How to separate multiple layers to eps / jpeg files?

I work with drawings of garments in illustrator and use layers to seperate out multiple colors. Is there a script/s that will seperate out each layer into individual eps/jpeg files with the name of the layer + the name of the original file into a new single file? Example: Original file name is 0005. This layer would have up to 10 color layers. I would like to have each layer seperate out to individual files named : (sample) 0005_red.eps and 0005_red.jpg
All jpeg files need to be 100dpi medium resoulution.
Any help would be appeciated!

''gallicbear2 [[#question-1038045|said]]''
<blockquote>
Can't figure out how to separate addressees on one line. Nowhere is this spelled out. Other forums say a colon or a semi-colon. Neither one works. When I add either one, the first address turns red, meaning it is no longer recognized by Thunderbird. Am using TB 24.6.0. Thanks in advance.
</blockquote>
Thanks, Matt. That answers my question.

Similar Messages

How can I copy layers from one .fla file to another .fla file?

Hi,
How can I copy layers from one .fla file to another .fla file? Please do help.
Thanks.

Select all the frames you want to copy, right click and select copy frames then select the file you want to paste them into and right click again and then paste frames.
The layers the frames are should come across with them.

How to separate multiple addressees on one to: or Bcc: line

Can't figure out how to separate addressees on one line. Nowhere is this spelled out. Other forums say a colon or a semi-colon. Neither one works. When I add either one, the first address turns red, meaning it is no longer recognized by Thunderbird. Am using TB 24.6.0. Thanks in advance.

''gallicbear2 [[#question-1038045|said]]''
<blockquote>
Can't figure out how to separate addressees on one line. Nowhere is this spelled out. Other forums say a colon or a semi-colon. Neither one works. When I add either one, the first address turns red, meaning it is no longer recognized by Thunderbird. Am using TB 24.6.0. Thanks in advance.
</blockquote>
Thanks, Matt. That answers my question.

How to use multiple table in single control file?

Hi,
How to use multiple table and data file in sigle control file? I have a four table and four csv file i mean data file for that. I am running concurrent program to load the data from csv file to custom table. based on my input data file name, it has to take automatically from one control file.
Can anyone share with me how can i acheive this?
Thanks

Hi,
Can't we acehive like below. I don't this exactly corrcect.
OPTIONS (SKIP=1)
LOAD DATA
INFILE << file name 1 >>
APPEND INTO TABLE XXCZ_VA_SAMPLE1
FIELDS TERMINATED BY "," OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
PARENT_ITEM "TRIM(BOTH FROM :PARENT_ITEM)"
LOAD DATA
INFILE << file name 2 >>
APPEND INTO TABLE XXCZ_VA_SAMPLE2
FIELDS TERMINATED BY "," OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
ITEM_NUMBER "TRIM(BOTH FROM :ITEM_NUMBER)"
)Edited by: orasuriya on Sep 14, 2009 3:03 AM

How to create multiple pages in the output file?

hi, we have an application (C++) that generates PDF output. I've been asked to figure out how to create multiple copies of each page (uncollated). i.e. the output would be 4 copies of p 1 followed by 4 copies of p 2, etc. I'd like to do this without actually replicating each page if possible ... any ideas?

Why not just put four copies of the same CosObj reference into the Pages array/tree?

How do I stop lightroom from modifying JPEG files?

During the Beta phase, I pretty much used lightroom only on RAW files. Now, with V1.0, I have had occassion to use this program on JPEGS produced by a P&S camera.
Hmmm. It appears that lightroom is writing data to the files. . .Is there anyway to force the program to use independent sidecar files, like it does for RAW? Manipulating JPEGS is a *major* draw back.
(So far. . I have been smart enough to only feed lightroom *copies* of files. . .so no data has been corrupted yet)
Thanks for your help.

Yes, Lightroom V1.0 is DEFINATLY writing data to JPEG files.
I would VERY STRONGLY prefer sidecar files, as I do not want to ever modify the "as shot" files.
Simply NOT USING the sidecar data, however, is silly. How else do you know what has been done to the images? I have now developed the following (really cludgy yet effective) work practice:
1) When storing files, I immediately create a "modified" and "Original" image directory. (Yes, this effectively DOUBLES storage requirements).
2) The original files are immediately tagged as "read only" within XP. This stops (I hope) lightroom from messing with them if I make a mistake.
3) I import the "modified" files into lightroom for image handling. I allow lightroom to modify these files to it's hearts content.
This seems to be working well for me. I have had to move some directories around, and have "reimported" the modified JPEGs into lightroom: Lightroom correctly (I think) maintained all the edits from my original pass at the files. I have not checked if the histories are lost. . .but that is not a big deal, as I only care about the end result.
BUT. . . I still would STRONGLY prefer a sidecar file.
PS: This is my biggest nit-pick with lightroom so far. Except that I suspect that Lightroom V1.0 (with 200 images in the library so for) appears slower than Lightroom B4.1

How to put multiple classes in a single file?

