How to set a default page setup in P6?

Hi,
Anyone know how to set a default page setup in P6?
Thanks,
Manuel

Hi Manuel,
For printing, the settings are stored within the layout. If you have one layout containing the settings you use, you can then use this layout as your template and do a 'Save As' every time you make your changes.
Hope that helps
David

Similar Messages

How to set the default page size ?

Hi there,
I just bought a 15.4" Macbook Pro.
When I use Safari to surf, I found that the image/fonts are to small for my liking.
So I did VIEW > ZOOM IN two times & the image/fonts & it become satisfactory.
But after I shutdown & restart the laptop again, I find that whenever I startup, the page in Safari when back to the smaller setting & I have to click VIEW > ZOOM IN twice again .
My question is how to make this settings permanent ? It is irritating having to do VIEW > ZOOM IN everytime I start up the system !!
Any ideas ?
Thnaks

In Safari, go to Safari >> Preferences. Click on the Appearance tab. Set the standard and monospaced fonts. That not only sets the default fonts for web pages (many web-sites will specify other fonts), but also the default sizes (though web-sites can specify alternate sizes). Also, on the 'Advanced' tab, there's a checkbox labeled 'Never use font sizes smaller than' followed by a drop-down. This permits you to prevent the text from going beneath the specified size.
The advanced tab also permits you to provide a CSS stylesheet to apply as the default. If you know CSS, this can be very powerful.

How to increase Firefox default page zoom setting?

Changed my computer's default DNS server from Comcast to OpenDNS.
A side effect, webpages appear in Firefox as if I had reduced them via the Ctrl minus keys. To get back to a comfortable appearance I now have to hit Ctrl plus keys.
Anybody know how to set Firefox default page zoom to a larger setting? Thank You.

Try in [http://kb.mozillazine.org/About:config about:config]
and change [http://kb.mozillazine.org/Zoom.maxPercent zoom.maxPercent]
type in the address bar '''about:config'''
then press the button '''i'll be careful i promise'''
then type in the bar '''zoom.maxPercent'''
then '''right-click''' on it, select''' modify''', type a value greater than the current(i can't tell specific because i don't known how zoom you want), click '''OK,'''
exit firefox and restart-it.
see also: [http://kb.mozillazine.org/Zoom.minPercent Zoom.minPercent]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Setting Book Default page in runtime

Hi All,
How to set Book Default page in runtime.
My requirement is based on loged in user group name we have to go to that page, in book there are four pages default is 3 page. based on user login we have to go the pirticular page.
Thanks,
Venkaata Sarvabatla

Hi
I have a similar requirement but the problem i am facing is that the control of the program does not go into the handlePostbackData() method of the desktop backing file. the URL i call from the login JSP is something like: "/../../myDesktop.portal" where myDesktop.portal is the desktop portal file having books and pages. Page1 is the default but based on an input i need to redirect to Page2 instead of landing on the default Page1. I wanted to give the redirect logic in the handlePostbackData() method but the control does not go into the method. I also tried giving sth like : "/../../myDesktop.portal?_nfpb=true&_pageLabel=Page2" but it still renders the (default) Page1.
Do you have an idea what would I be possible missing out on or doing wrong here. Thanks.
I am using struts portals.
Thanks
GT
Edited by: 929390 on Apr 23, 2012 7:03 AM

How do I set a default page size, orientation, and printer for a particular document in Pages?

I have a simple label document in Pages which I print to my label printer. The label is 1.49 x 3.47 inches and needs to print in Landscape, and it needs to print to my Dymo label printer. How do I set up the Page Setup or Print Setup so it defaults to this document size, orientation, and printer, every time, without me having to manually enter those settings every time?

Thank you for your reply. However, I could not get Templates to work correctly for me. Following your instructions, I opened my document, opened Page Setup, set the printer, paper size, orientation, and printed a copy to make sure it was right. Then I re-opened Page Setup to verify that the settings were still correct. Then I saved the document as a Template. Then I found my template in Pages, opened the template, and tried to print. The first thing I noticed was that the template did not remember my printer. Then I set the printer, and printed, but I found that the template also did not remember the page size or the document orientation. So, did I miss a step here? Lion 10.7.5 and Mac Mini.

How to set the default context value for flexfield in OAFramework pages

Hi,
I have a page which contains a contexxt value field i.e Flexfields
To select the context value we have to select the value from drop down
So Here we want to display the context value immediately when the page is called
How to set the default valu in this case
Regards,
Krishna

You can set the Attribute category view attribute to the Flexfield context value and call prepareforRendering in the flex bean. Check the dev guide for details.
Regards
Sumit

Pls advise on how can i set my default page

may i know how can i set my default page if i m using Apache as my web server n tomcat as my servlet container. thank u in advance

hi....i tried but cannot.
even when i jus change the "DirectoryIndex Index.html" to "DirectoryIndex abc.html it still gives me the page which shows the file in my directory of htdocs.
i guess if someone can advise me on how to change away this page first....
thank u

Firefox 4.01. I wish to have "Mozila Firefox S tart Page" as Start Page. I have used "How to set the home page" (tools, options, general, restory to default) but no result.

# Numbered list item

The part you are probably missing is
When Firefox starts: "Start my Home page" (in the dropdown)
the installed default home page is about:home in Firefox 4, but simply choose the "Restore to Default",
then click on the "OK".
see [https://support.mozilla.com/kb/How%20to%20set%20the%20home%20page How to set the home page | How to | Firefox Help]
If that is not working then try instructions , and following the instructions suggest taking a picture of your toolbars first, so that you will be able to recustomize your toolbars afterwards, see [http://kb.mozillazine.org/Corrupt_localstore.rdf Corrupt localstore.rdf - MozillaZine Knowledge Base]
After resetting, continue with [http://kb.mozillazine.org/Toolbar_customization Toolbar customization - MozillaZine Knowledge Base] and if you used small icons -- don't forget the checkmark for that in the dialog.

