How to set a different UoM for a customer
Dear Gurus,
In my material master the Unit of Measure for weight is KG. I have 1 customer who needs to have the gross and net weight in pounds, how can I set this value so I avoid to change it during SO creation?.
Best Regards
-Italo
Hi
you can maintain sales unit of measure as pounds and maintian relative conversion in material master data.
and while doing transactions for customer you can use the sales unit that will give u the result.
Regards
Mandar
Similar Messages
-
How to set a default date for a custom field of Date type in project server 2010.
hi,
can somebody help me.
How Can i set the default date for a custom field of date type in project server 2010 ?Dear Rohan,
You can set default value to custom field thru Lookup table. Assign lookup table to custom field and set default value to some lookup value (Note: check the “Choose a value to use as a default when adding new item” checkbox).
Regards,
Avinash kumar | Blog:http://avigr8.wordpress.com | If you found this post helpful, please “Vote as Helpful”. If it answered your question, please “Mark as Answer”. -
How to set up different realms for each server ?
I am using weblogic 6 sp1.I have a domain with several servers. i want to assoicate or use different custom security realm for each server.However -on weblogic console- there is no 'Target' tab in the Security node ,and no way to set up multiple Security nodes.How ca i do this (or can i)?
Main reason why is this:
Imagine situation I have 2 servers A and B both of them bellongs to domain SomeDomain.
Server A is as WebServer and server B hosts all EJBs. And server A is outside
firewall (does not have DB access). But i would like to use RDBMS realm so what
to do in this situation. Place both servers in different domains and in server
A install proxy realm for RDBS realm ?
"Tom Moreau" <[email protected]> wrote:
>
You can't have a different realm for each
server. There is only one realm for all
servers - think of it as there is only
one set of authentication & authorization
information (that is users/groups/permissions)
and it applies to all servers.
Why do you want each server to have its
own realm? If someone tries to log in,
do you want WLS to automatically route
them to a server who is capable of logging
them in? I'm having trouble understanding
why you want this feature.
Thanks,
-Tom Moreau
Rachel <[email protected]> wrote:
I am using weblogic 6 sp1.I have a domain with several servers. i want
to assoicate or use different custom security realm for each server.However
-on weblogic console- there is no 'Target' tab in the Security node
,and no way to set up multiple Security nodes.How ca i do this (or can
i)? -
How to set a different parser for JAXB ?
from the FAQ https://jaxb.dev.java.net/faq/index.html
A question about which jars are required says
"The runtime also needs a JAXP-compliant parser. If your target environment is
JRE 1.4 or higher , it is a part of JRE, so you don't need any more jar file.
Otherwise you have to bundle a parser, too. Any parser would do the job, but we
recommend the JAXP RI bundled in the JWSDP (which is what we test against.) "
I am running jdk1.3 and want to use a different parser how do I specify it.
Thanks
SteveI think I worked it out.
I just have to set the JAXP parser
Q. How do I use a different JAXP compatible implementation?
The JAXP 1.1 API allows applications to plug in different JAXP compatible implementations of parsers or XSLT processors. For example, when an application wants to create a new JAXP DocumentBuilderFactory instance, it calls the staic method DocumentBuilderFactory.newInstance(). This causes a search for the name of a concrete subclass of DocumentBuilderFactory using the following order:
1. The value of a system property like javax.xml.parsers.DocumentBuilderFactory if it exists and is accessible.
2. The contents of the file $JAVA_HOME/jre/lib/jaxp.properties if it exists.
3. The Jar Service Provider discovery mechanism specified in the Jar File Specification. A jar file can have a resource (i.e. an embedded file) such as META-INF/services/javax.xml.parsers.DocumentBuilderFactory containing the name of the concrete class to instantiate.
4. The fallback platform default implementation. -
How to set a different PLD for checks payment vs. outgoing payments?
Hi Experts,
Is there a way to configure B1 to use one PLD for checks that originate from the 'Checks for Payment' window/process and another for checks that originate from the 'Outgoing Payments' window/process? I see in our current configuration that they are sharing the same PLD and I would like to change that.
