How to set a Playback Region in FCE?

Is there a way to set a 'playback region' in FCE? I want to work on some audio fade-ins and fade-outs and need to be able to get 'real close' to the sound so I know where to drop and raise it.
I know this can be done in Soundtrack and Garageband, but I'm not seeing how to do this in FCE.
Any help is much appreciated.

Thanks, Tom. Been through your book a couple of times ... so far. Learn something new each time.

Similar Messages

How to set remembering playback position as default

Hi everyone,
I know how to manually set the "Remember Playback Position", however it doesn't remain set and keeps on dropping off.
does anyone know how to set it as a default value? or is there a bug effecting this functionality?

Hi Alessanrdo,
Thanks for your reply.
Actually the motive behing this option is to cover the "loop hole" of ARQ application. If you notice, we can "keep" adding the same role which is already assigned with different validity dates. ARQ does not control this!
Eventually, what happens that in the back end system, the user master record is overwhelmed with the same role entry with different validity dates!
Unfortunately, application does not have any control over this. Therefore, at least making "RETAIN" as the default provisioning action, we can have a "sort" of control over this. What happens is, if I add a role which is already assigned to a user and change the validity dates, there will not be any new entry in the back end system with the same role.
Hope this will help you understand the requirement and advise me.
Regards,
Faisal

How to set your playback in Premiere Pro CS5.5 with Tascum 144 Audio Interface?

I have an Audio Interface Tascum 144 and i want Premiere Pro CS5.5 to Play it from my tascum, except my computer speakers how can i change this setting?

Go into the PPRO Preferences under Audio... In there select the TASCAM interface...

How to get the values from table region and how to set

Hi,
I have a requirement as Seeded Page Having One Table Region having around 8 columns, In That Item Description field is there. My Requirement is I need add one more field for that Region and assign the value depending Item Description.
I will create one new Item in that region and will give name as Item, But how to set the values to Item Depending on Item Description.
Is it possible to through CO Extension, If yes..Pls help how to get it.
Thanks in Advance,
Hanimi

Hi Hanimi,
1. You need to extend the VO, add a new Attribute.
2. In VORowImpl of the extended VO, you can find the getter for your new attribute (example getItem())
3. In this getter method you can write some code like:
if("ABC".equals(getItemDescription())
return "XYZ" ;
-Prince
http://princekapoor82.blogspot.com

How to set up external hard drive and FCE 4

I am going to buy an external hard drive (firewire 400) and FCE4 but I am not sure how to set everything up.
Where should I load the software, capture to, and save projects?

FCE should always live on your system drive. Use the external as your Scratch Disk. You will select this in System Settings in FCE. I create a folder on the external for my projects and point FCE to it.
Keep your project files on your system drive as well as your autsave vault if you use that. You can put your other files, such as wavefrom caches on the external, though I leave them on my system drive.
Do not partition the drive. Format as OS Extended

How to set value of a column in report region

Hi,
I have a report region based on a query.In this my first column is selectlist "select row" having to values "yes" & "No".
I have two buttons on top of the region "Check all" and "uncheck all".
My requirement is when I click check all button all rows corresponding to "select row" column gets selected to Yes and when I click No all rows gets selected to "No".
Thanks
Vikram

Actully I want to set the value of a column in report region.
There are replies in the forum but in those the item is in form but not in the report region.
I am generating report region by using htmldb_item.selectlist and i dont know how to set value in these type of items.

How to set display size of a Region or Dynamic Region?

Hi,experts,
In jdev 11.1.2.3,
I drag and drop a task-flow into a jsf page to create a Region,
and set display size for the region, source code as:
===================
<f:facet name="second">
<af:decorativeBox theme="medium" id="db1">
<f:facet name="center">
<af:panelGroupLayout layout="scroll" id="pgl1"
inlineStyle="width:1200px;height:700px;">
<af:region value="#{bindings.trainflow11.regionModel}" id="r1"
inlineStyle="width:1200px;height:700px;"/>
</af:panelGroupLayout>
</f:facet>
</af:decorativeBox>
</f:facet>
=================
But, the Region is only showed a small fraction area on the parent jsf page whenever during design or run time.
How to set display size of a Region or Dynamic Region?
Thanks!

Hi,
the decorative box is supposed to stretch components in the center facet, so at runtime the region should stretch. Can you try with a static region to see if this is an issue with dynamic regions?
Frank

HT2397 How can I check what region my Macbook pro has been set at.

How can I check what region my Macbook pro has been set at?

