How to send two different IDocs to SAP without BPM

Hi Experts,
I am working on jms to IDoc scneario,my requirement is to convert one JMS messge in to 2 IDocs(DELVRY,MATMAS) to ECC , i searched in SDN to achieve this requirement without BPM, i found one blog,but its saying its not possible to use multi mapping scenarios with out BPM in IDoc
what is the best approch to achieve my requirement without BPM.
Regards,
James

is it true that multi mapping not going to support IDoc scenarios??
Yes it is true that IDOC does not support multi-mapping....this can be proved if you look into the help section which shows the list of adapters supporting multimapping....IDOC is missing from that list....do not get confused between Idoc Multimapping and IDOC Bundling.....IDOC bundling means bundling IDOCs of same type...however you are looking for IDOCs of different types.
Regards,
Abhishek.

Similar Messages

How to send big message one bye one without bpm in PI 7.0

Hi frnds,
I have to send a big messages one by one to the CRM, without using BPM.
Can you please suggest us some way around, the data is going to CRM via proxy and at the sender side we are using file content conversion which we don't want to change.
Please let me know some better idea and if possible some related example as well.
Thanks,
Raj

Hi,
You have two options
1)Split the message and then send
2)Use Record set per message option in File Sender adapter,there give value 20 or any number..then it takes 20 records at a time will send to receiver.
BPM is not option,even if you use BPM ,its not going to solve your problem..
Regards,
Raj

Sending 2 different idoc

Hi All,
I have a scenario with BPM where i need to receive two different idoc. In this when I trigger from SAP one by one IDOC1 and IDOC2 it is executing properly but in case if I use transaction WE14 it is getting stucked in the loop step in BPM and it is not coming out. Actually the condition of the loop is infinite but designed a block in such a way this it receive IDOC2 we need to receive IDOC1. I used the same way in standard pattern in software component SAP BASIS in which http://sap.com/xi/XI/System/Patterns in that Integration process BpmPatternCollectMessage.
Please help me out how to solve this problem
Regards,
Dhil

Hi jai,
I am triggering the IDOC by using WE14 by giving multiple idocs. Here if totally there 10 idocs, the 10th idoc will be IDOC2 and the rest are IDOC1. Yes i am using the option trigger immediately only.. please comment
Regards,
Senthil.

BPM could be trigger for two different IDocs

Hi Gurus!!
Can I configure a BPM to be triggered by one of two different IDocs? I explain my scenario to clarify the question.
I have a requirement to do several actions with the IDoc Types MATMAS05 (Material) and CLFMAS02 (Material Characteristics).
To do these actions I use BPM, but I have several scenarios: receive MATMAS05 and CLFMAS02, receive only MATMAS05 or receive only CLFMAS02.
I need to configure the BPM to be triggered by MATMAS05 or CLFMAS02, somebody could guide me, please?
I have read something about a receiver determination step on the BPM.
Thanks and regards,
Manuel.

Hi All,
I am also facing same problem. I want to create material using IDOC and characteristics value. Don't know how to proceed.
Can any body explain in detail if possible with example code.
Thanks and full points in advance.

How to add two different page numbers in a single page

How to add two different page numbers in a single page? One is for page number of the whole article, the other one is for page number for each chapter in the article.

It's quite complicated, see
Two Page Numbering Schemes in the Same Document.
Regards, Hans Vogelaar (http://www.eileenslounge.com)

How to call two different servlet-url in the same application

Hi,
I want to call, consecutively these methods in my application.
response.sendRedirect(servlet-url1)
reponse.sendRedirect(servlet-url2)
but the second method dont answer,
I think, the first method redirect s with response ,
but how to call two different servlet ?
thanks

if you call the first redirect, the servlet is getting aborted, so you can redirect to the first servlet, working the stuff in it, and then in the second servlet you can redirect to the third servlet

How to Maintain two different prices for same material in different qty?

Dear all,
How to maintain two different prices for same material in different batch quantities in purchase order(ie.,info record)?
(Vendor is supplying quantities in 2 different batches & also in different prices)
Expecting valuable reply.
Jeyakanthan

In a PO you can create 2 items, and each item can be maintained with a different price in the conditions.
In info record it is not possible to have different prices for the same period, except for scales.
so if you have a price of e.g. 2 USD for 1000 kg and 1,90 USD for 2000 kg then you can maintain this in scales, but you still have to have 2 items in the PO so that each one can individually find its price.
Alternative you can create contracts (as well with more than one item) to reflect the different prices and batches.

