How to set a dynamic email destinator ...

Hi.
I've completed my mail scenario, adding an attachment as a CVS file.
Now i have two doubts. In my payload i have two fields. FILE and EMAIL.
I would like to use the email as the receiver of the email (message protocol : XIALL) and the FILE as the name of the attachment FILE.
I've done something similar but with file adapter, using 'Variable Substitution' but in Receiver mail adapter i haven't this option.
Any idea of how to do that?
Regards.

Hi ,
In the file adapter you can give the inputs for mail adapter destination . But if you want to give it dynamically check out the URL.
End of the doc.
http://help.sap.com/saphelp_nw04/helpdata/en/6b/4493404f673028e10000000a1550b0/content.htm
Regards
Vijaya

Similar Messages

  • How to set up Dynamic Variants for job which is based on Pay Period

    Hi,
    We need to set up dynamic variant for payroll interface.  This interface is based on Pay periods and that is why we need to use different variant for each month.  Letus know how to set up dynamic variant which will take care of Pay Periods

    Hi,  Thnx for reply.
    We are not changing the control records, current period will be some old period in system. 
    payroll is not processed in SAP,

  • HOW TO SET-UP AN EMAIL ON N81-3 (N81)Anyone can gu...

    Hi to all..
    Anyone can guide me how to set-up an email for N81?
    Should I have an Yahoo Plus email account?
    I'm really appriciated to all members to guide me on this.

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • How to set up an email account on iPad3 -

    a question on how to set up an email account on iPad3 - In Settings - Mail - it allows me to choose a name and submit but then it says "can't open mail, try later". I use my apple iD  to open iCloud.com on my computer, but can't access mail from there either.

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • HT5312 How to set a rescue email address when I already have an Apple ID and I forgot my security questions

    How to set a rescue email address when I already have an Apple ID. Actually I forgot my security questions.

    You won't be able to add one until you can answer your questions, you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

  • How to set a dynamic textfield?

    How to set a dynamic textfield that can baseon the user input data to resize the textfield height and width? Beside, I would like to copy the MS word table into the Form textfeild with the original design, how to do that? Many thanks!

    You need to check two things:
    1- Make sure to check the "Allow Multiple Lines" under the object tab.
    2- Check the Expand to Fit checkboxes under the layout tab.
    Jasmin

  • How to set password on email body in custom Email Template

    Hy,
    I have a Email Template customized in Email Definition>Design Console.
    I need send this 'Email Template' with the password user, but I don't know how to set the variable 'password' in the body of email.
    I searched in Varables>Targets>Variables, but I not found any think variable like password.
    Some has a idea about this? How to set password on email body?
    Regards,
    Piza

    You can use custom Java code. Refer the following:
    Email notification to users after they change their OIM password

  • How to set up multiple email accounts?

    I need to set up additional email accounts on my iphone and can't figure out how to do that.  I set up an AOL account but want to add one from my personal website.  All it show is my AOL account and doesn't give me an option to add another email address.

    Go to settings, go to mail, then add account

  • How to set up an email account on one only one machine

    I need to be able to set up an email account on only one machine. I know I can disable the account on other machines, but that's not what I want. I don't want the email account to appear in the account list on my other machines, even if it is disabled. I don't want my other machines to know about the account at all.
    How do I set up my accounts so that the email account shows up on only one machine?

    Perhaps some pictures would help explain.
    If in Mail I right click the account I get this window.
    I want to remove the account "B" from this computer. I select it and click "-" and am taken to "Internet Accounts" in "Settings"
    There I see this.
    If I now click "-", I get the following choices.
    Now, I don't want "Remove From All", as I would like to keep the account on my other computer. So I click "Turn Off Account" which results in this
    The account is inactive, but is still in the list of accounts. I want to remove it from the list of accounts (without removing it from the other computer.)
    How do I do that?

  • How to set default "from" email in Launchpad

    Where do you set up the default from email address in BI Launchpad so that when scheduling reports so that this does not have to be filled in everytime?  Additionally, we would want this to be read-only so that it cannot be changed.
    We are using Crystal Server 2011:

    Log in to the CMC and go to Servers.  Go the the Destination properties of each "Job Server".  Select the "Email" destination and you can set the default "From" address there that should apply to all schedules.
    -Dell

  • HT5312 how or where do i go to to find out how to set a rescue email so i can reset my security questions

    i forgot the answers to my security questions for my itunes account on my computer and now i can buy anything
    can somone just tell me how to do the rescue email I read the thing that itunes sent to my but does not tell you how to to set a rescue email can anyone help!

