How to separate OSB logs to separate file

Hi
I searched a lot but i m not able to find any simple, easy method to separate OSB logs from Weblogic server logs.
Do any one knows the simple ways to do this?
there is a lot of discussion in forum regarding this, but i m not able to implement it.
Please help, its vv urgent.

Need help in logging the response in single file
Regards,
Anuj

Similar Messages

How to overwrite a log and bad file in external table in oracle 10g

Hi,
I have used external table in oracle 10g.whenever use select query in external table orace internally create one log file in specified directory,
but this log file is growing.How can i overwrite the log file(old to replace with new).I need overwrite a log and bad file in external table.
kindly give the solutions.
By
Siva

I don't believe that is possible with the LOGFILE clause, but it may be with the BADFILE clause. Here is an excerpt from the documentation :
The LOGFILE clause names the file that contains messages generated by the external tables utility while it was accessing data in the datafile. If a log file already exists by the same name, the access driver reopens that log file and appends new log information to the end. This is different from bad files and discard files, which overwrite any existing file. NOLOGFILE is used to prevent creation of a log file.
If you specify LOGFILE, you must specify a filename or you will receive an error.
If neither LOGFILE nor NOLOGFILE is specified, the default is to create a log file. The name of the file will be the table name followed by _%p and it will have an extension of .log.

How to expose OSB as a WADL file

HI ,
I have a requirement where I need to create an OSB service and expose it as a WADL file rather than a WSDL file.
Please let me know how to expose the OSB as a WADL file.
Thanks in Advance!!!

in that case you still dont have a deployed wadl there.
you could use this for documentation on the deployed webservice to see what resources you can retrieve.
other option could be to webservice in front of osb and place the wadl somewhere in the http server, so you can just retrieve it by http, and on selection of the resource of the webservice just passthrough these to the osb interface (proxyservice)

How to separate file path and file name

Hi All,
Is there any FM which will separate the filepath and filename? I have whole string is like /test/test.txt. I want to separate this to two parts one is /test/ and another is test.txt. How to achieve this?
Regards,
Jeetu

use this FM - PC_SPLIT_COMPLETE_FILENAME or
'SO_SPLIT_FILE_AND_PATH
Regards,
Amit
Reward all helpful replies.

How to view the log/output output files in browser through email notification hyperlinks

I am working on an extension in Fusion Applications. The requirement is to send a notification with details of a concurrent program. The notification will have hyperlinks of "out" and "log" files. When the user clicks on the "out" hyperlink, it should open the Output file(that resides in the unix box) of the corresponding concurrent program in the browser. We know that in E-business suite R12 functionality, records should be populated in FND_FILE_TEMP table to view any files from unix box in browser.
Can you please let me know the approach to be taken in Fusion Applications?

The format of the start and end timestamp ranges are "MM/dd/yy HH:mm:ss" for example 12/01/09 12:00:00. Give this a try.
Thanks

How to catch all logs to one file with rsyslog?

Hi,
I have this config in rsyslog:
# cat /etc/rsyslog.conf
# Minimal config
$ModLoad imuxsock # provides support for local system logging
$ModLoad imklog # provides kernel logging support
$ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat
$FileOwner root
$FileGroup root
$FileCreateMode 0640
$DirCreateMode 0755
$Umask 0022
$WorkDirectory /var/spool/rsyslog
$IncludeConfig /etc/rsyslog.d/*.conf
# Un sol log
*.* /var/log/missatges.log
# Si hi ha notificacions crítiques (pànic), enviar per consola a tots els usuaris
*.emerg :omusrmsg:*
[root@serviedre ~]#
but in 'missatges.log' there is no systemd-timesyncd output:
# journalctl -n
-- Logs begin at Fri 2010-01-01 01:00:05 CET, end at Mon 2014-12-08 18:33:08 CET. --
Dec 08 18:31:20 serviedre systemd[162]: Starting Default.
Dec 08 18:31:20 serviedre systemd[162]: Reached target Default.
Dec 08 18:31:20 serviedre systemd[162]: Startup finished in 168ms.
Dec 08 18:31:20 serviedre systemd[1]: Started User Manager for UID 0.
Dec 08 18:31:44 serviedre systemd-timesyncd[129]: Using NTP server 86.59.80.170:123 (2.europe.pool.ntp.org).
Dec 08 18:31:31 serviedre systemd[162]: Time has been changed
Dec 08 18:31:31 serviedre systemd-timesyncd[129]: interval/delta/delay/jitter/drift 32s/-12.456s/0.115s/0.000s/+0ppm
Dec 08 18:31:31 serviedre systemd[1]: Time has been changed
Dec 08 18:32:03 serviedre systemd-timesyncd[129]: interval/delta/delay/jitter/drift 64s/+0.001s/0.113s/0.000s/+0ppm
Dec 08 18:33:08 serviedre systemd-timesyncd[129]: interval/delta/delay/jitter/drift 128s/+0.004s/0.114s/0.001s/+15ppm
[root@serviedre ~]# cat /var/log/missatges.log | grep drift
[root@serviedre ~]#
Why?
Last edited by xanb (2014-12-17 09:54:50)

