How to set a few runlevels in /etc/inittab and GRUB?

Hello!
Is it possible to set two runlevels, which I can choose from GRUB? My GRUB:
# (0) Arch Linux
title Arch Linux Multi-user
root (hd0,2)
kernel /vmlinuz26 root=/dev/disk/by-uuid/e2792ad1-31b8-4621-abb0-9e934759722e ro 3
initrd /kernel26.img
# (1) Arch Linux
title Arch Linux X11
root (hd0,2)
kernel /vmlinuz26 root=/dev/disk/by-uuid/e2792ad1-31b8-4621-abb0-9e934759722e ro 5
initrd /kernel26.img
These settings don't work. Every time starts the runlevel, which is set to /etc/inittab.
## Only one of the following two lines can be uncommented!
# Boot to console
id:3:initdefault:
# Boot to X11
#id:5:initdefault:
SLIM is set as a deamon. May be this is the problem?

adding "init 3" or "init 5" should work
slim added as daemon is a problem. you should use inittab way if you want that to work.
Last edited by wonder (2009-10-17 11:07:03)

Similar Messages

How to set up internet connection between MacBook Pro and an old eMac?

I got an old eMac without wifi and a MacBook Pro. I'd like to share the network connection via ethernet cable to my eMac, but I can't get it work.
I'd like to use it with screenrecycler and it needs a network connection.
How to do it? How to set up the connection between the client and the host? Could somebedy give me a step by step guide?
Thank you very much

Hello,
First, are you using Wifi for Internet on the MBP?
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list, Wifi on the MBP.
In Shating on both, enable File Sharing, Screen Sharing, & Web Sharing on both.
Then with the Ethernet cable between the two, find the IPs of both, or use Finder>Go>Connect to Server>Browse... see what shows up.

How to create a cube/ods/infoobjects etc..and also why to create the same

Dear Friends
how to create a cube/ods/infoobjects etc..and also why to create the same objects.
thanks & Regards
Ramana

Hi Friend,
Creating Infoobjects
1. Go to RSA1 -> Modelling tab.
2. Click on Infobjects.
3. Create a new Infoarea.
4. Now create Infoobject Catalog for Characterstics and Key Figures.
5. Now create Char Infoobject under Char Catalog and Key figure Infoobject under Key Figure catalog.
Creating Cubes:
1. Right click the info area and choose create info cube.
2. Select the type of cube you wish to create and comnfirm your selections.
3. The next screen is where you actually define the cube.
4. Now you will notice the difference.
5. Place your cursur on key fig and right click and chose infio object direct input; chose your key fig for the cube.
6. Similarly for the dimension; right click the dimension and chose inbfo object direct input, chose your chars and out them in dimension.
7. Activate the cube.
Creating a ODS is also the same.(in step 1 choose create ODS)
Creating Multicube/Multiprovider
1. Right click the info area - chose create multi provider.
2. select the cubes , DSOs, info objects that you need for the multi provider.
3. On the right side of the screen, you will see all the objects that you selected and open the key fig and dimension and drag the ones you need to define the multi provider.
4. Identify the chars and key figs.
5. Acvitate the mullti provider.
Why we create them ?
Infobjects : They are fields in R/3. As we require fields in R/3 tables we require infoobjects in BI.
ODS : This actually is like a table in R/3.
Cube : This contain the Key figures.(e.g Sales quantity, Amount etc)
Hope it helps.
Regards
Hemant Khemani

How to set up triangle business in purchase order and intrastat

Hi all,
my question is, how to set up the supplier when they
instructs another supplier in an different country with delivery.
I can change the UID in the Goods Receipt but intrastat ignores this.
thank you
Gerhard
Edited by: Rui Pereira on Jan 19, 2009 4:53 PM

Hi Gerhard,
Sorry for very very late reply.
But I want to know if you are raising PO on supplier A then why you required track of supplier B.
Now just see,
If you want to pay any extra charges for supplier B then you can make this transaction by using Landed Cost functionality. In that in Broker field you put supplier B . so that supplier B's account also get hitted.
But I want to know why you want to consider tracking of supplier B. Supplier A can purchase material from anywhere. You have to make A/P Invoice on supllier A only.
Plz revert back if it not solves your problem.
Thanks
Yatindra

Could somebody explain to me how to set up a VPN on my iMac and access it on iPhone and computer?

