How to set a shared calendar 'read only' for SOME users in ML server

I am setting up Mountain Lion Server and wish to set up a series of calendars to be used by a studio of approx 20 people - two calendars will show the kind of thing I'm trying to achieve.
Calendar A shows appointments and meetings - it can be viewd and edited by all
Calendar B shows who is taking leave and when - it can be viewed by all, but edited by only a small group of people
What is the best way to set this up? On The earlier version of the server we had set up calendars on the server and delegated - this is not possible on Mountain Lion Server.

I don't think you can do this strictly by personalization since you need to use SPEL, unless the attribute you will be using for the display to control readonly is already present in the VO. Basically you need to check a value, say Supplier, and have another attribute say readOnly, tthat is set to TRUE if the supplier equals your desired supplier and FALSE for all other suppliers.
Regards,
LC

Similar Messages

Shared folder read-only for other users

We setup a new iMac with three accounts for members of the family. Two have admin rights. We installed Quicken Essentials 2010 for Mac, and put the Quicken data file in the Users/Shared/Quicken folder. Everything worked great for user #1 who copied the file to the shared Quicken folder.
User #2 (also an admin) was not able to open Quicken, as an error stating the file was read-only. I checked permissions, and set user1 and user2 with read/write and everyone with read/write. Basically, all permissions on that data file are read/write for everyone.
That still did not work. Then, I set user2 as the owner. Now, user2 can use Quicken and the file, but user1 cannot. Same error.
How do we get it so that files in the Shared folder are really shared and accessible to everyone?

The solution that I discovered to work: Place your quicken data file(s) on an external drive (or create a partition if you only have access to a single hard drive) and have permissions on that drive (o volume) set to "ignore ownership on this volume" It works for me. Both accounts can now access my single quicken data file. To set the permissions on a drive/volume, select the drive or volume, choose "get info" from the file menu and at the bottom of the get info window mark the box "Ignore ownership on this volume".
It might be worth your while to spend ten bucks on an ebook titled Take Control of Sharing Files in Snow Leopard. Take Control of Sharing Files in Snow Leopard discusses
sharing digital media files.
http://www.takecontrolbooks.com/snow-leopard-sharing?pt=INTERNAL

Make UDF Read-only for all users

Hi
Can i use any script to make a UDF read-only for all users?
i am looking at CPRF and CUFD Tables
thanks

Hi,
You should never try updating system table directly. That will against supporting policy by SAP.
Thanks,
Gordon

How to make a column as read only for update integrator.

Hi All,
i came across one issue while creating integrator.
for update integrator i have column rowid.rowid is a parameter. by using this(rowid) i'am updating.i want to make rowid column as read only .
if i enable read only for rowid,then it is passing null as parameter and inserting new row instead of updating the row.
If any one came across this problem you can help me in fixing this issue.

Hi Sanket,
Thanks for reply.
i have created a dummy column and passed the value of the orginal column values to dummy cloumn. and hided the orginal column.
in this process i have come across same issue. it is not passing the value as parameter and instead of updating the row it is inserting an new row.
Any alternate for this scenario.
Thanks in advance.

How to make the OAF page Read-Only for one Responsibility?

I have a requirement to make the entire OAF page to Read-only for particular Responsibility.
Is there any direct option to make page Read-only ?
Can anyone suggest some solution?

Hi,
Check one article on
http://www.applikast.net/technical/oa-fwk/misc/making-an-oa-framework-page-readonly
or you can do Personalization for each item on page.
Thanks,
Abhi

How to set up 2 separate iPhoto libraries for two users

My wife and I have a macbook air, she being one user and me the other. We both have iphones and recently upgraded to the 5s. She had not ever openned itunes or iphoto on the computer as she used the it mainly for word processing, email and surfing the web. I, on the other hand, would play around in iphoto and ensure photo streaming was working and have a large itunes music collection.
When I openned up her iphoto, all my photos from my account downloaded into hers. I forget what I did to make this happen but it might have done so automatically.
My question is: how can I set up her own iphoto account when she is logged into her user account on the computer? We don't wish to share iphoto libraries as now is the case.
And, this might not be the correct forum to bring this up, but when I take pictures on my iphone 5s, they stream to her iphoto library as well as mine. But, her pictures taken on her iphone don't stream/backup to either of our computer iphoto libraries even though she has an icloud account and photo streaming turned on on her phone.
I hope this makes sense as there are really 2 questions: setting up a separate iphoto library for each user on one computer, and, how to get photo streaming from her phone to her library
Thanks in advance for any help