This happens with a lot of info: `journalctl -b` prints:
Dec 17 09:36:16 serviedre systemd[6276]: Received SIGRTMIN+24 from PID 6328 (kill).
Dec 17 09:36:16 serviedre systemd[6277]: pam_unix(systemd-user:session): session closed for user root
Dec 17 09:36:16 serviedre systemd[1]: Stopped User Manager for UID 0.
Dec 17 09:36:16 serviedre systemd[1]: Stopping user-0.slice.
Dec 17 09:36:17 serviedre systemd[1]: Removed slice user-0.slice.
Dec 17 09:41:38 serviedre systemd-timesyncd[133]: interval/delta/delay/jitter/drift 2048s/-0.000s/0.099s/0.000s/+55ppm
Dec 17 09:55:51 serviedre sshd[6333]: Accepted password for root from 172.26.0.7 port 35114 ssh2
Dec 17 09:55:51 serviedre sshd[6333]: pam_unix(sshd:session): session opened for user root by (uid=0)
Dec 17 09:55:51 serviedre systemd[1]: Starting user-0.slice.
Dec 17 09:55:51 serviedre systemd[1]: Created slice user-0.slice.
Dec 17 09:55:51 serviedre systemd[1]: Starting User Manager for UID 0...
Dec 17 09:55:52 serviedre systemd[1]: Starting Session c2 of user root.
Dec 17 09:55:52 serviedre systemd-logind[137]: New session c2 of user root.
Dec 17 09:55:52 serviedre systemd[6335]: pam_unix(systemd-user:session): session opened for user root by (uid=0)
Dec 17 09:55:52 serviedre systemd[1]: Started Session c2 of user root.
Dec 17 09:55:52 serviedre systemd[6335]: Starting Paths.
Dec 17 09:55:52 serviedre systemd[6335]: Reached target Paths.
Dec 17 09:55:52 serviedre systemd[6335]: Starting Timers.
Dec 17 09:55:52 serviedre systemd[6335]: Reached target Timers.
Dec 17 09:55:52 serviedre systemd[6335]: Starting Sockets.
Dec 17 09:55:52 serviedre systemd[6335]: Reached target Sockets.
Dec 17 09:55:52 serviedre systemd[6335]: Starting Basic System.
Dec 17 09:55:52 serviedre systemd[6335]: Reached target Basic System.
Dec 17 09:55:52 serviedre systemd[6335]: Starting Default.
Dec 17 09:55:52 serviedre systemd[6335]: Reached target Default.
Dec 17 09:55:52 serviedre systemd[6335]: Startup finished in 143ms.
Dec 17 09:55:52 serviedre systemd[1]: Started User Manager for UID 0.
Dec 17 10:15:46 serviedre systemd-timesyncd[133]: interval/delta/delay/jitter/drift 2048s/-0.000s/0.100s/0.000s/+55ppm
Dec 17 10:19:43 serviedre systemd[1]: Reloading.
Dec 17 10:19:44 serviedre systemd[1]: Unknown serialization item 'subscribed=:1.0'
but
[root@serviedre ~]# tail /var/log/missatges.log
Dec 14 18:33:12 localhost kernel: [ 4.959569] mmcblk0: p1
Dec 14 18:33:12 localhost kernel: [ 6.833607] EXT4-fs (sda1): re-mounted. Opts: discard
Dec 14 18:33:12 localhost kernel: [ 9.783482] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: discard
Dec 14 18:33:12 localhost kernel: [ 9.885975] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: discard
Dec 14 18:33:12 localhost kernel: [ 10.004117] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: discard
Dec 14 18:33:12 localhost kernel: [ 10.109992] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: discard
Dec 14 18:33:12 localhost kernel: [ 10.243718] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: discard
Dec 14 18:33:12 localhost kernel: [ 10.596835] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: discard
Dec 14 18:33:12 localhost kernel: [ 12.914250] sunxi_emac sunxi_emac.0: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
Dec 14 18:33:22 localhost kernel: [ 23.247589] eth0: no IPv6 routers present
[root@serviedre ~]#

