINE(132) TYPE C,
END OF MTAB_DATA.
DATA: MC_PASSWORD(20) TYPE C,
MI_KEY TYPE I VALUE 26101957,
MI_PWD_LEN TYPE I,
MI_HANDLE TYPE I.
START-OF-SELECTION.
MC_PASSWORD = 'password'.
DESCRIBE FIELD MC_PASSWORD LENGTH MI_PWD_LEN.
*-- FTP_CONNECT requires an encrypted password to work
CALL 'AB_RFC_X_SCRAMBLE_STRING'
     ID 'SOURCE' FIELD MC_PASSWORD ID 'KEY' FIELD MI_KEY
     ID 'SCR' FIELD 'X' ID 'DESTINATION' FIELD MC_PASSWORD
     ID 'DSTLEN' FIELD MI_PWD_LEN.
CALL FUNCTION 'FTP_CONNECT'
     EXPORTING
       USER            = 'userid'
       PASSWORD        = MC_PASSWORD
       HOST            = 'servername'
       RFC_DESTINATION = 'SAPFTP'
     IMPORTING
       HANDLE          = MI_HANDLE
     EXCEPTIONS
       NOT_CONNECTED   = 1
       OTHERS          = 2.
CHECK SY-SUBRC = 0.
CALL FUNCTION 'FTP_COMMAND'
     EXPORTING
       HANDLE = MI_HANDLE
       COMMAND = 'dir'
     TABLES
       DATA = MTAB_DATA
     EXCEPTIONS
       TCPIP_ERROR = 1
       COMMAND_ERROR = 2
       DATA_ERROR = 3
       OTHERS = 4.
IF SY-SUBRC = 0.
LOOP AT MTAB_DATA.
    WRITE: / MTAB_DATA.
ENDLOOP.
ELSE.
do some error checking.
ENDIF.
CALL FUNCTION 'FTP_DISCONNECT'
     EXPORTING
       HANDLE = MI_HANDLE
     EXCEPTIONS
       OTHERS = 1.
Execute external commands (FTP Scripts)
The following code shows the syntax of the FM 'SXPG_COMMAND_EXECUTE'. You pass it the external command created within transaction SM69 and it will execute it.
DATA: ld_comline
LIKE sxpgcolist-name,
        ld_param    LIKE sxpgcolist-parameters,
        ld_status   LIKE extcmdexex-status,
        ld_output   LIKE btcxpm OCCURS 0 WITH HEADER LINE,
        ld_subrc    LIKE sy-subrc.
REFRESH ld_output.
MOVE 'FTP_DATA_IN' to ld_comline.         "Maintained using trans SM69
Execute external command, contained in 'ld_comline'
CALL FUNCTION 'SXPG_COMMAND_EXECUTE'
       EXPORTING
            commandname                   = ld_comline
          additional_parameters   = ld_param "Params passed to script
          operatingsystem
= 'UNIX'
       IMPORTING
            status                        = ld_status
       TABLES
            exec_protocol                 = ld_output
       EXCEPTIONS
            no_permission
                 = 1
            command_not_found
             = 2
            parameters_too_long
= 3
            security_risk
= 4
            wrong_check_call_interface    = 5
            program_start_error           = 6
            program_termination_error     = 7
            x_error                       = 8
            parameter_expected            = 9
            too_many_parameters           = 10
            illegal_command               = 11
            wrong_asynchronous_parameters = 12
            cant_enq_tbtco_entry
          = 13
            jobcount_generation_error
     = 14
            OTHERS
= 15.
IF sy-subrc NE 0.
ENDIF.

How to send the spool output to the specific user during ALE distribution

Hi All
In ALE internal order Configuration done by BAPI Method SAVEREPLICA Business object BUS2075whenever user changed the internal order which is moved to the destination system because of change data setting in data element fields.
I want to know how to send the spool output of the changed internal order to the specific user during ALE distribution.
Please help me to reslove the above issue
Thanks & Regards
KRISHGUNA

Solved by myself

How to send the ALV GRID output to spool by using the print button in std t

How to send the ALV GRID output to spool by using the print button in standard tool bar.
We have created a button in the va02 transaction. If user click on the button the new screen will be display on that screen we are populating the alv grid output using the oops concept. But i am unable to send the output to spool using the print button in the standard tool bar.
I am able to display the Print parameter dialog box but i am not able to send it to spool.
Kindly help.
Thanks In Advance.
G.V.Ramana