It will have been set for the region in which it was purchased.
http://support.apple.com/kb/HT2397
Once you have set the region in DVD Player five times it cannot be changed. However see tis also:
http://support.apple.com/kb/TA25416?viewlocale=en_US&locale=en_US
Instead, use VLC to view videos from different regions:
http://www.videolan.org/vlc/download-macosx.html

How to set regions to the same size

Hi,
Is there any way I can set all the regions on a page to the same size to prevent a staggering effect?
e.g
------ region title 1 ------
------------ region title 2 ------------
--- region title 3 ---
I would like all titles to be the same length when looking down a page
e.g
------ region title 1 -------
------ region title 2 -------
------ region title 3 -------
What I have done in the interim is to create blank cells in each region, between the actual fields and then use nbsp; to pad them out and try and get the region headers to align that way. I am assuming there must be an easier way.
eg.
------ region title 1 -------
| field | blank | field | blank
------ region title 2 -------
| field | blank | field | blank
------ region title 2 -------
| field | blank | blank | blank
Any help would be appreciated.
Cheers,
Scott.

Hi,
Where can I post a screen shot of my form layout?
In the meantime, let me explain again. What I was trying to say is, depending on how many fields that exist within a region, a region will size to the largest fields it contains, depending on how the fields are layed out within the region.
Since I have 5 regions on my page going from top to bottom, what I am finding is that the regions are of different sizes, and I would like to make them all the same size, irrelevant of the largest field size it contains.
The overall effect will be that the region titles will all line up on both the left and right handsides as a user scrolls down the page.
If there is a way of acheiving this could you please let me know.
Cheers,
Scott.

How to set the particular city as a region for checking my device in SMP 2.3 HWC

Hi Experts,
I am doing a sample for finding the device with in the region or not like if i set the region as particular city like hyderabad, then it will show the next screen otherwise it has to show the alert message like "You are out of the hyderabad, you cannot access this app.",
Now i am able to get the current location latitude and longitude, now i have to set the region.
how to set the particular city as my region in SMP2.3 HWC.
Vamsi K

Hi Midhun,
Thanks for your reply, i just want to set the Hyderabad coordinates, and i am getting the current device location latitude longitude values. i am comparing those two values, if those were matched then i will go to the next screen i.e., something like hello welcome you are logged in, other wise just show an alert " you are out of the region, so you are not able to use this application".
Thanks,
Vamsi.K

How to set region relationship to default? And get it to disappear!

How do I get a region relationship to disappear in CCM9? I just can't get it to go away even with it set to systen default for Audio Codec prefernce list, Maximum audio bit rate, and Maximum session bit rate calls.

You have to set all of the dropdowns to Use System Default. If you did that and it still shows, then you're hitting the same thing I ran into this in 9.0(1) but didn't have time to open a TAC case over it. Likely a bug but five minutes of poking through the bug toolkit didn't reveal an obvious match.
Anyways, delete the region and create a new one. You'll be good as long as you don't set it to a non-default value.
Please remember to rate helpful responses and identify helpful or correct answers.

How to set Srilanka region?

How to set Srilanka region?
really worry for sms delivery report an call waiting not display in iphone.

Backup Your Data (Specially Apps)
General --> Reset --> Reset All Settings
And Then It Will Give You a Chance To Choose 'Sri Lanka" as Region.
So There You Go
But Remember To Backup Your Data

2 Data Sets - 1 Detail Region - HOW???

I need to feed two separate XML data sets to one detail
region. I tried a method (from a previous post) of adding both data
sets to one detail region, separated by a space. It will only
access the first data set listed and ignores the one that trails.
E.G. -
<div id="sidebar" spry:detailregion="emailData07
emailData06">
Thanks in advance for
any help!!!
Source follows:
<div id="content">
<div id="Acc1" class="Accordion" tabindex="0">
<div class="AccordionPanel">
<div
class="AccordionPanelTab"> 2007 Email
Archive</div>
<div class="AccordionPanelContent">
<div id="dataHolder" spry:region="emailData07">
<table id="products">
<tr>
<th width="16%" spry:sort="bDate">Date</th>
<th width="20%">Source Code</th>
<th width="64%">Offer Description</th>
</tr>
<tr spry:repeat="emailData07" class="even"
spry:setrow="emailData07" spry:hover="rowHover"
spry:select="rowSelected" onclick="MM_effectAppearFade('boxshot',
1000, 0, 100, true)">
<td>{bDate}</td>
<td>{sourceCode}</td>
<td>{campaign}</td>
</tr>
</table>
</div>
</div>
</div>
<div class="AccordionPanel">
<div
class="AccordionPanelTab"> 2006 Email
Archive</div>
<div class="AccordionPanelContent">
<div id="dataHolder" spry:region="emailData06">
<table id="products">
<tr>
<th width="16%" spry:sort="bDate">Date</th>
<th width="20%">Source Code</th>
<th width="64%">Offer Description</th>
</tr>
<tr spry:repeat="emailData06" class="even"
spry:setrow="emailData06" spry:hover="rowHover"
spry:select="rowSelected" onclick="MM_effectAppearFade('boxshot',
1000, 0, 100, true)">
<td>{bDate}</td>
<td>{sourceCode}</td>
<td>{campaign}</td>
</tr>
</table>
</div>
</div>
<div class="AccordionPanelFooter"></div>
</div>
</div>
<p>Questions? Revisions? <a
href="mailto:[email protected]?subject=Email Archive Query"
class="SelectedListBoxItem">Send Email</a></p>
</div>

