How to separate the PRno and PRitem

hi experts,
              i m working on stxh table,in this table a field name
''Text Name = 001000198700010" IS EXISTING ,here prno and pr item both are attached ,i want to separate both ,what logic sud i use............

Hi
First 10 characters are PR number =   0010001987
next 5 digits are Item no  =  00100
reward if useful
regards,
Anji

Similar Messages

  • How to separate the value and currency

    Hi Experts,
    We have data in report like this 12545EUR
                                                       24521DM
    Now our requirement is  separate the value and currency.
    Can anybody tell me what i do in Query designer.
    Thanks in Advance

    Hi
    NODIM is used in a scenario like u want find the amount of product then the formula for the amount is price * quantity
    AMOUNT = PRICE * QUANTITY
    IN this case the unit for PRICE ,let say EUR and for quantity the unit is EA and say we have price value = 10 EUR and quantity value   = 5 EA
    if u apply the above value in the above formula , then it leads to the value as shown below,
    AMOUNT = 10 EUR * 5 EA = 50 EUR EA
    In this case the units for the amount should be EUR not "EUR EA" in this case we have to eliminate the units for PRICE . so that can be done by using the
    amount = /BIC/NI_AMT * NODIM(/BIC/NI_QTY)
                 = 10 EUR       *   5         = 50 EUR
    Hope u got it,
    Revert back in case of any query ,
    Assign points ,
    Thanx & Regads,
    raviChandra

  • How to separate the source and the measured current

    Hi Everybody,
    I'd like to know if there is some way to separate the source and the measured current and just writte an mathematical expression to make a dependence between the source and the said parameter. Thanks in advance.

    Sure,
    Here is the deal:
    I'd like to build a circuit with dependent sources, but instead of connecting the sense of current/voltage, I'd like to know if there is a way to writte a sentence for the source which is dependent of a parameter.
    For example:
    In this circuit I just wrote an expression for the source and its respective parameter. (8*Io).
    Attachments:
    images.jpg ‏7 KB

  • Flat file having multiple header lines , how to separate the same and pushit into my intrnal table

    Hi Guys,
                    I got an issue , My flat file having multiple header lines
    TPS27RPR  MOME                                      THRIFT (SAVING) PLAN SYSTEM                                           Page    2
    09:54 05 JAN 2014                          List of Contributors w/Company Contributions                           Phase DAY Unit TRE
    Company No: xxxxxxxx - xxxxxxxxxxxxx.
                                                                            Employee/       Employee/
    Employee Full Name/                                                       Company         Company                        Allocation
    Number  ID Number                           PS  PN  End Date        Contribution          Profit        Total Balance   Percentage
    some lines of data and again
    TPS27RPR  MOME                                      THRIFT (SAVING) PLAN SYSTEM                                           Page    2
    09:54 05 JAN 2014                          List of Contributors w/Company Contributions                           Phase DAY Unit TRE
    Company No: xxxxxxxx - xxxxxxxxxxxxx.
                                                                            Employee/       Employee/
    Employee Full Name/                                                       Company         Company                        Allocation
    Number  ID Number                           PS  PN  End Date        Contribution          Profit        Total Balance   Percentage
    in this case how could I separate the header lines from the flat file and update the details to my internal table.
    kindly help me on this issue.
    Thanks and regards,
    M.S.Amirtharajvijay.

    Hi Amirthraj,
    If the flat file is static (if the content within it is same for all) then use the offset concept. First get the contents of the flat file into an internal table and later find the field that has to be in final internal table within the line, calculate the offset for the line and get the value into an workarea. Finally modify/append the work area into an internal table. Also wait for other experts answers for any other hassle free way to achieve the requirement.
    With Regards,
    Giriesh M

  • How to separate file path and file name

    Hi All,
    Is there any FM which will separate the filepath and filename? I have whole string is like /test/test.txt. I want to separate this to two parts one is  /test/ and another is test.txt. How to achieve this?
    Regards,
    Jeetu

    use this FM - PC_SPLIT_COMPLETE_FILENAME or
    'SO_SPLIT_FILE_AND_PATH
    Regards,
    Amit
    Reward all helpful replies.

  • How to separate ims-ms and tcp_local channel

    Since I have serveral domains in one mail store, now we can separate SMTP channel for each domain. But how to separate ims-ms and tcp_local channel for each domain? Now we are on version 6.0 patch 1
    Thanks

    I'm sorry, I don't have a clue what you're looking to do. Often folks ask for a way to do something, without telling us what it is they want to do, and the method requested isn't possible.
    tcp_local is the channel set up for mail to and from the internet. ims-ms is for delivery to the store. They're already separated.
    Please start over, and let me know what your ultimate goal is, and perhaps then, I can help you.
    There is no need to separate anything for separate domains on one mail store. . .