Thanks!Hi Lang,
If they are issued from the same bank, then it would be the same cheque stock that is used for printing which is why they use the same PLD template. Whether the payment is created through Outgoing Payments, Checks for Payment or Payment Wizard, the end result uses the same template if the same bank is used.
If it's issued from different banks, you would select the applicable bank and could have different templates. In this case, the PLD template would be determined under Setup / House Bank Accounts.
Hope that helps,
Heather -
How to set up different ring tone for Facetime
how to set up different ring tone for Facetime
I don't think that on an iPhone that FaceTime has a separate setting, you can only set a ringtone (which will apply to phone calls) via Settings > Sounds, or set different tones for different contacts via the Contacts app - but you can't have a separate sound for FaceTime
-
How to set up Airport Extreme for 11ac and 11n?
I have just purchased the new Airport Extreme (August 2014) because Apple's website states
Simultaneous dual-band support.
AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
I have number of Macs in my home from a new MacBook Pro with Mavericks to a Macbook Air with Snow Leopard (due to required software) and iPads.
So after setting up the new Extreme my new MacBook only accesses 11n as does my older Macs. I checked by holding down the option key while clicking the WiFi icon at the top of my Mac. Well, not so automatic then as I was expecting 11ac and 3 times faster access (as stated by Apple).
I then looked for some documentation for setting up but cannot find anything.
Hence my question here.
How to set up Airport Extreme for 11ac and 11n simultaneously?
At present the new Extreme is no better than my previous 2 year old one.
Thank you.
MichaelHow to set up Airport Extreme for 11ac and 11n simultaneously?
Assuming that it is operating correctly, 802.11ac and 802.11b/g/n are broadcast simultaneously by default.
Simultaneous dual-band support.
AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
That is advertising. The real information is usually found in the small and hard to read footnotes:
Based on theoretical peak speeds. Actual speeds will be lower.
AirPort Extreme is based on an IEEE 802.11ac draft specification. Performance based on comparison with Apple’s 802.11n products. Comparison assumes AirPort Extreme network with 802.11ac-enabled computer. Speed and range will be less if an 802.11a/b/g product joins the network. Accessing the wireless network requires a Wi‑Fi-enabled device. Actual speed will vary based on range, connection rate, site conditions, size of network, and other factors. Range will vary with site conditions.
Since the 802.11ac signal is being broadcast only using the 5 GHz band, some users report that they have had better results by using the option to assign a different name to the 5 GHz band, and then pointing their Mac to that specific signal or network. You may want to try that option.
But first as a test, please locate the MacBook Pro about 10-15 feet or 3-4 meters from the AirPort Extreme with clear line-of-sight between the two devices. Restart both the AirPort Extreme and the Macbook Pro and then check to see if the Mac is connected to an 802.11ac signal.
If not, please power off your other wireless devices...computers, mobile devices, etc. temporarily, and try the same test again.
Please report on your results. -
How to set a fixed width for a box
Hi there,
Struggling here.... must admit.
I need a solution whereby I can set a fixed width for a box that is grouping two buttons. I suppose generally, I want to know how to set a fixed width for anything element.
See the picture below. I want the two buttons to stay the same distance apart, and I want the grouped buttons to stay the same distance from the right edge of the window, even as a user resizes the window.
This is what happens when you reduce the size of the window .....
I would like to stop this from happening.
I can't figure out how accomplish keeping the parent div a fixed width, and a fixed position from the right side of the window, so the buttons won't overlap.
Perhaps I'm doing the whole thing wrong.
I mean, is there a way to accomplish this without grouping the buttons? That is, make the buttons fixed width, fixed distance apart from each other, and fixed distance from the right side of the window, even as the user resizes the page?
I am trying to accomplish this using the Min/Max width settings, but given that there are so many different units to choose from, and the fact that when I place a button or box on the screen, it seems to be creating that button or box with a percentage-based width, I don't know how many pixels to set it to.... sigh....
Many thanks in advance for your help.
SamOkay after much futzing I figured out at least part of the solution I need, but if someone knows of a more efficent way to do this please let me know.
I set a fixed minimum width in pixels for both of the buttons at 156px.
I then made the left button float left and the right button float right.
I then made the parent div for the buttons float right.
That made the buttons stay the same size.
