How to set a *long* SIP password in SPA3102?

Hello,
I'm trying to configure the PSTN Line of a SPA3102 with a service provider that requires a long password. It is 64 characters long, and I suspect that is the reason the registration is not working.
I'm pretty sure that everything else is OK. I have enabled the syslog debugging feature, so all the SIP packets exchanged during the registration are dumped. The conversation is roughly the same that happens when registering from Asterisk (except for the Call-ID and the User Agent, obviously), but the authentication values look wrong. In fact, the service provider's proxy keeps answering "407 Proxy Authentication Required".
Has anyone else tried this? Who should I contact to know if it is a firmware bug and if there is a chance that it is fixed in the future?
In case it is possible, it would be perfectly fine with me to send the password, or the precomputed HA1 value, over XML provisioning -- I'd just like the adapter to work with this service provider.
Thanks!

You have mentioned that you are registering the PSTN line of the SPA-3102
to VOIP provider which provides long password.
I need to know who is the service provider and description of network
setup. If the SPA-3102 is connected directly to the modem and internet is
working fine, then there could be a problem with the VOIP information from
your service provider or VOIP ports are block by your ISP.
Have you called your VOIP provider about this? Have you tried registering
the SPA-3102 using free VOIP account like FWD and see if that works?

Similar Messages

  • Can anyone please tell me how to set a long tip dynamically?

    Hi Team,
    Could you please tell me how to set a longtip dynamically??
    Thanks,
    Swetha S

    Hi Shweta,
    As mentioned, the parameters for the setLongTip(OAPageContext pageContext, String tipMessageApplShortName, String tipMessageName)
    Instead, you are passing setLongTip(pageContext,String string). Put in the Message Application Short Name and respective Message name in above method parameters.
    Regards,
    Zahid

  • How to set "User cannot change password" on W2K accounts.

    Hi gurus,
    I need to set (from create user form) "User cannot change password" on W2K accounts.
    I was expected that some value of userAccountControl attribute on AD could do the job, but I realized that it is not so (look also to http://forum.java.sun.com/thread.jspa?threadID=593193&messageID=3108889).
    Thanks for any suggestion.

    Yeah thats right, I have implemented the same using nTSecurityDescriptor attribute

  • How to set a MS Access password (jni?)

    Hi there,
    i searched the forum and i found some posts about this topic, but no real solution.
    There are programs written in C, which can read the password out from a database, so i think, there must be a function to set one? I also think the WinAPI could help me, but im not the best C programmer and i dont know where to start. So, can anyone help me to get a solution?
    Thanks a lot

    You "might" be able to do it through "normal" JDBC and an SQL statement.
    Ms Access isn't really a "grown up" database.
    You actually might find that the likes of MySQL is FREE, more powerful, and allows you
    do a lot through SQL.
    But I found this SQL snippet from here....
    http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnacc2k/html/acadvsql.asp
    ALTER USER username PASSWORD NewPassword OldPasswordPs. this is really a microsoft question, not a Sun Java question !
    regards,
    Owen

  • Need Help, Cannot figure out how to set up a network password

    Also, i can connect to the internet, but the light in the base is always flashing amber

    Hello, cb1981. Welcome to the Apple Support Discussion Forums!
    Let me be sure I understand correctly:
    1. You have an AirPort Extreme that is flashing amber.
    2. You are able to access it via AirPort Utility.
    3. You are having trouble setting a password for the wireless network.
    Is all of that correct?

  • How to Set up New Sync Password

    This problem started when I updated to 9.0 in my HTC EVO 4G. Firefox Sync used to have an option to delete the Sync and apply for a new Sync key in the old FF mobile version. Whenever I have problems with the Sync, I can always ask it to apply for a new Sync key and it'll give me the new Sync Key so I can enter in my Laptop. Since 9.0, that option is no longer available and I have been having problems sync between my mobile and laptop. It kept saying "Connecting" but never finished and there's no way I can stop it and restart, except to RESTART FF. Even if I do that, it'll still stuck on CONNECTING.
    So my question is how can I delete my old Sync Key in my Mobile so I can enter a new Sync key in my laptop in order for the Sync to work?
    Thank you.

    connect your ipod to itunes and then just hit on update or restore that will wipe off everything from the device, it will be as a new one and then just transfer anything you want as per normal

  • How to set up guest password?

    I still cannot figure out how to set up a guest password on my wireless network.  I'm trying to use 192.168.1.1 but dont see an obvious place to set the information.  And do I have to connect to router to the laptop before making the changes?

    Well what model number router do you have?  If it is a E series you must load and run the Cisco Connect software to configure the Guest Network.

