How to set a default document type in EasyDMS?
Hello,
I want to set default document type for some users. Whenever they check in a file a defined document type should be chosen.
Hi,
Just to explain, whenever we checkin , first the document type is determined and then the file is added. So at the beginning the system cannot know the file format or workstation application.
So from my point of view maybe a solution could be to use the BADI DOCUMENT_MAIN01 with method BEFORE_SAVE to change the document type in reference to the involved entries in table DOCFILES.
I hope that this information could be useful for you.
Regards,
Deepak Kori
Similar Messages
-
How to set a default Billing type for a particular Delivery type
Dear All,
How to set a default billing type for a particular delivery type.
My requirement is, we are creating delivery for a Stock Transport Order. Delivery type is NL and the Purchase order type is UB.
When we are creating Billing, it should take Billing type "ZSTO" by default, which is the customised Billing type.
Where we have to do this setting?
In case of normal sales order, this control will be available in the Sales order document types.
In case STO, how to set a default billing type for a delivery type (NL).
Regards,
RajeshThere is a customization available here no default or hard coded
Normally in a sales doc type we mention which billing type system has to pick
If the billing happens from a PO which billing type system will take depends on the controls set in the areas mentioned below
Go to your delivery type OVLK (say your delivery type is NL)
In that there is a field called default order qty in the order reference tab (say if you maintained DL there)
This DL is called PSEUDO order type
Then in VOV8 for DL based on the billing types mentioned ,system will take the billing doc
For delivery related billing say if you mention say ZF8 in the details of DL in VOV8(provided you have created ZF8)
Then while you bill the delivery doc of NL system will take ZF8
For intercompany delivery you can create ZIV billing type also Pure customization
PO is linked to delivery type ( MM spro settings)--Del type linked to order (pseudo) type---in order type (pseudo) we mention the billing types. Here the flow is bit different that pure SD flow
Though the invoice is crated by manually putting customized Biiling Type and A/Cing doc also generated, but in the VF04 still system shows the same deliveries pending with Billing Type (F2).
This manual is not reqd if the said assignments are done properly
Hope it can assist you.
Thanks & Regards
JP
Edited by: J Prakash on Jun 23, 2010 4:05 PM -
SRM 4.0- How to set the default values for product type (01) only for SC
The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF -
How to set the default value of an item type DATE PICKER to the day of yest
Hi
How to set the default value of an item type DATE PICKER to the day of yesterday ?
Thank you very much !
Christian.Hi Christian,
Have a look at this thread Re: Default the Date Picker to Today
It covers this issue in detail.
Regards
Paul -
How to set my default application...not working
My company has nearly all adobe applications installed from PageMaker 6.5 through InDesign 5.5. We use them all frequently. I'm trying to set my defaults on the Mac Pros and it is not working.
Specs if Needed:
OSX 10.6.8
Model Identifier: MacPro5,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 2.8 GHz
Number Of Processors: 1
Total Number Of Cores: 4
Memory: 6 GB
Boot ROM Version: MP51.007F.B01
+BootCamp dual boot Windows 7
We proof out all files in the version that it comes to us. Our customers are on different versions than the most current, and it's driving us crazy that we can't set the defaults for
each Adobe application. For Instance,
We want for Defaults:
Photoshop = CS4
InDesign = CS4
Illustrator = CS5
etc.
The Finder will not allow us to make the change to open all of a certain file type in the version we want by default. We also use a third party application that allows us to "double
click" InDesign files and open them in the correct version. This saves valuable navigation time and because of the OS's problem with using the correct icons, it also saves us time
dealing with the "Untitled" document when we accidentally convert by opening in the wrong application by mistake. We have gone through Onyx utilities and massive permissions
troubleshooting to no avail. Does anyone know how to set the default for ALL files of a type for Adobe Apps? This has been thoroughly tested and is not working on 10 plus
machines, and only effects Adobe apps.
Any Ideas?I think you miss understand the question. There is a problem with OSX 10.6 and Adobe Apps. 10.5 ok, not sure about 10.7 because of all of the other Adobe problems we downgraded the test machine that we used for the upgrade. There is no way that I have found to make the files “Double-Clickable” through assigning a default application of files with Adobe extensions. We already have an app. that we use and it worked fine until 10.6. I can’t just approve a division-wide purchase of software for a bug that may be solvable by other means (by the way supposed cost of the licensing Soxy is deceiving at $20. Not for us. For companies it’s $20 per platform & also for each time Adobe updates. When we swap out hardware, we have to pay $40 again . Their pricing is absurd). $40 x a couple hundred machines every 18 months or so, uugh! The ten or so I’m working with are just the ones in my immediate department.