  • How to separate enter GR and return in invoice verification

    Hi: guys
    I have completed GR for purchase order, and then, vendor send me invoice. however, during invoice check, warehouse return goods to this vendor. so I just want enter GR item excluding the new return item. but sap system automatically propose total Qtys/amounts. I cann't manually change Qtys/amounts.
    everybody can tell me how to separate enter GR and return in invoice verification.
    someday suggest me use return PO and 161 movetype to deal with this problem. however, I not think this is a good solution.
    thank you
    Henry

    well the main point of u r problem is that u r not able to change the qyantity /value in invoice
    but system should allow u to change the quantity and vlaue as per standard sap settings
    i think u r user profile is not authorized to do so.........chek the authorization for miro
    u can aslo ue invoice reduction option in miro
    suppose u r vendor invoice u for 100 pc but u have recived only 89 pc as 20 pc u have already returned then u can use invoice reduction option to change the quantity and value and in this case sytem will genrate the credit memo and invoice
    100 pc invoice
    20 pc credit memo
    and ultiamtely u have posted 80 pc invoice
    if any thing not clear then let me know

  • How to separate the Webi executing duration

    Dear experts,
    I'm running a webi report connected to backend BW via universe. Any idea on how to separate the webi executing duration into BO side part, BW side part?
    Thanks,

    Hi Hong ,
    *The overall runtime can be split into 5 different parts (Database, OLAP, MDX, RFC and
    WebIntelligence) .
    *We have to gather the statistics in the SAP BW system. Use transaction SE16 (Data Browser)
    and go to table RSDDSTAT_OLAP
    *Enter User name and UTIME and calendar date object name (Bex query)
    *Press the execute button and you will get the table with all the statistics in SAP BW. Now, you
    have to separate the backend runtimes into database, OLAP and MDX runtime.
    *Gathering the Database Runtime
    Click on the header of the column “EVENTID” to mark the whole column. Set a filter by pressing
    and select the between range from 9000 to 9011.
    *Gathering the OLAP Runtime
    Click on the header of the column “EVENTID” to mark the whole column. Set a filter by pressing
    and select the between range from 2500 to 4999.
    *Gathering MDX runtime
    Click on the header of the column “EVENTID” to mark the whole column. Set a filter by pressing
    and select the between range from 40000 to 40036.
    *Gathering the Single Statistical Records STAD
    To get the memory consumption, Remote Function Calls (RFC) and the details about all the BAPIs
    called during report execution, we need to enter transaction STAD in SAP BW.
    When starting STAD, set a filter on the connection user for the Universe and select the appropriate
    start time and the length of the interval to be investigated (according to the total runtime of the report).
    This will return a set of RFC calls to the backend. Normally, the major runtime influencing part can be
    easily determined by the column “Response time (ms).
    Subtract all this times from Webi report refresh time , we get time taken at BO end.

  • How to separate the music by tracks language

    I appreciate if someone tells me how to separate the music on my iPod by tracks language, example: English, Spanish, etc. I only find classification by Genere, not by language, Thanks

    I cannot thank you enough!
    you have saved me much frustration.
    thanks for taking the time to answer and have a great day!!

  • How to Separate the Instances?

    Hi All,
    Please let me know  How to separate the instance (CI & DB in one Cluster and DI in Failover )
    Thanks in Advance,
    Jayakumar C

    Hi ,
      Can you please explain the present scenario. Is your SAP running in clusture? do u have 2 seperate boxes for Primary and Failover and now you want to run all services in primary and you want your FO to act as a DI?

  • How to know the balance and validity of internet data in iPad

    How to know the balance and validity of internet data in iPad?

    Sir I m using internet in ipad4 with airtel network
    They provide me 2gb data with the amount of 255 rupees
    And now I inserted the sim in my ipad4
    And start the surfing on safari n all
    And now I wanted to know how much data is balance.

  • How to change the name and description of a wim using DISM

    With Imagex we could update the name and description of the wim with on easy command:
    imagex /info img_file [img_number or
    img_name] [new_name] [new_desc]
    e.g.
    imagex /info Win7Combined.WIM 1 "Win7(x86)" "Windows 7 x86"
    Since the ImageX tool is deprecated in Windows 8 and has been replaced with DISM, can someone explain how to update the name and description with one easy command using DISM like we could with Imagex?

    It looks like this person had the same issue. Have you seen this
    link
    It talks about exporting an Index into a new WIM. Which, in a way, would be renaming it. It's really recreating it and you have to give it a name. But it seems to work.
    Dustin Estes - MCP | www.dustinestes.com

  • My iPhone 5 has broken and is being replaced with a new iPhone tomorrow. However, My carrier (orange) will b picking up my broken iPhone and I am unsure how to secure the content and icloud data on the broken phone. Is there a way to display the data?

    My iPhone 5 has broken and is being replaced with a new iPhone tomorrow. However, My carrier (orange) will b picking up my broken iPhone and I am unsure how to secure the content and icloud data on the broken phone. Is there a way to disable the data held on it and ensure that if it is fixed, nobody can use/see my data and access my account?

