How to set a new MEASURE NUMBER in Logic

Hi guys,
I can't find this in the manual so hopefully you can help.
I am trying to SET a measure number 1 in the MIDDLE of my project.
What I have going on is this: I am trying to score to a video.. The Video quicktime that I was given is LONGER than it needs to be at the head. Like there's an extra minute or so of material before the part of the video at which the director needs music.
How can I set measure 1 to begin where I want to? I don't want to use the beat map function. I have the beat set at 116.
I want to make BAR POSITION 11 4 2 1 to be: 1 1 1 1
Is this possible? Just FYI — when I set the SMPTE for the video to start bar 1 1 1 1, the video doesn't seem to comply. It still butts the front end of the video to 1 1 1 1 no matter what I do (such that the timecode burn-in does not match Logic's SMPTE.)

Thanks for the quick reply - that's what I've been doing - but that still doesn't solve my problem. I basically want "X" number of "negative numbered" measures and BAR 1 1 1 1 will start like 11 measures into my project for example.
I found a workaround, which was to snip the video in Final Cut Pro before bringing it into Logic but I can't believe there isn't a better solution.
Literally every forum out there and every manual - if you type in "measures" or "measure numbering" there is no info.

Similar Messages

  • How to set a new SCSI number for a second drive?

    How to set a new SCSI number for a second drive?
    Walter

    Walter,
    This web site gives a good diagram:
    http://www.hitachigst.com/hdd/support/dpes/dpesjum.htm
    On a Quantum hard disk drive - they were the original equipment manufacturer (OEM) hard drive provider for Apple, you will see three or four pairs of pins on the green circuit board. They are labled:
    AO . .
    A1 . .
    A2 . .
    If no pins are connected, you have SCSI ID Zero This was the standard setting from the factory.
    If you short out the pins beside AO .__. , you have designated SCSI ID One.
    If you short out the pins beside A1 .__. , you have designated SCSI ID Two.
    If you short out the pins beside A2 .__. , you have designated SCSI ID Four.
    These values can be added together to get other SCSI IDs. If you have a jumper beside AO AND A1, that will add up to SCSI ID Three.
    Some of the quantum drives used tiny black plastic jumpers with tiny metal contacts. I have yet to find a store that sells the tiny ones. I get my larger jumpers from old PC motherboards that are being thrown away. A small piece of aluminum foil will work as a jumper in a pinch. Just make sure it soed not fall off and short something else out!
    Jim
    PS
    CD-ROM drives are set at the factory as ID 3. Internal drives are set at ID 0. I set my external SCSI drive at SCSI 1 so it does not conflict with the internal drive. Internal Zip drives are set at ID 5 and external Zip drives let you choose between 5 and 6. I set my burners at ID 4. Come up with a master plan for your devices like scanners and burners. Apple System Profiler will give you info on the device ID. If the computer fails to boot, turn off all but one SCSI device and make sure of its ID. Then check each subsequent device by powering up only one device at a time while booting from a CD at ID #3.

  • HT201304 Visa has changed for the purchase of Apple products, i did not know how I put the new MasterCard number to finish the process of buying products Thank you

    Visa has changed for the purchase of Apple products, i did not know how I put the new MasterCard number to finish the process of buying products Thank you
    i have ibad mini
    and iphone4
    laptop sony
    can you sent for me the anser

    Changing Account Information  >  http://support.apple.com/kb/HT1918

  • How to set a new value for formula field in crystal reports xi?

    <p>How to set a new value for formula field in crystal reports xi?</p><p>//formula</p><p>{@description}</p><p> </p><p>exemplo in VB6</p><p>crxSubreport.FormulaFields.Item(1).Text =  "&#39;Subreport Formula&#39;"  or</p><p>crxSubreport.FormulaFields.Item("description").Text =  "&#39;Subreport Formula&#39;"</p><p>How to in JRC?</p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p>

    Hi,
    This functionality is known to be very important and is a key part of the next major release of the JRC planned for the first half of 2008.
    Regards,
    <p>Blair Wheadon</p>
    <p>Product Manager, Crystal Reports</p>

  • How to set a new session variable?