Hello,
I'd like to put mutliple classes in a single file. (This
would be useful for grouping children that are minor extensions of
parent classes or helper classes that are used by one class only).
When I tried to put two classes in one file, I got this error
message:
5006: An ActionScript file can not have more than one
externally visible definition: Notation.editField,
Notation.labelField1
This is the structure I used. Thanks in advance for your
help.

You can declare multiple classes in a single file, but only
one can be
within the package declaration. All class declarations
outside the package
are invisible to code outside the file.
package sample
public class SampleClass
class SampleClassHelper
class SampleClassHelper2

Problem: How to use multiple layers style?

Hello everyone!
Sorry if my English isn't fluent.
Some of photoshop styles have multiple styles icon in style tab that should to use together, I do below steps but it doesn't show effect style as psd file.(in psd file effect style is true but when I do below steps my effect style is not true).
Steps that I do:
1. I insert style from preset manager.
2. I apply first icon style to first layer.
3. Then I duplicate first layer.
4. Then I apply second icon style to duplicated layer.
I do this 4 steps but my effect is not true.
Download link of style:
http://fc03.deviantart.net/fs71/f/2012/229/a/6/free_metal_chrome_layer_styles_and_psd_by_g iallo86-d5bhbrn.zip
You can see below picture:
please help me!
Thanks a lot.

Thanks for getting back to me. My reply may sound lazy, but whoever made these styles should be able to better explain how to use it. It just seems one layer covers the other, and I don't want to guess at the settings.
Gene

How to drag multiple layers to a new tab?

I want to drag multiple adjustment layers, typically four with default masks but no masking has been applied, from one document to another. I have read several articles about this, but no method works reliably for me. I running CS6.
Any suggestions?

Hello, you cannot drag from the layers panel, this has been requested several times already.
BUT, you can do it from the document itself. The explanation seems long, but it is an easy finger gym, once you've done it a few times.
You can switch temporarily to the move tool by holding the CTRL key (on a PC, CMD on a Mac).
Right-click when doing so gives you a list of the layers located under the cursor.
You can then target a first adjustment layer.
Continue holding CTRL or CMD, and add the SHIFT key. (Usually, Shift means "add" in Photoshop and in other programs) and right-click to add other adjustment layers to the targeted list.
Keep holding the CTRL(PC)/CMD(Mac) key, and drag the targeted layers to the tab of the other document, wait for Photoshop to switch to that one, and release the mouse on top of your canvas. (holding the shift key ensures centering of the layers)
Basically, CTRL+SHIFT+Right-click on a PC, CTRL+CMD+SHIFT on a Mac, then CTRL+drag.
You can remove the CTRL/CMD key if you switch to the move tool altogether.

How to separate multiple outputs from a TPC

I am using a TCPactive to receive information from a separate program and have that working fine, I just need to know if there is a way to separate the information I receive back to Labview into different text boxes. As of right now, I can call for lets say frequency and amplitude, but they return into the same text box. Is there a way to recognize a call word and put it into a certain output box, or even sequentially separate them, like, if I call them in order every time, to put the first output into one box etc...
Patrick

Hello,
Take a look at the LabVIEW shipping example titled 'Simple Data Client' under the 'Networking' category. This VI should do what you're describing.
Regards,
National Instruments
Applications Engineer

