How to set a different listener on port 465 for SMTPS?

The idea is being able to manage both plain and secure SMTP while reconfiguring all clients for SMTPS.
How would you go about this?
I have
- created new Ip interface + listener
- created SMTP authentication profile
- created a new policy that requires TLS / SMTP Authentication
I am unable to send mail and I don't receive clear messages as to why it isn't working.

AFAIK, ironport only support TLS (which is port 587) and if you try to enable 465 just to accomodate SSL (for those that using old broken MUA) it won't work.

Similar Messages

How do I set a Phase Listener to only run for a specific page?

How do I set a Phase Listener to only run for a specific page?
I understand that a Phase Listener runs for ever page in the application, however I want a phase listener to only run for one page at the beginning of the application.
I discovered I can't use a Filter, because the JSF Application instance always returns null.
Thus, I thought a Phase Listener would be a good approach.
Thoughts?
Thanks,
--Todd

I have moved forward with checking the requested URI...
(shivers)
Thanks,
--Todd

How to set up different ring tone for Facetime

how to set up different ring tone for Facetime

I don't think that on an iPhone that FaceTime has a separate setting, you can only set a ringtone (which will apply to phone calls) via Settings > Sounds, or set different tones for different contacts via the Contacts app - but you can't have a separate sound for FaceTime

How to set up a basic file sharing server for my small architectural business?

I have no idea if I have posted in the correct area as this is my first forum post within the apple support community!
I have been using a 21.5" imac running 10.6.8 for the past 5 years to run my small home based architectural design business. I have been using the internal hard drive & backing up the necessary data to a simple usb external hard drive. I am now looking to firstly purchase a new imac 27" retina and purchase new autocad lt 2015 for mac software. I am looking to have another imac (my old mac) running in conjunction with the new mac. I want both macs to be able to access the same data and am slightly unsure what is the best way to achieve this.....As my old mac is currently only running snow leopard and an old version of autocad for mac 2011 it wont run on any more recent OS. Essentially i believe I have 2 main options with this.... (1) I Accept that I have to purchase 2 no. autocad lt 2015 licences @ a cost of £2300. Or option (2), I only run autocad on the new mac as this will be the primary station and the old mac used for primarily for admin & accounts. I have also recently discovered that it is possible to rent autocad licences for £300p/a which may also be another option (3)!
I previously had a problem where my hard drive failed on my mac & lost all data on the internal hard drive, luckily I had been backing up all data regularly to my external hard drive and now loss occurred! Obviously with any new system I want to ensure that my data is safe!
I currently utilise about 250GB of data for business operations but this will obviously grow with time.
In the future I would like to have the option of potentially being able to access the network data remotely via macbook pro whilst abroad although at this stage this really isnt my primary objective. Although I believe I could achieve this through apple remote desktop.
I suppose I should provide some information with regard to the required speed of the system...I regularly open 50-100 photos at the same time totalling around 250-500MB. I would like the system to be able to handle this fairly easily.
I have been trawling through forums and to be honest they are totally confusing me. I have also spent time on the phone to the apple business team and have also discussed my objectives with a member of the apple team in store.
There have been various options advised to me and I really do not know which is the most appropriate route forward.
1 - Using a mac mini as the file server and linking the 2 mac devices to this and backing up the mac mini to an external hard drive to ensure no loss of data.
2 - Using a time capsule as a file server and linking the 2 mac devices to this and backing up the TC to an external hard drive to ensure no loss of data.
3 - Using the new mac hard drive and linking the 2 macs via thunderbolt (old mac does not have thunderbolt and so I guess I would need another new mac?!) and then backing up the data to a time capsule.
4 - Using a RAID based server and linking the 2 no. macs.
Sorry to ramble but any advice really would be greatly received!