I know you have good intentions with your reply and I appreciate it, however I’m looking to solve the problem, not put a band-aid on it. If the problem is by design so Rorohiko can hold companies hostage, then I guess we’ll just have to deal with the few extra clicks it takes to figure out which version we’re in need of, and dragging to the launch bar.
Thanks very much for your reply,
Seth -
How to set a default value in dropdown list in Wendynpro ABAP? Help!
Hi Experts,
I have Webdynpro for ABAP application that shows a DropdownwithKey UI element.
1. I am able to populate the dropdown list. But by default the list is not showing any value. Only when I select a value from the list then it shows it.
So how to set the default value to the first value in the list? Any code sample will be really helpfull.
I have written the following code:
method WDDOINIT .
DATA:
node_category TYPE REF TO if_wd_context_node_info.
node_category = WD_CONTEXT->GET_NODE_INFO( ).
node_category = node_category->GET_CHILD_NODE( 'CATEGORY' ).
data: LT_VALUESET type WDR_CONTEXT_ATTR_VALUE_LIST,
L_VALUE type WDR_CONTEXT_ATTR_VALUE.
L_VALUE-VALUE = 'V1'.
L_VALUE-TEXT = 'yesterday'.
INSERT L_VALUE into table LT_VALUESET.
L_VALUE-VALUE = 'V2'.
L_VALUE-TEXT = 'today'.
INSERT L_VALUE into table LT_VALUESET.
L_VALUE-VALUE = 'V3'.
L_VALUE-TEXT = 'tomorrow'.
INSERT L_VALUE into table LT_VALUESET.
node_category->SET_ATTRIBUTE_VALUE_SET(
NAME = 'CAT_VALUE'
VALUE_SET = LT_VALUESET ).
endmethod.
Note that: I am using webdynpro for ABAP.
Thanks
GopalI am not sure how it works in Web Dynpro for ABAP, but in Web Dynpro for Java to set default drop down value you will have to set the value for particular attribute (which is linked to the dropdown element) in the context
like
wdContext.currentContext<nodeName>Element.set<FieldName>(<defalut value>)
This generally done in Initialization method of the controller. -
Can I set a default alert type in iCal?
For some reason all new events in my iCal (whether I create them, or someone invites me) have two alerts set by default:
1. Email (10 minutes before)
2. Message (10 minutes before)
I don't want either of these as my default, but I can't figure out how to change it. Is it possible to set a default alert type/time?
Macbook Pro
OS 10.7.2
The calendar in question is CalDAV (from Google calendar)Hi,
In iCal the default alarm type is "message with sound". You cannot change the type of alarm but you can change the offset of it.
Now that you say it is a Google calendar, information for setting default alarms on Google Calendar: Change your default notification settings : Google Calendar Help
Best wishes
John M -
Default document type for FB50L
Hello Guys,
When i am trying to post a document through T.Code FB50L with ledger group ZL (Non-Leading Ledger)
The t.code FB50L is picking DocType SA by default. I need a separate DocType ZL for posting to non leading ledger.
How do i default DocType for FB50L.
Regards,
SKHello AP,
I want to Default Document type for FB50L.
The config part, it is done.
Any how i the issue is closed. I can change the document type at the posting
Regards,
SK -
How to set as default current year & period in variant
Hi SAP Guru,
Can anyone help me on how to set as default the current year and period in variant. I want to do a background job for our program using save variants. But I need the period and year to always be assigned what ever is the current year and period.
Hope someone can help.
Thanks
Daboi- Create variables for variants: use transaction STVARV. You should create one variable for fiscal year with type 'parameter', one for period with type 'parameter', one for fiscal year 'select option' and one for period 'select option'.
- when saving your variants for the different programs, fill the checkbox 'Selection variables' in the attributes for fiscal year and period; use the button 'selection variables' for choosing the variables created in STVARV.
- When closing the period, you should use STVARV for changing the variables. All the variant using the variant variables will then automaticaly use the new value. -
Hi,
I have an XML file, which I'm opening with the Excel application. The stylesheet I use is horizontal.xsl.
The problem arised when the XML has data in the format "1/4" or "1/16", which is translated in the Excel as date (like "01/04/2007").
I think I have to set the default cell type to "Text" instead of "General". Does anyone know how it can be done?Is this the same question as idoZo, if so jigg has already answered it. If not then you should post your own query not hijack someone elses giving a clear and concise question, "how to set it??" doesn't help you or other in the forum to provide you with a solution.