How to place two different indesign documents side by side on my desktop in order to copy and paste images and text from one to the other?

How to place two different indesign documents side by side on my desktop in order to copy and paste images and text from one to the other?

Or choose Window > Arrange > Tile
And, you of course can copy/paste without tiling.

How to merge two different images in photoshop?

I am new here. I am starting to learn photoshop.How to merge two different images in photoshop? Please guide me. Thankyou.
http://www.nissiinfotech.com/

SPAM

How to change two different iCloud account from mac and iPhone?

How to change two different iCloud account from mac and iPhone?

Pick one to use, abandon the other.

How to put two pictures side by side without loosing the size?

how to put two pictures side by side without loosing the size? I did create a new canvas and double the size but my pictures are smaller in the new canvas please help meeeeeeee!!! my pictures are High13.6 and wide 20.533 with a resolution 240 im working on photoshop cs3 or cs6

Are you trying to print two pictures on the same sheet of paper? If so, then use Picture Package in CS3 (it is not part of CS6 unfortunately)
http://voices.yahoo.com/using-adobe-photoshop-picture-package-great-digital-614329.html

Issues with creating and sending BOM XML IDOC to SAP using 2010 WCF-SAP Adapter (without using Biztalk Server)

I'm trying to replace an existing Biztalk 2006 Send BOM IDOC process, and completely remove Biztalk server from the equation. The existing Bizatalk 2006 server receives an input BOM (Bill of Materials) flat file, and using a Biztalk Map (BM08),
and Orchestration, generates an Idoc and sends it to SAP.
In my replacement C# program, I'm using the 2010 WCF-SAP Adapter, and am trying to generate the BOMMAT03 XML IDOC it to SAP.
I generated the BOMMAT03 schema from SAP using the Add Adapter Service in VS 2010. I was able to generate a BM08 XSLT from the existing BMO8 map in the current Biztalk 2006 process. I am able to run a XSLT transform on the input BOM flat
file, and generate an XML file from that.
However, I've run into a few issues. First of which, is that the XML file that is generated from the XSLT transform is NOT the same schema as the BOMMAT03 schema expects. It's somewhat similar, but different enough that I have to manually
translate between the two in my code. I've verified that both the original Bitztalk 2006 process and my replacement program use BOMMAT V3 from SAP. Question--Is Biztalk 2006 server doing some other magic to turn that transormed XML into the BOMMAT03
schema?
I ended writing code which translates the transformed XML into the BOMMAT03 schema (which is a strong typed XML IDOC at this point).
However, when I try to send the BOMMAT03 XML IDOC, I get an exception "Object reference not set to an instance of an object."
idocClient.Send(idocData, ref sadapterTxGuid);
idocData is of type BOMMAT03, and I've verified that the various fields are populated.
Any help is appreciated.

Well, putting in a MSDN subscription support ticket for Biztalk server actually helped with the issue. They didn't find, or fix the issue directly. But one of the examples (https://randypaulo.wordpress.com/tag/idoc/) they sent over, jogged my
memory, and I realized in the code snippet below, I had accidentally deleted the 1st line. Such a simple mistake, yet was easy to overlook. The URL example is almost EXACTLY like my code, but without the transform and translation code to convert
from input XML file to IDOC XML. If someone is interested in that, let me know.
//Forgot the 1st line.
idocClient = new IdocBOMMAT03SIEIS_WED_BOMMAT03V3R700Client(binding, endpointAddress);
idocClient.Send(idocData, ref sadapterTxGuid);
For anyone else interested in knowing, you CAN send a strongly typed IDOC to SAP using C#.NET and the WCF SAP 2010 Adapter, using the IDOC Binding Client class you generated using the Add Adapter Service Reference in VS2010.
The one difference, which no one, not even the tech support from MS could tell me, was why the XSLT which I generated from the original map, did not transform the input BOM XML into the BOMMAT03 XML. Instead, it transformed it into an intermediate
XML, which resembled the BOMMAT03 IDOC XML, but still needed to be translated to the BOMMAT03 IDOC format.
The tech support person swore up and down that it should. But I believe that something happens in Biztalk server, after the Mapping occurs, maybe in the Pipeline, which converts that
intermediate XML into the final BOMMAT03 IDOC XML format.
I do think that the examples are severely lacking in showing how to send a strong typed IDOC using C# and the WCF-SAP Adapter. Even worse, the examples are completely lacking in how to actually generate a weakly typed IDOC. They show how to send
that weakly typed IDOC, but show me, or give me a class to be able to generate it.
I realize that this is not quite the "recommended way" to do it, but in reality, not everyone wants or even needs a full Biztalk installation. For some simple stuff like this, a C#.NET program and WCF-SAP adapter do the trick.