Hi sblemings,
Welcome to the community.
I think with your scenario you should ask yourself, how complicated do you want the setup to be and how much time would you have to be able to resolve an issue should one occur with this setup.
All the options that have been advised would work but they come with complexity and therefore time.
1 - Using a mac mini as the file server and linking the 2 mac devices to this and backing up the mac mini to an external hard drive to ensure no loss of data.
2 - Using a time capsule as a file server and linking the 2 mac devices to this and backing up the TC to an external hard drive to ensure no loss of data.
3 - Using the new mac hard drive and linking the 2 macs via thunderbolt (old mac does not have thunderbolt and so I guess I would need another new mac?!) and then backing up the data to a time capsule.
4 - Using a RAID based server and linking the 2 no. macs.
Sorry to ramble but any advice really would be greatly received!
option 1
Would be a way to achieve what you want, it would centralise your files and you would only need to backup your file server (as long as all the files you wanted backed up were on it). This could be achieved either using the client and sharing various folders or using Server which would give you more options than you would possibly need.
option 2
This is exactly like option 1 except that you wouldn't have to administer another mac however you may limit any future growth.
option 3
This option I probably wouldn't pick, you could achieve this with firewire and use a firewire to thunderbolt adapter (saves you having to buy a new iMac)
option 4
This option would, depending on your RAID level, give you disk redundancy but remember you would still need to back this up, as RAID is NOT a backup solution.
I would also ask is there a pressing need to keep the old iMac in service and complicating things by having a server / NAS? Could you not just transfer all your information over to this and continue with the one backup? I would say that doing it this was would be the simplest way of achieving what you want from what I can take from your question.
As for remotely accessing your data, if you have the right hardware the way to achieve this would be to use a VPN and connect back to your data. However a potentially easier way for you ,would be to use a service like logmein or teamviewer to connect back.
Hope this helps, and by all means any questions please ask.
Dan
How to set up a basic file sharing server for my small architectural business?

How to set up Airport Express in Bridge mode for hotel use

Please provide step by step instructions on how to set up Airport Express in Bridge mode for hotel use. I do not have a computer with me, only an iPhone and AEX 802.11n.

+"Please provide step by step instructions on how to set up Airport Express in Bridge mode for hotel use. I do not have a computer with me, only an iPhone and AEX 802.11n."+
AirPort Utility is the application that must be used to setup and make any configuration changes to the AirPort Express. I'm not aware of an "App" for this.
If you could borrow a computer from someone there for 30 minutes or maybe use the computer in the lobby, you could download AirPort Utility and reconfigure your Express. To help with setup, use an ethernet cable from the computer to the Express to help AirPort Utility "see" the Express.
http://support.apple.com/downloads/#airport

How to set JDBC Data Sources in Oracle MapViewer for Oracle database 12c Release 1 (12.1.0.1)

How to set JDBC Data Sources in Oracle MapViewer for Oracle database 12c Release 1 (12.1.0.1)?
The following is my configuration in the conf\mapViewerConfig.xml:
<map_data_source name="mvdemo12"
jdbc_host="127.0.0.1"
jdbc_sid="orcl12c1"
jdbc_port="1522"
jdbc_user="mvdemo"
jdbc_password="7OVl2rJ+hOYxG5T3vKJQb+hW4NPgy9EN"
jdbc_mode="thin"
number_of_mappers="3"
allow_jdbc_theme_based_foi="true"
editable="true"/>

But it does not work.
After use "sqlplus mvdemo/[email protected]:1522/pdborcl", it connected to the Oracle database 12c.
Does anyone know it?
Thanks,

