How to send the username logged in to a URL

Hi everyboy!
I have a question about ORacle Portal version 10
I have created a portlet which contains a page, in this page have several URL. This URL can be jsp, asp, etc.
Do you know how to send the username to the URL?,
I want to send the username in a parameter.
Is it necessary create an omniportlet?
How do I must do?
I expect your prompt reply, any help will be very appreciated.
Thank you in advance.
Best Regards

Hi Angrydot
Thank you for helped me,
But I want that the username be stored in a parameter and this parameter must be sent by method post.
In the oracle portal when I created the URL I only want to write only url, without writting ?variableusername=valuevariableusername.
How do I must create this variable?
Any help will be very appreciated.
Best Regards

Similar Messages

  • How do i send the username and password to yahoo web page through url

    how do i send the username and password to yahoo web page through url i.e as Query string so that my account in yahoo will open...

    If you don't mind using a library, then download and use the Apache HttpClient library. It takes care of all these details for you.

  • How to send a job log/Spool once the job completed?

    Could you please help me how to send a job log/Spool once the job completed.
    There was an option is available System Send mail to send a mail once the job completed . So could you please help me how we can send a job log using this option .
    I have tried the below but i didn't get any mail . Could some one help this please !
    For example :
    Job chain name : Test_spool
                    Step1 : Reportstep
                                    Job definition u2013 XXX_YYY
                    Step2:  Mailstep
                                    Job definition: system_mail_send
    Expression :  Reportstep,job<(what i need to mention here )>:reportstep/log.txt
    Check the ablove mentioned is correct and correct me , still i didnu2019t get the log in the mail please .
    Thanks
    Ramkumar

    Hi Ram,
    I need your help on getting mail alert with  log file.
    here is how i have provide the parameter valure for job definition: system_mail_sent.
    Step1 with one job1 and step2 with one job1
    In step2 , i have included the job definition to send mail. with below parameter.
    Relative Job: Step 1, Job 1
    Job File: step 1, job 1: step 1/log.txt
    Please let me  know if the above method is correct or not.
    NOTE: mail server and from address are configured.
    Thanks,
    Karthik

  • How to get the current logged in username from windows and put it into an AS var

    Hello,
    I was hopeing someone would know how to get the current logged in username from windows and put it into a var, so I can create a dynamic text box to display it.
    Thanks in advance
    Michael

    Just for everyone’s info, this is the script I have used to get the logged in windows username into flash ---- not and air app.
    In the html page that publishes with the .swf file under the <head> section:-
    <script language="JavaScript" type="text/javascript">
    function findUserName() {
         var wshell=new ActiveXObject ("wscript.shell");
         var username=wshell.ExpandEnvironmentStrings("%username%");
         return username;
    </script>
    The ActionScript:-
    import flash.external.ExternalInterface;
    var username:String = ExternalInterface.call ("findUserName");
    trace (username); // a quick test to see it in output

  • How to get the job logs from sm35 by using the queue id and session name?

    hi all,
    can any one please let me know how to read the job log from sm35 by using the session name and queue id. i have the job name and job count but is it possible to download the job log by using the queue id and session name.
    FYI..
    i want to read this job log and i want to send it to an email id.
    -> i am using the job_open and submitting the zreport via job name and job count and then i am using the function module  job_close.
    but this is not working in my scenario i have the queue id and session name by using this two i want to get the job log is there any function module available or code please provide me some inputs.
    thanks in advance,
    koushik

    Hi Bharath,
    If you want to download it to the local file then you can follow the instructions in the below link.
    How to download Batch Input Session Log?
    Regards,
    Sachin

  • Hi, I recently changed my username for my iTunes/iCloud account. Can anyone tell me how i change the username on my iCloud iPad? When I go onto setting to change it it keeps the username grey so I can't even select it?

    Hi, I recently changed my username for my iTunes/iCloud account. Can anyone tell me how i change the username on my iCloud iPad? When I go onto setting to change it it keeps the username grey so I can't even select it?

    Welcome to the Apple Community.
    In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
    Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
    In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
    In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > iTunes & App store, scroll down and tap your ID)
    If you are using iMessages or FaceTime, you will also need to log out and into your ID there too.

