How to send Video from Premiere to Encore via Dynamic Link

Hi there.  So I have the adobe suite for students, and I have a project in Premiere Pro, that I would like to make into a DVD.  I have exported before with MPEG-2 DVD, but that takes a lot of time and energy, and I don't think the export is as good as it could be (quality-wise).  So I would like to use Dynamic Link between Premiere and Encore, but when I go to File-Adobe Dynamic Link- the Dynamic link option is greyed out and I can't click on it which would let me choose "Send to Encore".  How can I make this option not greyed out and send it to Encore?  Thank you so much for your time!

As the source is HD, then the output should be 16:9 widescreen, but you listed it as 4:3.
In AME, choose "MPEG-2 DVD" and then "NTSC DV Wide Progressive" preset.
Besides bitrate, generally don't touch other sliders unless you are experienced, use defaults.
You CAN use the "Max Render Quality" checkbox at the bottom, as that helps with the downscale quality.
While DVDs can theoretically handle a max data rate of roughly 10Mbps (video and audio together), not a good idea to push that limit - as mentioned previously, some players may choke on playback with burned media. Most users have stick to a maximum of 7 or 8 for the video encoding, and then use Dolby audio (Encore will automatically transcode PCM to Dolby).
For longer videos over an hour, you may need to lower the bitrate to fit the material on the DVD. 560/minutes = bitrate works pretty well, just round down a little for safety margin. Example: 560/120=4.66 so use 4.5 average and good to go!
Thanks
Jeff Pulera
Safe Harbor Computers

Similar Messages

  • Change encore timeline from premiere pro cs5 via dynamic link?

    I'm sure this has been covered before, but I can't find
    anything on dynamic link in this forum.
    I created my video in encore, and exported the sequence to encore via dynamic link.
    I then created all my menus etc. in Encore, after which I noticed a couple of glitches I wanted to change, so I went back to premiere and edited the changes.
    How do I get encore to pick up on these changes? It didn't happen automatically as I had hoped, and I don't want to have to recreate  my menu structure again in Encore.
    So, basically, how do I make a change in Premiere, and have it reflected in my Encore project without creating a new project?
    thanks,
    Andy

    I have a similar problem:
    I created a project in PremPro CS5, then used Adobe Dynamic Link which loaded into Encore
    where I created menus then saved off both PremPro and Encore.
    Today I opened each to make add some titles in PremPro, however, Dyn Link did not send them to Encore
    as I assumed it would. How do I get link to do what I have been lead to believe it will do, that is, carry
    over changes from PremPro to Encore?
    (I tried "Revert to Original" botton suggestion but Encore does not give me this option.
    Seems like a strange suggestion since I want to update not revert.)
    Details would be helpful.
    Thx

  • HT1766 How to send videos from ipad air to the cloud to free up storage space on ipad

    How do I send videos from ipad air to the cloud to free up storage space on ipad?

    I had a similar/same problem - when I deleted the video locally, it did not appear as a Cloud video.
    To solve this, I deleted it locally, signed out of iCloud, powered of the iPad, powered back on, opened videos (empty), signed back into iCloud.
    Now all my videos are present in the cloud, and none locally.
    Not a great UX though

  • Exporting video from Premiere 2 Encore... change video in Premiere... Encore does not reflect change

    Hi everyone,
    I have a good question, hopefully it's a Premiere question, but it's also an Encore question.
    First off, I have my video project, simple segments of video, that I've added to my timeline, and I've added a simple
    title to the whole thing ( entire length of videos )
    So far so good.
    So what I did was export the project to Encore, where it loaded fine, and in Encore I worked on making a simple DVD menu for the movie.
    I did about 2 hours on the DVD menu, and then saved the Encore project.
    .... then I realized that the video project in Premiere needed some tweeking, so I went back and did that.  I saved the Premiere project
    and now I'm stumped as what to do next.
    After I saved the newly tweeked Premiere project, I exported it to Encore, and of course, as I knew it would happen, Encore opened up
    a new project with none of my menu system I had made for the DVD.  Argh, now I'm very disappointed..... HOW would I go about getting
    the DVD menu to work with the newly tweeked Premiere project ?
    I'm guessing I'm doing something wrong, and that there is indeed a way to fix this.  I'm really really hoping so.
    Thanks for any help you can offer.
    Dave.

