How to send wap push messages in java

hi,
i need to send wap push messages through smsc in java,
can any one give the idea about this,how can i start,
where can i get the jar file according this,
(either using smpp or http)
thanks and regards,
Karuna.

Uhm... I'm pretty sure you need a special server for that.

Similar Messages

  • How to send SMS ( Short Message Service ) from java code

    Hi
    How to send SMS ( Short Message Service ) from java code.
    Thanks
    Gaurav

    Do you need to receive SMS? If you need to receive SMS, you will need to host your own GSM device or modem so that people can send you SMS.
    If not, you can just use internet SMS gateways like clickatell as mentioned above will do the work, and post to them by HTTP, XML or email. The cost is about 6-8 cents per SMS. There are cheaper services, but not always reliable. If you need to host your own GSM device, you can use software like http://www.kannel.org (GPL Open Source) or http://www.visualgsm.com. Alternatively, you may obtain a shortcode from your Telco - but these come with monthly subscription of maybe one or two hundreds.
    Regards,
    Joshua
    <SMS Gateway>@Expert

  • How to send a SOAP message with attachments

    How to send a SOAP message with attachments thru webservice using axis-1_3 can any one sujjest.............................

    Please refer
    http://www.javaworld.com/javaworld/jw-09-2003/jw-0912-webservices.html
    http://xml.sys-con.com/read/40315.htm

  • How to send a text message to a group of people and save the list for next time?

    how to send a text message to a group of people and save the list for next time from an iphone 4s?

    Hey there ipremacha,
    It sounds like you need to enable Text Message Forwarding on your iPhone for your iPad to send MMS/SMS messages through your phone.
    Connect your iPhone, iPad, iPod touch, and Mac using Continuity
    Go to Messages > Text Message Forwarding, and enable the device(s) you would like to forward messages to.
    Your Mac, iPad, or iPod touch will display a code. Enter this code on your iPhone to verify the SMS feature.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • How to send HTML Format Mail using Java Mail in oracle 9i Forms

    Dear All
    could you please tell me how to send HTML Format Mail using Java Mail in oracle 9i Forms and how to implement the java mail ?
    if it is possible, could you please send me the sample code? please very urgent
    Thanks
    P.Sivaraman

    Hello,
    <p>Here is a Form sample.</p>
    Francois

  • How to send a JMS message to a server ....

    Hi
    I want to know how to send a jms message to a Queue and that is in a different server...
    How to send A message using a application client to a Message queue That is in another Machine(Server is in another machine )
    env.put(Context.INITIAL_CONTEXT_FACTORY,"com.sun.jndi.cosnaming.CNCtxFactory");
    env.put(Context.PROVIDER_URL, "iiop://127.0.0.1:3700/");
    InitialContext initialContext = new InitialContext(env);
    connectionFactory = (ConnectionFactory) initialContext.lookup("jms/ConnectionFactory");
    queue = (Queue) initialContext.lookup("jms/Queue");
    get a NameNotFoundException
    Anyone have an Idea
    thanks
    Ishkmi
    Message was edited by:
    ishkmi

    ok..try this..insert the ip address of the server where ur app server is
    running . i understand ur client and server is running on diff machines.
    ip address 127.0.0.1 is for local host. it tries to look for the server in
    same system as the client.
    substitue ip address of server in below line instead of 127.0..0.1
    env.put(Context.PROVIDER_URL, "iiop://127.0.0.1:3700/");
    best of luck ..lemme know..

  • Can anybody tell me how to send/receive  the sms from java application

    Hi All,
    Can any body tell me, how to send/receive the sms from java application to mobile phones.
    I have installed the jsms engine and when i try to connect to the mobile device ,the jsms server is giving
    the following error.
    Cannot connect to GSM Device, error : -11

    Which jsms? Google finds several.
    Try the website where you downloaded it.

  • Can any body tell me, how to send/receive the sms from java application

    Hi All,
    Can any body tell me, how to send/receive the sms from java application to mobile phones.
    I have installed the jsms engine and when i try to connect to the mobile device ,the jsms server is giving
    the following error.
    Cannot connect to GSM Device, error : -11

    The best place to ask your question is at the JSMS website, forum or mailing list since this is no error that directly comes from a class belonging to the core Java classes.

  • How to send a JMS message to a remote Queue?

