How to Sequence IVIEWS in Dynamic Navigation Area....

I have added 3 IViews to the Dynamic Navigation area of my Page. Iw ant to sequence them in proper order.
But its not letting me sequence the IVIews in the Dynamic Navigation area anywhere....
Any Ideas....
Thanks

Hi ,
iViews in Dynamic Navigation are sorted alphabetically based on the ID names given for those iViews in dynamic navigation.
Regards
Vasu

Similar Messages

GenericCreator: How to add iview as Dynamic Navigation

Hi All,
Had anyone used the "Uploading Content and Actions" into the portal via XML file process to add an iview into a page into the Dynamic Navigation portion which will cause the iview to load up on the left panel of the page.
I am able to do this via the Portal manually, but would like to know how this can be achieve using the .xml and the GenericCreator.

Hi Mary,
What I meant by being able to do this manually in the portal, is the process of going into Content Administrator > Portal Content finding the page that I would like to add the iview into. Selecting the page, executing a Right-Click > Edit-Dynamic Navigation. Then finding the iview, Right-Click > Add to Dynamic Navigation.
This will add the iview into the Dynamic Navigation portion of the selected page.

IView errors in Dynamic Navigation area of Page

Hi,
I am developing a Java DynPage iView on EP6.0 SP10 (NW04). The iView functions similarly to the SAP MSS Team Viewer, except that it calls an R/3 Search Help to get a list of employees to display. The iview uses the EPCF framework to generate client side events that are picked up by other iviews on the same page.
Now, the symptoms of my problem: I created a portal page and added the iview to the dynamic navigation area of the page. I have two other iviews that react to the event that is raised by my iview. They are in the general content area of the page. The page is added to my test role as normal. I test the functionality by logging into the portal and accessing the page via the normal portal navigation. Everything works fine, until I leave my session idle for around five (5) minutes. At that point, if I do anything in the iview, I get a runtime error:
"An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
iView not found"
If I refresh the page, everything's ok again. This only happens when the iview is in the dynamic navigation area of the page. If it is added to the general content area of the page, the problem does not occur.
It looks like some kind of timeout value, but I'm not sure where to start looking. My HTTP session is still alive at this point, as is my SSO cookie. And, as I said before, I don't get the error if the iview is not in the dynamic navigation area of the page.
Can anyone give me advice on what to do to fix this problem?
Thanks and regards
Morne Muller

Hi Frank,
Unfortunately I did not get an answer. I am currently busy with other things so this problem is not receiving a lot of attention right now. If I do get an answer, I will post it here. If you are able to fix it on your side, I would appreciate it if you could let me know too.
Regards
Morne

Portal Runtime Error in Dynamic Navigation Area

Hello gurus,
In our production portal all of sudden we are getting a portal runtime error in Dynamic Navigation Area. Earlier there was a problem with one of the clustered nodes and it was resolved. I was wondering if this error is in connection with that. Has anybody faced such problem? Following is the error we are facing in the dynamic navigation area.
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/fenderfolder/defaultDesktop/frameworkPages/frameworkpage/com.sap.portal.innerpage/com.sap.portal.dynamicNavigationArea
Component Name : com.sap.portal.navigation.dynnavarea.DynamicNavigationArea
Please advice on how to resolve the issue.
Thanks in advance.
VR.

Hello all again,
We are not getting this Dynamic Navigation Error on ONE of the clustered nodes and all other clustered nodes are working fine.
Any idea how to resolve the issue?
Thanks in advance.
VR.

IView template for navigation Area

Hi all,
Did someone knows if there is a template or a framework to create special Iview for the navigation area , like page title bar or Masthead iView.
Thanks for your help,
Best Regards
Badr

Hi Badr,
Since u r renaming and making changes, the original files will not be disturbed. U can create iViews from ur new par files and so the original iViews will not be disturbed. I have not tried eventing in those iViews. May be u can try. I think it will work.
Steps:
1. Navigate to pcd folder I mentioned before.
There you can find the reqd par files with .bak extn.
2. Make a copy of the reqd file and rename it like my.new.masthead.par
3. Move my.new.masthead.par to a location outside of the <J2EE-Engine_Instance> somewhere to ur local disk.
4. Extract the files from my.new.masthead.par preserving the directory structure.
5. Modify files in the extracted PAR file.
6. Put the modified files back into my.new.masthead.par.
7. Copy my.new.masthead.par back to pcd folder or deploy the new par file.
8. Now u can create iViews based on these par files.
Regards
Harini S
Message was edited by: Harini Subramanian