How to apply multiple automator workflows to one file

Hi everyone,
I've set up a few workflow applications to automate the process of making packshots from PDF files. The way those roughly work is they create a temporary copy in a folder, open a Photoshop droplet that executes all the actions on the file, and then save the finished product in a "finished" folder.
However, we frequently need to deliver multiple packshots made from the same file. I was asked to make one automator app that allowed us to drop the PDF version on it, resulting in the multiple types of packshots in the "finished" folder, together with the original PDF.
The way I have this set up right now is as follows:
1) Copy the original PDF file to the "finished" folder
2) Execute the first automator app
3) Execute the second automator app
This seems simple enough, and does work in 10.6.8. When I try it on a different computer in our studio though, with 10.7 installed, I get various errors:
- Sometimes it says an error occured within one of the automator apps, while the app works fine when running it seperately (on all computers).
- Sometimes it says something like "An error occurred while converting the data" when moving on from the first application to the second application
- Sometimes I'll get an error message in the log, saying:
*** -[_NSArrayl objectAtIndex:]: index 0 beyond bounds for empty array
What I got from this is that it's actually not getting the right input it requires (or not getting any input, since it's an empty array). However, the previous task is set to "return the task input" (our systems are Dutch so excuse me for any discrepancies in translations please), and the resulting output that I get seems to be what I want the next automator application to use. Below is a screenshot of the error message:
What I've tried:
- I read somewhere that the newer versions of Automator require the action "Retrieve selected finder items" between them. I've tried using this in various ways (between all other actions/tasks, only before the second application to be run and before both applications to be run), but with no success. The problem I have with these is that, during the applications, it moves the files around, thus apparently selecting those folders as well.
- Building an entirely new workflow on the newer system
- Using "Start application" instead of "Execute Automator workflow". This results in Automator saying that it did execute the workflow while nothing happened.
- Using "Ignore input" for the second application. This also results in Automator saying that it executed the workflow while nothing happened.
So right now, I'm pretty stumped as to how to get this combination of apps to work in 10.7. Any solutions or workarounds are most welcome.
Thanks in advance!

Yes, angelanna. You can merge or split your video file via FCP sequence.
ahaah, maybe I think angelanna would like to get the resulting file with MTS format because he mentioned “No need to be compressed”. Are you asking for this, angelanna?
If so, a simple MTS files managing and editing tool is needed. Maybe you can have a try the Mac version of Aunsoft Final Mate for managing HD camcorder footages. I just downloaded its free trial version and it offers a simple way of garping footages directly from camcorder. And also it provides a attractive feature to join flawlessly and split accurately native MTS files for video file output with original MTS format.
Maybe this is the tool cwhich an help you out, angelanna.
Enjoy your video.

How to apply multiple actions on a single file in one go to generate multiple watermarked pdfs?

usually i need to create many watermarked datasheets for different customers using a single base pdf. currently i run individual actions for individual customers on the same file which means i have to runs 10s of individual actions every time i have new source file. can i make a single action or a script which will take a single source file, run multiple actions(~15-20) for watermarks and save these files separately? basically what i need is instead of running many individual actions i run a single action/script to make it automatic. if yes, how to do so?

Hi Monte,
You can achieve this by assigning a secondary extension to another button, but this might not be what you want, so if you can elaborate a little further as to what you want exactly I can help you with putting together a solution
Cheers,
David Trad.
**When you rate a persons post, you are indicating a thank you or that it helped, but at the same time you are also helping to maintain the community spirit - You don't have to rate posts and you wont be looked down upon :) **

How to create a browser to view JPEG files?

Hi people,
just wondering if anyone knows how to create a simple browser to view JPEG or some other image files?...Is there e.g. or tutorial provided by Sun on this...
AG

Sure, the Java Tutorial duscusses working with ImageIcons in an applet (or application) here:
http://java.sun.com/docs/books/tutorial/uiswing/misc/icon.html
The IconDemoApplet example is just such an image browser. Cheers,
Chris

How to manage multiple formats in a single file ,

hi ,
I 'm getting multiple format files from my source..
how to tackle this scenario in ODI ,
Plz reply me and thanks in advance.

RECORD CODES in column definition are used to differentiate between different record types that are put in a same file.
The premise here is that the file contains records of different record types and a field in the file identifies the record type. eg. A file contains 2 record types with different formats.
A,101,'CMP', 'IDV
A,102,'CMP', 'IDV
B,1001,'GFRV_OCCD', 'GFRV_ID', 'IDVA, 121 ,'CMP', 'IDV'
A,101,'CMP', 'IDV
B,2001,'FRV_OGCCD', 'GFRV_ID', 'IDVA, 121 ,'CMP', 'IDV'
A,101,'CMP', 'IDVHere the first field identifies the record type - A or B. So, in the ODI data store, you use A or B in the record code field of the column definition of the data-store.
ODI automatically, gets the records matching the record code specified in the definition of the data-store.
So, you will create 2 data-stores, one with record code = A (4 columns) and other with record code = B (8 columns)
Hope that helps.

How to store multiple edits of the same file

When I edit photos I typically create several versions of the same photo. The first edit I will end the filename with an "x". The second edit I will end with a "y", etc. For a black and white edit the file name ends with "bw". An edited version scaled down for sharing will typically end with it's long side dim i.e. IMG_2345_960.jpg. I'm new to Lightroom and it looks like only one version is stored in the data base. Can multiple versions be saved in the catelog? How would I set my version system up in Lightroom? Thank You.

You can also use "snapshots". Snapshots are saved and when you open a RAW file just select the snapshot you want and output the image.

How to separate multiple layers to eps / jpeg files?

Similar Messages

Maybe you are looking for