How to set a different default font

Is there a way to set a different font other that Myriad Pro as the default font so that you don't have to continually reset it for every field or label???

During import, Designer attempts to match fonts in the PDF file with fonts that are available on your computer. If the file contains an unavailable font, Designer displays a dialog box showing the missing font and a suggested replacement. You can accept the replacement font or change it.
This font substitution is not permanent. Designer must map the unavailable fonts every time the form opens. You can make the font substitution permanent by selecting File > Save As and then selecting Permanently Replace Unavailable Fonts before saving the file. This method is recommended for permanently substituting fonts.
You can also set up a font-substitution table in the file ConvertPDF_FontMap.txt in the Designer installation directory. If you add a font-substitution rule to this file, all occurrences of the substituted font are changed to the new font when you import a PDF, regardless of the font-mapping table and regardless of whether the substituted font is available on your computer.
ConvertPDF_FontMap.txt is empty by default. Each entry you add should have the following syntax:
input_font=Designer_font
where input_font is the name of the font used in the input PDF file, and Designer_font is the name of the font that is installed on your computer. Asterisks (*) represent wildcard characters. For example, the string *Cour* refers to all font names that contain the string Cour. Question marks (?) represent single-character wildcards. Adding wildcard characters before and after the input_font name accounts for any slight variations in the name of the font in the form. For example
*Arial*=Arial
*Helv*=Arial
*Cour*=Courier New
*=Times New Roman
Processing occurs in descending order. The last line in the example converts all remaining fonts to Times New Roman.

Similar Messages

How to set up different ring tone for Facetime

how to set up different ring tone for Facetime

I don't think that on an iPhone that FaceTime has a separate setting, you can only set a ringtone (which will apply to phone calls) via Settings > Sounds, or set different tones for different contacts via the Contacts app - but you can't have a separate sound for FaceTime

HT201684 In Yosemite this no longer works, has anyone figured this out? How to set a custom default umask for all applications?

In Yosemite this no longer works, has anyone figured this out? How to set a custom default umask for all applications?
I've tried everything to get a custom umask set for all apps. It just seems impossible...
Is there a replacement for launchd-user.conf?

Please file a bug report: https://bugreport.apple.com
I am sure this is something that got lost, like environment variables, in the Yosemite/iOS merger.

How do I select a default font to compose E-mails?

How do I select a default font (Comic Sans MS) to use when I compose an E-mail?

Tools menu (Alt+T) > options > composition.
What computers actually have Comic Sans MS to display your mail? Is it a web safe font?
My understanding is Comic Sans MS is available on Windows and MACs, but not on Linux or Android. So not a good choice if someone might be reading on a phone

Set and retain default font setting for Convergence

Is there an nwsmextendeduserpref for setting the default font for Convergence when composing a mail?
I tried meFontFace=Tahoma,Verdana,sans-serif but that didn't work
Anyone know the answer?

eolair wrote:
Is there an nwsmextendeduserpref for setting the default font for Convergence when composing a mail?No. There is an existing Request-For-Enhancement to have this functionality added in a future version:
RFE#6759946 - "End users should be able to set their own default font and fontsize in compose"
You will need to raise this RFE with your Sun Account Manager.
Regards,
Shane.

How do I set a new default font in CS6 for ALL documents

I've seen in many discussions on here how to change the default font for new documents, but no one has addressed the idea of how to make it so that you have a preferred default font that overrides Myriad for any document you open. Is that even possible? I receive files from many different sources and most people just stick with Myriad. I need to change that font constantly in documents to Helvetica Bold and want the type tool to just stay there unless I manually change it myself. Any ideas?

mrsmeed,
You may follow the instructions here (follow the link with that name, and remember to work on the preference file with illy closed):
Working with the AIPrefs/Adobe Illustrator Prefs file
You may try with Helvetica-Bold (instead of just Helvetica for Helvetica Regular); as you can see there may be a bit of trial and error to find the exact name.
If you do, I should be thankful if you will report back so I can add the right name in that hint.

How do you change the Default Font setting for a HP 6310 all-in-one?

I've had this printer for a couple of years and has worked great, but just recently, the main body of text is shadowed, like a shadow font. If i print from MS word and select my font it prints great, but the default font for printing emails and anything off of the web has this shadow

It has no style so seems to be beyond the user's control.
I've tried changing it to something else and redefining the Free Form style, but it doesn't apply when you create a new comment.
The closest you'll get to what you want is to have a Style that you like and apply it to every comment when you open it, using an FKey shortcut.
Peter

How can I change the default font in Messages

In Messages the default font for outgoing messages is set and grayed out so I cannot change it, how can I modifiy the font and it's size?