    Hi all,
    Can anybody say how to set a new session variable in istore?

    Hi,
    you can use either
    pageContext.getAttribute(VAR, PageContext.REQUEST_SCOPE);
    or
    <%@page session="true" %>
    session.putValue
    session.getValue
    Hope this will help.
    Thanks
    Gurjeet

  • HT3728 after soft resetting how to set a new password to my airport express

    after soft resetting the airport exppress how to set a new password to my airport express

    Hello, MevanK.
    Thank you for the question.  You may find this article helpful in changing or creating a password for your AirPort Express. 
    AirPort Utility 6.x: Password-protect your wireless network
    http://support.apple.com/kb/PH5119
    Cheers,
    Jason H. 

  • Hi..i am trying to login i message but i cant access ,it thing i forgot my password number, please i need help,how i can reset new password number. please i need help.

    hi..i am trying to login i message but i cant access ,it thing i forgot my password number, please i need help,how i can reset new password number. please i need help.

    Go here.
    Good luck,
    Clinton

  • How to set all new vm with VLAN ID as a default settings and alose set the avaiablity high .

    How to set all new vm with VLAN ID as a default settings and alose set the avaiablity high .

    Hi Ramy,
    As a work around , you can create a VM without installing OS and  configure the Vlan of VNic , then export it .
    The new VM will be with Vlan ID when you import the "export file".(note : you need to select "copy the virtual machine " in the tab "choose import type" during importing ) .
    Hope this helps
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • I signed up yesterday with synch. I dont know my password and I need it to reset a new password. Please advise how to set a new password when I dont know old 1

    I signed up yesterday with synch. I don't know my password and I need it to reset a new password. Please advise how to set a new password when I dont know old 1
    I set it up on my "upstairs computer" and then came to my "downstairs computer" to synch and I can not get into the account because of the above password problem. I write down my passwords. I must have mistyped it or mis written.
    I want to change my password

    The new Sync version uses the Firefox account and stores the login data (username/email and password) under the https://accounts.firefox.com site heading in the Password Manager and use the signedInUser.json file in the profile folder to store the credentials once connected to the account to avoid having to enter the master password on each start.

  • How to update my new phone number after my U-verse phone service is disconnected?

    How to update my new phone number for forwarding  after my U-verse phone service is cancelled/ disconnected?

    I did call them. They said once the phone service is disconnected, there's nothing they can do about it. The thing is that when I called them to cancel the U-verse service yesterday, they did not offer me the opportunity to update the new phone #. This is so frustrating!

  • How to set up new icloud account

    how to set up new Icloud account on Mac Mini and connect to all my apple devices

    Mike..
    Instructions here > Apple - iCloud - Learn how to set up iCloud on all your devices.

  • HOW DO I GET A SERIAL NUMBER FOR LOGIC PRO IF LOST MINE ?

    How do i get a serial number for logic pro ?  i purchased it so long ago and i just cleaned off my computer and re-installed mountain lion . When i did an erase and archive i forgot to look to see the serial number . Now when i go to launch it it asks for SN . Any help would be great .

    http://support.apple.com/kb/ht1861

  • How to set a new DocumentBuilderFactory in my application?

    Hello Suners,
    I really need some help to set a new DocumentBuilderFactory in my application.
    I have a new instance of DocumentBuilderFactory with my settings and i need to set it in the application so that it use it to show some special DOM elements.
    DocumentBuilderFactory.newInstance("com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl", null) ;now i just need a clue how to make it recognizable to my application i mean how to make my application obtain a reference to the new DocumentBuilderFactory so it can use the factory to configure and obtain parser instances?.
    Edited by: abulseed on Aug 29, 2010 6:59 AM

    abulseed wrote:
    now i just need a clue how to make it recognizable to my application i mean how to make my application obtain a reference to the new DocumentBuilderFactory so it can use the factory to configure and obtain parser instances?.That code already produces a reference to the new DocumentBuilderFactory (assuming it's correct code). The normal thing to do with the reference would be to assign it to a variable. Then your application could use the variable, which refers to the factory, to do those things which it is supposed to do.