Hi Shaik,
There is not properties button in my print screen.
MODULE user_command_0900 INPUT.
    WHEN 'EXCEL'.
      PERFORM excel_download.
    WHEN 'PRI'.
      PERFORM print_output.
form Print_output.
CALL FUNCTION 'RSPO_LIST_LAYOUT_FITS'
           EXPORTING
                columns        = 80
                device         = 'ANY '
                lines          = 65
                maxpenality    = 1999
           TABLES
                layouts        = lt_layouts1
           EXCEPTIONS
                unknown_device = 1
                OTHERS         = 2.
      IF sy-subrc = 0.
        LOOP AT lt_layouts1.
          IF lt_layouts1-penality < 1000        AND
             lt_layouts1-penality < l_min_penality.
            l_layout       = lt_layouts1-layout.
            l_min_penality = lt_layouts1-penality.
          ENDIF.
        ENDLOOP.
        IF NOT l_layout IS INITIAL.
          CALL FUNCTION 'GET_PRINT_PARAMETERS'
               EXPORTING
                    mode                   = 'CURRENT'
                    line_size              = 80             "#EC *
            new_list_id            = l_new_list_id
                    no_dialog              = l_no_dialog
                    layout                 = l_layout
               IMPORTING
                    out_archive_parameters = rs_arc_params
                    out_parameters         = rs_pri_params
                    valid                  = l_valid
               EXCEPTIONS
                    archive_info_not_found = 1
                    invalid_print_params   = 2
                    invalid_archive_params = 3
                    OTHERS                 = 4.
          IF sy-subrc NE 0.                                 " INS SLIN
          ENDIF.                                            " INS SLIN
          IF rs_pri_params-linsz LT 80 OR
             rs_pri_params-linsz LT gt_stack-s_lprint-width.
            gt_stack-print_line_break = 'X'.
          ELSE.
            CLEAR gt_stack-print_line_break.
          ENDIF.
          IF l_valid NE 'X'.
            rs_pri_params = ls_pri_params_sav.
            rs_arc_params = ls_arc_params_sav.
          ENDIF.
        ENDIF.
      ENDIF.
endform.                    " Print_output
    CALL METHOD gv_cost_tot_alv_grand->set_table_for_first_display
            EXPORTING
               is_layout         = gs_layout_cost_tot_grand
            CHANGING
               it_fieldcatalog   = gt_fcat_cost_tot_grand[]
               it_outtab         = gt_cost_tot_grand[].
Please check my code

How to send the data from mac pc to External drive

how to send the data from mac pc to External HDD
or Pen Drive but with out deleting the preview as data

You can use "Finder", which is in your dock, to copy files from your iMac folders over to the external hard drive.
Hope this helps

How to send the output to PDF format in reports 6i?

Hi,
How to send the output to PDF format in reports 6i? I given Mode = BITMAP.
DESTYPE = File, DESFORMAT = PDF, DESNAME = C:\x.pdf.
Report is running fine. But PDF file not generated. I don't know what i missed. Any one can help this?
Thanks
Kavitha

Hello,
Do you get this problem only for DESFORMAT=PDF ?
Test with :
DESFORMAT = RTF, DESNAME = C:\x.rtf
or
DESFORMAT = HTMLCSS, DESNAME = C:\x.html
does it work ?
Check if DESNAME is modified in the reports itself.
Regards

How to send the data manually

Hi Experts,
I need small information.when messages are gone into queue state due to one message
When an EDI file came into wrong format and with that some messages are gone into queue state in MONI.
if i cancel the first message then remaining all the messages are processing successfully.
So from that cancel message i want sent the data manually as business needs that data.
Can all please tell me how to send the data manually with steps.
Thanks in Advance.
Bhaskar

Hi,
I think you are talking about QoS "EOIO", in which all messages are porcessed in FIFO order and whenever the preceeding message get stuck due to error in the queue, then all the messages are stoped. And yes as soon as you will cancel the message which went into error all the remaining messages will automatically will be delivered.
In my opinion since QoS is EOIO then it will be not possible to sent the data mannually, you can do one thing, do not cancel the message. Try to correct the messge and then resend it.
Regards,
Sarvesh

How to send the two PDF attachments into one mail

Hi Team,
I need one requirement...I have two forms ,one is cover sheet and another one is form data. These two forms are converted into two PDF documents and sent to vendor as mail attachments...
Please suggest me, how to send the two attachments through one mail .....
Thanks & Regards,
Samantula.

Please SEARCH in SCN before posting. There are lots of threads related to send mail with multiple attachments.

How to send the Adobe page as mail attachement from webdynpro...

Hi Experts,
How to send the Adobe page as external mail attachment from webdynpro automatically (for example: If I input the data for sales order in a view and created the sales order, if the sales order is created then have to place the created sales order number and the some details in a adobe form and should send as external mail and have to specifying the body as "Sales order created and details can be found in the attached adobe form" from webdynpro).
Do the needful.
Thanks & regards,
Ravi.

Hi ravi,
See the WDA forum for the how to attach a file in webdynpro component for the attachments.

How to identify the type of pocketpc barcode scanner?

How to identify the type of pocketpc barcode scanner whteher it is intermec or symbol?
GS

Hi,
well, this is the brand of the PDA - the Scanner itself is build into the device. So if you have an intermec device - you have an intermec scanner and vice versa. It is not recommended to use a HP device for example with an external scanner. This scenario is not really supported by the MI setup guides.
Hope that helps!
Regards,
Oliver

How to send the type of tunnel in access-request?

Similar Messages

Maybe you are looking for