Is this relevant to TestStand? If it is then help by providing which version you are using and what software you are using with it. If not then post your question in the correct board.
Regards
Ray Farmer -
Default Document type for ME21N
Hi,
I have lokked thru numerous posts on this issue but couldn't resolve. in IMG I blanked out default document type from NB and cleared Personal settings. Now the default document type is 'Dummy Purchase Order' which is first in the drop down list. Tried to maintain Parameter BSA = Blank. didn't work. Went back and checked the defaults in personal settings now instead of blank 'My Purchase Order' appears. Clear it again save it and check again it;s back in there. My objective is to have a blank in Default document type when ME21N is executed. Any help is much appreciated.
regards
SimDear Parampreet kaur,
I know you can do this configuring the personal user setting once i've logged in the system. The drawback of this solution is that you've to config. this stuff for all users in the system.
You can do that clicking in a colored button in the top right corner of the screen.
I hope someone bring here a better solution then mine.
Regards,
Rodrigo -
User Exit for MIRA to default document type
Is there any user exit in MIRA ,which can change the default document type .Because normally the document type is defaulted in the customization ,all the user exits which are available have the incoming structure (INVFO) in which the document type(INVFO-BLART) is coming as IMPORT parameter (e.g. EXIT_SAPLFDCB_001),hence it cannot be changed .
I would like to default the document type based on company codes .
Please let me know if there is any other way of doing this.>
Rahul Saxena wrote:
> I have given the condition"BSEG-ZTERM = 'ZTST'" in Prerequisite, and in the Substitutions when I try to assign constant value '02/16/2009' to the field Baseline Date, I don't see that Baseline date field in Substitute fields for Class '009'.
>
> How do I add Baseline date in that popup to select and assign values.
>
> Please suggest.
>
> Thanks-
i think your date format and system date format is not suitable.
give the date format as 20090216 as system format. -
Defaulting document types for a particular company codes.
Dear All,
Is there a way to default certain document types to particular company codes, so that when ever if we enter that particular company code then automatically the default document types has to come. I tried to check for configurations but could not. Please let me know how to achieve this scenario.
Regards
SrikanthHi,
No, does not seem possible to me without development...
Regards,
Eli -
How to set a Default Value in the drop down on Account Creation ?
Hi,
i have to set a default value in the drop down as soon as a User in a particular business role clicks on New Account. I have written the following code in do_prepare_output method. But this code is executed in the 2nd server round trip after entering some value or pressing enter. so i am not getting as soon as user clicks on the New Account.
How to set that default value when user clicks on New Account ? and where should i code ?
IF lv_icwc_profile = 'ZCSALESPRO' or lv_icwc_profile = 'Z_SALESPRO' .
try.
lr_entity ?= me->typed_context->header->collection_wrapper->get_current( ).
lv_current = lr_entity->create_related_entity(
iv_relation_name = 'BuilRolesRel' ).
lv_current->set_property(
iv_attr_name = 'PARTNERROLE'
iv_value = 'BUP002' ).
CATCH cx_sy_ref_is_initial cx_sy_move_cast_error
cx_crm_genil_model_error.
return.
ENDTRY.
Thanks and Regards
Raman KhuranaHi,
I have some idea abt it, it is also used in account life cycle.
Please refer SAP note 1097651, Defaulting a life cycle stage.
Let me know if useful.
rgds,
Vinay -
How to set a default value in Select one choice.
Hi
I'm using ADF BC, in that how to set a default value in select one choice.
pls. help on this.
regardsset the default value on the underlying EO or VO attribute
john
Maybe you are looking for
-
Error occured while uploading the data for Tocde QP01 (BDC)
Hi, I am facing a strange problem i.e. when i try to upload the data for the Tcode QP01 i am able to upload the data for the 18 rows but when it is more than 18 ,it gives the following error and saves the data upto 18 rows only :- CALL_TRANSACTION QP
-
JDK 1.4.2 Collections.unmodifiableMap() thread safe?
Hello, doesn anyone know if the call to Collections.unmodifiableMap() is thread safe. Thanks Marc
-
I am trying to write a simple servlet that based on the client ip redirect to a new page. I can get the client ip and return it. But what I am not sure how to do next is to take that ip address and search through the text file and return the second f
-
ANy ideas how to stop the itv player from crashing?
-
I have a few podcasts to which I subscribe, but I don't necessarily automatically download them. I would download old archived content here and there to go along with the new episodes I was listening to on a regular basis, and didn't want to have to