I'm mainly using it to bypass an internet block. Could you explain in detail how to set up a vpn that will also work on iPhone? Do you have any recommended applications for me to install? Thank you

To run a public VPN server behind an NAT gateway, you need to do the following:
1. Give the gateway either a static external address or a dynamic DNS name. The latter must be a DNS record on a public DNS registrar, not on the server itself. Also in the latter case, you must run a background process to keep the DNS record up to date when your IP address changes.
2. Give the VPN server a static address on the local network, and a hostname that is not in the top-level domain "local" (which is reserved for Bonjour.)
3. Forward external UDP ports 500, 1701, and 4500 (for L2TP) and TCP port 1723 (for PPTP) to the corresponding ports on the VPN server.
If your router is an Apple device, select the Network tab in AirPort Utility and click Network Options. In the sheet that opens, check the box marked
Allow incoming IPSec authentication
if it's not already checked, and save the change.
With a third-party router, there may be a similar setting.
4. Configure any firewall in use to pass this traffic.
5. Each client must have an address on a netblock that doesn't overlap the one assigned by the VPN endpoint. For example, if the endpoint assigns addresses in the 10.0.0.0/24 range, and the client has an address on a local network in the 10.0.1.0/24 range, that's OK, but if the local network is 10.0.1.0/16, there will be a conflict. To lessen the chance of such conflicts, it's best to assign addresses in a random sub-block of 10.0.0.0./0 with a 24-bit netmask.
6. "Back to My Mac" on the server is incompatible with the VPN service.
If the server is directly connected to the Internet, see this blog post.

How to set input ready query to display mode and set edit mode in WAD?

when I create A input ready query but not set query propery start query in change mode ,but I want to set this query in input ready mode ,how to set this in WAD?
hope anyone can help me
regard by
wenlong

Hi,
      You can get all the info from this thread , try it out
       WAD - set data entry mode
       Hope it helps.
Regards,
Priya.

How to set the Codec, Frame rate, Bit rate, and Resolution for iMovie 10.0.5

To upload a video to Vimeo, I need to be able to set the codec, frame rate, bit rate and resolution to make sure the file is compressed to under 500 MB. Where in iMovie 10.0.5 am I given the option to adjust these settings?
Thank you!

Another question is in continuous mode, NI DAQmx uses Samples per channel to determine the buffer size. But according to the website you specified, it says if the acquisition is continuous (sample mode on the DAQmx Timing.vi is set to Continuous Samples), NI-DAQmx will allocate a buffer according to the following table. And for sample rate between 100 - 10,000 S/s, the buffer size is 10 kS. So if I set the sample rate to be 5000 S/s, and set the Samples per channel to be 20000, then what exactly the buffer size is? 20 kS or 10 kS?
Thanks.

How to set up outbox mail SMTP etc.

II've lost the ability to sends still have mail in outbox. Need to set up correctly and require method and input etc.

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
http://support.apple.com/kb/TS1944
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say “Cannot Connect to Server”?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
Gmail Account Will Not Connect to Gmail Server
http://support.apple.com/kb/ts3058
How to Delete Email on the iPad
http://ipad.about.com/od/iPad_Guide/ss/How-To-Delete-Email-On-The-Ipad.htm
How to Mass Delete Emails from iPhone and iPad Inbox (with video)
http://suiteminute.com/how-to-mass-delete-emails-from-iphone-and-ipad-inbox/
How to delete ALL mail messages from iPhone/iPad in one step
http://www.conferencesthatwork.com/index.php/technology/2014/01/how-to-delete-al l-mail-messages-from-iphoneipad-in-one-step/
How to add, send and open iPad email attachments
http://www.iskysoft.com/apple-ipad/ipad-email-attachments.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
Importing a Contact List CSV to the iPad
http://techchannel.radioshack.com/importing-contact-list-csv-ipad-2235.html
iOS: ‘Mailbox Locked’, account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iCloud: Create a group and add contacts to it
http://support.apple.com/kb/PH2667
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
How to delete an email account on your iPad
http://www.shoppepro.com/support/knowledgebase/228/How-to-delete-an-email-accoun t-on-your-iPad.html
 Cheers, Tom

How to set up Email in S60v3/5/^3 and bypass the N...

