How to separate the 2 stereo tracks?

I'm sure this must be easy but I can't figure it out.
I want to separate the 2 tracks on my stereo tracks and use them separately .... how?
thanks gang!

I cannot thank you enough!
you have saved me much frustration.
thanks for taking the time to answer and have a great day!!

Similar Messages

Is there a way in iTunes to separate the stereo tracks and play just one side?

Files that I have can be played so that you hear one of the two stereo tracks of a song. So far I have not been able to figure out a way to do this in iTunes. Does anyone know how to do this? Is this a lost cause?

It's a lost cause.
I sould add that Quicktime has a left/ right control.
Window>>Show AV control.

How to separate the music by tracks language

I appreciate if someone tells me how to separate the music on my iPod by tracks language, example: English, Spanish, etc. I only find classification by Genere, not by language, Thanks

I cannot thank you enough!
you have saved me much frustration.
thanks for taking the time to answer and have a great day!!

How to SPLIT ONE STEREO TRACK'S L & R CHANNELS INTO TWO MONO CHANNELS

Does anyone know if this is possible: How to SPLIT ONE STEREO TRACK'S L & R CHANNELS INTO TWO MONO CHANNELS? There's got to be a way, but I just can't find out how.
I recorded a podcast -- me and a guest, with each mic going to its own mono channel. When I opened it in Audition it mixed them into one stereo channel.
Thanks in advance for any help.
Best,
Shawn

You're a big help! Thanks very much. Simple yet I must be going blind because I didn't see that in the menu.
Take care and THANKS AGAIN.
Shawn

How to make the audio track independent from the video track?

Can someone remind me how to make the audio track independent from the video track? My memory just went blank. Must be the age.
Thanks

Hi -
Select the clip in the timeline.
Type Command + L or go to the menu Modify > Link to toggle it off.
MtD

How to separate the Webi executing duration

Dear experts,
I'm running a webi report connected to backend BW via universe. Any idea on how to separate the webi executing duration into BO side part, BW side part?
Thanks,

Hi Hong ,
*The overall runtime can be split into 5 different parts (Database, OLAP, MDX, RFC and
WebIntelligence) .
*We have to gather the statistics in the SAP BW system. Use transaction SE16 (Data Browser)
and go to table RSDDSTAT_OLAP
*Enter User name and UTIME and calendar date object name (Bex query)
*Press the execute button and you will get the table with all the statistics in SAP BW. Now, you
have to separate the backend runtimes into database, OLAP and MDX runtime.
*Gathering the Database Runtime
Click on the header of the column “EVENTID” to mark the whole column. Set a filter by pressing
and select the between range from 9000 to 9011.
*Gathering the OLAP Runtime
Click on the header of the column “EVENTID” to mark the whole column. Set a filter by pressing
and select the between range from 2500 to 4999.
*Gathering MDX runtime
Click on the header of the column “EVENTID” to mark the whole column. Set a filter by pressing
and select the between range from 40000 to 40036.
*Gathering the Single Statistical Records STAD
To get the memory consumption, Remote Function Calls (RFC) and the details about all the BAPIs
called during report execution, we need to enter transaction STAD in SAP BW.
When starting STAD, set a filter on the connection user for the Universe and select the appropriate
start time and the length of the interval to be investigated (according to the total runtime of the report).
This will return a set of RFC calls to the backend. Normally, the major runtime influencing part can be
easily determined by the column “Response time (ms).
Subtract all this times from Webi report refresh time , we get time taken at BO end.

How to Separate the Instances?

Hi All,
Please let me know How to separate the instance (CI & DB in one Cluster and DI in Failover )
Thanks in Advance,
Jayakumar C

Hi ,
Can you please explain the present scenario. Is your SAP running in clusture? do u have 2 seperate boxes for Primary and Failover and now you want to run all services in primary and you want your FO to act as a DI?

How to add the Date Track Button

How to add the Date Track Button on a customized Form ?
1. Profile of Datetrack:Enabled = Yes
2. All HR Forms includes the Date Trak Button
3. On the Customized Form "Alter Date Track" can be activated from Menu :Tool --> Alter Date Track.
I'd Like the Button to appear on button ruller.
Thanks for help

Rachel,
Please review the following notes, it may be helpful.
Note: 177733.1 - How Date Track Works
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=177733.1
Note: 169059.1 - Understanding the Flow of Date Track Dates Through the Forms
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=169059.1

HT1539 how to get the french track for the digital download

how to get the french track for the digital download from having purchased a DVD at the store

Hi, pascalegadbois.
Thank you for the question. From your question it seems like you are looking to change the language setting for a movie downloaded via Digital Copy. If this is the case, then the instructions below will walk you through how to adjust the language settings. Also, depending on the region the video was downloaded, not all languages are supported.
iTunes: Language settings for video
http://support.apple.com/kb/HT5562
Cheers,
Jason H.

