How to set a signature field as 'Required' with selection of a Check Box

I have a set of 3 check boxes and would like to set a unique combination of pre-existing signature fields as 'required' for each respective check box.
Given Check Box names of Box1, Box2, Box3 and Signature Field names of Sig1, Sig2, Sig3, can someone provide example JavaScript for setting Sig1 and Sig3 as required upon a Mouse Up of Box 1?
Otherwise, can someone let me know if this might be more trouble than it's worth?
Thanks!

Sorry to keep you waiting Greenstead - and thank you for responding.
My need for this feature, however, has passed.
I do have another question or two, but will post as a separate thread.
Thanks again

Similar Messages

How to set Mandatory Choice field while Creating Custom Task using Sharepoint Designer 2007

Hi,
I am new to Sharepoint development.I dont know whether i am posting the question in Correct place.Kindly redirect me to the correct place if i am posting it in wrong place.
I created a custom task in Sharepoint Designer 2007 using
Collect Data from User
Action.
I created a field in the task form which is of choice type and
unchecked allow blank values
because i wanted that field to be a mandatory field.When i handled that task ,i was able to complete that task
without selecting that mandatory field.But, I was expecting not to allow me to complete the task without selecting that field. Kindly tell me how to set the choice field as mandatory.

Hi,
You are using SharePoint Designer 2007, so I moved the thread to the appropriate forum for MOSS 2007.
This is by design that
Workflow-generated form (for action Collect data from User) does not perform validation properly on drop-down choices, the workaround is to use JavaScript to perform the field validation.
This thread has the JavaScript code can help you:
http://social.msdn.microsoft.com/forums/en-US/sharepointworkflow/thread/0ad7fc3c-97a1-464e-ae89-c3133462dda8/
Xue-Mei Chang

How to set the data fields column wide at sqlplus

Dear Sir/Madam
I would like to know how to set the data fields column wide at sqlplus
Thanks
Francis

see
http://download.oracle.com/docs/cd/B19306_01/server.102/b14357/ch6.htm#sthref1131
and the FORMAT clause of the COLUMN command in
http://download.oracle.com/docs/cd/B19306_01/server.102/b14357/ch12013.htm#BACHCABF

How to add a new field in MM01, with say contaminent as a field?

How to add a new field in MM01, with say contaminent as a field? I process that i know is i has to go the user exit and check out the three user exits that are available for MM01 after that what i have to do please can any one help me out with the procedure to proceed?

Hai venkateshwar reddy ,
try with these user exits
MGA00001 Material Master (Industry): Checks and Enhancements
MGA00002 Material Master (Industry): Number Assignment
MGA00003 Material Master (Industry and Retail): Number Display
Refer these steps also
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/screen-exit-on-mm01-mm02-mm03-322717#

How to set user friendly URL in ApEx with OHS 11g ?

Hi,
How to set user friendly URL in ApEx with OHS 11g ?
I want change the link http://190.148.xxx.xxx:8080/pls/apex to something like http://xxx.com.
I dont want to use iFrame solution. Please suggest any other method to acheive the same.
Thanks & Regards,
Ranu

Hi all
Iam using apex 4.0 -oracle 11g with OHS on linux os
I need to change my apex url http://x.x.x.x:xxxx/apex to http://x.com
What are the settings i need to do.
If any one knows please share the solution with me
Thanks & In advance

How to set up an clasic TS-desktop with Windows 2012 (R2)?

Hi,
How to set up an clasic TS-desktop with Windows 2012 (R2)?
Witch Roles and Features do I need, RD Session Host, RD Connection Broker, RD Licensing?
/SaiTech

Hi,
Thank you for posting in Windows Server Forum.
Based on your description provided, I can understand that you want to setup RDS server 2012 R2 and want information how to achieve that. If misunderstood then please correct.
If yes, then there is different option related to setup. There are 2 option for configuring.
1. Role based or Feature based installation
2. Remote Desktop services installation
For normal RDS environment, you can use 2nd option and then perform Quick start Deployment where 3 roles can be installed RD Connection Broker, RD Session Host and RD Web access. After this you can also publish RemoteApp and can use.
You can refer following article for more information.
a) Remote Desktop Services (RDS) Quick Start Deployment for RemoteApp, Windows
Server 2012 Style
b) Step by Step Windows 2012 R2 Remote Desktop Services – Part 1
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?

I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?