  • How do i set up my voicemail password

    How doI set up my voicemail password? this box keeps popping up asking for my voicemail password

    Voice mail is a carrier feature.  Contact your carrier

  • I have an iTunes account set up long ago on my home pc. My pc at home is antiquated and I can't interface with my account to edit acc. Info. Now I have other devices, iPhone 4 and iPad. I need to reset email apple Id and pw from iPad. How?

    I have an iTunes account set up long ago on my home pc. My pc at home is antiquated and I can't interface with my account to edit acc. Info. Now I have other devices, iPhone 4 and iPad. I need to reset email apple Id and pw from iPad. How? Should I just create new account? Don't want to lose 1500 songs.

    Hey Frankgates!
    I have an article here that can tell you how to do this:
    Apple ID: If you forget your password
    http://support.apple.com/kb/HT5787
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • N8; How to set up SIP and make (WiFI & 3G)VOIP cal...

    N8 only comes with SIP software and you need to download the the VoIP setting software at this link (use VoIP 3.1):
    http://www.forum.nokia.com/info/sw.nokia.com/id/d476061e-90ca-42e9-b3ea-1a852f3808ec/SIP_VoIP_Settin... 
    You can use the N8 web browser and load directly from the site to the phone.
    then go to:
    Menu>settings>connectivity>Admin.Settings>SIP settings
    option>New SIP Profile>use default profile.
    This window needs to be configured with your VoIP provider setting which may be found on their site or just do a search. I used the settings from my previous phone. I have Gizmo VoIP and will be using the setting for this service as an example to set up Wifi and 3G SIP setting
    Profile Name> Gizmo, (assign the name of your provider e.g.. Gizmo, Google talk, etc)
    Service profile> IETF
    Default Destination> WiFi
    Public username: sip:[email protected] (Input your VoIP provider info)
    Use compression> No
    Registration> When needed
    Use security> No
    Then goto Proxy server:
    Proxy server address> siproxy01.sipphone.com (use your provider proxy address setting)
    Realm> proxy01.sipphone.com (use your provider setting)
    Username> (use your username)
    Password> (enter your password0
    Allow loose routing> Yes
    Transport type> UDP
    Port> 5060
    Go back and then go to Registrar server:
    Registrar server address> siproxy01.sipphone.com (use your provider Registrar setting)
    Real> proxy01.sipphone.com (use your provider setting)
    Username> (use your username)
    Password> (enter password)
    Transport type> UDP
    Port> 5060
    Again folks above is just an example. You must use your provider settings.
    Then when you are done go back to:
     Admin setting> Net setting>Advance VoIP setting>Create new service> choose the SIP profile shown, e.g.  Gizmo 
    This will configure the VoIP setting with the particular SIP profile. It will also add a SIP Tel profile Pane in your Contacts folder, Internet call option to the contacts list and Phone log.
    Now go to the SIP pane in Contacts folder, sign in and then make a test call . To make a SIP call just go to a contact and choose Internet call. If you configured everything correctly, it should work and you are done.
    For 3G connection, follow above direction and create new SIP profile with new name (e.g. Gizmo (3G). All settings are same except:
    Default destination>Internet
    Then set up the VoIP setting with the new SIP profile by going to:
    Admin setting>Net setting>Advance VoIP settings>Create new service> Choose the SIP profile you just configured e.g. Gizmo (3G)
    Then:
    Admin setting>Net setting>Advance VoIP settings>VoIP service>choose the 3G SIP profile, e.g. Gizmo (3G)>Profile setting>>>>>
    Go down to AWCDMA> set it to "on"
    Exit out of everything. Go to SIP (3G) pane in the Contacts folder. Sign in and make test call.
    I have configured many Mobile phones and found the N8 somewhat touchy. But, the sound quality on Gizmo VoIP using both WiFi and 3G was great, no echo or any problems.
    Useful hints:
    If it does not connect or make a call, you need to check the SIP setting for any error. If you find any problem there, you must first remove the SIP profile in the Net setting. Then go to the SIP setting and correct the problem. Double check everyting, go back to Net setting>Advance VoIP setting>Create new service and add the SIP profile. The reason is that when you Configure a VoIP setting with a SIP profile, the SIP info is permanently loaded and will not change even if you make any change in the SIP profile. So any time you change anything in the SIP profile (even the password) you always need to remove, make correction and then reload the corrected SIP profile to the VoIP setting.
    There are also few Mobile service providers who have blocked VoIP on their data network service. So, just check with your service provider. In US both AT&T and TMobile have open network for VoIP.