  • HT5312 how to send the rescue email

    i cant figure out how to send the rescue email.

    If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then go to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address - if it doesn't show then you don't have a rescue email address.
    If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then see if this user tip helps : https://discussions.apple.com/docs/DOC-4551
    e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then try Apple ID Account Security
    or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57

  • How soon will the website log off

    Hi....
    Greetings........
    How soon will the website log the user off, the application in case of no user activity ie the application is not use for long time?
    so I want to know 1. how long the application(may be dashboard) is Idle
    2. Is there any option to change the default log off time
    Thanks in advance
    Balaa

    You need to be a bit more resourceful, you can't expect people to do everything for you. I don't know which websites your company blocks so I am not going to list all the language translators on the web to see which ones are and which ones are not. Ask a friend to visit the page and send a screen shot, visit the page from internet cafe or from your home internet connection. There are tons of ways to do it...

  • How to send the spool output to the specific user during ALE distribution

    Hi All
    In ALE internal order Configuration done by BAPI Method SAVEREPLICA Business object BUS2075whenever user changed the internal order which is moved to the destination system because of change data setting in data element fields.
    I want to know how to send the spool output of the changed internal order to the specific user during ALE distribution.
    Please help me to reslove the above issue
    Thanks & Regards
    KRISHGUNA

    Solved by myself

  • How to send the ALV GRID output to spool by using the print button in std t

    How to send the ALV GRID output to spool by using the print button in standard tool bar.
    We have created a button in the va02 transaction.  If user click on the button the new screen will be display on that screen we are populating the alv grid output using the oops concept.  But i am unable to send the output to spool using the print button in the standard tool bar.
    I am able to display the Print parameter dialog box but i am not able to send it to spool.
    Kindly help.
    Thanks In Advance.
    G.V.Ramana

    Hi Shaik,
    There is not properties button in my print screen.
    MODULE user_command_0900 INPUT.
        WHEN 'EXCEL'.
          PERFORM excel_download.                              
        WHEN 'PRI'.
          PERFORM print_output.
    form Print_output.
    CALL FUNCTION 'RSPO_LIST_LAYOUT_FITS'
               EXPORTING
                    columns        = 80
                    device         = 'ANY '
                    lines          = 65
                    maxpenality    = 1999
               TABLES
                    layouts        = lt_layouts1
               EXCEPTIONS
                    unknown_device = 1
                    OTHERS         = 2.
          IF sy-subrc = 0.
            LOOP AT lt_layouts1.
              IF lt_layouts1-penality < 1000        AND
                 lt_layouts1-penality < l_min_penality.
                l_layout       = lt_layouts1-layout.
                l_min_penality = lt_layouts1-penality.
              ENDIF.
            ENDLOOP.
            IF NOT l_layout IS INITIAL.
              CALL FUNCTION 'GET_PRINT_PARAMETERS'
                   EXPORTING
                        mode                   = 'CURRENT'
                        line_size              = 80             "#EC *
                new_list_id            = l_new_list_id
                        no_dialog              = l_no_dialog
                        layout                 = l_layout
                   IMPORTING
                        out_archive_parameters = rs_arc_params
                        out_parameters         = rs_pri_params
                        valid                  = l_valid
                   EXCEPTIONS
                        archive_info_not_found = 1
                        invalid_print_params   = 2
                        invalid_archive_params = 3
                        OTHERS                 = 4.
              IF sy-subrc NE 0.                                 " INS SLIN
              ENDIF.                                            " INS SLIN
              IF rs_pri_params-linsz LT 80 OR
                 rs_pri_params-linsz LT gt_stack-s_lprint-width.
                gt_stack-print_line_break = 'X'.
              ELSE.
                CLEAR gt_stack-print_line_break.
              ENDIF.
              IF l_valid NE 'X'.
                rs_pri_params = ls_pri_params_sav.
                rs_arc_params = ls_arc_params_sav.
              ENDIF.
            ENDIF.
          ENDIF.
    endform.                    " Print_output
        CALL METHOD gv_cost_tot_alv_grand->set_table_for_first_display
                EXPORTING
                   is_layout         = gs_layout_cost_tot_grand
                CHANGING
                   it_fieldcatalog   = gt_fcat_cost_tot_grand[]
                   it_outtab         = gt_cost_tot_grand[].
    Please check my code

  • How to use the change log in ODS to track Delta change?

