How to sequence shoot in 5800XM at pre defined int...

Hi
Can guide me as to how i can use sequence shoot in 5800XM at pre defined intervals. The user manual says this is possible but does not state how it can be done?
I really would love to use this feature in the phone and any help will be appreciated.
Thank you

Hi sanjuram15
Whilst in Camera application press the three horizontal bar icon above "Options" > Sequence ( three overlapping rectangle icon) appears top of screen next to camera icon > then press "Camera " icon below Exit and after focussing it acts like a film "motordrive" until you press "Stop"
Unfortunately there doesn't seem to be the scope to alter the timing sequence as on my N95 but I may be wrong!
This is with v40.0.005 firmware by the way.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

Sequence shoot in 5800XM at pre defined intervals

Hello
I need some help. Can some one tell me how to
To capture two or more images in defined intervals, using the sequence mode of shooting in 5800 Xpress music phone.

Hi sanjuram15
Whilst in Camera application press the three horizontal bar icon above "Options" > Sequence ( three overlapping rectangle icon) appears top of screen next to camera icon > then press "Camera " icon below Exit and after focussing it acts like a film "motordrive" until you press "Stop"
Unfortunately there doesn't seem to be the scope to alter the timing sequence as on my N95 but I may be wrong!
This is with v40.0.005 firmware by the way.
Happy to have helped forum in a small way with a Support Ratio = 37.0

How can I pre-define the default selection in a SelectOneChoice?

How can I pre-define the default selection in a SelectOneChoice?
(1) Here's my JSF-code:
<af:selectOneChoice label="#{res['usercreate.input.sex']}"
value="#{bindings.Sex.inputValue}"
binding="#{SelectListBean.sexlist}"
readOnly="false" autoSubmit="false">
<af:selectItem label="#{res['data.sex.women']}" value="1"/>
<af:selectItem label="#{res['data.sex.man']}" value="2"/>
</af:selectOneChoice>
(2): manged bean: to set the default value to be the first in the list, my managed bean as follows:
import oracle.adf.view.faces.component.core.input.CoreSelectOneChoice;
public class MBSListBean {
private CoreSelectOneChoice sexlist;
public MBSListBean() {
public void setSexlist(CoreSelectOneChoice sexlist) {
this.sexlist = sexlist;
this.sexlist.setValue(1);
public CoreSelectOneChoice getSexlist() {
return sexlist;
(3) when i launch the page, it often gives me such warnings:
WARNUNG: Could not find selected item matching value "1" in CoreSelectOneChoice[UIXEditableFacesBeanImpl, id=_id7]
how to solve the problem ?
Thanks,
wzzdx

You could also set the default on your entity or viewobject, in the properties of your attribute.

How to use pre-defined scenarios for RosettaNet with XI 3.0

Hi all.
   I am working in Comgroup Shanghai co. ltd. which is partner of SAP China.
   We have a potential customer who use RosettaNet as their Supply Chain EDI system.
   I would like to make a demo for demostrate the pre-defined scenarios for RosettaNet RNIF 2.0 packages.
   Where can I find such guideline ? I have checked the article: implementing RosettaNet with XI 3.0, but it cannot help me.
   Another question is how I can develop my own scenarios for the RNIF standards which are not included in XI RosettaNet business package ?