    Hi
    I have an unbranded N8 and am trying to get VoipCheap to work.
    I have tried to set up VOIP but still facing a problem or 2 so please assist me.
    I have an active account via VoipCheap.com with a profile name and password and it is verified.
    1/ When I look in Admin Settings / Sip Settings it shows VoipCheap with "not registered" under it..why?
    My settings when I click on VoipCheap are:
    profile name: VoipCheap
    Service profile: IETF
    Default destination: Internet
    Public username: sip:[email protected]
    Use compression: No
    Registration: When needed
    Use security: No
    Proxy server address: sip:sip.VoipCheap.com
    Realm: VoipCheap.com
    Username: [email protected]
    Password:  ****** (I have entered my password)
    Allow loose routing: Yes
    Transport type: UDP
    Port: 5060
    Registrar server settings same as Proxy server settings.
    I have also gone to Net settings / VoipCheap settings and see:
    Username:  sip:[email protected]
    Password: ***** (I have entered my password)
    Default service: No
    Service connectivity: Internet
    In Contacts I have a VoipCheap tab with the icon for internet calling and it says
    Sign in (example)
    but when I click on this it shows connecting (via my internet connection) but hangs there - it does not seem to connect............
    what do you think I am doing wrong, please ????????????????

  • Just replaced my iphone 4 with new 4.  restore from icloud is hung on an app I no longer use (password probably expired) how can i get the restore to move on to the next app

    just replaced my iphone 4 with new 4.  restore from icloud is hung on an app I no longer use (password probably expired) how can i get the restore to move on to the next app

    Read another post in the forum about this and it appears this app also installs a profile with a proxy service that you will have to try and delete as well. Check that out.

  • I cannot figure out how to set my apple id to use: itunes (two of accounts), apps store and Itunes store. How do I make one password that will be recognixed by all these devices?

    I cannot figure out how to set my apple id to use: itunes (two of accounts), apps store and itunes store. How do I make one password that will be recognized by all these devices? My apple id is constantly not working.

    Hi Lrwill,
    If the apps that are on your son's iPad were purchased under his Dad's Apple ID, then signing your Apple ID onto the iPad will not help you with updating those apps.
    Also, if the iPad was sync'd with his Dad's iTunes library, then hooking it up to your computer/iTunes library, will require you to reset the iPad, and everything that was loaded under the other Library and Apple ID will be wiped out.
    Can you provide a little more info about what was set up under which Apple ID and what iTunes library the iPad was sync'd with?
    Cheers,
    GB

  • How do I get into iTunes to access Netflix, when I get "iTunes unable to connect until time has been set", after submiting my password?

    How do I get into iTunes to access Netflix, when I get "iTunes unable to connect until time has been set", after submiting my password?

    You need to follow the instructions in this article that best apply to your situation:
    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
    If you do not have a backup in either iCloud or iTunes, then you will have no way to retain the information on your device because you will have to restore it in order to access it again.
    Sorry,
    GB

  • How can I set up a second password on my teenager's iPhone

    How can I set up a second password on my teenager's iPhone

    What do you mean a second password? A second password where?
    Cheers,
    GB

  • What can I do? I've forgotten my password and dont remember the answers to my sercurity questions, and no longer have access to the email account i used for backup. How do I get my icloud password reset?

    What can I do? I've forgotten my password and dont remember the answers to my sercurity questions, and no longer have access to the email account i used for backup. How do I get my icloud password reset? Please help. Thanks in advance.

    Please see Kappy's User Tip here:
    https://discussions.apple.com/docs/DOC-4551

Maybe you are looking for

  • Report on remote users mapped drives

    After a very thorough search, I can't find anyone else who has had this question answered. I have a need to on-the-fly report on the mapped drives and their letters of users on remote computers. Running "Get-WmiObject -Class Win32_MappedLogicalDisk |

  • Mutating Table workaround

    I have a trigger that fires when field A is updated. I would like to use field A to obtain a field in another table B and update the table that the trigger is on with the value of field B. I know that this would create a mutating table error, but I w

  • Importing RAW files with keywords from Bridge

    Hi everyone, I downloaded the trial version of Aperture and have now imported RAW files (Canon 20D) with keywords and IPTC data applied via Bridge. The import of the RAW files was no problem however the files lacked the keywords and IPTC data, which

  • SQLDeveloper Version Control

    I have seen some posts regarding version control in SQLDeveloper. Evidently, integration with PVCS is a feature to be added in some future version. There might be an easier way to handle it. If SQLDeveloper would allow us to specify a "version loggin

  • Syntax to declare a variable in native sql

    Hi Experts, Please let me know the syntax to  declare a variable in Native SQL. Vivek Gupta