How to set a password to my airport express after using it for a long time without one?

First,i haven't ever set a password .
So what should i do when i was asked to input my passport?
THEN do you have original one or something like that?
Hope to get your help ASAP!
thanks!

Hi - the default password in English is "public" - I hope this helps.

Similar Messages

  • I have been using firefox for a long time, today when i tried to launch firefox i recieved "Firefox is configured to use a proxy server that is refusing connections." i dont know how to fix this. I didnt change any settings.

    I have been using firefox for a long time, today when i tried to launch firefox i recieved "Firefox is configured to use a proxy server that is refusing connections." i dont know how to fix this. I didnt change any settings, im the only person who uses this computer

    You can find the connection settings in Tools > Options > Advanced : Network : Connection<br />
    If you do not need to use a proxy to connect to internet then select "No Proxy"
    See "Firefox connection settings":
    * [[Firefox cannot load websites but other programs can]]

  • How to set a password on my airpot express?

    I am using for more than 5 years and i still don't know how to set tha password on it. any one can help?

    Assuming you mean the name and password of the Express itself, connected to the Express, open AirPort Utility on your computer, Select the Express from the list on the left side of the window, choose manual setup, the default password is public you can now rename the Express and change its password, and when finished Update.
    Edit: let me correct what I said above, use the assist mode for this work, it is very easy that way.

  • How to set up iHM79 speakers with airport express?

    I've got the green light on the express.. i can see it fine in airport utility. I've told iTunes to play thru the express. But the express does not seem to realize it has speakers attached to it. All i did was plug the speakers into teh express. I notice that in airport utility, it wants to know the name of the speakers. Well, near as i can tell, the speakers don't have a name, and there are very few directions that came with them, so i am lost.
    How do i tell the express that it's got speakers attached so that i can play music thru them wirelessly?

    William Boyd, Jr. wrote:
    Jo Dorais wrote:
    the express does not seem to realize it has speakers attached to it. All i did was plug the speakers into the express. I notice that in airport utility, it wants to know the name of the speakers.
    You can use AirPort Utility (in the Music panel) to give the speakers a name. That can be useful if you have more than one set of speakers attached to separate AirPort Express units so that you can distinguish between them in iTunes.
    I can't find a way to name the speakers.. it just asks me what the name of the speakers i want to use is.
    How do i tell the express that it's got speakers attached so that i can play music thru them wirelessly?
    Can you see the speakers in iTunes? One thing you may have forgotten to do is to check "Enable AirTunes" in that same Music panel of AirPort Utility.
    I had that done, but it didn't matter. I could see the express in iTunes, but not the speakers specifically.
    However, i have gotten it all to work by starting over. I ran across a tutorial here, telling me to plug the speakers into the express and THEN plugging the express into the wall, and then setting the express up with airport utility. So i restored it to default factory settings at that point and started from scratch. Voila! I still don't see names for the speakers, but they play music, so i'm not arguing.
    Now I've left my daughter to figure out where to find the app for her iPod Touch to remotely control things.

  • HT4587 How to set up an older version Airport Express on the 6.2 Utility

    I have a older version of Aiport Express  (M9470LL/A model A1084) and I get the following message when I try to set it up with the Airport Utility Version 6.2 on my iMac with Snow Leopard 10.8.2. -
    "This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information."
    Any advice on how to set it up ?

    Mountain Lion no longer supports the older A1084 AirPort Express that you have.
    If you want to try a workaround.....not supported by Apple.....see this article to find out how to add another version of AirPort Utility that will work with Mountain Lion and hopefully allow you to configure the AirPort Express that you have.
    http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

  • Airport Base station or Airport express to use wirelessly for dial up ?

    I have an Ibook G4 1.33 with a Airport extreme card.
    I currently have it set it up to the wireless modem that my phone company provided for me for my DSL service.
    Unfortunately I am moving to an area that does not have DSL service. I would like to know if I can set up my Ibook to use it wirelessly and have it connected to an Airport base station or Airport express in order to have my dial up service to work wirelessly???? So Airport base station or Aiport Express?? Many Thanks in advance- Geof
    IBook G4 1.33 12 1.5GB, Vintage Imac , Ipod with video, Ipod Nano   Mac OS X (10.4.3)  

    The only base station with dial-up capability (in addition to traditional ethernet equipped modem capability) is the AirPort Extreme Base Station w/modem. Check the Apple Store to look over the details, and make sure you are looking at the AEBS with the modem (there is also a version without a dial-up modem which will not work in your application).

  • I have a Airport Express I use primarily for AirPlay with my iPhone 4 (iOS6.1.3). Is there a way to set AirPlay as the default audio when connected to wifi?

    At the moment, when I re-connect to wifi (come home), I must select AirPlay as the desired audio.
    I know this is managble, but it would work a lot more easily if it was possible to select a default for AirPlay, or iPhone.

    I would suggest that you perform a "soft" reset on the AirPort Extreme Base Station (AEBS) that you just got from eBay. This type of reset will temporarily (5 minutes) disable both the base station and wireless security passwords so that you can access it with the AIrPort Utility to make the necessary changes.

  • MacBook Pro Battery: How can I protect my battery when not using computer for a long time period 3-months ?

    Hello,
    In 2014, I am expecting to be out of the states for a long period of time which is over 3 months. I am not planning of bringing my MacBook Pro with me. As a result, what would be the correct procedure for the battery in order to preserve it in the best condition when I return back and use the battery normally.
    Many thanks for your assistance!

    This is the article for non-Retina systems.  Not sure what to do fro Retina units:
    http://www.apple.com/batteries/notebooks.html
    I would also keep it with a friend/familymember you can trust to not take it out during that time and play frisbee with it to control humidity levels and temperature and access while unattended.