<div id="sidebar" spry:detailregion="emailData07
emailData06">
<p id="boxshot" ><img src="{emailimage}"
alt="{bDate} Email Screen Shot" /></p>
<p align="center"><a href="{emailLink}"
target="_blank" class="SelectedListBoxItem"><b>View
Email</b></a></p>
</div>

Hey BSK,
There are 2 ways to write data references, one more formal
than the other.
Short: {nodename}
Formal: {dsname::nodename}
The formal version will always work.
The short version works when there is only one data set on
the region or, WHEN IT IS LISTED FIRST.
If you have a region with multiple datasets, data references
that come from the data set that is NOT first must use the formal
notation. This assures that we can distinguish between the data
sets, in case of duplicate node names.
So, for those data refs that come from emailData06, make them
{emailData06::nodename}
Make sense?
Thanks,
Don

How do I set the DVD region code via ARD?

We recently deployed around 200 MacBooks in a k12 environment and manage them via ARD & WGM. We forgot to set the DVD region when creating our master image and as a result, every single MacBook prompts for an admin password when attempting to use the DVD Player to view a DVD for the first time.
Instead of attending to each of the 200+ MacBooks personally and putting a DVD in and setting the region code one by one, is there a way I could do this via ARD? Unix command? Managed preference via WGM? Thanks, I appreciate any input.

I've been working on this very topic for about a year. Here's what you need to know.
1) setting the region code on your master image would result in the same behavior. Setting the region code triggers an update to the DVD drive firmware itself - it's not something that's stored in software. Obviously this is something that needs to be set on each machine individually. Setting it on the image won't affect the imaged-machines.
2) Apple seems to have gone to great lengths to hide the app that triggers this action. If they had provided a simple CLI interface to trigger this on a client machine we'd be able to use ARD to trigger the action on all of our client machines. Alas, this app is buried somewhere I can't find and seems to only rear its head when a DVD with a region code is inserted into the drive. There is one idea that popped into my head while at Macworld that I want to try to see if I can find this app but I have my doubts.
3) Failing my last ditch effort to find this app, I think our fallback will be to give users explicit rights to set the initial DVD region code on thier machines. This is something that can be done using WGM. There is a rule in /etc/authorication specifically allowing users/groups to set the region code for the first time. According to the notes, giving this access will NOT allow users to change the region code - which is a good thing - but only give them rights to do so the initial time. This way, we can empower our users to help themselves while also protecting them from resetting the region code accidentally.
In conclusion, I haven't found any way to script/push this command to a client machine. I'll definitely file this with Bug Reporter and hope Apple will give us a CLI or an ARD command to trigger this action after imaging.
G4 Mac OS X (10.4.8)
G4
G4

How to set up the loop?

I am trying to create a Frame, using BorderLayout and every time we click the center button, it will change the color in one of the region. But I dont know how to set up the loop to make it change one at a time. Below is my draft......Thanks for helping.......
Test.java
import java.applet.*;
import java.awt.*;
import java.awt.event.*;
public class Test extends Applet implements ActionListener
          Color []color={Color.red,Color.blue,Color.black,Color.green};
          private Button nb=new Button("North Button");
          private Button sb=new Button("South Button");
          private Button eb=new Button("East Button");
          private Button wb=new Button("West Button");
          private Button cb=new Button("Center Button");
          int buttonCount=0;
          public void init()
               setLayout(new BorderLayout());
               add(nb,"North");
               add(sb,"South");
               add(eb,"East");
               add(wb,"West");
               add(cb,"Center");
               cb.addActionListener(this);
               buttonCount=0;
          public void actionPerformed(ActionEvent e)
               for (int i=0;i<color.length;i++)
                    buttonCount++;
                    if (buttonCount%2==0)
                         nb.setBackground(color);
                    if (buttonCount%2==1)
                         sb.setBackground(color[i]);

declare a public variable count;
int count=0;
public void actionPerformed(ActionEvent e)
buttonCount++;
count++;
if(count==color.length)
count=0;
if (buttonCount%2==0)
nb.setBackground(color[count]);
if (buttonCount%2==1)
sb.setBackground(color[count]);
hope you got it.

How to set a Playback Region in FCE?

Similar Messages

Maybe you are looking for