    People say that historical data (like Delta change) in ODS can be tracked in the Change Log.  How to use the change log to track historic data?
    Thanks

    Kevin
    See if it helps
    Every ODS object is represented on the database by three transparent tables:
    Active data: A table containing the active data (A table)
    Activation queue: For saving ODS data records that are to be updated but that have not yet been activated. The data is deleted after the records have been activated.
    <b>Change log: Contains the change history for delta updating from the ODS Object into other data targets, such as ODS Objects or InfoCubes for example.</b>
    An exception is the transactional ODS object, which is only made up of the active data table.
    The tables containing active data are constructed according to the ODS object definition, meaning that key fields and data fields are specified when the ODS object is defined. Activation queue and change log are the same in the table’s structure. They have the request ID, package ID and the record number as a key.
    Data base structure changes
    http://help.sap.com/saphelp_nw04/helpdata/en/d2/d53ec3efdc9b47a9502c3a4565320c/frameset.htm
    Hope this helps
    Thnaks
    Sat

  • *HOW TO DELETE THE ARCHIVE LOGS ON THE STANDBY*

    HOW TO DELETE THE ARCHIVE LOGS ON THE STANDBY
    I have set the RMAN CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON STANDBY; on my physical standby server.
    My archivelog files are not deleted on standby.
    I have set the CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default on the Primary server.
    I've checked the archivelogs with the FRA and they are not beign deleted on the STANDBY. Do I have to do something for the configuation to take effect? Like run a RMAN backup?
    I've done a lot ofresearch and i'm getting mixed answers. Please help. Thanks in advanced.
    J

    Setting the Policy will not delete the Archive logs on the Standby. ( I found a thread where the Data Guard product manager says "The deletion policy on both sides will do what you want" ). However I still
    like to clean them off with RMAN.
    I would use RMAN to delete them so that it can use that Policy are you are protected in case of Gap, transport issue etc.
    There are many ways to do this. You can simply run RMAN and have it clean out the Archive.
    Example :
    #!/bin/bash
    # Name: db_rman_arch_standby.sh
    # Purpose: Database rman backup
    # Usage : db_rman_arch_standby <DBNAME>
    if [ "$1" ]
    then DBNAME=$1
    else
    echo "basename $0 : Syntax error : use . db_rman_full <DBNAME> "
    exit 1
    fi
    . /u01/app/oracle/dba_tool/env/${DBNAME}.env
    echo ${DBNAME}
    MAILHEADER="Archive_cleanup_on_STANDBY_${DBNAME}"
    echo "Starting RMAN..."
    $ORACLE_HOME/bin/rman target / catalog <user>/<password>@<catalog> << EOF
    delete noprompt ARCHIVELOG UNTIL TIME 'SYSDATE-8';
    exit
    EOF
    echo `date`
    echo
    echo 'End of archive cleanup on STANDBY'
    mailx -s ${MAILHEADER} $MAILTO < /tmp/rmandbarchstandby.out
    # End of ScriptThis uses ( calls an ENV) so the crontab has an environment.
    Example ( STANDBY.env )
    ORACLE_BASE=/u01/app/oracle
    ULIMIT=unlimited
    ORACLE_SID=STANDBY
    ORACLE_HOME=$ORACLE_BASE/product/11.2.0.2
    ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data
    LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
    LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib
    LIBPATH=$LD_LIBRARY_PATH:/usr/lib
    TNS_ADMIN=$ORACLE_HOME/network/admin
    PATH=$ORACLE_HOME/bin:$ORACLE_BASE/dba_tool/bin:/bin:/usr/bin:/usr/ccs/bin:/etc:/usr/sbin:/usr/ucb:$HOME/bin:/usr/bin/X11:/sbin:/usr/lbin:/GNU/bin/make:/u01/app/oracle/dba_tool/bin:/home/oracle/utils/SCRIPTS:/usr/local/bin:.
    #export TERM=linux=80x25 wrong wrong wrong wrong wrong
    export TERM=vt100
    export ORACLE_BASE ORACLE_SID ORACLE_TERM ULIMIT
    export ORACLE_HOME
    export LIBPATH LD_LIBRARY_PATH ORA_NLS33
    export TNS_ADMIN
    export PATH
    export MAILTO=?? your email hereNote use the env command in Unix to get you settings.
    There are probably ten other/better ways to do this, but this works.
    other options ( you decide )
    Configure RMAN to purge archivelogs after applied on standby [ID 728053.1]
    http://www.oracle.com/technetwork/database/features/availability/rman-dataguard-10g-wp-1-129486.pdf
    Maintenance Of Archivelogs On Standby Databases [ID 464668.1]
    Tip I don't care myself but in some of the other forums people seem to mind if you use all caps in the subject. They say it shouting. My take is if somebody is shouting at me I'm probably going to just move away.
    Best Regards
    mseberg
    Edited by: mseberg on May 8, 2012 11:53 AM
    Edited by: mseberg on May 8, 2012 11:56 AM