How to upload two different asset values for Book & Tax Depre in FA

Hello all
kindly let me know how to resolve a situation where we have different methods of calculating Depreciation. For Example SLM for Book Depreciation and Diminishing method for Tax Depreciation.
To calculate depreciation we use straight line method for book depreciation and diminishing value method for Tax depreciation. In this case, we have 2 different asset values to calculate book and tax depreciation.
Since SAP allows to upload only one asset value (Gross book value), I get correct book depreciation value but incorrect value for tax depreciation as the tax depreciation is calculated based on gross book value instead of net book value (gross book value less accumulated depreciation value).
For Eg
FOR THE FIRST YEAR
BOOK DEPRECIATION:
Asset Value = 1000
Depreciation Method : SLM
Depreciation rate is 10%
Depreciation Amount = 100
TAX DEPRECIATION:
Asset Value = 1000
Depreciation Method : DIMINISHING METHOD
Depreciation rate is 15%
Depreciation Amount = 150
FOR THE SECOND YEAR
BOOK DEPRECIATION:
Asset Value = 1000
Depreciation Method : SLM
Depreciation rate is 10%
Depreciation Amount = 100
TAX DEPRECIATION:
Asset Value = 850
Depreciation Method : DIMINISHING METHOD
Depreciation rate is 15%
Depreciation Amount = 127.5
KINDLY LET ME KNOW HOW TO UPLOAD THE PAST DATA WITH TWO DIFFERENT ASSET VALUES (IE 1000 & 850) FOR THE ABOVE.
Regards
Sushil Yadav

Hi K,
I'm having the same problem...did you find a solution yet?
Greets,
Martin.

How to send a Material Idoc in format XML to SQL Server DB?

Hi,
I am creating a Material Idoc in format XML and I need send the same to a SQL Server DB.
In the transaction BD10 I create the XML Idoc, but the same is stored in the SAP Server and I need send this to an external SQL Server DB.
Somebody knows how to send automatically the XML Idoc to a SQL Server DB?
Thanks and regards!
Edited by: marcosap on Nov 11, 2010 4:00 PM

Hi,
All your XML idoc will get store in App layer,you can ask your Unix expert to write the unix code to fetch these XML idoc files and transfer to destination based on time period set by conjob.
This is simple & easy job for any UNIX expert.
Regards
Siva

How to add two different database connections on Model

Hi,
In my application, I need to create View Objects on different databases. So I need to add two different database connections on the Model.
But it seems like Model can be connected to only one database. I tried adding another project to add the second db connection. But after I created a read-only View Object in the second project, it didn't generate corresponding data control in the Data Controls panel.
Could anyone help me on this?
Thanks!

Do you mean adding the second project folder in ViewController->Project Properties->Libraries and Classpath?Yes, either that or: ViewController -> Project Properties -> Dependencies
And I didn't see the first Model project in the ViewController classpath. Otherwise it wouldn't work. The first model project IS in 'classpath'. Here's how:
ViewController -> Project Properties -> Dependencies
I tried this and recreated the View Object. Still didn't generate the datacontrol. No idea why you had to recreate the VO.
Is your VO in an application module inside the SECOND project?
After you are sure that everything is in the ViewController's classpath, just try restarting JDeveloper.
This is very basic. has to work.

How to send two different IDocs to SAP without BPM

Similar Messages

Maybe you are looking for