How to set a default firefox homepage on client workstations on a network with a server running windows 2003 server?
I am running a small client server network with about 27 client machines and windows server 2003 is the server OS. I want the default webpage on firefox to display our department homepage when users log on. I have set IE7 already in the groups policy in the ISS section but this only affects IE7. Any idea how I can do this with Firefox?
You can set or lock default prefs via a mozilla.cfg file.
Pref: browser.startup.homepage , see http://kb.mozillazine.org/browser.startup.homepage
defaultPref(); // set new default value
pref(); // set pref, but allow changes
lockPref(); // lock pref, disallow changes
See http://kb.mozillazine.org/Locking_preferences
Similar Messages
-
How To Enable NAT in Windows 2003 Server to wireless connection mobile or computer
Situation: I am an administrator of company . I’m getting my internet services through a
DSL connection. I’m using Microsoft technologies; hence, my server is Windows 2003 Server. I want to distribute internet(wireless) to all the computers or mobiles through the main server by routing and remote access
Main server is 192.168.1.10
Default gateway(ip of router linksys) is 192.168.1.1
How can i do that and which setting i will use
please help meHi,
So you don’t have a NAT device and want to use windows server 2003 RAS role as a NAT?
Windows server 2003 could work as NAT.
How to configure Network Address Translation in Windows Server 2003
http://support.microsoft.com/kb/816581
But I’m a bit curious with your gateway. I guess windows server 2003 connect to internet via your default gateway. If so ICS is another solution:
How To Set Up Internet Connection Sharing in Windows Server 2003
http://support.microsoft.com/kb/324286
At last, buy a wireless router could be a better solution.
Hope this helps. -
How to install 11.5.10 on VMWare with Windows 2003 Server?
Need help on installing 11.5.10 on VMWare which runs Windows 2003 Server.
I've XP Pro laptop with 2GB RAM and 80GB HDD and external HD with 250GB. Gathered all required s/w for installation.
The Win 2003 Server VMWare is sitting on the external HD. I want to install pre-req s/w along with 11.5.10 on the VMWare.
(1) How do I make the laptop's CD drive and HD visible to the VMWare?
(2) Can I use the XP laptop HD as staging area and install on VMWare on external HD?
(3) What are the disadvantages/risks of using the external HD for both staging and actual installation?
Any help is appreciated.
FYI - we already have an Oralce 11.5.9 on VMWare. All services are up and running. Able to logon to SQL*Plus and EBS home page. The issue is, we are not able to connect to this Oralce VMWare image from other VMWare image(Siebel), ie, if we do a telnet to oracle vmware image connection establishes and closes immediately. No clue on why this is happening. But this is not happening when we did telnet from a vmware image(plain win 2003 server) that does not have Siebel. All vmware images work fine individually.
Any inputs?
Thx,
JagsNeed help on installing 11.5.10 on VMWare which runs Windows 2003 Server.
I've XP Pro laptop with 2GB RAM and 80GB HDD and external HD with 250GB. Gathered all required s/w for installation.
The Win 2003 Server VMWare is sitting on the external HD. I want to install pre-req s/w along with 11.5.10 on the VMWare.
(1) How do I make the laptop's CD drive and HD visible to the VMWare?
(2) Can I use the XP laptop HD as staging area and install on VMWare on external HD?
(3) What are the disadvantages/risks of using the external HD for both staging and actual installation?
Any help is appreciated.
FYI - we already have an Oralce 11.5.9 on VMWare. All services are up and running. Able to logon to SQL*Plus and EBS home page. The issue is, we are not able to connect to this Oralce VMWare image from other VMWare image(Siebel), ie, if we do a telnet to oracle vmware image connection establishes and closes immediately. No clue on why this is happening. But this is not happening when we did telnet from a vmware image(plain win 2003 server) that does not have Siebel. All vmware images work fine individually.
Any inputs?
Thx,
Jags -
SRM 4.0- How to set the default values for product type (01) only for SC
The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF -
How to set a default value in dropdown list in Wendynpro ABAP? Help!
Hi Experts,
I have Webdynpro for ABAP application that shows a DropdownwithKey UI element.
1. I am able to populate the dropdown list. But by default the list is not showing any value. Only when I select a value from the list then it shows it.
So how to set the default value to the first value in the list? Any code sample will be really helpfull.
I have written the following code:
method WDDOINIT .
DATA:
node_category TYPE REF TO if_wd_context_node_info.
node_category = WD_CONTEXT->GET_NODE_INFO( ).
node_category = node_category->GET_CHILD_NODE( 'CATEGORY' ).
data: LT_VALUESET type WDR_CONTEXT_ATTR_VALUE_LIST,
L_VALUE type WDR_CONTEXT_ATTR_VALUE.
L_VALUE-VALUE = 'V1'.
L_VALUE-TEXT = 'yesterday'.
INSERT L_VALUE into table LT_VALUESET.
L_VALUE-VALUE = 'V2'.
L_VALUE-TEXT = 'today'.
INSERT L_VALUE into table LT_VALUESET.
L_VALUE-VALUE = 'V3'.