Urvergessen wrote:
+You may have already done this, but do you have the first AirPort Express configured to "Allow this network to be extended"?+
Could not find that setting anywhere.
It's in AirPort Utility, AirPort panel, Wireless tab.
When I'm within the range of the base station I connect normally, but further away the connection drops despite the fact that the other Airport is very close and light is green. Interestingly, my PB Pro has signal almost everywhere in the house, but my iPhone and Mac Mini don't. Most likely just a hardware difference?
In AirPort Utility with the second Express, in the AirPort panel, Wireless tab, have you checked "Allow wireless clients"?
The second AP does show an IP address: 10.0.1.3.
With a "Configure IPv4" setting of "Using DHCP", that suggests that the second Express really is connecting to the first Express. In that case I have no other explanation of your your problem.

How to set color space to JPEG image with Java advance Imaging

How to set color space to JPEG image with Java advance Imaging.
is there any API in JAI which support to set color space.

I'm definately no guru, but this is how you can change it.
CTRL + ALT + Click on the part of the component that you want to change. This brings up the Hidden Dom Inspector, background of component will be surrounded with a red outline (Make sure the red outline is surrounding the part of the tabset you want to change), Now you go to properties sheet and click the ellipses next to rules property this will pop up a dialog you look in this list (At the top) to see the default style classes that are affecting the rendering of the component outlined in red. (You will be able to select different sections of a single component) then you just rewrite the style class that you want to change in your Stylesheet (You will not find the styleclass that you want to change because it is a part of your theme .jar but as long as you name it exactly the same and place in your stylesheet it will override the theme .jar style classes) it's actually very easy -- you were right should be a piece of cake for a guru. Don't have the link handy but you can check out Winston's Blog on changing Table Formatting to get this information...It is EXTREMELY useful if you want your apps to have a custom look and not default that comes with Creator Themes.
Hope this helps you out God knows others have helped me alot!
Jason

How to set ApplIndentityData header field in JMS adapter

Hi Guys ,
    I have one requirement for update the field in SAP JMS header. I am using transport protocol for IBM Websphere MQ in JMS adapter.
While sending data to IBM Websphere MQ Queue via JMS Adapter, need to set the field called ApplIndentityData with the appropriate value which is populate to a MQHRF2 header of a message.
So, regarding that where will do it? Means JMS receiver adapter or IBM MQ level. If JMS receiver adapter, I think using ASMA, So please guide me how to set this filed value in JMS adapter or share any document you have.
Thanks & regards
Vijaykumar S

Hi RejaSekar,
       I reffered your blog and did the below settings in JMS module and ASMA settings.
1) Changed the mode for u201CJMS-Complaintu201D instead of u201CWebsphere MQ(non JMS)u201D
2) Additional JMS message properties tab created below property name and java type.
       LocalName    --> String
       Partname      --> String
3) In module parameter tab added the below module name and key
    AF_Modules/DynamicConfigurationBean   --> LocalEnterpriseBean --> RFH2HEADER
4) Under parameter Tab
     RFH2HEADER       -->   key.0      -->     insert http://sap.com/XI/System/JMS DCJMSMessageProperty0
     RFH2HEADER       -->   key.1      -->     insert http://sap.com/XI/System/JMS DCJMSMessageProperty0
     RFH2HEADER      --> value.0    -->    LocalName
     RFH2HEADER      --> value.1    -->    PartnerName
Kindly check the above settings whether this is correct or wrong. If anything wrong please let me know what we need to change JMS receiver adapter.
Actually my requirement is need to set these parameters and set the value to that parameters and pass in to /usr folder of a WebsphereMQ message.
Kindly check and help me out.
Thanks & regards
Vijayakumar S

Setting up the signature field to work with Entrust

Good afternoon everyone,
Im looking into signautres today and i would like to get a complete walkthrough as to what i need to setup under the signature fields when i press the "settings" button.
Right now there's a bunch of tabs that are available but i hhave no idea what information is required under each one in order to have the Entrust key work with them
My goal is, right now, is to just setup the signature field so that it uses Entrust certificate info of the user trying to sign my form. I have no idea how to get this started
I found my Entrust digiture signature file, i think its got the following extension: .p7c but that dont seem to be enuff to get me going.
When i press into the signature field, i want to populate this one automatically based on the user's entrust cerficate info, Help!!!!!
If you need more details, i will gladly add it to the post. I just really want this to work
Thank you so very much,
Patric

each of your employees will require their own pfx/p12c/entrust key. if you use unverified certs (ie. you created them yourself or they are not from a trusted CA) then when another user opens up that file on another machine, they may find the sig is unverified since they cant' verify the sig.
when they click on the sig field, it'll bring up a dialog box to select the key and require them to enter the pwd.
After that, i think reader remembers and it'll show the last sig file used in the drop down by default. The user will only need to enter in their pwd.
When they save the file their sig will be embedded into the form.
You may need LC ReaderExtension to extend your form so ppl can save and can add digital sigs with Adobe Reader. Otherwise, they would all require Acrobat.