For 11.1.1.7.1 use the syntax for jdbc_sid, i.e.
//mypdb1.foo.com as described in the README,
- MapViewer native (non-container) data sources can now use database service name in place of SID. To supply a db service name, you will use the same jdbc_sid attribute, but specify the service name with double slashes in front, such as follows:
<map_data_source name="myds"
    jdbc_host="foo.com"
    jdbc_sid="//mypdb1.foo.com"
    jdbc_port="1522"
/>
For 11.1.1.7.0 use a container_ds instead.
i.e. instead of using
<map_data_source name="my_12c_test"
                   jdbc_host="mydbinstance"
                   jdbc_sid="pdborcl12c"
                   jdbc_port="1522"
                   jdbc_user="mytestuser"
                   jdbc_password="m2E7T48U3LfRjKwR0YFETQcjNb4gCMLG8/X0KWjO00Q="
                   jdbc_mode="thin"
                   number_of_mappers="6"
                   allow_jdbc_theme_based_foi="false"
                   editable="false"
   />
use
<map_data_source name="my_12c_test"
                   container_ds="jdbc/db12c"
                   number_of_mappers="6"
                   allow_jdbc_theme_based_foi="false"
                   editable="false"
   />
In my case the Glassfish 3.1.2.2 JDBC connection pool definition was
Property
url jdbc:oracle:thin:@mydbinstance:1522/pdborcl12c.rest_of.service.name
Uncheck the Wrap JDBC Objects option in Advanced panel, i.e. the Edit JDBC Connection Pool Advanced properties page.
Add a JDBC resource for that newly created pool
Use that in mapviewerconfig.xml as above

Possible to have two tiers listening on port 80 for OAS 10g? -- help

I would like to have multiple tiers listening on port 80 for my application server. Is this possible?

2 daemons, both listening on the same port on the same server.... It is not possible, unless:
1. you have two middle tiers on 1 machine
2. both middle tiers having the same applications installed
3. using webcache as loadbalancer
In any other case: it is just not possible, because the tcp packet knocking at port 80 just doens't know which daemon to choose...

How can i set up different libraries on one PC for myself, daughter, and wife if we all have our own accounts?

I currently have a wife and daughter that use ipods and I just bought an iphone. Is it possible to have three seperate music libraries on one PC if we all have seperate itunes accounts? and if so how do I accomplish this? I tried setting up different user accounts but the same single library keeps coming up. Thank you in advance for any help that you can provide.

how to share music between different accounts on a single computer
How to use multiple iPods, iPads, or iPhones with one computer

How to set up different virtual LANs (using the E3200)?

Hi.
I would like to set up different virtual LANs (using the E3200) so that I can have two different networks that can't access each other.
The E3200 is connected to a modem for internet access.
I would like both networks to have access to the internet.
Does the E3200 alone support creating virtual LANs?
If not, is there another way I can meet the requirement using the E3200 alone (using something other than virtual LANs)?
I'm ultimately thinking that I would need at least one other router.
So for example,
Router A (E3200) is connected to the modem and setup for DHCP using a LAN IP range 192.168.1.1/24.
Router B is connected to Router A and setup for DHCP using a LAN IP range 192.168.2.1/24.
In this way devices connected to Router A should not have access to devices connected to Router B and visa-versa, correct? For example, Device X connected to Router A cannot ping or browse files on Device Y connected to Router B and visa-versa, correct?
Would I need to setup anything else on Router B? For example, do I need to setup DNS settings so that devices connected to Router B can connect to the internet without issue? Would I need to specify that these virtual LANs are not bridged, and on which router, or both?
I already know how to set up a static IP, DHCP, LAN IP ranges, and static DNS settings on a router, etc.
In regards to wireless devices, I am thinking they would follow the same pattern; so wireless devices connected to Router A (E3200) have access to other wired and wireless devices connected to Router A but not to wired or wireless devices connected to Router B and visa-versa. However, if wireless devices currently don't have access to wired devices also connected to Router A, then that is fine for now.
Thank you very much!
-Rami
Solved!
Go to Solution.

The E3200 has no VLAN support according to the manual. There's no way to configure two separate networks with this router alone.
You will need to add network electronics.
Ex:
Managed Switch with VLAN
Another wireless router with VLAN
If your modem supplies multiple public or private IP addresses then you could put a switch after the modem and two wireless routers attached to the switch.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Simple question: How to set a different image to each side of a 3D cube?