    Go back to the article you asked this question from and use the link to contact the iTunes Store staff in the 'Additional Information' section. If you don't already have a valid rescue email address, you can't reset the questions yourself, and nobody on these boards can reset them for you.
    Setting up a rescue email address requires correctly answering two of the questions.
    (91126)

  • HT5312 I dont know how to set a rescue email!!!!!

    Who could tell me how to set a rescue email

    There are instructions on the page that you posted from :
    Navigate to appleid.apple.com using your web browser.
    Click "Manage your account"
    When prompted, sign in using your Apple ID and password.
    Click Password & Security
    You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
    After you've validated your identity by correctly answering your security questions, click Edit to the right of your rescue email address.
    Once you've finished editing your rescue email address, click the Save button directly below the email field.
    If you are asking because you've forgotten your security questions then you won't be able to add one until you've had the questions reset - in whic case see if the instructions on this user tip helps : https://discussions.apple.com/docs/DOC-4551

  • How to set a rescue email address without answering security questions?

    As it turns out i don't have any rescue email address and forgot my security questions! so how can I know what was my answers to those questions?! or how can I set a rescue email address when I couldn't go to the "password and security" section?

    You won't be able to add a rescue email address until you can answer your questions, you will have to contact Support in your country to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/en-us/HT5699
    If your country isn't on that page then try this form and explain and see what they reply with : https://ssl.apple.com/emea/support/itunes/contact.html
    When they've been reset you can then add a rescue email address for potential future use : http://support.apple.com/en-us/HT201356
    Or if it's available in your country you could change to 2-step verification : http://support.apple.com/kb/HT5570

  • How to set a new email account for iCloud?

    How set a new email account for iCloud?

    There are two separate things you can do.
    You can add up to three 'email aliases' - these are additional addresses (not accounts) which deliver into the same inbox as the main account. (In fact it's a good idea to give out alias addresses, rather than the main address, because if they attract spam you can easily change them.) (New aliases can only be @icloud.com ones; @me.com addresses cannot now be created.)
    You should be aware before you start that once you've created an alias you cannot turn that address into a full iCloud account or move it to another account, and if it has @mac.com or @me.com versions these cannot be reinstated once deleted.
    More information on aliases here: http://help.apple.com/icloud/#mm6b1a490a
    Or if you want a completely separate account you will have to create a new iCloud account and sign into it in System Preferences>Mail, Contacts and Calendars. Note that any one device can create only three iCloud accounts.

  • How to set a dynamic filter to a prompted one?

    Hello:
    I have a dashboard prompt whose values determine the columns for a constructed dynamic filter column using case statement.
    There is another dashboard prompt whose value determine the the values for the dynamic filter column.
    I have a need to set this dynamic filter to the operator 'is prompted'. According to the OBIEE documentation, the requirement for 'is prompted' filter is to have the dashboard prompt column match with the filter column.
    I currently use a presentation variable for the dashboard prompt column that gives the filter value.
    How do I make my dynamic filter to be prompted (for pre-filtering results as a default behavior) and subsequently use the presentation variable (derived from the dashboard prompt) if a user enters the appropriate prompt values?
    Here is an example:
    Dashboard prompt: Location Type-> (State, District, City) (The case statement on my filter determines the appropriate logical column State or District or City)
    Filter Value: Dallas (pv1)
    The dynamic filter will generate "City" = '@{pv1}' (Dallas in the above example)
    I want this dynamic filter to be set to 'is prompted' for pre-filtering results as a default behavior.
    Thanks for reading this far and looking forward to your suggestions.
    Regards
    Sankar Bala

    Please read this carefully, you may find what you are looking for:
    Dynamic dashboard prompts and columns used in multifunctional report, full guided navigation
    http://108obiee.blogspot.com/2009/08/dynamic-dashboard-prompts-and-columns.html
    Or this one:
    http://obiee101.blogspot.com/2009/04/obiee-dynamic-prompt-content.html
    Regards
    Goran
    http://108obiee.blogspot.com

Maybe you are looking for