The only thing I need to figure out how to do now is make the parent div stay a consistent distance in pixels from the right. I tried setting a right margin but that didn't work. As you size the window down, the div gets closer to the edge, until it passes it. -
SRM 4.0- How to set the default values for product type (01) only for SC
The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF -
How to set up automatic payment for the purchase order
Hi, All,
I have one question how to set up automatically payment for the Rent Office purchase Order?
There is the requirement from the client. They want to create one kind of purchase order for the Office Rent, then pay the fees in the certain time of every month to the vendor for the rent fees without any invoice. Whatu2019s the normal solution for this kind of purchase order? Is it ERS? Or something else?
Please give me the details and business flow. Also please tell me how to setup in the SAP and T-code.
Thanks in advanceEither you can set up ERS or you can pay directly from the FI side.
Prerequisites
Evaluated receipt settlement must be flagged in the purchase order item.
The vendor must be flagged as being subject to ERS in the vendor master record.
The goods receipt must refer to a purchase order.
Goods-receipt-based Invoice Verification must be defined for the purchase order item.
A tax code must have been maintained in the purchase order item.
The order price of the materials may not be an estimated price.
If you flag a vendor as being subject to ERS, the system sets the ERS indicator as a default in each item when you create a purchase order for the vendor. You can prevent this happening for certain vendors by flagging the info record for the material and the vendor as not being subject to ERS.
In Purchasing, you can delete the default ERS indicator in a purchase order item.
Choose Logistics Invoice Verification ® Automatic Settlement ® Evaluated Receipt Settlement (ERS).
The selection screen appears.
You can use the following criteria to narrow down selection of the transactions to be settled:
Company code
Plant
Goods receipt posting date
Goods receipt document
Fiscal year of the goods receipt
Vendor
Purchase order and order item
You can define the selection criteria for the invoice documents by:
Delivery
Purchase order
Purchase order item
Goods receipt document
Credit memo
Invoice
Currency
Choose Execute.
The system issues a log for Evaluated Receipt Settlement, which displays the following:
Settled
In line with your selection criteria, the system displays all the order items that were settled (or if you are working in test mode, which would have been settled).
Could not be settled
In line with your selection criteria, the system displays all order items for which ERS is defined but could not be settled. It also lists the reasons.
If the system reports being unable to invoice a transaction, you should exclude the transaction from ERS to avoid it being included in the log the next time ERS is run.
Select the item and choose Exclude from ERS.
The system also generates and possibly sends a message to inform the vendor(s) about the transaction settled, depending on the settings in Customizing.
You can display the following environment information for the order items selected. To do this, choose Goto ®:
Display purchase order
Display invoice
Display material document
Display long text -
How to use the different class for each screen as well as function.
Hi Experts,
How to use the different class for each screen as well as function.
With BestRegards,
M.Thippa Reddy.Hi ThippaReddy,
see this sample code
Public Class ClsMenInBlack
#Region "Declarations"
'Class objects
'UI and Di objects
Dim objForm As SAPbouiCOM.Form
'Variables
Dim strQuery As String
#End Region
#Region "Methods"
Private Function GeRate() As Double
Return Double
End Function
#End Region
Public Sub SBO_Appln_MenuEvent(ByRef pVal As SAPbouiCOM.MenuEvent, ByRef BubbleEvent As Boolean)
If pVal.BeforeAction = True Then
If pVal.MenuUID = "ENV_Menu_MIB" Then
End If
Else ' Before Action False
End If
End Sub
#End Region
End Class
End Class
Rgds
Micheal
Vasu Anna Regional Feeling a???? Just Kidding
Edited by: micheal willis on Jul 27, 2009 5:49 PM
Edited by: micheal willis on Jul 27, 2009 5:50 PM -
How to set-up a Timestamp for BI Delta Load in 0CLM_INVOICE datasrc at R/3?
Hi Experts,
Kindly let me know How to set-up a Timestamp for BI delta load at R/3 for the Data source 0CLM_INVOICE ?
Since the Timestamp for Upload of BI Delta is " . . : : ", we are not getting any delta value to BW.
I would like to know in where we need to maintain the DATE & TIME to fix the above problem.