First you both have to have your own user accounts on the MBA and separate iCloud accounts. From there it's relatively simple to create you own libraries and have your respective iPhones link to those library when both devices are logged into the same iCloud account.
OT

How to set an screen variant as default for my user?

Hello,
For example in t-code FB50 we have 4 screen variants. The default screen variant is 1. How can I change the default sreen variant for my user only ?
Thanks,
Alexandre

Hi
Use T.code FB00 and in the document entry tab in screen templates and line layout variant for doc entry enter necassary details
For further details, the following link may be useful:
http://www.r3.duke.edu/stepbystep/journal/3.pdf
Regards
Aravind
Assign points if useful

How to set a customized search results template for all users

Hi.
I know the customized search results views are stored in a file called pne_portal.hda that resides on every user's subfolder in data/users/profiles/...
Is there a way to set a customized search results template for all users? If it's impossible, is there a way to modify the Headline view? I'm not able to find the resource or template where this view is.
Thanks in advance.

I wasn't able to understand what was meant by this post. Therefore, I modified the standard template HeadLine View.
Columns for this template are defined in the include slim_search_result_table_header_setup (in std_page.htm).
Here is the modification of the code:
<$if customTemplateId and not (baseTemplateId like customTemplateId)$>
          <$columnsString = utGetValue("customlisttemplates/" & strLower(customTemplateId), "columns")$>
          
     <$else$>

          <$columnsString="dDocName,dDocTitle,dInDate,dDocAuthor"$>

          <$columnsString=columnsString&",xComment"$>
          
     <$endif$>

How to Block Account member in input reporting for some users?

Hi experts, i need to know if is possible to block input of values for some Users in the Account Dimension so that some users can input value in the report but other user cant do it.
I try to do this from "member access profile" but this option only allow you to define access right for one specifict parent o member.
I mean, is posible to asigned to Account Dimension a Propertie type "OWNER" like ENTITY?
For example: one user must to input value for the Account member "CASH", but other user dont, however i have to show the same input reporting for both users.
I hope understand the question, im sorry about my english
thank you in advance
Ignacio Vazquez

I would think you could do one of the following:
Either set account as a secured dimension. You would then define security profiles for all account groups and assign those to your users / teams as appropriate. Would take a while to setup initially, but if your users don't change that much it shouldn't be too difficult to manage once it's done.
Setup different input templates that only showed the accounts you wanted each group of users to see. Put the templates in different site folders and assign access to those sites as required. users would then only have access to open the template applicable to them. Would require that you basically make duplicate copies or your current template, modify and save to different site folders which could become a pain if the template requires changes (since you would now have to make the same change multiple times).
Setup a macro in the current template so that you need to enter a password to unlock the send commands for the respective accounts. I don't know if it can be setup to support multiple passwords - assuming it can, password 1 would unlock all accounts, password 2 would only unlock CASH accounts, password 3 would only unlock LIABILITY accounts, etc. You then distribute the passwords to the users as appropriate.
Hope that helps.

Outlook asking for username and password, but only for some users

Hello, I'm
in an Exchange Server 2013 client
environment, two CAS servers
and two Mailbox.
Some users are having trouble in Outlook 2007
and 2012, which is directly
requesting the user name and password, not all,
just some.
The Active Directory is ok,
DNS and also own Exchange
servers apparently do not see errors.
Has anyone here ever experienced this?
How can I solve this problem?
As this happens only to some users
and the vast majority have no problems, so
difficult to find the cause.
Thank you!
Ivanildo Teixeira Galvão