Hi Andy,
See the instructions below after you installed the RosettaNet STK.
Below given is the sample config for PIP3B2 Scenario. Part I is using STK and Part II is using 2 XI systems.
<b>Part I. Test Using STK</b>
In your XI ID:
1) Define both the parties 1) Shipper(Your Partner) 2) Receiver(Your company) with identifiers like DUNS Number.
2) In ID goto>Tools>Transfer Integration Scenarios from IR-->select the scenario "PIP3B2_Receiver" from the drop down list.
3) Follow the 4 steps in the config wizard.
4) While creating your CC, create it from the channel template delivered with the RosettaNet BP.
   4.1) Specify the URL for STK which should be in the following format
http://<STK Server>:<port>/rosettanet/servlet/listenerServlet?userId=<Party Name>
   4.2)In the location fields, enter your location and your partner location.
In your STK
1) Start the RosettaNet STK.
2) enter the UserID<Partner Name in XI>
3) Select the Test Scenario, 3B2V01.01-AdvanceShipmentNotification-0001-Scenario-Shipper
4) Enter Global Business ID(DUNS Number) and Location ID for both the partners. These fields should be same as in your R/3 Party configuration.
5) Enter the URL as follows:
http://<XI Server:<J2EE_Port>/MessagingSystem/receive/RNIFAdapter/RNIF
If everything is configured correctly as mentioned, you should be able to test your single-action scenario.
<b>Part II Test using another XI System</b>
For these follow the steps above for XI Config.
Configure one XI System as PIP3B2 Shipper using the Scenario "PIP3B2_Shipper" and config wizard as mentioned above.
Configure the other XI as PIP3B2 Receiver using the scenario "PIP3B2_Receiver" and config wizard.
In the Url field, specify the URL as follows:
http://<XI host>:<J2EE_Port>/MessagingSystem/receive/RNIFAdapter/RNIF
Hope this helps.
Regards,
Sam Raju

My apple tv 2 says I can't stream music from my iTunes library on my iMac without settng up iTunes Match. I don't want to set up iTunes match. How can I get back to the pre-Match system which let me just use home sharing to stream music from computer to A

When I click on the Music tab on my Apple TV 2, a message tells me I have to set up iTunes Match to stream music from my iTunes library on my iMac. I don't want to set up and pay for iTunes Match. How can I get back to the pre-Match system which let me just use home sharing to stream music from computer to Aple TV

Ditto.
You need to look for your itunes library under Computers and select it, then music.
Music column is for web based content not local content, just to confuse everyone.
AC

How can I set up a default (pre-recorded) voicemail greeting on iphone 4s?

How can I set up a default (pre-recorded) voicemail greeting on iphone 4s?i dont want a custom one with my voice i want the pre-recorded where a lady says my number . how do i get that?

Voicemail is a cell phone carrier function. Contact your carrier to see if they have this option. If not, i'm sure you can download a sound file from the internet with a greeting and add your name. Then play it back on you PC while holding your iPhone near the speaker when recording the greeting to voicemail.

How to export multiple copies reoprts based on parameters and with pre-defined naming

Hi All:
I have a problem of using SSRS 2012, we have multiple clients and they wanted us to deliver the pre-defined excel reports to different branches based on selecting the "branch name" parameter, also they have a naming rule for the excel
report file.
We cannot use the subscription as they need to do it in one batch and upload to an FTP file, therefore we are doing this manually for over 300 reports. Is this a convenient way to generate them in one batch as well as customising their file names?
Thanks a lot for your help.
Cheers
Johnny

Hi JohnnyKahWang,
As per my understanding, there are multiple clients, you want to deliver reports to clients according to branch name parameter, and naming the excel file according to the rule. If that is the case, we can use data-driven subscription to achieve your goal.
Reporting Services provides data-driven subscriptions so that you can customize the distribution of a report based on dynamic subscriber data. Data-driven subscriptions use query results to determine the recipients of the subscription, delivery settings,
and report parameter values. At run time, the report server runs a query to get values used for subscription settings. We can use the Create Data-driven Subscription pages to define the query and assign query values to subscription settings. For detail information,
please refer to the following steps:
1. Open Report Manager, and locate the report for which you want to create a data-driven subscription.
2. Hover over the report, and click the drop-down arrow.
3. In the drop-down menu, click Manage. This opens the General properties page for the report.
4. Select the Subscriptions tab, and then click New Data-driven Subscription.
5. Choose a method of delivery, then select data source for the subscription.
6. Specify a query that retrieves subscriber data like below:
CREATE TABLE Name (
BranchName varchar(20),
ExcelFileName varchar(20),
Email_to varchar(50)
INSERT INTO Name values
('Branch1', 'Name1', '[email protected]'),
('Branch2', 'Name2', '[email protected]'),
('Branch3','Name3', '[email protected]');
IF we chose Windows File Share delivery extension, we can define path in the query.
7. Specify delivery extension options like below:
8. Specify report parameters to BranchName.
9. Specify when the subscription is processed, then click Finish to save the configuration.
For more information about Data-driven Subscription, please refer to the following documents:
http://msbimentalist.wordpress.com/2013/08/26/how-to-create-data-driven-subscription-in-ssrs/
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu

I'm getting error messages when I download updates for lightroom and flash for the mac. can't figure out how to trouble shoot.

I'm getting error messages when I download updates for lightroom and flash for the mac. can't figure out how to trouble shoot.

It sounds as if your browser and some of your apps are not color-managed. This is pretty typical. Even IE9 is only partially color-managed.
You can expect color-managed and non-color-managed applications to show you different things with the same images. How different will depend upon how different your monitor color profile is from the image's color profile.
For web publication and most general use, experts usually advise saving images with the sRGB profile. If such images, saved through the Save for Web & Devices function, look different to you than you expect, it may be that your input images have previously been saved in another color space.
You should really try to get your head around color-management by reading more on it. It can seem baffling and it's difficult to understand without some background. A quick web search turns up many overviews. Beware, though, even people writing articles sometimes don't fully understand it.
-Noel

How do you get rid of 'empty' pre-roll time in logic pro 9?

how do you get rid of the pre-roll time in logic pro 9?
My project's start time is 8-bars before any material, or tempos, or anything...
Can't move the start time back to ")" (zero)    STUCK!! at -8
The song now has 20 seconds of dead air time in a pre-roll.
None of these worked or revealed anything...
-tried making a new copy of song
-looked into every track's file information looking for a spurious entry
-tried deleting the time/space

Hi
Check for any Track Automation nodes in the "preroll'.
CCT
Edit
You should note that generally negative (or zero) project start numbers should be avoided at all cost: there are many peculiar behaviour problems associated with them.

Multi-Mapping - JDBC receiver - Multiple stored procedure - How to sequence?

Hi Folks,
We have 7.1 .Done multi-mapping , single source mapped to 5 different stored procedures.
The challenge we are facing here is , these stored procedure is not working sequentially .
i.,e for e.g., 2nd Stored Procedure should start only when first Stores procedure completely finished its turn.
But third procedure getting completed before1 st stored procedure completes .
Highly appreciate if any views on this ? How to sequence and make sure second will start only when first SP complete ?
-- Shiva

Hi ,
Thanks for your reply. all stored procedures are asynchronous one.
If we go for ccBPM , do we need to put wait step ?
- Here we dont know how much time each procedure takes to complete. Requirement is another procedure has to start only when the previous one completes.
--Shiva

Is it possible to enter a serial number in the main sequence, instead of in the "Pre UUT"?

Hello!
Is it possible to enter a serial number in the main sequence, instead of in the "Pre UUT"?
I still want the serial number in the Report.
I also want the serial number as file name of the report.

You can enter the serial number in the main sequence instead ot the "Pre UUT" but there is no reason to do that.
if you still like to input serial number in your sequence You will need to make sure that you update the variable in the process model which stores the serial number ie. RunState.Caller.Locals.UUT.SerialNumber
This is used to generate the report.
the report can also contain the serial number of the uut if you select "New file for Each UUT" under Configure-Report options and in the "Report File name path"
The format of the name of the report will be
[123].txt
"123" was the serial number which I entered.
If you are not happy about the name of the file you can replace Locals.ReportFilePath to contain the right name using a statement step in the process mode
l. If you using the default process model please make sure that you add the statement step after "Determine Report File Path" step in the Process Model.