IViews in dynamic navigation take up whole content area

Hi,
I'm having a problem using dynamic navigation. I've created two Web Dynpro iViews A and B. I've added B to the dynamic navigation of A and put A into a role. Know when I want to view A, I can see the iViews loading, B in the navigation panel and A on the right of the panel. But once they are loaded, B is shown in the content area, "above" A (effectively hiding it). Once I remove B from the dynamic navigation, A is shown fine.
Any ideas to solve this?
thanks,
Lieven

Hi Lieven!
I can only guess, that the WebDynpro integration-IView is designed to run in the content area alone and forces so.
Did you try to run other (sap provided) WebDynpro iviews from the dynamic navigation?
Regards,
Jürgen

Change positions of Iviews in Dynamic Navigation

Hello,
I made a page and placed the following Iviews in the DYNAMIC NAVIGATION.
1. Group Member list
2. My groups.
When I click on the button "Save" the order (positions) of these Iviews changes. So I get:
1. My groups
2. Group Member List
How is this possible? And how can I change this
Greetings,
GMA
Message was edited by: gema

Hi GMA,
You cannot control the way the dynamic navigation iViews are sorted, except that you can specify that you want them sorted by PCD ID.
See http://help.sap.com/saphelp_nw04/helpdata/en/c6/c6b07fdb2244fb93ad79207bedc923/frameset.htm for more info.
Daniel

Sort of IViews in Dynamic Navigation

Hello,
i have added 3 iviews to the dynamic navigation of a page.
How can i sort these iviews in the navigation-panel? Sort-Priority and Merge-priority are not working for the dynamic navigation. I added I1,I2,I3 to the navigation of the page,but it is displayed I2,I3,I1.
How can i influence the sort behaviour of iviews in the navigation panel?
Marco M.

Hi Marco,
It is not a nice solution but what you can do is to sort it with the iview id e.g.
iView1
iView2
iView3
if you change the iView id of iView3 to aiView3 the sort order will look like:
aiView3
iView1
iView2
Since you do not change the displayname it will still show:
iView3
iView1
iView2
Hope it helps you
Best regards
Rasmus
PS. Do not forget the rewarding points )

How to read data from dynamic work area.

Hi guys,
 I have created dynamic table and work area for report.
i have populated few values in dynamic work area.
Now i want to read that data from work area again for calculation.
i can not use local varialbes to store those values as i dont know how many such variables i need to read.
that will be known only at run time.
So as per my knowledge i have only 1 option...to read those all values from work area.
Kindly help me .... how can i read data which is stored in dynamic work area.

Hi Kiran,
Following is not exact code, but exact solution to your problem:
LOOP AT <dyn_table> ASSIGNING <dyn_wa>.
 l_tabix = sy-tabix.
 ASSIGN COMPONENT 'KOTAB' OF STRUCTURE <dyn_wa> TO <l_kotab>.
 IF <l_kotab> IS ASSIGNED AND <l_kotab> IS INITIAL.
 <l_kotab> = gt_tabs-kotab.
 MODIFY <dyn_table> FROM <dyn_wa> INDEX l_tabix.
 ENDIF.
 ENDLOOP.
I am hardcoding KOTAB as I was sure about that being in the dynamic structure.
You can loop on the field catalogue, which you used to create dyamic table, to use the FIELDNAME to read all the fields of the work area (structure) of your dynamic table.
thanks,
Aabhas
Edited by: Aabhas K Vishnoi on Sep 24, 2009 8:12 PM

Understanding Dynamic Navigation iview.....

In MSS, I have the following workset in my role...
->Team (workset)
   ---+ Team (webdynpro proxy page)
   ---+ Employee information (folder)
   ---+ Employee Working Time (folder)
   etc....
The "Team webdynpro proxy page" has an iview ,"Services", assigned in "Dynamic Navigation" but there is nothing particular about that iView itself. However, all folders (and their contents) below the Team webdynpro proxy page appear in the Dynamic Navigation panel (like "Employee information" and "Employee Working Time"). I do not understand the connection between the dynamic navigation iview and how all folders in that workset know to display in that dynamic navigation area. There seems to be no explicit assignment. How does that work?
edit: a bit more info....the "Services" iview is part of the Common Parts business package and based off the "related services" iview template. Still not sure how it "knows" to display the objects below that page that has it assigned as dynamic nav.

