How to serach text via TREX with cryptograph attachment in SAP system?

Dear friend,
In my customer site, all the office document cryptograph.
If cryptograph program is not installed, file cannot be open.
The customer need to search the text in the attached
office file in CRM system through TREX.
Currently, it is not possible cause it is cryptograph.
So, we want to know where should we apply breaking cryptograph. Breaking cryptograph program can be provided by the customer.
I guess it might be applied when compiling or to Trex.
Do you have any case similar with this?
Your recommendation would be appreciated.
Message was edited by:
Ji Eun Kang
Message was edited by:
Ji Eun Kang

Hi
I'd recommend you to use NetWeaver Enterprise Search instead of TREX.
Best Regards,
Luis

Similar Messages

How to assign task to others with an attachment?

Hi All,
How to assign task to other with an attachment and field values in the actual InfoPath form?
In detail, If a InfoPath form has submitted then task should be assigned to a person with an attachment and some field values which are present in InfoPath form.
How to achieve this scenario?
Thanks in advance!

What you describe is a simple approval workflow. SharePoint comes with approval workflows out of the box.
When a task is created to approve an item, it does not need to have the attachment that is already in the item. The task will contain a link to the item that needs to be approved, so there is no need to duplicate the file attachment.
You may want to read a bit more about the out of the box approval workflows in SharePoint. Start here:
Understand approval workflows in SharePoint 2010
cheers, teylyn

How To send DMS(Documents cv01,cv03n,cv04n) from one sap system to othersap

Hello Experts,
I am working Document management system(CV01,cv02n,cv03n,cv04n)...
I want to send the documents from one SAP system to Other SAP system
Using ALE/Idocs....
Please Help on this any sample programs....or function module....
Thanks
Preethi

Hello,
Please refer to the thread:
How To send DMS(Documents cv01,cv03n,cv04n) from one sap system to othersap
Best Regards, Murugesh AS

Down-/Upload files via Web Services using a NON-SAP system!?

Hello,
is it possible to down-/upload files via web services using a NON-SAP system!?
Regards,
Jens

Hi Jens,
I am not sure about your requirement here. What i could understand is that you want to check whether service could handle file processing?
1) Uploading file - You can build a Webservice which has import/export parameters as the file structures and implement the proxy class in such a way that the passed data is written to application server.
2) Downloading file - Same as uploading file, but the proxy class would have the code to extract data from the application server and pass them as output parameter.
Functionality of Non SAP system: The system which calls these services should be able to convert the output of proxy data into file in case of downloading the file and it should be able to convert the file data into export parameters in case of uploading file.
Hope this helps.
Regards,
Prasanna

How to align text in margin with text in document

I am using InDesign CS3 and am trying to figure out how to add text to the left of my document where there are figures and tables (so I can later create a table of figures and table of tables). I cannot get the text "Figure 1", "Figure 2", etc. to line up horizontally in the left margin with the figure I placed in the center of the document. What am I doing wrong?

> What am I doing wrong?
It's hard to say what you're doing wrong without first knowing what
you're doing. How are you trying to line up text with figures? In what
way does it not work?
Kenneth Benson
Pegasus Type, Inc.
www.pegtype.com

Has anyone tried to sync photos with the cable to itunes rather than how it should work via Wifi with iCloud? The info on the Apple support page says that you should backup to both iTunes & iCloud, but 2x the Genius Bar told me not to. Help please!

Has anyone tried syncing their photos to iTunes with the cable in addition to how it should work via wi-fi on iCloud? On the Apple support info page, it says you should do both types oof backup. The Genius Bar told me 2x not to do both. What experiences has the community had? I'm also having syncing issues with photos most recently as well as contact updates. (I have an iPhone 4S with the iOS7.1) Thanks much!

It sounds like you are mixing up several different things (or not using the terminology that Apple uses).
One thing is backup. You can backup via icloud or via iTunes and there is no reason you cannot do both -- I do and the second link below from Apple gives instructions. Doing a backup will include photos from the Camera Roll in the backup but you will not be able to see the results -- all of the backup data will be stored on iCloud or on your computer in files that are not designed to be accessed by you for any purpose other than restoring to your phone in the event of a problem. More information on backup:
http://support.apple.com/kb/HT1766
http://support.apple.com/kb/HT5262
If you simply want to transfer photos from an iPhone to a computer, the terminology Apple uses for that is "import" and it is done without iTunes. New photos (taken after you change the setting) can be done via PhotoStream which is a cloud based option. The other option is via cable. Instructions for both: http://support.apple.com/kb/ht4083
Syncing via iTunes (with regard to photos) is used to transfer photos the other direction -- from the computer to the phone. Instructions for that http://support.apple.com/kb/HT4236

How to make text clicks go with the volume?