How to create pre-defined folder in the document sharing iView in a room?

Hi everyone,
As title, I would like to know how to create some pre-defined folder(s) in the document sharing iView in a collaboration room?
Hope you someone can help me~~
Thanks and best regards,
Marcus

Try it like this:
Help with collaboration rooms templates
and here are soem of those docs:
http://media.sdn.sap.com/public/KMKeywords/Collaboration-Room.html
Regards,
Darin

How to create reports with the prompts like the pre-defined reports ?

We are analyzing pre-defined report: Historical Pipeline Analysis. When executed we can see the prompts for Pipeline Fiscal Quarter and Pipeline Fiscal Year.
If we open this analysis I cannot see how this prompt have been built.
If I save this pre-defined report (without any change) to My Folders and execute it from here, the prompts are gone.
I´d appreciate any help.
Antonio

I have the same issue. The prebuilt reports are actually dashboards, which is why the dashboard prompt filters show up.
I'm not sure how they get it to be a link like that on the reports tab (since the link doesn't point to a dashboard URL ).
Any idea how to get this same effect assuming I built the dashboard/prompt around updated report?

How to set pre-defined constants via FXML

Does anymode know how to set a pre-defined constant like javafx.scene.control.Control.USE_PREF_SIZE via FXML when you create a node?
Instead of using a fixed value like this
   <Label text="Last Name:" minWidth="100" />I would like to use one of the predefined sentinel values like this.
   <Label text="Last Name:" minWidth="USE_PREF_SIZE" />The above example does not seem to work and I have the feeling that this is currently not possible at all.

How did you get that working? When I use the following file I only get a warning that "javafx" is not defined.
Defining var A seems to work but it fails on var B. It seems to be impossible to access anything outside the
java... hierarchy. Is there anything else you have to define?
<?xml version="1.0" encoding="UTF-8" ?>
<?language javascript?>
<?import javafx.scene.*?>
<?import javafx.scene.layout.*?>
<?import javafx.scene.control.*?>
<StackPane xmlns:fx="http://javafx.com/fxml" >
     <fx:script>
          var A = java.awt.Component.BOTTOM_ALIGNMENT;
          var B = javafx.scene.control.Control.USE_PREF_SIZE;
     </fx:script>
</StackPane >

How close is the workflow & GUI in PrE 10 to PrE 8?

Actually, I'm not sure I'm asking in the right place - is "Discussion" the same as "Forum"? It's been awhile since I've posted in the forum and things have changed a lot. I seem to be going around in circles. (You know you're in trouble when you don't even know how to use the help forum :).
My one question became two when I tried to use this forum.
1) How close is the workflow & GUI in PrE 10 to PrE 8? Would a PrE8 manual be much use for PrE10? (Note: The last version I worked with is PrE 2 so I should know the basics. I just have to learn where everything is now).
2) I'd like to read through all the questions in the forum, but all I can see are titles under "Trending Questions". Is that the way it is now? I'd like to expand the question list so I can read the first few sentences - is there a way to do that? I used to learn a lot reading through the forums, but titles alone aren't very helpful.

Some links/reading to help
Steve's Basic Training Tutorials http://forums.adobe.com/thread/537685
-v10 http://www.amazon.com/Muvipix-com-Guide-Premiere-Elements-Version/dp/1466286377/
FAQ http://forums.adobe.com/community/premiere_elements/premiere_elements_faq
TIPS http://forums.adobe.com/community/premiere_elements/premiere_elements_tips
Another help site http://muvipix.com/ or http://muvipix.com/phpBB3/
User Guide PDF http://help.adobe.com/en_US/premiereelements/using/index.html
Right click PDF link in the upper right corner and select to save to your hard drive
Also... BRAVO! for asking about how to learn the program before just jumping in !!!

How to sequence shoot in 5800XM at pre defined int...

Similar Messages

Maybe you are looking for