  • How to set a new email account for iCloud?

    How set a new email account for iCloud?

    There are two separate things you can do.
    You can add up to three 'email aliases' - these are additional addresses (not accounts) which deliver into the same inbox as the main account. (In fact it's a good idea to give out alias addresses, rather than the main address, because if they attract spam you can easily change them.) (New aliases can only be @icloud.com ones; @me.com addresses cannot now be created.)
    You should be aware before you start that once you've created an alias you cannot turn that address into a full iCloud account or move it to another account, and if it has @mac.com or @me.com versions these cannot be reinstated once deleted.
    More information on aliases here: http://help.apple.com/icloud/#mm6b1a490a
    Or if you want a completely separate account you will have to create a new iCloud account and sign into it in System Preferences>Mail, Contacts and Calendars. Note that any one device can create only three iCloud accounts.

  • Status Agent Not Reachable - How to set a fix port number?

    My EM 10g was working fine http://localhost:5500/em
    Now when I tried, it was not working. I looked into portlist and found out it there was additional port of 5502
    But when I logged into port 5502, Status Agent Not Reachable. Other links were working fine.
    I had even installed another DB called REPOS other than the default ORCL.
    All the services were up and running and I was just bouncing services back and forth and luckly I got the original port 5500 to work and then I did not got the error "Status Agent Not Reachable".
    So I just wanted to know how to set a dedicated port in case the port number changes back to 5502 and if I get the error again.
    Thanks in advance.

    Yes I installed multipe databases for eg ORCL was the default but I installed REPOS.
    I did not uninstall the db.
    Why does it show two different ports for ORCL 5500 and 5502 and for Repos it shows two ports but they are the same 5501.
    Everything is on my local machine.
    Following is from the portlist
    Ultra Search HTTP port number =5620
    Enterprise Manager Agent Port =
    iSQL*Plus HTTP port number =5560
    Enterprise Manager Console HTTP Port (orcl) = 5500
    Enterprise Manager Agent Port (orcl) = 1830
    Enterprise Manager Console HTTP Port (repos) = 5501
    Enterprise Manager Agent Port (repos) = 1831
    Enterprise Manager Console HTTP Port (ORCL) = 5502
    Enterprise Manager Agent Port (ORCL) = 1830
    Enterprise Manager Console HTTP Port (repos) = 5501
    Enterprise Manager Agent Port (repos) = 1831

Maybe you are looking for

  • Issue : Read a text file and print the same

    Hi, My requirement is to read a text file and print it the same way. import java.io.BufferedReader; import java.io.FileReader; public class CatFile { public static void main(String[] args) throws Exception      FileReader file = new FileReader("D:/Te

  • BAPI to create Steel Surch Debit (From VA01 Transaction)

    Hi, I need a bapi to create steel surch debit,if we give order type zdr1 in va01 it will create a steel surch debit memo,I tried with BAPI 1.BAPI_SALESDOCU_CREATEFROMDATA1 2.BAPI_SALESDOCU_CREATEFROMDATA2 3.BAPI_SALESDOCU_CREATEFROMDATA 1st  and 2nd 

  • How to view different sine waves in an array and make an fft of these and display it in one graph

    How can i cannect the output of my mathscript in the Spectral Measurements VI SIgnal Input. I'm having a problem since the output of the mathscript file "D" is DBL 2D. I dont know how to convert this data type in order to be connected to the signal i

  • Getting going with Adobe Drive 4

    So we're looking for a Digital Asset Management system. Since we use the Master Collection, times 14, so an Adobe solution would be great! We found Adobe Drive 4 to be a perfect fit for us... However getting started has been a pain in the ***.... We

  • Flash Professional CS4 Won't Install

    I recentally bought Flash Professional CS4, however the CD will not install. It will not even bring up the installation process. I am using an external driver and AutoPlay appears telling me that I can either Import Pictures and Video, View Pictures,