    Hi Gazpan,
    Thanks for visiting Apple Support Communities.
    I recommend using the steps in this article to back up your iPhone if possible:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    You may also find this advice helpful for your situation:
    What to do before selling or giving away your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ht5661
    If you no longer have your iOS device
    If you're using iCloud and Find My iPhone on the device, you can erase the device remotely and remove it from your account by signing in to icloud.com/find, selecting the device, and clicking Erase. When the device has been erased, click Remove from Account.
    If you're unable to complete either of the above steps, you should change your Apple ID password. Changing your password won't remove any personal information that is cached on the device, but it will make sure that the new owner can't delete your information from iCloud.
    Cheers,
    Jeremy

  • How to change the day and time seen on the calendar

    Hi.
    I am a bit confused as to how to restrict the day and time shown on a calendar.
    The ical help says this:
    To change the days of the week or the number of hours that appear in the main calendar view, choose iCal > Preferences, and make your choices from the Week and Day pop-up menus in the General pane. For example, you can choose to only see the hours from 9AM to 5PM on Monday through Friday.
    However, in my preferences pane, i don't have a either a week or day pop up menu that i can see, so i can't seem to restrict these fields. It's really frustrating as calendars are beginning at 1am!!!!
    Anybody got any ideas?
    Thanks
    David Tobin

    OK, but what did the help menu mean when it said..
    To view the day's, week's, or month's events, click the Day, Week, or Month button at the bottom of the iCal window.
    To change the days of the week or the number of hours that appear in the main calendar view, choose iCal > Preferences, and make your choices from the Week and Day pop-up menus in the General pane. For example, you can choose to only see the hours from 9AM to 5PM on Monday through Friday.
    To change which months are shown in the mini-month calendar (in the lower-left corner of the iCal window), click the arrows above the mini-month calendar. To see more than one month, drag the mini-month divider (the horizontal gray bar above the diamond) upward.
    To see events that are earlier or later in the day, use the scroll bar on the right side of the main calendar view.
    To change the range of time in the main calendar view that is not shaded (representing your "normal" day), choose iCal > Preferences. In the General pane, choose the times you want to appear in white (not shaded) from the "Day starts at" and "Day ends at" pop-up menus. All times outside that range are shaded.
    This suggests that you should be able to limit the hours actually shown on the calendar to a set range as opposed to just changing the shaded area.
    Have you any idea how to achieve this, as i don't see the popup menu suggested with...
    To change the days of the week or the number of hours that appear in the main calendar view, choose iCal > Preferences, and make your choices from the Week and Day pop-up menus in the General pane. For example, you can choose to only see the hours from 9AM to 5PM on Monday through Friday.
    I am confused!!
    Any other ideas?
    David Tobin

  • How to print the Terms and Condition page ine the sap-script

    Hi experts,
                             i got the requirement that how to print the Terms and condition page in the script,i have the three pages, having the same main window, in the last of the main window(all three pages)  i have called the hard coded text(i.e so10 text), but when i am displaying the output  data get printed in the first page but i am getting the second page heading on the top of  the terms and condiions page. In all the three pages i  have the same main window, if i  make change in any window i will affect all the other main  windows.  so please suggest me how i need to go.HOW TO GET GRID OF THE TEXT ON THE TOP OF THE SECOND PAGE OF THE TERMS AND CONDITONS.
    like this i have called in the MAIN WINDOW
    /E : LAST ( IN ALL THREE PAGES)
           INCLUDE ZSD_INVOICE_TERMS TEXT OBJECT TEXT LANGUAGE EN.
    IN THE TCODE SO10
    NEW PAGE TERMS.
    1) TERM MS AND CONDITONS  TEXT.................................................
    FIRST->NEXT, NEXT->NEXT,,   TERMS--->TERMS.

    Hi,
    1. Create a new page by Name : LAST
    2. Identify the text element which will be the last element in the form in the debug mode.
    Mostly Ex: SUM, TOTAL, LAST etc.,
    3. the page linking should be
    First --> Next
    Next --> Next
    4. In the Text element identified in the step 3.
    Write the following code
    /: NEW PAGE  LAST
    /: INCLUDE the standard text created for the terms and conditions in SO10
    Check the syntax for the command but the logic will be the same.
    It should resolve your problem.

Maybe you are looking for

  • Workflow status is missing from the List after make some change in workflow

    Hi, We have this strange situation where the workflow status is missing from List views. Here is the situation: Now if I check the All List view of this list, I can see these workflows that shows the status of the workflow - say "In progress", "Compl

  • Portfolios

    Hi Friends!!!!!, How we can add our Portfolios in the Adobe Future Artists list.If you know anybody, Please tell me what is the process. Thanks Alot...... Hanumanth

  • Only two songs will play teh rest get skipped

    After i put the music on the nano... i try to play a song but it skips them all... i can only play two songs.. and the rest are skipped. please help.. thanks xxx

  • Apple Time Capsule Serial Number Issue

    Can anyone from Apple explain why when you add in a Time Capsule serial number it is recognised on some areas of the site and not on others?

  • Retry count & interval problem

    I am Using OSB R4 where My Scenario is i need to place the payloads in to the JMS Queue, and route them to the Endpoint URI webservice if the service is unavailable i need to sent the notification mail and rollback the payload back in to the Queue. M