Thanks.
Regards,
Jayaprakash JDear Jayprakash,
Chech the below links, it may help you in your case :
Re: 0FI_AA_11 Delta load failure
http://wiki.sdn.sap.com/wiki/display/BI/GeneralErrorIn+BI
Actaully you need not have to maintain the timestamp. Just try to replicate your datasource and the try to load the delta again.
Hopefully it will work.
Regards,
Rahul
Edited by: Rahul on Dec 10, 2010 10:23 AM -
How to set a default value for particular field in SRM PO Portal
Dear Gurus,
Im desparetly need a help in web dynpro on how to set a default value for a field(flag) in PO header tab in portal.
My requirement is whenever the user press the edit button in PO screen,automatically a flag field should be set as abap_false.
I dont think this will handle in check badi or change badi. i tried this part in onbuttonpressed overwriteexit in CNR_VIEW views,i can get the function EDIT in debugging mode,but dont know how to proceed further.....
Many of them suggested to go with get attribute and set attribute for changing any particular field in web dynpro,but im not very familiar in using those get and set attributes.I request you people can give me sample code on how to identify my target field in the node and set the values while pressing EDIT Button.
Thanks in advance...
Regards,
SathishDear Laurent,
Thanks for your response,
But i searched in enhancement spot of WD_BADI, but couldnt get the exact way to change the coding,
My real requirement is, that particular flag should be enable and disable dynamically by checking a condition in my header values.So in that case i dont know how to proceed further to handle in the PO screen.
Kinly guide me how to get the particular node of field in the Purchase order screen.
Thanks you in advance,
Sorry for the inconvenience if any
Regards,
sathish -
How to set a new value for formula field in crystal reports xi?
<p>How to set a new value for formula field in crystal reports xi?</p><p>//formula</p><p>{@description}</p><p> </p><p>exemplo in VB6</p><p>crxSubreport.FormulaFields.Item(1).Text = "'Subreport Formula'" or</p><p>crxSubreport.FormulaFields.Item("description").Text = "'Subreport Formula'"</p><p>How to in JRC?</p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p>
Hi,
This functionality is known to be very important and is a key part of the next major release of the JRC planned for the first half of 2008.
Regards,
<p>Blair Wheadon</p>
<p>Product Manager, Crystal Reports</p> -
"I would like to know how to set the default view for the columns that are shown in iTunes. Every time I open it, I have to either go to the options, or right-click to get the pop-up options, and delete "rating" and add "composer." I'd really like to just do it once and be done with it." Somewhere I read you could do this by clicking on the Music icon under LIBRARY then arramge the columns. Trouble is, I can't find a Musi Folder or icon in my user library.
Any help would be appreiated. OSX 10.9.2 iTunes version 11.1.5 Thanks!!! CW!From the iTunes menu bar try View>Show View Options. Make sure what you want to see is checked and what you don't is unchecked. You can do this (may need to do this) for any playlists, your main Library, etc.
Good luck
srb
Maybe you are looking for
-
How to find the ascii value in abap
Hi everyone, i want to get to ascii value of a given character. so wanted to know whether is it possbile to get ascii value of a character in ABAP or not ? if yes let us know the way to find it ... thank you.
-
Making a .app in C++
I'm a fairly experienced C++ programmer, and have been using gcc in the terminal to compile programs in OSX. I'm trying to build a program to offer online as a download, but the problem is when you transfer the program to another program the permissi
-
Thank you for reading the above question as it is, plus: I lost my Thunderbird computer internal email feature & was new & did not know how to put Yahoo or other into that function. I signed up for Mozilla Firefox for my Toshiba PC laptop, really lik
-
PEAP-MSCHAPv2 & MAC-AUTH with WEP on same AP
Hi, is it possible to have PEAP-MSCHAPv2 authentication and MAC Authentication against Central Cisco ACS, on the same Access Point on different SSID's without conflicting with each other? Thanks Jorge
-
What's the new interface like?
I've read this about Logic going to a single-window interface, and I'm skeptical. How does this work out? Do we still have screensets? Can I still hit a trusty old Cmd-# combination to open a Matrix or Environment window? Is there a "Classic" interfa