How can I change the default page setup for printing messages in Apple Mac Version 4.6 (1085)

How can I change the default page setup for printing messages in Apple Mac Version 4.6 (1085)

As soon as I posted, Ifigured this one out on my own by going into user settings and changing the default there. Then I was able to delete the default @mac account. Thanks!

How to set a default "from" field on outgoing Mail message

i read through the last few pages of this support forum and googled my topic but i havent found a suitable solution.
in Mail v 3 (3.4) there is a "From:" field in any outgoing mail. very useful for those of us with multiple non-accounts and/or .Mac aliases. i generally set a specific outgoing mail server (so that field is removed from outgoing email).
my problem is how to set a default outgoing email address so that my recipients always get from a certain (eg work) email address when i am at work. at work, anything i send, i want to show my work email without always having to manually select the "FROM" field in the outgoing email.
( aside: i had read that Mail version 3 was supposed to auto-select any reply so that the reply would come from the same email i orginally sent as. this does not work on my mac.)
This problem is exacerbated as Mail auto-rotates between my 4 email accounts/aliases (which are all listed (correctly) in the FROM field. it would be great if this list could be fixed with a default FROM address.
eg i send an email from my work email address (FROM: [email protected]) the next email i send will be rotated through my list of .mac aliases. i.e. the next email i send will not be from [email protected], but from [email protected] the next time it might move on to [email protected] or it might revert to [email protected]
any thoughts on how to fix?
i have tried deleting the home/library/preferences/com.apple.mail.plist. that is fine, but any .mac aliases (which i do use, but i dont want to be listed in the "FROM" field) are listed in the "FROM" field, and are auto-switched through my Mail again.
i looked through Rules and Automator, but no obvious help there. any thoughts?

Did you try Preferences > Accounts > Account Information and entering these other email aliases in the Email Address: field, separated by commas? That would give you a pop-down menu in the New Message window letting you choose which alias to use when sending an email.
If you go to Preferences > Composing, there should be a pop-down menu near the middle of that window labeled "Send new mail from:" which will let you choose any email address you have entered in the Account Information field mentioned above, or "Account of last viewed mailbox" as the default.
Mulder

With recent update of Firefox, I can no longer set the default page, it always reverts back to the Mozilla page, why?

Why can I no longer set the default page to something else? Every time I open Mozilla Firefox, it always reverts back to the Mozilla page. No matter how many times I do this, it always reverts.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Inability for Safari to quit or set home default page

Is there a workaround to get Safari to quit? Also how to go about setting a default page? The other thing that Safari lacks is the ability to have a choice to save your username and passwords for secure sites. Safari seems to just keep the username and password automatically. How insecure is that.

Pogue said the same thing to me when I emailed him about the inability to quit the first open web page, and as a non-tech person I am finally beginning to understand the point. But seems to me you still need a home page so that you can get the red "x" delete to appear on all other open web pages (e.g., there are some pages that a person might not want to remain open). Your point is you can get the equivalent of a home page by editing your bookmarks so "NY Times" or whatever is at the top. Thanks for straightening me out on this.

How to set up huge Pages on sles 10

Does anybody know
How to set up huge Pages on sles 10
in order to use large memory ?
I need a description or how to .
Thanks
Peter Schläger

Metalink Note:317139.1 explain , how to setup hugepage and configure Very Large Memory and big SGA for Oracle RDBMS.
- Virag Sharma
http://virag.sharma.googlepages.com

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

How to set a default value in dropdown list in Wendynpro ABAP? Help!

Hi Experts,
       I have Webdynpro for ABAP application that shows a DropdownwithKey UI element.
1. I am able to populate the dropdown list. But by default the list is not showing any value. Only when I select a value from the list then it shows it.
So how to set the default value to the first value in the list? Any code sample will be really helpfull.
I have written the following code:
method WDDOINIT .
DATA:
    node_category TYPE REF TO if_wd_context_node_info.
node_category = WD_CONTEXT->GET_NODE_INFO( ).
node_category = node_category->GET_CHILD_NODE( 'CATEGORY' ).
data:    LT_VALUESET type WDR_CONTEXT_ATTR_VALUE_LIST,
           L_VALUE type WDR_CONTEXT_ATTR_VALUE.
L_VALUE-VALUE      = 'V1'.
L_VALUE-TEXT    = 'yesterday'.
INSERT L_VALUE into table LT_VALUESET.
L_VALUE-VALUE      = 'V2'.
L_VALUE-TEXT    = 'today'.
INSERT L_VALUE into table LT_VALUESET.
L_VALUE-VALUE      = 'V3'.
L_VALUE-TEXT    = 'tomorrow'.
INSERT L_VALUE into table LT_VALUESET.
node_category->SET_ATTRIBUTE_VALUE_SET(
             NAME = 'CAT_VALUE'
             VALUE_SET = LT_VALUESET ).
endmethod.
Note that: I am using webdynpro for ABAP.
Thanks
Gopal

I am not sure how it works in Web Dynpro for ABAP, but in Web Dynpro for Java to set default drop down value you will have to set the value for particular attribute (which is linked to the dropdown element) in the context
like
wdContext.currentContext<nodeName>Element.set<FieldName>(<defalut value>)
This generally done in Initialization method of the controller.

How to set a default page setup in P6?

Similar Messages

Maybe you are looking for