How to set a prefer outgoing email, so i can start sending emails please?

how to set a prefer outgoing email, so i can start sending emails please?

If you use iCloud mail: iCloud- Mail server settings for email clients.
Mac Basics- Mail (OS X Mountain Lion)

Similar Messages

I just got an ipad mini and I dont know how to set up an icloud email, please help?

I just got an ipad mini and I dont know how to set up an icloud email. I know I have an icloud account but it is set up to my gmail. Can someone please help?

Have a read here:
http://support.apple.com/kb/ht4810

TS3899 I can't SEND email from Telus account in Alberta, Canada? Does anyone know how to set up the Outgoing server? Help! And thanks!

Can't SEND email from Telus account in Alberta, Canada, unless I go to web mail. Does anyone know how to set up the Outgoing server? Incoming is fine. Outgoing used to work. We changed it when we went to another location, and can't get it back. Telus support can't fix it. Neither smtp.telus.net NOR mail.telus.net works for Outgoing server to send mail. Please help! Thanks.

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

How to set up SAPconnect with email server

Hi,
Does any one know <b>how to set up SAPconnect with email server</b>
We are using workflow and when it fails it we are sending the notification mail to the user on his company mail id, i.e. [email protected]
This is working in the current production system. We are doing the new development which will replace the current production system. The existing Basis team does not know how it was setup in production system and how to set it up in the new system.
When we send any mail notification from workflow we can see the mail in SCOT transaction but it is not received at the specified mail address.
Can any one provide the configuration steps or any document for this.
Thanks in advance..
Pratik

Hi Pratik,
Check the following link:-
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
http://help.sap.com/saphelp_nw04/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
these link will help u to config SMTP.
And one more thing u have to do..
Go to SE11 n open Table sxnodes in change mode.
And change F_ESMTP field to false i.e. BLANK for the Field NODE = SMTP.
Hope this will work For U.
Regards
Sachin Dhingra

How to set up just an email account? - it's not working

Hi there,
Could someone please let me know how to set up just an email account for a staff member?
I tried "E-mail Accounts" - Add an email account - but the password verification NEVER comes through. I've tried send password recoved but does not work (ive deleted it and tried 3 different Password recovery e-mails - gmail / local and another BC one too).. nothing is working.
So then I read the knowledge base which is out of date:
http://kb.worldsecuresystems.com/000/bc_8.html?bc-partner says to set up an email account you need to go to Site Users (which doesn't exist) to tick "enable email" - so I tried Admin users but it has no email only option..

Hi Dandy,
You can still switch to V2 view to find things. Something I am still doing when I do these irregular jobs, as they only happen when a site goes live and that will only be once a month for us. Twice some months.
Although I just tried going to V2 and getting up the V3 view, but it didn't send me to the page I wanted.
I notice that there is a new tab in V3 called Email accounts, where you can set up email accounts now. Try there.
You will need to have the user set up first under Admin Users and User Roles first I expect.
Also check workflows are set up properly once you have gone into Email Accounts and set up the email address.
Or maybe just go back to V2 and do it all there. Click in top rh corner to get back to it.

HT5312 How to set up my rescue email account,so that can reset my security question?

How to set up my rescue email account,so that can reset my security question? The key is I need change my security question

You won't be able to add a rescue email address until you can answer 2 of your questions, you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the page that you posted from to add a rescue email address for potential future use

If someone phones my mobile number, they are prompted to leave a 10-second message which them comes to me as a text. I want real voicemail with real voices but I don't know how to set it up on my iPhone4S. Can someone help please?

If someone phones my mobile number, they are prompted to leave a 10-second message which them comes to me as a text. I want real voicemail with real voices but I don't know how to set it up on my iPhone4S. Can someone help please?

Ask your wireless provider. None of what you describe has to do with the phone itself.

I don't know how to put in alphabetical order my mailboxes. Can you help me please?

I don't know how to put in alphabetical order my mailboxes. Can you help me please?

Try to force it into recovery mode to restore it, as explained here: http://support.apple.com/kb/ht1808.

How do I uninstall HP printer software so I can start again?

How do I uninstall HP printer software so I can start again?