    Hi Dave, To be honest Colin's way is the correct way to do it and it has worked so you should probably do it that way. I just like to
    take the full control back so if I do make changes I like to give it another version number and then match that version number in my
    new saved Encore project taken from the original. It is also the very last thing I do as well so I just find that workflow means I
    control every asset and version but no doubt about it Colin's way is the correct method and the one that allows all
    changes within Adobe to reflect through. Cheers, Steve.

  • How can send video from my computer to apple tv

    How I can send computer' video to apple tv in order to see it on LED TV

    Figured it out!  How cool is this!
    there is an icon at the top of my laptop---a blue rectangle with a triangle pointing up...
    clicked it and was able to "turn on" air play! 
    We are set......

  • Exported HD video from Premiere Pro CS4 via Media encoder Freezes mid way through video

    Hi,
    I couldnt find this raised by anyone else so thought id start a new thread. Ive tried a couple of times to export an edited project only to find the video is all good up until roughly  half way through the video at which point the video freeezes, the time keeps moving along as if its playing but no video. It looks like the encode failed at this point. I have no problems if I split up the video and export it in smaller pieces but obviously this isnt good enough
    Any ideas as to the cause?
    Additional info:
    Im patched upto CS4.1
    Source footage is AVCHD
    Project goes for just over an hour
    Cheers

    That suggests some failure somewhere in the encoding process. It could be something in your timeline around 43 minutes, maybe a blank space (even for a single frame), a disk hiccup causing some part to go missing, other hardware problems. It could be a myriad of things going wrong. What background processes are running, what is your hardware setup, what are the temperatures during encoding, etc. Check the second part of this link: If you need help quickly...Guideline for posting an effective question

  • Merged Clips in Pr don't import into AE (or export from Pr via Dynamic Link)

    anyone else encounter this??
    Exporting ANY sequence from Premiere that contains Merged Clips to Ae via Dynamic Link results in NO clips showing up in the AE Comp.
    On the flip side, I can Import a Premiere Pro Sequence in Ae, but the only clips that do show up are NON-merged clips.  
    Here's what a simple test sequence looks like on the Pr side of things:
    And here's how it shows up in Ae when choosing Import-->Adobe Premier Pro Project  (and selecting single sequence):
    vs. the exact same sequence sent from Pr to Ae via Dynamic Link:

    Hmm..I wonder if it's Multi-Cam merged, vs just single video track and audio track merged, that is the issue.  I'll have to do some more tests.

  • Encore CS6 Dynamic Link

    I think most of the people here will agree with me. I have noticed that since upgrading to CC I have had lots of timewasting work arounds to create a Blu Ray and DVD using Encore. In the past I used to create awesome quality Blu Rays and DVD from the same Encore Project dynamically linked to PrPro. But with CC the workaround is time consuming and I don't think the Blu Ray and DVD will be going away as predicted by Adobe. As a result of this I just can't wait to terminate my CC subscription at the end of my contract this year so I can revert to CS6.

    For the record, I don't see any problem with dynamic link as long as it works. The "automatic" setting in Encore has worked fine for many people. There may have been slightly better quality options, but for many users, the quality was good. The problem has been that there have been increasing numbers of situations where it does not work correctly, including HD to SD that made it a bad workflow for almost all users.
    The belief that it saves transcoding time seems so reasonable, it is hard to realize that it does not. The savings that may occur are in workflow that avoids bitrate calculation for longer projects.
    Surkweza appears to be one of those who found workflows for SD and BD that worked. We don't hear from many.
    And yes, its moot now, since there is no dynamic link CC to CS6. So the best CC users can do is to learn to create DVD/BD ready assets at the best quality their program length will allow.
    But the bugs make the frustration of users like srukweza harder to resolve.

  • How can i send video from my iphone 4s to email

    How can i send video from my i phone 4s to an email address?

