How to set ACLs on Remote MAC server Volumes..

Hi,
I have Mac OS X server v 10.5 Leopard. Initially I have enabled the ACLs using fsaclctl on the MAC server volume. When this volume gets mounted(through afp) on some other MAC client(MAC OS X 10.4 Tiger), the ACL status is shown as disabled. And it not allowing to set the ACLs on the remote volume from the client side.
I have used the following command to enable ACLs from Client.
sudo fsaclctl -p /Volumes/<server Volume> -e
This failed as "not supported".
Anyone knows how to set the ACLs on the remote MAC server volumes? Basically I want to see ACL working on Remote MAC server volumes.

Hi
+". . . remote MAC server volumes . . ."+
Are you saying you are trying to enable ACLs on volumes shared by another OSX Server when volumes are mounted on the server in question?
Or are saying you can't see if ACLs on mounted volumes when issuing ls -lae for example?
You might want to read:
http://discussions.apple.com/thread.jspa?messageID=648307&#648307
http://discussions.apple.com/thread.jspa?messageID=1535247
and
http://discussions.apple.com/message.jspa?messageID=8456140#8456140
http://discussions.apple.com/message.jspa?messageID=8340573#8340573
http://discussions.apple.com/message.jspa?messageID=7777878#7777878
Tony

Similar Messages

How to set the IP and MAC address in C program?

My working environment is Sun250 Server, Solaris 7 operating system. I encountered a problem ---- How to set the IP and MAC address in C program to make the system change it IP & MAC at runtime?
Any idea is welcome! Thanks!

Hi
As a simplest possible solution, you can use the system command
to run ifconfig that can set both the mac address and the IP address of the system. You will have to use setuid though.
Or you can use the DLPI calls ( do a man DLPI or search for a
Sun documentation on the same at http://soldc.sun.com) to write
a pure C program.
HTH
Shridhar

How to set up SAPconnect with email server

Hi,
Does any one know <b>how to set up SAPconnect with email server</b>
We are using workflow and when it fails it we are sending the notification mail to the user on his company mail id, i.e. [email protected]
This is working in the current production system. We are doing the new development which will replace the current production system. The existing Basis team does not know how it was setup in production system and how to set it up in the new system.
When we send any mail notification from workflow we can see the mail in SCOT transaction but it is not received at the specified mail address.
Can any one provide the configuration steps or any document for this.
Thanks in advance..
Pratik

Hi Pratik,
Check the following link:-
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
http://help.sap.com/saphelp_nw04/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
these link will help u to config SMTP.
And one more thing u have to do..
Go to SE11 n open Table sxnodes in change mode.
And change F_ESMTP field to false i.e. BLANK for the Field NODE = SMTP.
Hope this will work For U.
Regards
Sachin Dhingra

How do set operation timeout in tomcat server?

hi all
suppose i have one endless loop program(jsp) that program run under tomcat server,
so it's keep on runing in tomcat server.
i want, after some time the server send error message like operation timeout.
how do set operation timeout in tomcat server?
if anybody know help me.
my mail id [email protected]

Well, the server.xml file has connection time outs, but that is for idle time, I think... I'm not sure what would happen in a loop... , especially if you are sending some data back to the client in each iteration. Generally you shouldn't be starting a loop that will really run forever. Maybe have some type of counter to break out if something hasn't occurred within x iterations, or create a separate thread that can sleep for x seconds and set a flag to break the loop after that time.

How to set share folder for mac 8.6 in windows

I know how to set share folder for mac 8.6 in windows xp. I installed the NetBIOS. But i still can not found windows share file in mac 8.6. Need to install 'DAVE'?

I want to setup file sharing. Then, I will setup share printer for mac8.6. I tried to config File Sharing control panel. But it do not scuccessful. Do have you way to solve file sharing and share printer problem. Not use NetPresenz.
I follow the website to setup file sharing. But I is not successful.
the website:
http://homepage.mac.com/car1son/os9xnet_nfilesharing.html
I go to appletalk control panel to connect via choose ethernet bulit-in. It appear a error. The error is 'An error occurred attempted to use Ethernet bulit-in. Make sure your network connection are correct.'
Thank you very much for your help.