L_VALUE-TEXT = 'tomorrow'.
INSERT L_VALUE into table LT_VALUESET.
node_category->SET_ATTRIBUTE_VALUE_SET(
NAME = 'CAT_VALUE'
VALUE_SET = LT_VALUESET ).
endmethod.
Note that: I am using webdynpro for ABAP.
Thanks
GopalI am not sure how it works in Web Dynpro for ABAP, but in Web Dynpro for Java to set default drop down value you will have to set the value for particular attribute (which is linked to the dropdown element) in the context
like
wdContext.currentContext<nodeName>Element.set<FieldName>(<defalut value>)
This generally done in Initialization method of the controller. -
How to set a Default Value in the drop down on Account Creation ?
Hi,
i have to set a default value in the drop down as soon as a User in a particular business role clicks on New Account. I have written the following code in do_prepare_output method. But this code is executed in the 2nd server round trip after entering some value or pressing enter. so i am not getting as soon as user clicks on the New Account.
How to set that default value when user clicks on New Account ? and where should i code ?
IF lv_icwc_profile = 'ZCSALESPRO' or lv_icwc_profile = 'Z_SALESPRO' .
try.
lr_entity ?= me->typed_context->header->collection_wrapper->get_current( ).
lv_current = lr_entity->create_related_entity(
iv_relation_name = 'BuilRolesRel' ).
lv_current->set_property(
iv_attr_name = 'PARTNERROLE'
iv_value = 'BUP002' ).
CATCH cx_sy_ref_is_initial cx_sy_move_cast_error
cx_crm_genil_model_error.
return.
ENDTRY.
Thanks and Regards
Raman KhuranaHi,
I have some idea abt it, it is also used in account life cycle.
Please refer SAP note 1097651, Defaulting a life cycle stage.
Let me know if useful.
rgds,
Vinay -
How to set a default value in Select one choice.
Hi
I'm using ADF BC, in that how to set a default value in select one choice.
pls. help on this.
regardsset the default value on the underlying EO or VO attribute
john -
How to set a default value to t-list when creating t-list programmatically
hi,
I'm creating a t-list programmatically
by calling
n = populate_group('groupname');
populate_list('form.list','groupname');
In this case how to set a default value for the t-list
thanks
raniI am not sure how it works in Web Dynpro for ABAP, but in Web Dynpro for Java to set default drop down value you will have to set the value for particular attribute (which is linked to the dropdown element) in the context
like
wdContext.currentContext<nodeName>Element.set<FieldName>(<defalut value>)
This generally done in Initialization method of the controller. -
How to set a default value for particular field in SRM PO Portal
Dear Gurus,
Im desparetly need a help in web dynpro on how to set a default value for a field(flag) in PO header tab in portal.
My requirement is whenever the user press the edit button in PO screen,automatically a flag field should be set as abap_false.
I dont think this will handle in check badi or change badi. i tried this part in onbuttonpressed overwriteexit in CNR_VIEW views,i can get the function EDIT in debugging mode,but dont know how to proceed further.....
Many of them suggested to go with get attribute and set attribute for changing any particular field in web dynpro,but im not very familiar in using those get and set attributes.I request you people can give me sample code on how to identify my target field in the node and set the values while pressing EDIT Button.
Thanks in advance...
Regards,
SathishDear Laurent,
Thanks for your response,
But i searched in enhancement spot of WD_BADI, but couldnt get the exact way to change the coding,
My real requirement is, that particular flag should be enable and disable dynamically by checking a condition in my header values.So in that case i dont know how to proceed further to handle in the PO screen.
Kinly guide me how to get the particular node of field in the Purchase order screen.
Thanks you in advance,
Sorry for the inconvenience if any
Regards,
sathish -
"I would like to know how to set the default view for the columns that are shown in iTunes. Every time I open it, I have to either go to the options, or right-click to get the pop-up options, and delete "rating" and add "composer." I'd really like to just do it once and be done with it." Somewhere I read you could do this by clicking on the Music icon under LIBRARY then arramge the columns. Trouble is, I can't find a Musi Folder or icon in my user library.
Any help would be appreiated. OSX 10.9.2 iTunes version 11.1.5 Thanks!!! CW!From the iTunes menu bar try View>Show View Options. Make sure what you want to see is checked and what you don't is unchecked. You can do this (may need to do this) for any playlists, your main Library, etc.
Good luck
srb -
How to set the default text in an input box or a label to be a predefine, multiline text
how to set the default text in an input box or a label to be a predefine, multiline text. In other words how to break the line in the code of a text box.
thank youThere are a couple of ways of doing this:
If you're editing on the canvas, press Shift + Enter.
If you're working in Express View (see lower right hand corner of Project Siena), you'll need to copy a hard return from another app such as Notepad.
I believe a better implementation of hard returns are in the list of requested functionality that you can find here:
https://social.technet.microsoft.com/Forums/en-US/2e1f9446-56b2-419a-9c17-7037d2cd6146/from-the-community-overview-of-requested-additional-functionality?forum=projectsiena
Thor -
How to set the default selection to "Select All" in a Multi valued parameter in SSRS 2008?