How do I use my trailer in my new iMovie ? They are separate files.

In my previous version of iMovie running on my iMac I could easily create a trailer (a quick preview of the video) to run at the start of my new movie. The trailer and the movie were all part of the same file.
With my new Mac Pro running iMovie 10.0.3 I created a 1 minute trailer of a recent camping trip. I like te excitement the trailer creates. I also created a one hour video of the trip itself.
These are two separate files in my Project library. How do I get the trailer to run at the start of my hour long video?
thank you

Hello bruce.roberts99,
You can export the trailer as a QuickTime file, then import it back into an event. This should allow you to add the trailer to the beginning of another project.
iMovie (2013): Export a QuickTime file
http://support.apple.com/kb/PH14734
Cheers,
Allen

How do I export detached audio files as separate files, for Pro Tools processing?

My project is a live band performance. I have every song as a separate Event with associated audio. I have detachd all the audio from all the video Events. I now want to Export the audio files to Pro Tools for editing, then Import the edited audio back into FCP X and snap the edited audio to the associated video Events.
My problem is this: FCP X keeps exporting the audio as a single large WAV file, rather than as separate WAV files. In fact, the video events are separate, and so the audio associated with the video Events are separate.
I first renamed the Role of every audio file as "Music", then did a Share --> Export Media of all "Music" audio Roles. After exporting, I found it was one large WAV file, rather than separate files of different sizes.
As a 2nd try, I created Sub-Roles for each audio clip, and named each one with a distinct Sub-Role name. I then Exported all these Sub-Roles (yes, tedious). The result was that every exported WAV file was the same size, the same as the file size in my first try. The only audio that could be heard in each file was the audio in that particular song, but FCP X still created the very large file with silence in all the rest of the file. Since the file lengths don't match the original audio fil lengths, there will be a problem when I Import the edited files back into FCP X and want to Snap them into place.
Question:
How can I export the individual detached audio clips as separate files, the length of each file equaling the length of the original audio file in FCP X?
Do I need to separate the detached audio into separate Layers visually in the Project Timeline, so they are not touching? Or does this matter?
Help!!

Michael Holmes1 wrote:
I have to record all the color changes I make in one Project, so I can repeat them in the other 17 projects, etc.
No.
You need to explore Compound Clips. This workflow may or may not be of help.
Select an Event with clips in it and press Option+G to make a (blank) compound clip.
Select the Event Browser, create a new Event and call it 'Effects'.
Drag the Compound Clip into this Event.
Right-click the clip and select 'Open in Timeline'.
Select the timeline and press Option+W. This will add a Gap Clip to the timeline.
Select the gap clip and press Ctrl+D then type in the duration you want the clip to be.
Now open a project and select and copy one of the clips with effects etc.
Open the Compound Clip in the Timeline again, select the gap clip and press Option+Cmd+V to paste the effects into your Compound Clip.
This clip is now saved in your Browser and will remain there for you to copy and then paste the effects into any clip in any project.
It's a bit clunky, but it works - and once you learn about Compound Clips, you can work wonders with them. As an example, if you want to add more effects without overwriting the effects in the Compound Clip, simply make the Compound Clip into a Compound Clip (again) and add the effects. They will be added to the original effects.
Andy.