Hi all,
I'm very new in the use of Java 3D and I would like to know how to set, in a 3D cube, for each side a different image.
Currently I've the code to set an image as texture of the cube, but it applies the same image to all the sides. However, I would like to use different images for each side.
This is my code: http://pastebin.com/sexBx57K
Any clue?
Thanks!

I think I worked it out.
I just have to set the JAXP parser
Q. How do I use a different JAXP compatible implementation?
The JAXP 1.1 API allows applications to plug in different JAXP compatible implementations of parsers or XSLT processors. For example, when an application wants to create a new JAXP DocumentBuilderFactory instance, it calls the staic method DocumentBuilderFactory.newInstance(). This causes a search for the name of a concrete subclass of DocumentBuilderFactory using the following order:
1. The value of a system property like javax.xml.parsers.DocumentBuilderFactory if it exists and is accessible.
2. The contents of the file $JAVA_HOME/jre/lib/jaxp.properties if it exists.
3. The Jar Service Provider discovery mechanism specified in the Jar File Specification. A jar file can have a resource (i.e. an embedded file) such as META-INF/services/javax.xml.parsers.DocumentBuilderFactory containing the name of the concrete class to instantiate.
4. The fallback platform default implementation.

How to set two different welcome-file to different servlets in web.xml

Hi friends,
Can some one help with web.xml file
I have to different servlets in applications.
I want to set two different welcome files for my two different
servlets in web.xml
Please, can some one give me sample code to achieve this.
Here web.xml code:
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app PUBLIC
"-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
     <servlet>
          <servlet-name>reports</servlet-name>
          <servlet-class>com.caremark.ivr.servlet.IvrReportsServlet</servlet-class>
     </servlet>
     <servlet-mapping>
          <servlet-name>reports</servlet-name>
          <url-pattern>/reports</url-pattern>
     </servlet-mapping>
     <session-config>
          <session-timeout>30</session-timeout>
     </session-config>
     <welcome-file-list>
          <welcome-file>reportsindex.jsp</welcome-file>
     </welcome-file-list>
     <servlet>
          <servlet-name>calldetails</servlet-name>
          <servlet-class>com.caremark.ivr.servlet.IvrCallDetailsServlet</servlet-class>
     </servlet>
     <servlet-mapping>
          <servlet-name>calldetails</servlet-name>
          <url-pattern>/calldetails</url-pattern>
     </servlet-mapping>
<welcome-file-list>
          <welcome-file>calldetailsindex.jsp</welcome-file>
     </welcome-file-list>
</web-app>
I need this fix immediately. Your help will be really appreciated. Thanks in advance.

First of all, my understanding is that you need to have a Servlet 2.4 complaint server to do this...Given that, you're supposed to be able to simply specify the Name of the servlet as the welcome-file to get it to work. For example:
Your servlet section:
<servlet>
<servlet-name>Controller</servlet-name>
<servlet-class>com.company.ControllerServlet</servlet-class>
</servlet>Now you would add the following to your welcome file list:
<welcome-file-list>
<welcome-file>Controller</welcome-file>
</welcome-file-list>Note that you use the servlet-name value from the servlet definition, NOT the url-mapping from the servlet-mapping section.
Please note that I cannot verify this as I am running a 2.3 server at home. When I get to work Friday I can test on a 2.4 machine. However this shouldn't take you more than a minute to test.
Note that I did try this on the 2.3 compliant server and it did NOT work (as I expected)...
HTH.

How to set a different default font

Is there a way to set a different font other that Myriad Pro as the default font so that you don't have to continually reset it for every field or label???