Hello Everyone,
How to set the default selection to "Select All" in a Multi valued parameter in SSRS 2008?
Regards
Gautam S
RegardsYou need to specify "Default Values" in the report parameter property. Choose similar option used in the "Available Values" option, this will allow the parameter to check "Select All".
Regards, RSingh -
How to set the Default values for Info Objects in Data Selection of InfoPac
Hi All,
Flat file Extracion:
How to set the Default values for Info Objects in Data Selection Tab for Info Package
ex: Fiscal Year Variant Info Object having values 'K4' 'Y2' etc in Flat file
Initially default value(not constant) for this info Object value should be 'K4' in Info Package
If I set data selection value for this info object K4 it will retreive records with this selection only? how to handle
Rgds,
CVHi,
suppose as your ex. if you are having fiscalyear variant in the dataselection tab then specify K4 in the from column, again the ficalyearvariant row and click on insert duplicate row at the bottom . you will get another row . In that enter Y2 in the from column. now you can extract K4, y2 values .
haritha -
How to set my default application...not working
My company has nearly all adobe applications installed from PageMaker 6.5 through InDesign 5.5. We use them all frequently. I'm trying to set my defaults on the Mac Pros and it is not working.
Specs if Needed:
OSX 10.6.8
Model Identifier: MacPro5,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 2.8 GHz
Number Of Processors: 1
Total Number Of Cores: 4
Memory: 6 GB
Boot ROM Version: MP51.007F.B01
+BootCamp dual boot Windows 7
We proof out all files in the version that it comes to us. Our customers are on different versions than the most current, and it's driving us crazy that we can't set the defaults for
each Adobe application. For Instance,
We want for Defaults:
Photoshop = CS4
InDesign = CS4
Illustrator = CS5
etc.
The Finder will not allow us to make the change to open all of a certain file type in the version we want by default. We also use a third party application that allows us to "double
click" InDesign files and open them in the correct version. This saves valuable navigation time and because of the OS's problem with using the correct icons, it also saves us time
dealing with the "Untitled" document when we accidentally convert by opening in the wrong application by mistake. We have gone through Onyx utilities and massive permissions
troubleshooting to no avail. Does anyone know how to set the default for ALL files of a type for Adobe Apps? This has been thoroughly tested and is not working on 10 plus
machines, and only effects Adobe apps.
Any Ideas?I think you miss understand the question. There is a problem with OSX 10.6 and Adobe Apps. 10.5 ok, not sure about 10.7 because of all of the other Adobe problems we downgraded the test machine that we used for the upgrade. There is no way that I have found to make the files “Double-Clickable” through assigning a default application of files with Adobe extensions. We already have an app. that we use and it worked fine until 10.6. I can’t just approve a division-wide purchase of software for a bug that may be solvable by other means (by the way supposed cost of the licensing Soxy is deceiving at $20. Not for us. For companies it’s $20 per platform & also for each time Adobe updates. When we swap out hardware, we have to pay $40 again . Their pricing is absurd). $40 x a couple hundred machines every 18 months or so, uugh! The ten or so I’m working with are just the ones in my immediate department.
I know you have good intentions with your reply and I appreciate it, however I’m looking to solve the problem, not put a band-aid on it. If the problem is by design so Rorohiko can hold companies hostage, then I guess we’ll just have to deal with the few extra clicks it takes to figure out which version we’re in need of, and dragging to the launch bar.
Thanks very much for your reply,
Seth -
How to Set Automatic Default Time in Calendar
Friends,
When I create new event in calendar (by double clicking on a specific date) for example Group Dinner, the calendar autotatically set the start time at 8PM.
How to set the default time to 7PM for example.
Thanks
Regards,
akostamanOk It seems not just a problem of 24 hour time appointments that won't sync but all appointments I make on my iphone in calendar won't sync to calendar on my mac?
Maybe you are looking for
-
IPod Shuffle seen as iPod Nano in iTunes 6 and won't load music
I had iPod shuffle linked to one computer, then changed computers. Tried loading iPod software from installation disc and iTunes 6 then looking at iPod. Initially got message indicating that iPod was linked to another computer - did I want to change
-
iMac internal drive locks up after trying to play a DVD. CD's work properly. All preference settings are correct. I have tried several different DVD's that work in other drives. Drive is : HL-DT-ST DVDRW GA11N. After spinning wheel of doom goes away,
-
Can't Authorize ADE 3.0 on Windows 8.1 64 bit - Error is E-Auth Not Ready
Hi, The laptop is brand new, never had ADE authorized before. I've had this problem on other PCs as well and haven't been able to solve it. Sharon
-
Xdo jar files not compatible to j2ee / jre 6.0?
Hello, we are using JRE 6.0 to develop a nice webapplication and we want to use the BIP inside the application. suddenly it is not possible to combine java.util.Hashtable<String, String> with the required com.sun.java.util.collections.Hashtable. com.
-
My accelerometer not working so screen doesn't switch when u turn it round what can I do?
Screen doesn't switch around when I turn my iPad.is it broke?