Run the HP uninstaller in folder in /Applicatrions/Hewlett-Packard/.

How do I save to outgoing email attachments folder in 8 as I did in 5?

I just upgraded from PSE 5 to PSE 8 and I use Incredimail, not Outlook. In PSE 5 there was an option to save outgoing email attachments to a folder for subsequent manual attachment to my email message. The online help seems to suggest this as the solution as well. However, I cannot seem to figure out how to set this up in PSE 8. In prefrences, the only options are Outlook, Outlook Express and Adobe Email Service. When I go through the routine of sending an email through Outlook (which is installed on my computer but which my wife does not use), the attachment can be found in a very deeply rooted Temp subdirectory. In PSE 5 I could cause it to be saved in a subdirectory under My Pictures/Adobe directory sorted by date of creation of email attachment. Can anyone please advise how to accomplish this in PSE 8? Your assistance is greatly appreciated. Thanks.

That's an application by application feature/standard that they need to adhere to. I have no problem with Photoshop doing what you describe. Check your Photoshop Preferences. Does this happen in every application?

How to set up basic POP email on N8

I've been reading up on all the email discussions about the N8, and it seems like some things work fine, while others need more development.
In my case, I would like to set up email using a basic POP email account setup. I have no need for "push" email right now - as I see it, receiving an email every half hour or so on my phone is an improvement over waiting until I get to my PC.
Ideally, I would like to leave the messages on my email server, so they will later on be downloaded to my PC.
I've noticed the following in one of the email discussions here:
"Cant believe no one else has responded with this before given the time this thread spans. I had this problem until I deleted and re-created my email (POP) accounts and then NOT accept the TOS at the end of the setup process. If you say YES and accept the terms, then your email accts get setup thru the Nokia messaging service and sent emails may get saved somewhere, but certainly not on the phone. You do not have to say yes to the TOS, just decline and finish setting up the email account."
Since I'm perfectly happy with the way email works on my laptop, using my existing servers, I think I should decline the TOS as described above.
I've found lots of guides on how to set up email on the N8. Can anyone here recommend one for how to do (only) what I need, in order to manually set up POP email on a N8, using the identical server information and settings that I now have on my laptop? Or, if this doesn't exist, can someone post the necessary steps here?
Thanks!!!

I have had a little play with this but will just outline what I found seems to happen because I did not thoroughly test it. Others experiences may be different.
If setting up a new account and one selects one of the listed email service providers and not "Other" then it sets up an IMAP account and gives the choices that Rayhipkiss describes together with the terms and conditions acceptance request. This can be seen after the setting up by looking in the settings for the server (which often, maybe always?, is a nokia.supl.imap one). If one deletes the server and server ports and replaces them with the same email service provider's pop and smtp servers and ports then the same setup choices that Ray mentions still remain. Once the account is set up you can always go back and change the server and port entries in the N8 setup for that account (see below for a difference).
However, even though one has set the pop ports it still seems to do an imap connection - this can be tested by setting up a Gmail account where one can turn off and on allowing imap server connections in the settings on ones Gmail account's setting on the webmail site. One finds that disallowing imap connections but allowing pop connections blocks the N8 even if one has entered the pop servers and ports on the N8.
Now, if when setting up the account on the N8 one selects "Other" it normally (see below) gets one to enter the address and pass for the account and then goes straight to allowing you to enter the servers and ports. Now if one enters these and it then takes one straight to the client for you to collect and send email. But now if you go back into settings for that account one gets the setting choices that I outlined i.e. the one that includes "Don't sync to server". If set up as a pop account it seems to behave as a pop account - for example, if one turns on the imap servers at the Gmail denying pop connections then if one tries to collect mail Gmail comes back with a certificate error (the certificate is for imap not pop). Unlike the settings menu giving the other settings Ray outlines this settings menu does not allow one to nominate a reply to address different to the address sent from and nor does it allow one to go back and change the server and ports. To change the server and ports as far as I can see if set up this way one has to reset up the account from the start.
OK, even stranger, then what I found is if I set up an account using the offered service providers, not using the "Other" choice then deleted that account and then reset up the same account using the "Other" choice it then behaved as Ray outlines including the terms and conditions acceptance request and also behaves as an imap account even if one enters the pop servers and ports. So the "Other" account setup choice seems to behave differently according to whether one has previously setup that account using one of the non "Other" service provider choices or not?????
I don't know if anyone wants to experiment further and discover more or clarify the behaviours. I just did some quick playing around so did not analyse it much, however the above is the general gist of what I found. It is sometime since I set up email accounts on my E52 but from memory it behaved much the same way as the N8 does and is generally weak on handling pop accounts - in fact I would suggest that many who think they are using pop servers will find that behind the scenes it is really using imap ones.
A real downer for me is for a pop account there seems to be no way to set up a reply to address in the sent emails that is different to the address sent from. This need for me being due to the way I manage emails across several machines.
I'm off to have a beer