How do I use a Sequence component in a separate file?

I have my TileList control in the following code, and the data effect code in a separate file. I can't link them together. Here is the example I read (http://livedocs.adobe.com/flex/3/html/help.html?content=createeffects_5.html), but it's in flex 3 version. I don't know how to do that in flex 4. Can you one tell me how to do it?
//======================CODE START
<?xml version="1.0" encoding="utf-8"?>
<mx:TileList xmlns:fx="http://ns.adobe.com/mxml/2009"
             xmlns:s="library://ns.adobe.com/flex/spark"
             xmlns:mx="library://ns.adobe.com/flex/mx"
             itemsChangeEffect="{dataEffect}">                                 // <- Where my question is
    <fx:Script>
        <![CDATA[
            import effects.dataEffect;
        ]]>
    </fx:Script>
</mx:TileList>
//======================CODE END
My data effect in a separate file effects/dataEffect.mxml here:
//======================CODE START
<?xml version="1.0" encoding="utf-8"?>
<s:Group xmlns:fx="http://ns.adobe.com/mxml/2009"
         xmlns:s="library://ns.adobe.com/flex/spark"
         xmlns:mx="library://ns.adobe.com/flex/mx">
    <fx:Declarations>
        <s:Sequence id="seq">
            <mx:Blur
                blurYTo="12" blurXTo="12"
                duration="300"
                perElementOffset="150"
                filter="removeItem"/>
            <mx:SetPropertyAction
                name="visible" value="false"
                filter="removeItem"/>
            <mx:UnconstrainItemAction/>
            <mx:Parallel>
                <mx:Move
                    duration="750"
                    perElementOffset="20"/>
                <mx:RemoveItemAction
                    startDelay="400"
                    filter="removeItem"/>
                <mx:AddItemAction
                    startDelay="400"
                    filter="addItem"/>
                <mx:Blur
                    startDelay="410"
                    blurXFrom="18" blurYFrom="18" blurXTo="0" blurYTo="0"
                    duration="300"
                    filter="addItem"/>
            </mx:Parallel>
        </s:Sequence>
    </fx:Declarations>
</s:Group>
//======================CODE END

Hey!
Thanks, but I wrote
19. dyemotion,
Nov 18, 2013 9:43 AM    in reply to TREX
Thanks,
but I need the file in png or jpg.
I have to upload this image and there is no other data type possible. :/
that I need png or jpg.
And of course. By every change of the saving options, I tried how it looks when its uploaded.
But every time it doesn't look like it should be.
That is the reason why I wrote my questions in this forum.

How can I import a movie into iMovie 09 from a hard drive? The movie will open and play in idvd but breaks into separate files that can't be downloaded when I try to import. Can it be done?

How can I import a movie into iMovie 09 from a hard drive? The movie will open and play in idvd but breaks into separate files that can't be downloaded when I try to import. Can it be done? I am trying to create a disc of player highlights for a collegiate coach, and I am using movie files downloaded to my hard drive from a DVD created on a PC.

No unfortunately it won't open in quicktime either. It does the same thing that Imovie does, separates it into two file folders audio and video, and if i select video it opens to reveal 8 files that cannot be selected. VIDEO_TS.BUP, VIDEO_TS.IFO, VIDEO_TS.VOB,VTS_01_0.BUP, VTS_01_0.IFO, VTS_01_1.VOB, VTS_01_2.VB, VTS_01_3.VOB. All of which cannot be opened or selected.
Opening it in Idvd and folllowing your suggestion works and I get a format code of NTSC. Is that the same? Thank you for your time and response.
CaCanuck

When I want to attach a file to an e-mail I'm sending from my iCloud account it makes the file show up in the body of the e-mail instead of attaching it as a separate file the receiver can open. How can I change this?

When I want to attach a file to an e-mail I'm sending from my iCloud account it makes the file show up in the body of the e-mail instead of attaching it as a separate file the receiver can open. How can I change this?