How can I separate the two tracks in a stereo audio track?

I have an interview which was recorded in stereo, but the sound is all in the left ear for some reason, I don't know why.
I'd like to copy the left track into the right track and do away with the very quiet sound on the right track. I've tried locking the left track in order to delete the right but it won't let me.
Could someone recommend a method?
Thankyou!

You can separate them by selecting them and typing option-L, but if one of your channels is weaker than the other, it would save time to simply open it in the Viewer and play around with the "Pan" slider.

Does anyone know how to separate a movie track from an audio track on the new Mavericks Garage band. It used to be very easy on the iLife 11 version. If anyone could respond ASAP I'd be grateful. I need to make an audio file from a video.

I urgently need to make some audio tracks from videos using the new 2013 GarageBand. In iLife11 Garageband, this was very easy. However, I cannot see how to do it in the new one. The alternative might be to revert to the iLife11 version, so does anyone know how to do this. It's extremely urgent since I need to produce these for a court custody hearing which will take place at 0800 GMT UK time on 31st October 2013. Please help.
Thank you.

When you drag a movie from the Media Browser to the Time lIne in GarageBand, you will see a pop-up "Extracting Audio".
The Movie and the audio file will appear in separate tracks. You can copy the audio region from the sound track to a different track to keep it safe and then hide the Movie track.
Léonie

How to play back one channel of the stereo track in both headphone cans?

I recorded two microphones in one stereo track. Is there some way I could listen to the left channel and then to the right channel in both cans in my headphones, like a mono track? Panning moves all sound to the left can or the right one in my headphones. But I'd like to listed Left channel as mono channel in both headphone cans, and then press some button and listen to the right channel in both cans. How can I do it?

No problem. By the way, there is a wrinkle in Logic that you may not be aware of.
When dealing with a stereo track, the knob in the channel strip that you may think of as a Pan knob is not. It's a Balance knob. What is does is to change the level of what's in either left or right channel but does NOT move the left signal to the right or vice versa.
To prove this:
* Create a project with two mono audio tracks
* Put different files on each track
* Pan one hard left, the other hard right
* Bounce the result
* Create a new project with a stereo audio track
* Import the audio that you exported above
* Use the Balance Knob to bring either up or down
* Note you cannot move one signal from its original position
If you want to pan a stereo signal, you have to use the insert: Imaging > Direction Mixer. Only then can you position a stereo signal in your stereo field. This is documented in the user manual in the section called: "Setting the Pan, Balance, or Surround Position".
Have fun!
Pete

How to capture 2 stereo tracks (4 channels) in Premiere CS6? Thanks!

Problem capturing 2 stereo tracks (4 channels) into Premiere CS6 (on a Mac) from a Canon xls1? Thanks, IndigoJim!

I'm sure I used to get all 4 tracks from my XL1s, If I rememder correctly there was one Avi with a stereo track and a separate wav with the other pair. When in 4 track mode the audio is only 12 bit. The computer I used back then had a Matrox RT100 board, It might have been a Matrox utility that I used for the capture.

How to disable the audio track in QT Pro Movie Recording

I have a device that allows me to record DVI video (1900x1200 uncompressed) into QuickTime Pro through the Movie Recording function. It all works very well except I am trying to record video only (it's the video output of a medical device, so there is no sound). In QT pro preferences, the choices for audio input are "automatic", built-in microphone", or "line-in". I need the choice of "none" (at these files sizes I need all of the CPU's resources working on the video to improve continuity and frame rate). Does anyone know of a script to disable the audio recording portion, or how I might write one? I have never written script before, but that won't stop me from trying to learn how (or rather, launching into a prolonged period of trial and error).
I am also going to approach this by nagging the video device manufacturer, but they are more Windows- centric (they do support Mac OS X and some Linux platform so all hope is not lost). However, it would be easier if I could have more control over my own destiny, and Mac folk seem to be much more helpful.
Thanks in advance to anyone who may be able to help.