How to enlarge font in outgoing emails

How might one enlarge the font in outgoing emails? Use Gmail, and older friends complain it is too small to read.
Thanks!

Thanks Razmee, but though it made it bigger on my phone, my correspondent still saw the tiny tiny text.
Was a good shot though!!!

How to set my "reply to" email address to an email forwarded address

I own my own url, which is my last name, and I want the emails I send from mail to actually look like they came from "[email protected]" and not from the cryptic email name that my dsl provider assigned to me. By the way, "[email protected]" email addresses actually is set up to forward emails replied to it back to my cryptic email address (that is my real dsl email address).
I almost lost myself there, but my basic question is how do I tell "Mail" to send out a different reply email address when I send someone an email.

Does your ISP/DSL provider allow customers to enter a different email address to be shown as the sending address for an email account provided by the ISP?
If so, enter [email protected] in the email address field under the Account Information tab for your DSL account preferences.
This will appear as the sending email address for the account.
If your ISP restricts their customers from doing this (some do since spammers don't provide a valid sending or reply to address with their bulk spam mailings), you can include a Reply To address field for the message header but the reply to email address must be entered manually for each sent message.

How to format body of outgoing email...

just wondering if "\n"'s should be added to the body of an outgoing email to prevent one long line of text or do most email clients automatically wrap the text...for example...
lets say i compose an email by holding down the number 2 for a few lines (linewrap is set to true)...if i sent this email, would most email clients interpret this as a multiline email or would it be just one long line of 2's...
thanx in advance

I'd assume you have no guarantee about the formatting applied by the end email client and add the new lines yourself.
In my experience, even this is not guaranteed to work as some destination clients (and/or mail servers) will enforce a line wrap inside the body of the email. That is, they will actually insert new line characters where there wasn't any.
The only way to have any control over formatting is to use a system in which formatting is specified.. like HTML. You could include an HTML part in your messages (in addition to the text part) which formats the messgae however you like. This is more likely (but still not guaranteed) to be honored at the other end.

How to set FROM ADDRESS for EMAIL activity in Process Flow

Hi all,
Can any one tell how to set(which address) FROM ADDRESS for EMAIL activity in Process Flow?
Thanks,
Suvvi

Did you set what OWB guide says:
To execute a process flow with an email activity, you may need to access different host machines and ports. New security measures implemented in Oracle Database 11g Release 1 restrict access to hosts and ports. You must explicitly grant access to hosts and ports that the email activity accesses using the DBMS_NETWORK_ACL_ADMIN package.
For example, the user OWBSYS needs to send an email through the mail server mail.example.com using port 25. The DBA must perform the following steps:
1. Create an Access Control List (ACL) for the user OWBSYS using the following command:
EXECUTE DBMS_NETWORK_ACL_ADMIN.CREATE_ACL
(’acl_for_owb_cc.xml’,’ACL for Control Center’,’OWBSYS’,’CONNECT’);
The ACL has no access control effect unless it is assigned to network target.
2. Assign the Access Control List (ACL) to a network host, and optionally specify a TCP port range. Use the following command:
EXECUTE DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL (’acl_for_owb_cc.xml’,’mail.example.com’,25)
3. Commit the changes made using the COMMIT command.

How to set a prefer outgoing email, so i can start sending emails please?

Similar Messages

Maybe you are looking for