There are many threads on this board that all say the same thing and usually are about how Nokia Messaging or email is not working or syncing.
In an effort to have a base-line to assist with these, I have made the following tutorial to help users to bypass the Nokia Messaging (NM) as it is the auto-default to set up email on Nokia devices.
NM allows for “push” email, which will not keep you constantly online and will allow for marking your server email with what you have on your device. Ie-if it is read on the device, it will be marked as read on the server, deleted, then deleted, etc.
When you bypass the NM, you will lose the “push” but you can setup most email as an IMAP4 which will do the same thing, and you can select what folders to sync, and how often to have them sync, not keeping you online.
This tutorial was done on a Symbian s60v5 device, and while some of the dialog may be different among devices, the process is relatively the same when bypassing NM.
Open the email client, select options
Select Settings
Select E-mail
Select Mailboxes
Options
New mailbox
E-mal wizard will show up, tap Start
Next screen, Preparing for installation:
If asked, allow to use network. It will default to network to allow for set-up of NM.
If first time setting up email, this screen will show, “Welcome to E-mail setup” after you have done it once, it may not show up. Tap Start.
Enter E-mail address, then tap OK
Splash screen
Enter Password, then tap Ok.
Splash screen
This is the screen where you can choose between the NM and the internal email client. Aka, Terms of Service (on some devices you have to “agree”) (aka-TOS). The default is Yes! Activate my Nokia Messaging account, and if you have already set one up, it will say, “Add to my Nokia Messaging account.
You need to select “No Thanks. I’ll check for new messages manually.” Or “Create a separate account that uses manual delivery.
Splash screen
Confirmation screen. Select Ok.
Your new mailbox may not show up in the next screen which is supposed to show all the mailboxes set up. It is a slight glitch in some phones. Just tap the back button and then mailboxes, then you should see it set-up in the mailboxes as shown. Highlight your new mailbox and then select options to setup the settings of the email address.
You will need your inbound and outbound server settings and ports and securities if needed. You should be able to google for the various email types and if it is a company email, you should be able to get this information from your system admins.
The following are just some screen shots so that you can see the process to follow. While the NM will sync and mark messages as read the same in the inbox, if you set up your email as an IMAP4, it will do the same and sync all the folders on the server as well. There is an option to for how frequent you would like your email to auto-sync, just as with the NM. AND what days you would like it to work!
As there are older, the same, and newer versions of the Symbian and NM, this should help many people as least have the right guidance to bypass it if they wish and get on with consistent email service without using the NM.

I managed to set up an account manually on the C7 but I had to trick the email application by entering an invalid email address and password. After it could not find my account it then opened up all the settings and permitted me to add the manual IMAP settings, reply to address and other details. After I committed the settings, the phone recognised the account as a gmail account and it locked down all the settings again so I could not go back and change them if wrong.
I was quite chuffed with myself for seemingly resolving all my issues.....but on using the new account settings I could not sync the gmail sent / bin folders. All the other folders synchronised fine and when I send email it has the correct reply to address. Strangely this matches the best results I obtained when connecting using the Mail for Exchange settings so am no further forward. I am a little confused by this as when I let the phone set up the Gmail account on it's own it can sync everything.....but I just can't
I am now hoping that the new software update (PR1.2) gets email working a little better....well when I eventually get it hehe.

How to set up a new plant in SRM and user that?

Hello
I have run the reoprt BBP_LOCATIONS_GET_SELECTED I am getting a message
Program end reached the apprlication Log.BBP_GET_LOCATIONS generated.(SLG1)
When I go to BP and find my BP for the plant is generated.
but when I go to the attributes tab for selection of my newly set up plant in F4 it does not list my plant in that. So I cannot assign the Logical system to that Plant.
Please do suggest me? how to resolve this issue.
Best Regards,
Sairam.

Hello
I got my questioned answered it got resolved.
Thanks to Yann
BR
Sairam.

How to Set Up Time Capsule With Airport Extreme and Airport Express

Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?

evelK wrote:
Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?
I'd first use AirPort Utility to "Save a Copy As" of your AirPort Extreme settings. Then disconnect it, connect the Time Capsule in its place, and use AirPort Utility's "Import" function to read those settings. (Both of those functions are under AirPort Utility's "File" menu.) You may have to adjust a few settings. Once you have the Time Capsule working as you want, you can reconfigure your AirPort Extreme unit as you wish.

How to set-up a wireless system for Mac and Windows?