  • *** How to get the username in a custom password change routine....

    How to get the username in a custom password change routine / procedure / form when a user's password has expired and is redirected automatically to this custom program?
    We use the 2nd parameter in LOGIN_URL column in WWSSO_LS_CONFIGURATION_INFO$ table to get to this custom change-password proc.

    OK !
    Use that maybe good :
    select USERID into v_user from sys.aud$
      where ntimestamp#=(
      select max(ntimestamp#)
      from sys.aud$ );

  • How to send the data from mac pc to External drive

    how to send the data from mac pc to External HDD
    or Pen Drive but with out deleting the preview as data

    You can use "Finder", which is in your dock, to copy files from your iMac folders over to the external hard drive.
    Hope this helps

  • How to send the payload to a jsp using receiver Http adapter?

    Hi experts,
    I have this scenario from Legacy to XI to external app server.I have a test jsp to execute that functionality .Its a jsp which has 1 textarea named "test" and when I click on the submit buton I get a response back.This way I am able to test this independently.Now from XI when I am executing my scenario I am getting status code '1250' and message as ' http request(test) is null'.Now in the scenario in http adapter I just provide the target host : ip of server ,
    service number : port no ,
    path: the container or the request handler. But this scenario fails and gives me the above erroneous response.Now Basically I am not able to get how to send the value to the textarea "test"? please provide help as soon as possible.Do we have to put the name of the jsp in the "path" in http adapter and use prolog as test=.I tried this but it doesnt work.
    Is there any way to check the URL that it forms after appending the querystring in the url ...?
    So please provide help on this or suggest a solution to [email protected] as soon as possible.....
    Thanx in advance.
    Akshata

    hey Shekhar,
    thanx for that prompt reply but I have configured the communication channel in the same manner as suggested by u.
    actually I have this jsp page http://xx.xx.xx.xx:8080/abcdef/try/efg.jsp where there is a textarea "test" which has to be filled and there is a submit button.When I test this http client i.e the above jsp page independently then it goes to handler
    http://xx.xx.xx.xx:8080/abcdef/trial/    And it gives a proper response message after clicking on the submit button.
    now I want to carry out the same using receiver http adapter. I need to pass the value for this inputfield names "test" on that jsp . so right now I have configyured the adapter as
    addressing type: url
    target host : xx.xx.xx.xx
    service no:8080
    path : here I have given the path of handler i.e /abcdef/trial I tried giving the jsp page also but logically I guess it should be the handler.
    content type: text/xml; charset=iso-8859-1
    xml code: UTF-8
    Mask special characters (URL escaping) checked.
    now since the name of the inputfield is "test" in the prolog I gave test=
    But it doesnt work I get this error "http request parameter [test] is null" in the response message  which I guess suggests that it is not able to send the value for the field"test" to that handler.Please suggest how to send this and tell me if there are any other configurations that I have to do in the receiver communication channel.
    Thanx ,
    Akshata

Maybe you are looking for