    Hi,
    I know how to create a JMS message and send it to an MDB that listens to a topic in the same container in which the JMS is created.
    In other words, if I have the following MDB:
    @MessageDriven(mappedName = "jms/MyQueue", ...)
    public class MyMDB implements MessageListener {
    Elsewhere in my JEE app I can create a Queue like this:
    @Resource(mappedName = "jms/MyQueue")
    Queue queue;
    and use it to send a message to the MDB.
    But How can I send a message to an MDB that's deployed in another app server on another machine in the network? Both of the app servers are Glassfish.
    Thanks in advance.
    Edited by: EJP on 9/08/2011 21:49: fixed your meaningless title

    Hi,
    The first thing I would like to suggest is, we never/can't send message directly to MDB. We always send/receive message(s) to/from the destination. In case of MDB, the application server register the MDB as message listener against particular destination, and invoked the onMessage() method when message arrives on particular destination.
    If I am not wrong, what you want to achieve is asynchronous communication between two applications deployed in two different machine. In your case, you want your one application works as message producer and other act as an message consumer, and both are deployed in different machine.
    In this situations, you only need to configure the JMS administration object, connection factories and destinations, on one Application server and configure other application server to use those configuration using JMS resource adapter. you can well achieve this by configuring the JMS Resource Adapter. you need to check the Glassfish documentation.
    If you don't want to break the JMS specification, always communicate with Messaging Provider through Resource Adapter.
    I hope this helps.

  • How to send a text message from my desktop computer ?

    How can I send a text message from my desktop computer using Firefox ?

    There are many free web-to-phone text services, such as http://textem.net/
    If you intend to do a lot of this, it may be best to have some IM services that can communicate with cellphones (I use AIM).

  • How to send a text message instead of imessage on Mac and Ipad iOs 8.1?

    My iphone 6 Plus, ipad mini 2 and MBA on OSX Yosemite are all linked together under the same wireless network. However when i send a message on my Mac to my friend who is using an iphone, default sending is via imessage. How can i choose to send a text message instead of imessage? WHy? because sometimes my friend is not online. So i need to send a text message that my messages are received real time.

    Hey there ipremacha,
    It sounds like you need to enable Text Message Forwarding on your iPhone for your iPad to send MMS/SMS messages through your phone.
    Connect your iPhone, iPad, iPod touch, and Mac using Continuity
    Go to Messages > Text Message Forwarding, and enable the device(s) you would like to forward messages to.
    Your Mac, iPad, or iPod touch will display a code. Enter this code on your iPhone to verify the SMS feature.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • HT5395 I have a mac , but i have no idea what version it is.. its all white and i just got it .. i have one problem , i have no idea how to send the text messages ? it keeps telling me i need to have some aol account .so somebody please help me understand

    im just trying to find out how to send a message on the mac ...... someone please help ! thanks so much !

    HI,
    This is fairly generic (for iChat 4) although some links are out of date.
    Start at the second menu down that says "Get a Screen Name"
    http://www.ralphjohns.co.uk/versions/ichatvers4/howtos4.html
    iChat 5 is virtually no different
    iChat 6 adds the Yahoo option.
    As has been said more specific info from yourself will enable a much more detailed reponse from us.
    10:44 pm      Wednesday; July 24, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • How to send HTML as message body using SMTP

    I need to send HTML formatted emails. I used the Report Generation Toolkit to build my HTML document and make sure I had all of the formatting right. Then I modified the Save Report To File.vi to also give me the HTML text string on an output connector and I wire this string to the message input on the SMTP Email Send Message.vi.
    I receive the email OK, but all I see is the HTML code in the message body. What can I do to make sure that the email displays the message correctly.
    I use Outlook and I know it will receive and display HTML emails, I get them all the time.
    I would appreciate any help.

    Hi Dgw,
    it is similar. You must change message MINE content-type to "text/html" type. Because everyone document in email protocol have set MINE content-type. It is inforamtion for email servers and for email cients (Thunderbird, Outlook and etc.)
    For sendning mail with attachments you must use and modified "SMTP Send Multiple Attachments.vi" - if you can do backup of this VI and subVIs. Open Diagram of "SMTP Send Multiple Attachments.vi" after "SMTP Send Multiple
    Attachments Message.vi" and ther is VI "MIME Send Data Attachment.vi" - have control "MIME content-type" but code from NI don't use it.
    And like as my previous message, create new string control "MINE content-type" and take out this control to "main" Email VI.
    And embedd
    ed file you set up in control-cluster "attachments". I don't test it, but I mind thet must working :-)
    Have nice day
    JCC
    Attachments:
    email.jpg ‏70 KB

  • How to Send a Picture message

    pls assist me that ho can i send picture message ..... find the pic's
    Moderator's Note: The subject was amended as the post was moved to the appropriate board.
    Attachments:
    wp_ss_20130514_0003[2].png ‏48 KB
    wp_ss_20130514_0002[1].png ‏29 KB

    To send a picture message by MMS, goto Photos, then find the picture you wish to send. When you have found it. longpress the picture, then tap Share>Messaging

  • How to send a text message in lookout

    I am trying to send a text message as well with limited results.
    If my email address contains numbers in it I get an error on the send.
    SMTP error: No addresses in list were deliverable
    any ideas?

    I send email messages to an email address that is a phone number (example: [email protected]) It is received by the telephone as an SMS message no problems. Are you able to send messages with that mail object if the email address contains only letters? (this is what it sounds like what you are explaining, but I have not had this problem) Version of LookOut you are using?

Maybe you are looking for