During import, Designer attempts to match fonts in the PDF file with fonts that are available on your computer. If the file contains an unavailable font, Designer displays a dialog box showing the missing font and a suggested replacement. You can accept the replacement font or change it.
This font substitution is not permanent. Designer must map the unavailable fonts every time the form opens. You can make the font substitution permanent by selecting File > Save As and then selecting Permanently Replace Unavailable Fonts before saving the file. This method is recommended for permanently substituting fonts.
You can also set up a font-substitution table in the file ConvertPDF_FontMap.txt in the Designer installation directory. If you add a font-substitution rule to this file, all occurrences of the substituted font are changed to the new font when you import a PDF, regardless of the font-mapping table and regardless of whether the substituted font is available on your computer.
ConvertPDF_FontMap.txt is empty by default. Each entry you add should have the following syntax:
input_font=Designer_font
where input_font is the name of the font used in the input PDF file, and Designer_font is the name of the font that is installed on your computer. Asterisks (*) represent wildcard characters. For example, the string *Cour* refers to all font names that contain the string Cour. Question marks (?) represent single-character wildcards. Adding wildcard characters before and after the input_font name accounts for any slight variations in the name of the font in the form. For example
*Arial*=Arial
*Helv*=Arial
*Cour*=Courier New
*=Times New Roman
Processing occurs in descending order. The last line in the example converts all remaining fonts to Times New Roman.

How to set up same timezone in BI Publisher for all the USERS?

Hi Experts,
My OBIEE version is 11.1.1.6.6 and any user can go into the My Account and then preferences and set the timezone.
But as an admin, i see they are too many users and wanted to setup common timezone for all of them.
How do i setup common timezone in BI Publisher for all the users?
Thanks
Ashish

Check
Time Zone Specification from http://docs.oracle.com/cd/E12844_01/doc/bip.1013/e12187/T421739T481157.htm#4535403
just in case https://blogs.oracle.com/xmlpublisher/entry/how_to_keep_your_dates_from_go

How to set storage location in Nokia lumia 820 for...

Hi,
I would like to know if and how to define the storage location in my Nokia lumia 820.
I have recently purchased a micro SD card by Kingston and would like to download and install apps, like games who require more storage then my Nokia 820 supports(8GB).
I saw that the only available option set is to choose the the storage for music + videos and pictures from settings/phone storage but no option set could be found for the apps or others.
Please help me with some guidelines or with a proper workaround as I tried unsuccessfully to find the understanding for this in various resources.
Thank you for considering my request.
Vlad Zaicescu
Solved!
Go to Solution.

You can't install applications, Games on the SD Card. Only other thing that you may save on the SD Card is the Maps ..but you need THIS application. Need to log-in using the same credentials that you use on this forum to download it ...

How to set one default "reply-to" email address for multiple accounts

I have an iPhone 3GS. I have my own domain name which I want to use as my primary "public" email address. It is forwarded from the hosting ISP to my ATT/Yahoo email address. I also have a Gmail account. I would like recipients to see that it comes from my domain ([email protected]), but since it is actually going through ATT/Yahoo, I can only see how to set the "From" field to either my ATT/Yahoo account or my Gmail account addresses. Is this even possible?
Essentially, I don't directly access "[email protected]", but that's where I want it to appear to come from, regardless of where it actually originated.
Any ideas?
Thanks,
Mark

You get e-mails just fine, but do you have rights to log into the e-mail server at myfirstandlastname.com? If you can do that (check with your hosting ISP to find out if they will let you), then you can just set up the iPhone to use that e-mail server to send your mail. It's possible to set up an iPhone IMAP account to get mail from gmail, but use a separate non-gmail SMTP server to send outgoing mail, all within the same iPhone e-mail account.
If you can get this working, then you won't need to mess with reply-to headers. Your e-mail will not only look like it got sent from myfirstandlastname.com -- it actually WILL be sent from there and all replies will automatically go there and then be forwarded as usual to your ATT/Yahoo address. No one will know that ATT/Yahoo is involved, and both your sent and received e-mail will show up in the same single e-mail account on the iPhone.
I do this all the time with my e-mail. My account is really at gmail, but the e-mail address says it came from mycollege.edu. My old college offers me an alumni forwarding-for-life account. They only forward mail, though; they don't hold it. They do also run an SMTP server, though, and that's what I use to make my outgoing e-mail look as if it came from mycollege.edu.

How to set a different listener on port 465 for SMTPS?

Similar Messages

Maybe you are looking for