Hi,
Message Menu > Preferences > Messages section.
In here you can change the Font (And Colour it), change the Balloon (or background to IM if using different style) and override incoming fonts and colours.
11:16 PM Friday; September 21, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and and iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How do you change the default font in Illustrator CS5?

I have upgraded my Illustrator to CS5 and my default font has changed to a strange font. In Photoshop and InDesign, I was told that all you have to do is change the font in the Character menu to the font that you wish to be set as "default" and it will be the font that you always start with.
NOTE: Does this mean that if I use a different font in a different document, the font will stay that font unless I change it back? Isn't there a way to make a particular font the font that I would always what I start with? All this setup means, is that the "default font" will always be whatever the last font that was being used was. There has to be a way to make a default font that I will always start with no matter what the last font that was being used was.
Illustrator gives you no option on font type, unless a file is open. Then, if you change the font and close the file, next time you start a file, it will go back to what is was to begin with. There has to be a way to change the default font for all of these programs to where the font always stays the same unless you change it. Mine is just set to use a weird font that I would probably never use.
I just never thought it would be that big of a deal to change default settings for the font.

Okay, I basically made three different documents and I made sure that I had everything chosen in each. I then saved the three to that file and they now appear in the list:
Settings for all 3:
72psi, 150psi and 300psi
Rulers Visable
Times New Roman
12pt
14.4pt
I then went in and started three new documents. I used the three different New Document Profile's that I made and they all had Rulers, their sizes were correct, but the font stayed Myriad Pro. Did I miss anything? And, Yes, I did change the font and the setting before I saved them in the New Document Profile.
One other thing, I did create a file in the folder, but it was spelled incorrectly. I then went into the folder, erased it and made a second. Then, I went to open it in IllustratorCS5 and it was still listed. I went to the file and it wasn't there anymore, but it was still listed in the New Document Profile. Is there a way to get it off of the list or is all I have to do is restart Illustrator?

How do you change the default font in Outlook 2013?

I am trying to set the default font in Outlook 2013 as per the customer's request and am having no success.
First I create a NormalEmail.dotm file and added it to the Office Customization Tool, created an msp and added it to my package. After installing Office 2013 I check and the NormalEmail.dotm
is on the machine in %appdata%\Microsoft\Templates folder waiting to be loaded. When launching Outlook 2013 on first run it renames my NormalEmail.dotm to NormalEmail15Pre.dotm. I created the file in Word 2013 so it's not a 2010 version and it (NormalEmail15Pre.dotm)
open cleanly in Word 2013 (it does not open in compatibility mode). If I close Outlook and rename NormalEmail15Pre.dotm back to NormalEmail.dotm Outlook opens and uses my template without any issue. This is not a solution as I have 1000's of deployments
and can't do this manually. One other thing, I did have this same problem with the default font in Word 2013 but by implementing a registry setting (HKCU\Software\Microsoft\Office\15.0\Word\Options\MigrateNotmalOnFirstBoot = 1) it used my Normal.dotm
template on first run, if such a setting exists for Outlook I can't find it.
Also I did try to set the font through the mailsettings (HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Common\MailSettings) in the registry as we did with O2007 and O2010 but
those do not load into Outlook when tweaked.
http://blogs.technet.com/b/odsupport/archive/2009/04/24/how-to-deploy-specific-fonts-in-office-2007.aspx
Thank you for your help.

Hi, I found out how you can set it.
You need two registry keys to be set in order to keep the preloaded settings.(HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Common\MailSettings)
These are:
[HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Common\LanguageResources]
"LangTuneUp"="OfficeCompleted"
"OutlookChangeInstallLanguage"="Yes"
both are String entries.

Simple question: How to set a different image to each side of a 3D cube?

Hi all,
I'm very new in the use of Java 3D and I would like to know how to set, in a 3D cube, for each side a different image.
Currently I've the code to set an image as texture of the cube, but it applies the same image to all the sides. However, I would like to use different images for each side.
This is my code: http://pastebin.com/sexBx57K
Any clue?
Thanks!

I think I worked it out.
I just have to set the JAXP parser
Q. How do I use a different JAXP compatible implementation?
The JAXP 1.1 API allows applications to plug in different JAXP compatible implementations of parsers or XSLT processors. For example, when an application wants to create a new JAXP DocumentBuilderFactory instance, it calls the staic method DocumentBuilderFactory.newInstance(). This causes a search for the name of a concrete subclass of DocumentBuilderFactory using the following order:
1. The value of a system property like javax.xml.parsers.DocumentBuilderFactory if it exists and is accessible.
2. The contents of the file $JAVA_HOME/jre/lib/jaxp.properties if it exists.
3. The Jar Service Provider discovery mechanism specified in the Jar File Specification. A jar file can have a resource (i.e. an embedded file) such as META-INF/services/javax.xml.parsers.DocumentBuilderFactory containing the name of the concrete class to instantiate.
4. The fallback platform default implementation.