My old iPod 3G used to make text typing sounds according to my volume. So if my volume was off there would be no text noises but with my new iPod touch the texting sounds are there regardless. What do I do?

Roxpat wrote:
I'm beginning to consider learning other applications (Dreamweaver and/or specific languages), so feel free to offer those up as well.
roxpat ~ Since your web site content is community oriented, you may be interested in this free, web-based site builder for social networks:
http://about.ning.com/product.php
...Their Events feature lets members know about upcoming playgroups, coffee mornings, etc. related to your social network's theme. Read more here.
You may want to consider hyperlinking from your iWeb site to a Ning site to provide some specific feature that iWeb doesn't offer.

How to use a Web Template with queries from multiple BW Systems?

Hi all,
can anybody help me how to use a Web Template with queries (DATA PROVIDER)in it from multiple BW Systems?
Thanks in advance, best regards
Frank

Great! Thanks for the quick response.
Have you tried this for XMLA datasources created within the EP system also?
i.e use Web Analyzer to create a view from the XMLA source and use that view within WAD?
Thanks.

How do I move a clip with transitions attached on the primary storyline?

One more frustrating problem with the mysterious magnetic timeline: on the priumary storyline I created a text clip with a gap clip on each side, then added cross dissolve at the beginning and end of the clip so that it fades in and out to black:
Now I want to reposition this text in the timeline, mantaining the fade in/out at the head and tails. In FCP7 this was simple as a gap in the timeline simply showed black and the clip could be moved as one piece. In FCPX when I try to move the text clip with the P position tool, the transitions disappear after repositioning. Extremely frustrating:
If I select the clip and the fades together, plus the gap clip at the end, and move them together with the Position tool then the fade out is retained, but the fade in still disappears. I've also tried rolling from the fade in from the gap clip before it, but instead of rolling the clip ahead this shortens the fade (I think the behavior of trimming and rolling transitions is totally wacky). The trim tool is also useless in this situation as you can only select one edit point at a time with it.
The only solution I found is to cut the gap clip before the transition, then move the text clip and transitions with the P tool. This will create two abuting gap clips before the text clip, but allow the transitions to remain intact. Not hard, but annoying to have to do
Often I have to adjust the position of a text clip in the timeline like this after adding the transitions to get the timing right. Is there any way to move the clip while retaining the transitions at the beginning and end? It would be so much easier to be able to roll the edges of the gap clips so that I didn't have to make extra edits and workarounds.
The problem seems to be that the gap clip acts as like a regular black slug video clip in some cases, but not in other case. When you move a clip in the primary storyline a gap clip is automatically created to fill a gap -- okay, fine. But you can roll the edges of a video clip with the P tool, but not a gap clip. ***?
I'm using the latest update, 10.0.8. I will be submitting this to Apple as well....

I am trying to move the text clip forward with the transitions still attached. The difference is that in FCP7 you can leave a gap before a dissolve and it will fade in from black. If you move the text clip, the dissolve moves with it, still attached.
In FCPX however, the gap has to be a gap clip. So the dissolve is attached to both the gap clip and to the text clip. Once you put the dissolve on the edit point, there is no way to move the text clip forward or back on the timeline without deleting the dissolve. Or, if you move the clip forward or back with the Position tool (necessary to create a gap) then the transitions just disappear.
Basically, I am looking to roll the transition with the clip.
I could use the opacity handle on the text clip (using "show video animation") in stead of a dissolve, but then I have no control over the shape of the dissolve curve and I'd have to add extra handles to the text clip to center the dissolve where I want it.
Regarding "I very seldom use the position tool. Rolling the gap clips can be done with the regular arrow tool - *that* is one example of the magnetic timeline working for you."
This is true, but clips behave differently when you you roll with the P tool vs the A tool. With the A tool, other clips are magnetically rippled forward or back on the timeline to maintain their relative relationship and avoid all gaps. With the P tool, video clips maintain their position on the timeline, creating or trimming gap clips when a gap is created or filled. The problem arises when a transition is attached to the clip you are moving or trimming.
I understand in priniciple why it behaves the way it does, but it's inconvenient in this case, and inconsistent with the normal behavior of gap clips when a transition isn't involved.
In my mind the transition should be anchored to the video clip, not to both the video and gap clip when there is a transition between the two.

How to send text file as an email attachment havin more than 255 characters

My requirement is to generate a text file and to send this text file as E-mail attachment. I am using FM 'SO_NEW_DOCUMENT_ATT_SEND_API1' to send the E-mail. but here the limitation is the number of characters per line must not be more than 255 characters whereas in my case it is exceeding 1000 characters per line. could anyone please suggest me what should i do now ? Each field in the text file has to be tab delimited.