It should be an attachment. Your Mac just displays a preview of certain attachments (such as .pdfs) in the body of the message. A PC, for example, will see it as an attached file rather than a preview.
You can save the attachment on your Mac by Control-clicking on it and selecting Save Attachment.

How to Send Attachments as Separate Files?

How do I send an attachment as a separate file using Mail 2.1.1 so that it is not embedded in the message?
Thanks
iBook G4 Mac OS X (10.4.5)

Not sure I understand your question, do you mean like how images and PDFs display in the message window? Well, you could right click on the file in the Finder and Create Archive, that will create a .zip file, which is also smaller for e-mailing, then attach the .zip file. You can combine a few files together into a folder first and archive that also.

Multiplexing redo logs and control files to a separate diskgroup

General question this one...
I've been using ASM for a few years now and have always installed a new system with 3 diskgroups
+DATA - for datafiles, control files, redo logs
+FRA - for achive logs, flash recovery. RMAN backup
Those I guess are the standards, but I've always created an extra (very small) diskgroup, called +ONLINE where I keep multiplexed copies of the redo logs and control files.
My reasoning behind this is that if there are any issues with the +DATA diskgroup, the redo logs and control files can still be accessed.
In the olden days (all those 5 years ago!), on local storage, this was important, but is it still important now? With all the striping and mirroring going on (both at ASM and RAID level), am I just being overtly paranoid? Does this additional +ONLINE diskgroup actually hamper performance? (with dual write overheads that are not necessary)
Thoughts?

Some of the decision will probably depend on your specific environment's data activity, volume, and throughput.
Something to remember is that redo logs are sequential write, which benefit from a lower RAID overhead (RAID-10, 2 writes per IOP vs RAID-5, 4 writes per IOP). RAID-10 is often not cost-effective for the data portion of a database. If your database is OLTP with a high volume of random reads/writes, you're potentially hurting redo throughput by creating contention on the disks sharing data and redo. Again, that depends entirely on what you're seeing in terms of wait events. A low volume database would probably not experience any noticeable degraded performance.
In my environment, I have RAID-5 and RAID-10 available, and since the RAID-10 requirement from a capacity perspective for redo is very low, it makes sense to create 2 diskgroups for online redo, separate from DATA, and separate from each other. This way, we don't need to be concerned with DATA transactions impacting REDO performance, and vice versa, and we still maintain redo redundancy.
In my opinion, you can't be too paranoid. :)
Good luck!
K

How to separate RAW and JPEG files from shoot?

I'm a beginner at processing RAW files and would appreciate some help. I have concerns about moving files around in Lightroom and misplacing them. My question is:
I have imported 100 or so photos of a portrait session into Lightroom 4. Shot NEF + JPG on the card. i now have 50 pics of each file type - NEF and jpeg alternate. How best to separate file types, as a group say, in LR for best workflow post processing? I plan to work on Jpegs first and leave RAW files until later when I get some 'learning' time. Thanks.

Hi Jake.
This should be easy - make Smart collections - one with JPEG as filetype and one for RAW as inclusion criteria.
Be sure to rename the Smart collection something helpful like JPEG or RAW as the case may be.
Tony Jay

How to separate multiple layers to eps / jpeg files?

I work with drawings of garments in illustrator and use layers to seperate out multiple colors. Is there a script/s that will seperate out each layer into individual eps/jpeg files with the name of the layer + the name of the original file into a new single file? Example: Original file name is 0005. This layer would have up to 10 color layers. I would like to have each layer seperate out to individual files named : (sample) 0005_red.eps and 0005_red.jpg
All jpeg files need to be 100dpi medium resoulution.
Any help would be appeciated!

''gallicbear2 [[#question-1038045|said]]''
<blockquote>
Can't figure out how to separate addressees on one line. Nowhere is this spelled out. Other forums say a colon or a semi-colon. Neither one works. When I add either one, the first address turns red, meaning it is no longer recognized by Thunderbird. Am using TB 24.6.0. Thanks in advance.
</blockquote>
Thanks, Matt. That answers my question.

How to separate OSB logs to separate file

Similar Messages

Maybe you are looking for