How can I change the default font for the Text Tool in CS5?

Does anyone know of a SIMPLE way to change the default font in CS 5. I can't believe how difficult Adobe makes this. I have spent numerous time on the internet trying to solve this problem. Any help would be greatly appreciated. Thank you

Thanks Charles, I'm not sure where preferences are, I wish photoshop would
look at this, there should be a simple way to set font preferences. Perhaps
CS 7 will offer a solution. Thanks for your help
On Thu, Nov 29, 2012 at 3:08 PM, charles badland

How do you change the default font in indesign cs3 on a mac?

Hi, I have tried closing all indesign docs and then changing the font in the font menu to helvetica (from times), then opening a new document and it still gives me [Times (TT)] when i draw a new text box and write something in it.
I have tried quitting indesign and reopening it and its still the old default font of [Times (TT)] - which is also not an available font on my machine.
I have also changed my basic paragraph style to helvetica from times, and it still doesnt change the default font when i open a new document.
When i open a new document in indesign it comes up with helvetica in the character pallet as the font, its just when i go to draw a text box and write something in it that it writes it in Times.

Is it possible you have more than one text frame object style, or that you have some default paragraph style set other than [Basic Paragraph]? If you are only editing Basic Paragraph and your default text frame is set to another syle, or you have another paragraph style selected when you begin typing, you might see this behavior.
If not, try resetting your preferences. Replacing InDesign Preferences

How to set up different virtual LANs (using the E3200)?

Hi.
I would like to set up different virtual LANs (using the E3200) so that I can have two different networks that can't access each other.
The E3200 is connected to a modem for internet access.
I would like both networks to have access to the internet.
Does the E3200 alone support creating virtual LANs?
If not, is there another way I can meet the requirement using the E3200 alone (using something other than virtual LANs)?
I'm ultimately thinking that I would need at least one other router.
So for example,
Router A (E3200) is connected to the modem and setup for DHCP using a LAN IP range 192.168.1.1/24.
Router B is connected to Router A and setup for DHCP using a LAN IP range 192.168.2.1/24.
In this way devices connected to Router A should not have access to devices connected to Router B and visa-versa, correct? For example, Device X connected to Router A cannot ping or browse files on Device Y connected to Router B and visa-versa, correct?
Would I need to setup anything else on Router B? For example, do I need to setup DNS settings so that devices connected to Router B can connect to the internet without issue? Would I need to specify that these virtual LANs are not bridged, and on which router, or both?
I already know how to set up a static IP, DHCP, LAN IP ranges, and static DNS settings on a router, etc.
In regards to wireless devices, I am thinking they would follow the same pattern; so wireless devices connected to Router A (E3200) have access to other wired and wireless devices connected to Router A but not to wired or wireless devices connected to Router B and visa-versa. However, if wireless devices currently don't have access to wired devices also connected to Router A, then that is fine for now.
Thank you very much!
-Rami
Solved!
Go to Solution.

The E3200 has no VLAN support according to the manual. There's no way to configure two separate networks with this router alone.
You will need to add network electronics.
Ex:
Managed Switch with VLAN
Another wireless router with VLAN
If your modem supplies multiple public or private IP addresses then you could put a switch after the modem and two wireless routers attached to the switch.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Mobile Me was my default email account, so if I did any emailing like trying to send a photo directly from iphoto it would send from the mobile me address. Is there a way to set a different default email account now that mobile me is gone?

We used Mobile Me for our default email. So if you answered an ad from a site or tried to send a photo directly from iphoto, it would use the mobile me account. Now that its gone, can I set a different address as my default?

WEll, MobileMe has been moved & still works in iCloud.
Did you setrup an iCloud account?
Do not delete the old account yet. sign up for an iCloud account if you haven't.
MAKE A NEW ACCOUNT - DO NOT TRY TO ALTER YOUR EXISTING ACCOUNT.
I understand .mac mail will still come through. Do not delete the old account yet.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
• Server name: imap.mail.me.com
• SSL Required: Yes
• Port: 993
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password
SMTP (outgoing mail server) information:
• Server name: smtp.mail.me.com
• SSL Required: Yes
• Port: 587
• SMTP Authentication Required: Yes
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to http://appleid.apple.com then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0

How to set a different default font

Similar Messages

Maybe you are looking for