How to get all signature fields in a .pdf from C#

Does anyone have some sample code that shows how to "iterate" all signatures in a .pdf from C#? Using the SDK and the Javascipt object model I know how to sign a document but I can't figure out how to "get all the signatures". Basically I want to open a .pdf file and then (from C#) find out what persons currently have signed the document. I guess I need to iterate all signature fields and then get the SignatureInfo object, or?
Anyone?
Cheers,
Calle

I am afraid this don't help me. How do I get the "data" back to C#? Looping all fields in in JavaScript is probably "easy" but I simply can't figure out how to get access to the data from C#. Any one have a suggestion on the best approach?
Thx,
CJ

How Can I stop signature fields disappearing on my IPAD Adobe Reader 11

Hi, I am using trial version of Adobe Acrobat XI pro. I have converted a Word document to PDF. I have added text fields, Java scripts to automatically add Todays date as default, Form Reset buttons and Signature fields. File is saved as standard save. All of the above is done in Windows 7 environment. On same computer, In Adobe Reader signature fields are visible although I do not have the means to test it. When the same File is emailed and opened on an IPAD using Adobe Reader 11.2, the signature fields are missing. I intend to have my users access the file (and 30 others like this) on an IPAD. Can someone advise how to resolve the missing signature field issue. It appears that Adobe do not help with such issues as it is not considered an installation issue.

Digital signatures are not supported on mobile versions of Adobe Reader. Other PDF viewers like Readdle's PDF Expert treat them like e-signature fields, allowing the user to draw/apply their drawn signature, but this is not the same as a digital signature. Adobe Reader for iOS allows you to add an e-signature, but it doesn't use digital signature fields for this feature. Instead, you tap the screen, choose the annotations icon, and then the signature icon.

HOW TO SET A RAW FIELD

Hi,
I'd like to know how I can set a RAW field with the correspondent '10' value (for '10' i mean the byte value of '00000101').
Is there a manner to do this at low level, without cast ?
Thanks and best regards,
Neil

The string 00000101 generally represents the binary value of 5 so I am unsure of exactly what you want but maybe the following will help:
UT1 > set echo on
UT1 > col dumped format a30
UT1 > drop table example;
Table dropped.
UT1 > create table example (fld1 varchar2(10), fld2 raw(02));
Table created.
UT1 > insert into example values ('Row 1',hextoraw('05'));
1 row created.
UT1 > insert into example values ('Row 2',hextoraw('0A'));
1 row created.
UT1 > select fld1, fld2, dump(fld2,16) as dumped from example;
FLD1 FLD2 DUMPED
Row 1 05 Typ=23 Len=1: 5
Row 2 0A Typ=23 Len=1: a
Being that on a big endian machine the 8 bits of a byte are 0 - 7 numbered left to right and on a little endian machine the bits are 0 - 7 right to left this may be where the confusion in your post is coming from. On my system the Oracle functions appear to follow big endian set and display patterns but I suspect that the physical byte settings match. You would need to test this by dumping the raw data on the target platform. The only difference this makes is the character value you would choose to get the bit pattern you want.
The dbms_raw package provides varchar2 to raw and back conversion functions.
HTH -- Mark D Powell --

How to set a payload field value only once for multiple instances selected?

The user needs to set a payload field value and then he can approve the task so the task can continue through the process, that's fine when the user selects one instance and sets the value in the task details section and then clicks the approve button, but how do we achieve the same behavior in a multiple way?, I mean the user can select multiple tasks in the workspace (in this case the details task page is not available and instead the following label appear "Multiple tasks selected") then if the user clicks the Actions drop down -> APPROVE he only gets the message "your request was processed successfully", so how can the user modify the payload field value only once for all the selected tasks so when he clicks APPROVE the value is populated in all the instances selected.
Thanks,
Carlos.

In the action which displays the edit page just set the form idx value before displaying the jsp.

How to set the expires field to stop caching of pages

I want to set the expires fields of the HTML data on pages delivered by weblogic, so caching servers(ie ISA) and clients dont cache the my pages. How do I do this?
Thanks for any help

I guess that's the NI Domain (NI Security Login) user name. Check out Tools->Security->Login in LV main menu.

How to set a signature field as 'Required' with selection of a Check Box

Similar Messages

Maybe you are looking for