Simplest might well be to use javamail API instead of the two tags that Sites provides, e.g. see email - Sending mail attachment using Java - Stack Overflow for a full example.
Phil

How to find the list of different material in other SAP system.

We have two SAP different systems. there is an integration between two systems.
One system has 2 millions materails (parts) and other system has 6 millions materails (parts).
I need to know the list of what are those 4 miilions of materials in the other sap system .
How can I find out the list of the 4 millions additional material list ?
Can you please help me .
YOUR HELP WILL BE HIGHLY APPRECIATED.
Thanks in advance.

Hi,
Compare two different environments/systems in t.code: SCU0 . Also you can try with OY19
Regards,
Biju K

How to see the list of Negative wagetypes in a SAP system

Hi
I want to see the list of all wagetypes where the user enters negative number, Is there any standard report or Table where can i find these, please provide the path.
please help
Regards
Sangitha

Hi Sangitha,
Are you talking about wage types for IT0014&15? You can check table PA0014 and PA0015 via SE16 with the condition that amount < 0. Export the resutl to Excel and group the wage type from Excel sheet, then the list will be what you want.
Regards,
Jim

HOW TO SEND THE REPORTS AND THROUGH XI TO NON -SAP SYSTEM

Hi Experts,
I want to know how to send the reports and smartform through xi to another system. All the post blogs are just explaning only about the FILE-TO-FILE, FILE-TO-IDOCS scenarios only.

Hi,
XI is the middleware that to be used to transfer the data between various systems and even you could design the Business Processes with it.
In R/3 the smartforms, are generally converted to PDF and then have to send it across to Non SAP systems. Similarly you can convert the smartforms to pdf format and keep it on application server. XI will pick up that pdf and will send it to Non SAP system either as mail or as an attachments.
ABAP reports are normally used to re-present the data. If you need to transfer this data across the Non SAP systems then you have the IDOCs to be generated, RFC or ABAP Proxy to integrate this data with Non SAP system.
XI is not restricted only upto file to file or file to IDOC scenarios. It have enormous capabilities to involve various Business Processes as well integrate various SAP or Non SAP systems.
If need anymore specific details, please let us know.
Thanks
Swarup

SCOT - How to send a mail from mail server to a SAP system

Dear SAP colleagues,
With SCOT you can configure the SAPConnect administration.
You can easily configure your SAP system to allow the send of email from SAP to your mail server.
Exemple :
1. SID SAP : DL1
2. Mail server : sn1exch.lec.local
3. Target email : "myeamailaddress"
Send email process 01 : 1. DL1 ==> 2. Mail Server ==> 3. You read your email in your inbox "myeamailaddress"
My problem :
From my inbox "myeamailaddress", I want to be able to send email to SAP (Dl1).
Send email process 02 : 1. My inbox "myeamailaddress" ==> 2. Mail Server ==> 3. SAP (DL1).
Question :
Do you have any help to configure it ?
Thanks in advance for your input.
Best regards
NetWeavAdmin

Dear Olivier,
I do not have a specifi technical problem.
Let's summarize - my request concerns a SRM Workflow :
I am ordering an article. When the order is higher than 2'000 USD, I need to get the approval of my manager.
That's the workflow.
Workflow :
1. I am user in DL1 SAP System.
    UserName : CharlesN
    In SU01,
    charles(a)green.com
2. From DL1 SAP system, I order articles. The order total amount is higher than 2'000 USD.
    In the workflow, an mail from DL1 is automatically send to my manager in his MS-Outook inbox.
    (manager(a)green.com)
3. My manager reads the mail I have sent him and give his approvals by clicking on a approvals button.
    When clicking the button, an mail must be automatically send from my manager MS-Outlook inbox
    to DL1 to CharlesN inbox in SBWP in DL1 SAP system.
I have configured SCOT and read OSS Note 455140.
The SAPconnect virtual host is activated in DL1 (SICF).
I think a miss a step in our mail server to relay a mail from MS-Outlook to my SAP system.
Any suggestion is welcome.
Best regards

How to send texts via bluetooth linked PDA

I would like to be able to send text messages from my PDA via my bluetooth linked Nokia 6320i.
Please can anyone tell me how to do this or recommend any software for my WM5.0 PDA to be able to do it?
Thanks,
Stuart

23-Apr-2008 08:58 AM
psychomania wrote:
It can't be done.
The 6230i doesn't have the ability to move messages by bluetooth and I don't think WM5 has it either.
That's a downer.
I was wondering if there was any third party software out there that anyone used for PDA - I can send messages from my PC using the Nokia PC Suite, connecting my phone by bluetooth. It would be really useful to do the same from my PDA.

How to serach text via TREX with cryptograph attachment in SAP system?

Similar Messages

Maybe you are looking for