    Mail attachment size is determined by your ISP, & limit that size to betweem 10MB's & 25MB's, depending on ISP. So, unless it is a very small video, you won't be able to.

  • How do i send video from a gopro mp4 from mac to pc?

    how do i send video from a gopro mp4 from mac to pc?

    While we all have MacBooks in this forum not all of us use iMovie. There's an iMovie Support Community where everybody uses iMovie. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/ilife/imovie

  • How do I send videos from iphoto

    How do I send videos from iphoto?

    Export them to the desktop as kind = original and send form there
    LN

  • Settings from Premiere to Encore?

    Hi everyone,
    I just burned a DVD using the link from Premiere to Encore and it came out looking like crap. I have burned DVD's before and they never looked like this. It's alos taking a really long time to burn a half hour DVD. What are the settings you guys are using to make it look good? I know that going from HD video to SD on a DVD will give me some loss, but its never been this bad.
    Here is what I am working with:
    Source Format: 
    Type: MPEG Movie
    File Size: 2.6 GB
    Image Size: 1440 x 1080
    Frame Rate: 29.97
    Pixel Aspect Ratio: 1.3333
    Sequence Settings:
    Editing Mode: HDV 1080p
    Timebase: 29.97
    Frame Size: 1440x1080
    Pixel Aspect: HD Anamorphic 1080 (1.333)
    Video Previews:
    Preview File Format: I-Frame Only MPEG
    Codec: MPEG I-Frame
    Width 1440
    Height 1080
    Max Bit Depth and Max Render Quality

    I was in a hurry; did not realize it was YOU! Too funny... (Sorry about that!)
    I'm sure Jeff will join us here.
    Your sequence setting is still 1080p; did he not recommend 1080i?
    What is your latest export setting?
    The burn time is not based on the duration of the video, but how full the disk is and the burn speed.

  • YouTube - How to add videos from youtube on jsf-adf

    YouTube - How to add videos from youtube on jsf-adf.
    when i using iframe i can't send data from beans.

    you can use a <f:verbatim> tag in your page and in it just write the HTML code for embedding a video.
    and can i send data from beans class in html components?
    i wrote this
    <af:iterator id="i2" var="row"
    value="#{MyBean.src_items}"
    varStatus="st">
    <af:showDetail disclosed="false" id="sd1"
    styleClass="AFStretchWidth"
    disclosedText="#{row}">
    <f:verbatim>
    <iframe id="ifv" src="#{row}"/>
    </f:verbatim>
    </af:showDetail>
    </af:iterator>
    but that were not worked .
    Edited by: Vakhushti on May 9, 2011 12:40 PM

  • How to delete video from iTunes library? del and shift+del are not working - no any reaction

    how to delete video from iTunes library? del and shift+del are not working - no any reaction.

    seb963 wrote:
    Hi
    Currently, iMatch is turned off on my computer, as I do not want to upload any more songs. If I turn it on, will it upload all songs that are currently in my library? Is there another way that deleting them one by one?
    You must enable iTunes Match on the new computer. The best way to accomplish what you want to do is to create a new, empty library by launching iTunes while holding down the Option key (Shift on Windows) and choosing "new library." Do not let iTunes scan for new content, but do enable iTunes Match on the empty library. Once the scan is finished you may delete tracks from the cloud. When you are done switch back to the main iTunes library.

  • How to send data from internal table to the shared folder in ABAP

    Hi experts,
             My requirement is to transfer data from a file to shared folder. i just did reading data from a file to a internal table. Now i want to send this internal table data into a shared folder which is  "
    xxx\y\z....".
    I do not have any idea on how to send data from internal table to the shared folder path.
    can anybody please help me out how to do this?
    Thanks & Regards
    Sireesha.

    Where that folder is located, its on presentation server i.e. desktop or application server.
    If its on presentation server, use FM GUI_UPLOAD.
    If its on application server, then use DATASET functions. Have a look at below link.
    [File Handling in ABAP|http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3ca6358411d1829f0000e829fbfe/frameset.htm]
    I hope it helps.
    Thanks,
    Vibha
    Please mark all the useful answers

Maybe you are looking for