First, thanks for the quick reply.
Setting the audio option to line-in with nothing plugged in yields the same results. The device (which is essentially a continuous frame grabber) doesn't have any audio feed at all, and I think that is what is confusing QuickTime. The file I record generates one video track and several sequential audio tracks that start at roughly every 4 seconds. The movie info say that these are Big Endian Stereo L&R tracks, and that have virtually no file size to speak of. Audibly there is nothing. However, the constant "start over" with the audio is causing 2-3 second skips in the video. When the video is recording contiguously, the frame rates are on the order of 15 to 20 fps, which at 1900x1200 is fantastic for what I am doing (software training video of a Linux-based medical device; nothing cool like Snapz available for this beast).
By the way, I have tried Hack TV Carbon, hTV 0.2 and QT Broadcaster, all which will recognize the device as an input source, but not choose it. These would let me deselect the audio input. As mentioned, I am prodding the device manufacturer for help, too, so maybe they will come up with something to address this.
The other thing is that this device creates a video stream that is transferred by USB2. If it was a Firewire device, I would be all over this with iMovie HD or a HD Video recorder, and just be done with it. Apple may have to come up with some universal driver to accept USB video in since they have dropped FW on some of the new models, but this frame grabber isn't on the list as of now.
No real solution I can find to convert USB to Firewire.
Anyway, I am hoping that somehow I could get into the QT script and just disable the audio recording, like the old "save as Un-editable" script would pullout the "save" function of the QuickTime action.
Of course, dumping the audio tracks after the fact doesn't fix the video; once it's chopped up coming in...
I suspect that the real answer to this issue lies with the frame grabber manufacturer. But, I am still hopeful that the QuickTime Script writers out there (or the Terminal folks) may have something up their sleeves.
Thanks for noticin' me.

Why is audition recording the stereo tracks unequally?

I just upgrade to 3.0 from 1.5 and I must say I have been racking my brain for hours trying to figure out all my problems. I found most by scrolling old posts but this one I cant find. After installing the program I opened a beat in the first track of multiview. I tried recording and I was having latency issues so I took the advice that popped up in a message prompting me to switch to ASIO drivers. I opened the audio hardware tab and selected my mic (02s) (samsung C01U). Now, when I record in stereo the volumes dont record evenly. The left ear records just a little bit louder then the right ear. On the bottom where the mic level are the top bar stays a precise amount away from the lower bar (about 2 inches). So when I record, the top level (left ear) records normal and the bottom level (right ear) in considerable lower. Doesn't sound good. I know I could equalize it using effects but I want it to record evenly. Anyone know how to fix this. I have VIA High Def Sound Card (I think...thats what it says under device manager) and windows 7. I was messing with the settings in my ASIO4ALL control panel trying to fix the latency issues so maybe I screwed something up there. What default setting should I put in the boxes in the ASIO4ALL control panel?

Phate008 wrote:
Have I been recording wrong this whole time?
Yes.
Do people record into mono mics often or do most people use stereo mics? Also why would stereo record equally in 1.5 but not in 3.0?
All microphones are essentially mono. If you have two of them closely adjacent but pointing in different directions in one casing (aka a 'stereo' mic), you will get some sort of stereo from them - depending on how good they are. The vast majority of people use mono mics for single voices though - there is no benefit from using a stereo one for this at all. And there is absolutely zero benefit in recording a mono mic in stereo - it just wastes file space, because both channels will contain absolutely identical information. In fact using a stereo mic pair for recording a single voice is counter-productive - you end up using the variable part of the mic's polar pattern on both mics (not so good), and the slightest physical movement of the vocalist shifts the sound in the mix considerably. This is way easier to control with a single mono mic - the only determinant of where it sounds in the mix is the pan control.
The reason you are experiencing a difference has nothing to do with Audition at all, but everything to do with using a different driver. The present driver for your mic only outputs signal on one channel in stereo mode - which is pretty ridiculous; it shouldn't even have a stereo mode! What you should do is select a mono input - which will say something like [01m] on it in Audition, and use that to record, using the pan control to position the sound in the mix.
In a properly set up stereo monitoring system, a mono source wil appear in a single (vurtual) location between the speakers, depending on where the pan control is set. If this doesn't happen on your setup, then you need to fix the acoustic conditions around the speakers so that it does, otherwise you won't have the faintest clue about what your mixes really sound like.
I'm sorry that this all sounds a bit harsh, but I'm afraid that this is the way it is...

How to separate the 2 stereo tracks?

Similar Messages

Maybe you are looking for