Did you blog about this solution? If so could you direct me to the blog? We need to add numerous links to outside URLs in Related links. I need to order them somewhat differently than alphabetically.
Thank you,
D. Maupin
University of Kentucky

Pass parameter from dynamic navigation iView to WebDynpro iView

Hi All,
I know there are a lot of threads dealing with passing paramters from EP to WebDynpro using EPCM but actually I didn´t find a solution for my problem.
I have in the dynamic navigation area of the SAP Portal an iView based on a JSP dynpage. In the corresponding JSP I fire an EPCM-event:
EPCM.raiseEvent("urn:test.de:wochenb" , "passDataToWebDynpro" , evtData);
In the content area there is a WebDynpro iView. In this WebDynpro-application I subscribe to the event in the wdDoInit-method of a view:
WDPortalEventing.subscribe("urn:test.de:wochenb" , "passDataToWebDynpro" ,wdThis.wdGetDataFromJSPDynpageAction());
and I have an event-handler:
public void onActionDataFromJSPDynpage(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent, java.lang.String dataObject )
    //@@begin onActionDataFromJSPDynpage(ServerEvent)
     IWDMessageManager manager = wdComponentAPI.getMessageManager();
     manager.reportSuccess("EPCM event testing " + dataObject);
//@@end
My problem is now that the event is fired correctly by the JSP Dynpage but the event-handler of the WebDynpro is never executed.
As info: the domain of the J2EE-Server the webdynpro-application is deployed to is identical to the J2EE-Server the portal runs on.
Can anybody help ?
Thanks !
Bernd

Hi All,
I found the solution by myself.
For information: Click in the dynamic navigation fires the event und forces the content afterwards to refresh. During the refresh the WebDynpro subscribes to the event in the wdDoInit-Method. This is to late because the event is fired before the refresh.
My solution is to use a setTimeout before the event-triggering in the dynamic navigation iView.
Regards,
Bernd

WD Java iView & Dynamic Navigation Problem

Hi,
I'm trying to use a WebDynpro Java iView in Dynamic Navigation but have the following display problem:
When I navigate to the page for which I've added the iView to the dynamic navigation, only the WebDynpro iView (from the navigation) is shown. You can see the page in its correct form being loaded but as soon as the navigation iView seems to be loaded/ing it replaces the full lower part of the screen (navigation and content panel).
If I use a plain URL iView in the dynamic navigation the behaviour is as expected.
But if I add a WebDynpro iView or even a page containing that iView I get the strange behaviour again.
I'm running NW04s SP7.
Any ideas?
Do I have to set some properties on the WebDynpro iView?
I've tried a couple of things but none did work so far.
Thanks & Regards
Markus

Hi Henrik,
Sorry for the late reply but I'm just back from vacation.
No, I have not found a solution. I decided to go for an integrated application instead (Main WD application that bundles navigation with other applications). That works but of course is not as "nice".
Have you come across some solution yet?
Kind Regards
Markus

Dynamic Navigation (treeView)

Hello,
knows somebody a good tutorial how to build a own Navigation Tree and fit it in the dynamic Navigation area? Or give me some hints?
I need to generate a TreeView ivew with links to a other iView
thx for beginners help

Hi Amit,
I need to create an iView that displays menu in TreeView dynamically and when i select any node in a tree, it should navigate to that particular link.
How i can do this ?
Yours help will be appreciated.
Regards,
Eben
Message was edited by:
Eben Metilda

Dynamic navigation order

Hi all
I want to change the order in which the iviews appear in Dynamic Navigation for a particular page
I was able to do it in the editor before we applied a patch ( dont know which!!)
version info
6.0.2.27.0.Enterprise_Portal_Support_Package_2
is there a property i can change
thanks
Prasad Badal

Hi Prasad
We have migrated our Dev and QA servers from SP2 to Patch28 and then to SP9 and then to SP11. We have also facing the same issue of Ordering of iViews. Our prod migration is about to go but this ordering of iViews is now becoming a serious issue.
SAP is also not able to reply on what basis the ordering is happening and are buying time for it.
Can you tell me how to order the iViews in details.
Do you have any other solution or workaround in fixing this ordering. We had a sizable amount of iViews in Dynamic Navigation.
URGENT help will be appreciated.
Kindly HELP!!
Regards
Gaurav Gandhi

Dynamic Navigation ivews

In sap help-online doc, it says that "Dynamic navigation iViews typically contain user interface controls, such as dropdown lists and links, which retrieve data related to the content displayed in the content area. Each time a user clicks or chooses a control in a dynamic navigation iView, the data currently displayed in the portal content area changes accordingly".
I assigned a iview as dynamic navigation iView to the other iView in my portal for test .I can see the dynamic navigation iview in navigation panel under detailed navigation area,when I navigated to the iview it was assigned to. But when I click the link on the navigation iview ,its content was displayed in its area and not in portal content area .How to archieve what sap help-online said? Please help me!
Tks!

Hi Shi zi,
This is what you would be seeing in the Dynamic Navigation Editor
Add iViews or pages to "Dyn Nav Iview" as context-specific navigation objects.
Objects selected in this editor appear in the dynamic navigation area at runtime when the object currently being edited is displayed .
Regards
Vineeth

How to Sequence IVIEWS in Dynamic Navigation Area....

Similar Messages

Maybe you are looking for