  • After using Firefox for quite some time,I am now unable to connect to the internet using Firefox.I get a pop up message stating that Firefox is configured to use a proxy server that is refusing connections.How to fix this?

    The message also states that I should check the proxy settings to make sure thaey are correct-I have no idea what this means,and says also to contact the network administer to make sure the proxy server is working.This is my home computer so I guess I am the administer.If it is any help I run system mechanic 10.5,but cannot find anything in system mechanic that I recognize as helpful.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • I just purchased the airport Express to use in hotels while traveling to create a wireless network from the hotels wired dsl.  A friend said to set up the network from home prior to traveling.  How do I set this up?  Thanks.

    I just purchased the airport Express to use in hotels while traveling to create a wireless network from the hotels wired dsl.  A friend said to set up the network from home prior to traveling.  How do I set this up?  Thanks.

    In addition to RyanJC's comments, the 802.11n AirPort Express Base Station (AXn) can store up to five different http://docs.info.apple.com/article.html?artnum=108081 configuration profiles. You will need to use the AirPort Utility to create & save these profiles.
    To create a new profile:
    Open AirPort Utility, select your AX from the list, and then, click "Manual Setup."
    From the AirPort Utility menu, select "Base Station," and then "Manage Profiles."
    Click "+" to create a new profile; give it a name, and then, click OK.
    Set options, such as network name, passwords, Internet connection method, etc.
    When done setting the options, click Update.
    To switch profiles:
    Open the AirPort Utility, select your AX from the list, and then, click "Manual Setup."
    From the AirPort Utility menu, select "Base Station," and then "Manage Profiles."
    Click on the desired profile, and then, click OK to apply the new profile and restart the AX.
    Just remember to switch to the desired configuration profile before removing power from the AX.

  • I have bought an iPhone4 and to be able to use it for the first time I connected into a friends itunes. Now when I want to buy itunes stuff on the phone it asks me her password. How can I set up again my itunes account?

    I have bought an iPhone4 and to be able to use it for the first time I connected into a friends' itunes. Now when I want to buy itunes stuff on the phone it asks me her password. How can I set up again my itunes account?
    Now I also have a macbook where I can sync my iphone but it doesn't allow me

    first of all only sync it with 1 computers itune account
    second settings->general->store click the appleID box with her appleID in it and log out

  • ATG 10.1.2 . How to set BCC password through CIM?

    I'm new to 10.1.2 version, trying to installing and configure it properly to learn it. With CIM I configured and set Publishing, Production and Staging instances.
    I ran BCC after installation (http://localhost:8180/atg/bcc) and was prompted for password - admin/admin or merchandising/merchandising set by default in previous ATG versions didn't work in 10.1.
    I learned from ATGInstallGuide that there is no default passwords preset in 10.1.2 and I have to set them though CIM. (Or ACC)
    Here what is says:
    *"Through CIM. During the post-installation setup process, CIM prompts you to set the passwords for the*
    *default profiles that your environment requires "*
    I do remember I was once asked one for password for merchandising user only, and the password I set didn't allow me into BCC, so probably it was for something else.
    Please, advise how to set BCC passwords for default account (admin, merchandising and etc) in CIM? I don't see this option in CIM - I everything in CIM and didn't find it
    Just in case there is the list of options CIM provides me after running:
    [1] Database Configuration - Done
    [2] Server Instance Configuration - Done
    [3] Application Assembly & Deployment - Done
    [P] Product Selection - Done (Oracle ATG Commerce Reference Store &
    ATG-Endeca Integration & ATG Site Administration)
    [A] Select Application Server - Done (JBoss)
    *[C] Custom CIM Plugin Launcher
    I'm still not able to open BCC application
    Edited by: 994398 on Mar 17, 2013 5:36 PM
    Edited by: 994398 on Mar 17, 2013 5:37 PM

    CIM will ask for new passwords when you select Create Schema and Import data. If you have forgotten the pwd given by you, you can reset it.
    Check the below threads regarding similar issue.
    ATG 10.1.1 BCC -Default password for admin
    not able to login into ATG Dyn admin
    Cheers
    R

  • How to set up Airport Express in Bridge mode for hotel use

    Please provide step by step instructions on how to set up Airport Express in Bridge mode for hotel use. I do not have a computer with me, only an iPhone and AEX 802.11n.

    +"Please provide step by step instructions on how to set up Airport Express in Bridge mode for hotel use. I do not have a computer with me, only an iPhone and AEX 802.11n."+
    AirPort Utility is the application that must be used to setup and make any configuration changes to the AirPort Express. I'm not aware of an "App" for this.
    If you could borrow a computer from someone there for 30 minutes or maybe use the computer in the lobby, you could download AirPort Utility and reconfigure your Express. To help with setup, use an ethernet cable from the computer to the Express to help AirPort Utility "see" the Express.
    http://support.apple.com/downloads/#airport

  • How to set min-password length on ASR1002?

    How to set min-password length on ASR1002?

    Try:
    security passwords min-length
    I'm not positive if it's supported in your version of IOS-XE but it is in some.

  • How to set the password encrytacion a database. Accdb from Visual Basic 2010 for a report. Rpl

    I want to know how to set the password encrytacion a database. Accdb from Visual Basic 2010 for a report. Rpl

    You have to connect via ODBC, then use code along the lines of what is described here:
    http://scn.sap.com/thread/3526924
    by me on March 28 and Jan on March 29.
    Also see KBA: 1686419 - SAP Crystal Reports designer does not recognize Access *.accdb file
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

Maybe you are looking for