In a few weeks I will visit my brother in Tennessee, USA who has a cable modem (very good speed - "Comcast") connected to one desktop PC (Windows XP I believe).
I want to spend 2-3 weeks at his home using my MacBook core duo (May 2006 version) via wireless-- and what is the BEST way to install a wireless internet access for my brother that I can use for the 3 week visit? NOTE: After I leave, this has to work for him wireless with his PC's - not Macintoshes. But I want to have the flexibility to be in several rooms of his long (but single story) home during my stay.
Can I use an AirPort Extreme Base Station "n" and if so, will my MacBook work with this at maximum download / upload speed (i.e. equivalent to the cable) - and will my brother's PC's also be able to connect? Or is there another Airport base station?
OR-- should I head down to "Generic Computer Store" and just by a wireless router (WiFi)(think that's what they call them) and connect this to his cable modem? IF SO WILL THAT WORK FOR MY MAC?
Thanks for any comments or references here -
Regards,
Steve

Can I use an AirPort Extreme Base Station "n"
Yes.
and if so, will my MacBook work with this at maximum download / upload speed (i.e. equivalent to the cable)
The speed of your internal network generally is much much faster than the speed of your internet connection. Unless he has an internet connection faster than approx 6Mbps then even dropping down to the old 802.11b Airport would not seen any decrease in speed of downloads etc...
and will my brother's PC's also be able to connect?
If his PC is 802.11b/g-compliant, it shouldn't have any problems connecting to the AirPort base station.
Or is there another Airport base station?
The other AirPorts would work, but the AirPort Express & older 802.11g AirPort Extreme base stations have a max. range of 150 feet.
OR-- should I head down to "Generic Computer Store" and just by a wireless router (WiFi)(think that's what they call them) and connect this to his cable modem? IF SO WILL THAT WORK FOR MY MAC?
That is always an option as well, especially since he will be the primary user throughout the year. I'd suggest going with a brand name, like Belkin, D-Link, or Linksys for the wireless router choice.

How to set up connection for directv receiver, TV, and home theater system?

Can some one please show me the CORRECT way to connect my Directv receiver (it has no HDMI), Panasonic Viera HDTV (has 3 HDMIs) and my Samsung home theater HT-Z510 (has 1 HDMI)? The second question is with the set up that you advise, can I play the TV sound through my home theater speakers? and How do I do that each time I want to listen the TV sound through my home theater speakers? I am new and confused about all this so please provide or explain step by step please. Thanks in advance.

Making sense of your connections on a message board is never easy. Hopefully you can piece this information together.
Direct TV box to Panasonic TV using S-video cable....assuming it's standard definition. Component video if the box is HD. Run standard stereo RCA cables to the appropriate input for sound threw the TV speakers.
Your Panasonic TV will have a set of stereo(left/white,right/red) outputs. Run cable from that output into the same inputs on the Samsung surround unit. Use the sound units effects to acheive simulated surround. This is assuming you have no digital outputs on your box. If you do, you'll be able to get 5.1 when available using a digital connection.
Good luck.
Disclosure: Former BBY employee.

How to set different relations to object Primary UID and to another UID?

I am a quite experienced in data modeling, but not too much in SQLDM. The problem is I can not find in SQL DM a feature that allows to set up two different relations between two objects with different set of parent-child attributes for the relations. E.g. object A has PK attribute A1 and attribute A2 as UID. When I am trying to create 1:M relation to another object B it always generates attribute A1 in the object B, although my intention is to create two different relations with different "parent" attributes A1 and A2. The relation property -> Attributes window does not allow to edit attributes. It's not a pure theoretical question. In the real word e.g. ISO_CURRENCY table has two unique identifiers for the currency - alpha and numeric and some data have FKs to first or second UID. Could someone give a clue how to handle that in SQL DM, please?

Thanks a lot David,
I read the thread you pointed carefully. IMHO the ODM problem in the light of this discussion is that the ODM Logical Model is not a Logical Model :) The classical ERD model which ODM is used for logical modeling is not supposed to reflect the way which the relation is implemented in the database model which can be not relational in general. But ODM creates "attribute of relation" in the child table demonstrating the relational database approach. So we have Logical Model as Relational Model with some kind of restrictions like I mentioned as the question for the thread.
IMHO It'd be more abstract from the database model if the ODM logical model relation implementation is not shown in the logical model and it can be altered on the relational model generation stage (default mode could be FK generation based on the object PK).

How to set the Default value in the picklist and LOV

Hi All,
I have created a table with some of the columns as picklist and some of the columns as Lovs to insert some data into the tables as per the client requirement.
I want to make one value as default for the picklist and one value as default for the Lov.
Could you please let me know how can we show one value as default in the pick list or Lov.
thanks in advance.
jay

can u please help how can we set the initial value dynamically with the userid
For that i was passing the value from process Request of the lovCO by using the get user id to the vo query in the vo
but its not giving the initial value as default dynamically depending on the user id
could you please let me know the solution.
Thanks
Ajay

How to set a few runlevels in /etc/inittab and GRUB?

Similar Messages

Maybe you are looking for