Hi Ivanildo,
From your description, only some users have an issue that Outlook prompts for username and password. In your case, I recommend you compare the normal and problematic Outlook settings. Here is the Outlook settings in my environment for your reference:
1. "Always prompt for logon credentials" isn't checked.
2. Logon network security using Negotiate Authentication.
3. "Connect to Microsoft Exchange using HTTP" is checked.
4. Use the NTLM Authentication when connecting to my proxy server for Exchange.
Hope this can be helpful to you.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

Making Marketing Calendar Read only for Trade Promotion

Hi,
We are trying to use Marketing Calendar in CRM 7.0 to view the trade promotions. But the client wants the Marketting Calendar to be read only view. The end users should not be able to drag the TPs to extend the date. Also they should not be able to create, copy or delete the TPs. These end users will be able to create TPs when going through the TP link.
Please advise how can I achieve this.
Regards
Kavitha

Hi Kavitha,
This feature in introduced in the new Integrated Marketing Calendar. See if you can use it.
http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/704e0c72-a7ed-2d10-c2bb-d4162cf5cbca
Best Regards,
Roshan

How to set environment variables in mac mavericks for all users

Can someone here tell me the file to set JAVA_HOME environment variable for all users?
Thanks!

nara999999,
the file in which to set the environment variable depends upon the login shell of each user. Presuming that every user has bash as his login shell, and that the environment variable will be needed only in interactive shells, then the file to edit will be /etc/bashrc; if the environment variable will also be needed in non-interactive shells, then /etc/profile should be edited instead (and this will also cover users with either sh or zsh as their login shell). If ksh is used as a login shell, then /etc/ksh.kshrc will need to be edited. If csh or tcsh is used as a login shell, then /etc/csh.login will need to be edited.

How to set up new enviroment variables permanently for all users?

Hi.
I downloadad Apache Tomcat, and need to set enviromental variables for all users.
I tryed setenv commad, but it is not found.
for example # JAVA_HOME="/opt/jre1.6.0" Solaris remembers this variable only for one session and I need for all users permanently.
Thanks.

Thank you.
This file contains a script. Is there difference in putting that line in beginning or end of the file?
#ident     "@(#)profile     1.19     01/03/13 SMI"     /* SVr4.0 1.3     */
# The profile that all logins get before using their own .profile.
trap "" 2 3
export LOGNAME PATH
if [ "$TERM" = "" ]
then
     if /bin/i386
     then
          TERM=sun-color
     else
          TERM=sun
     fi
     export TERM
fi
#     Login and -su shells get /etc/profile services.
#     -rsh is given its environment in its .profile.
case "$0" in
-sh | -ksh | -jsh | -bash)
     if [ ! -f .hushlogin ]
     then
          /usr/sbin/quota
          #     Allow the user to break the Message-Of-The-Day only.
          trap "trap '' 2" 2
          /bin/cat -s /etc/motd
          trap "" 2
          /bin/mail -E
          case $? in
          0)
               echo "You have new mail."
          2)
               echo "You have mail."
          esac
     fi
esac
umask 022
trap 2 3
# Intel Server Control - The following lines
# let the LRA daemon access the X server
if [ -f /usr/bin/X11/xhost -a -f //isc/lra ]
then
     ttyname=`tty`
     ttyname=`basename $ttyname`
     ttykind=`tty | egrep "console|vt"`
     whereami=`finger -s | grep $ttyname | cut -c61-`
     if [ "$whereami" = "" -a "$ttykind" = "" ]
     then
          CURDIS=$DISPLAY
          DISPLAY=unix:0.0
          export DISPLAY
          /usr/X/bin/xhost +unknown 2>/dev/null 1>/dev/null
          DISPLAY=$CURDIS
     fi
fi

Catalog items visible to everyone, purchaseable only for some users

Hello everybody
Me again trying to find a solution to the following problem:
We need to have some items in our catalog that are visible for every user but only purchaseable via shopping cart / SRM for some authorized users. I couldn't find any possibility in the customizing. So my attempt would be to add an additional attribute in CCM where I can put some kind of flag and then to construct an authorization check based on that flag and on a authorization profile. In case the authorization check fails, the catalog item may not be put in the shopping cart. Preferabily the shopping cart icon should be disabled for such items.
Did somebody out there already think about something similar or already implemented something like that?
It would also be a good basis for offering a publicly viewable, browseable catalog for "window shopping", because I also didn't find a way until now to publish the catalog as a standalone web application without shopping cart functionality.
What do you out there think about it?
Kind regards,
Renaud

Hi Christophe
Thanks a bunch for your great help! I could solved the problem and am now able to have some catalog items visible but only purchaseable for authorized users. This is what I've done:
1. Create a new authorization class (SU21)
2. Create a new authorization object within this class
3. Create a new authorization field within this object
Don't forget to save and quit the SU21 transaction and then reenter it (/nsu21) because only then you'll see your changes / additions... seems to be a "refresh-bug" in SU21.
4. Create a new role (PFCG) and an authorization profile containing the new authorization object. Assign the values needed.
5. Create a new attribute in CCM and assigned it to OCI cust_field5 (because this one is of type TEXT50)
6. Implemented some code in BAdI BBP_CATALOG_TRANSFER:
DATA: wa_et_sc_item_data TYPE BBP_PDS_SC_ITEM_D.
DATA: wa_catalog_content TYPE BBP_WS_OCI_ITEM_S.
DATA: lv_authorized       TYPE c.
DATA: lt_limtab           TYPE TABLE OF string.
DATA: wa_limtab(10)       TYPE C.
DATA: lv_message_v1       LIKE SY-MSGV1.
DATA: lv_message_v2       LIKE SY-MSGV2.
DATA: lv_message_v3       LIKE SY-MSGV3.
DATA: lv_message_v4       LIKE SY-MSGV4.
LOOP AT et_sc_item_data INTO wa_et_sc_item_data.
* Get corresponding line from transferred catalog data
READ TABLE catalog_content INTO wa_catalog_content
                             WITH KEY line = wa_et_sc_item_data-number_int
                             BINARY SEARCH.
IF sy-subrc = 0.
*   If field content for checking authority against is not empty...
    IF NOT wa_catalog_content-cust_field5 IS INITIAL.
*     Perform authority check
      AUTHORITY-CHECK OBJECT '<your auth.object here>'
                      ID     '<your auth.field here>'
                      FIELD wa_tab.
      IF sy-subrc <> 0.
        MOVE wa_catalog_content-cust_field5 TO lv_message_v1.
        MOVE wa_et_sc_item_data-ordered_prod TO lv_message_v2.
*       Eliminate leading zeroes from product number
        WHILE lv_message_v2+0(1) = '0'.
          SHIFT lv_message_v2.
        ENDWHILE.
*       Output message
        MESSAGE ID     'ZXXX'
                TYPE   'W'
                NUMBER '000'
                WITH   lv_message_v1
                       lv_message_v2.
*       Remove item from SC
        DELETE et_sc_item_data.
      ENDIF.
    ENDIF.
ENDIF.
ENDLOOP.
Interesting observation is, that when issueing the message with type = 'I' it does not condense the message text. With type = 'W' it does...
I also found out the reason, why the way via ET_SC_MESSAGES will not work: SAP <b>has hard coded</b> somewhere after the BAdI call the message id and message number... so no way to bypass this without a modification.
Kind regards,
Renaud

Reader x 10.1.3 doesn't show print dialog when printing, for some users on Terminal Server

We are running Windows Server 2003 with Terminal Services for approximately 10 remote users.
A few days ago, some users started to complain about not being able to print pdf documents to their printer. I discovered that the print dialog box doesn't open, so they can't even select another printer.
If reader is set to open in browser, it just crashes the browser, if it set to open in Reader itself, it does nothing, no dialog,
I've tried removing the printer and reinstalling. Since it works from the console without issues, I thought it may be permissions related, so I added users to administrators group, with no success.
They can print from Outlook, Word, etc....just not pdfs.
Can anyone help?
Printer HP MFP 3027 PCL 6

Can you please see if launching the Preferences window from within Adobe Reader standalone application works?

How to set a shared calendar 'read only' for SOME users in ML server

Similar Messages

Maybe you are looking for