How to set up the "incoming Mail server" for google apss account

how to set up the "incoming Mail server" for google apss account

The settings are not generic for all webmail accounts, only your office IT department would know what the server address is for their outgoing email server. You'll have to ask them about it.

Setting disk quota on Mac server for Active Directory users

I'm having trouble setting disk quotas for Active Directory users with home folders on our Mac server.
I've enabled disk quotas on the disk I'm putting home folders on, and I can set disk quotas for local users on the server just fine. But it doesn't seem to work for Active Directory users. I've tried setting disk quotas via Workgroup Manager and via the command line using edquota. But when I use the repquota command there is no quota entry for the AD user. I've run quotacheck and that didn't help either.
I also understand there's a setquota command but there's no man page on how that works.
Has anyone got disk quota for AD users working.
Better still has someone got a shell or perl script for setting quotas they could post.
Thanks
- Cameron

sorry.. I am soooooo stupid... I have to activate "File Sharing" as well.. for the user everything was already pre-activated, not for the AD users, I just saw the Time Machine checkbox grayed out ...

How much attached storage can a mac server handle? What would be the best suggestion for this?

Hello, hopefully I am in the correct location, if not, i apologize. Please bear with me as I am fairly new to MAC server. Here is my dillema. I have a mac graphics group that uses about 6TB of storage currently on a Windows server. We are running into issues such as permissions and searching inability. I was considering moving them to a mac server but will need to add storage to this. What would be recommended for such large disk space? We do currenlty have 2 mac mini servers and all the users are bound to AD as well. Thank you in advance for any suggestions!

One of the Mac Mini Server boxes I deal with has 24 TB hanging off of the box (configured as RAID-6), plus a two-disk RAID-1 mirror set inside the box. That's also a pretty small configuration, both in terms of its physical size and in terms of its storage capacity in the grand scheme of things.
A Mac Pro or Mac Pro Server will do 8 TB inside the box, plus a whole lot more outside the box either direct-attached storage (DAS) or via a Storage Area Network (SAN) configuration, but the performance of a Mac Pro Server is probably overkill for your needs, too.
As much as you are focusing on the capacity, you'll also want to look at how you'll archive and manage that much storage. At how you'll manage and conduct backups of your data.
You'll also be looking at the speed and the design of your network, if you're moving large files around regularly. Gigabit Ethernet does pretty well for small groups, but you may be looking for a different setup of that's not fast enough.

How to set the CLASSPATH in Unix Server

Hi, everyone~
Do anyone noe how to set the CLASSPATH in the hp-ux server? I tried the setenv CLASSPATH, but not working.. I think should use export. But my jsp pages still cannot working, dunnoe y?
I wonder is the hp-ux support jsp and servlet or not?
In order to let the jsp and servlet to run properly in the unix server, what kinds of steps should taken ?
Hope somemore who experience with this situation b4 can give me some guidance.. Thanks~~
regards,
tzeyik

Tomcat ignores any and all CLASSPATH environment variables. Even if you could figure out how to set it, Tomcat wouldn't use it.
Better to learn how Tomcat's CLASSPATH works and how to deploy Web apps properly. - MOD

We are planning to have a Mac Server, how windows PC can connect to Mac server?

We are planning to move to MAC operating systems, will use one of the mac as server. What is the possibility for Windows PCs to have access to Mac server?

How to connect a Mac Server with a PC:
http://www.ehow.com/how_5869849_connect-mac-server-pc.html
http://smallbusiness.chron.com/connect-mac-server-pc-60008.html

How to Set "delete from hub and server" for each account

How can I set "delete from hub and server" differently for each account?
I have 3 emails (2 shared, 1 personal).
the personal is a 'hotmail' account which has device set to 'sync email', 'push', and 'Use SSL'.
it will only sync one way (from desktop to device).
I cannot set the global setting on the device to "delete from Hub and server" without affecting all accounts.
I do not want to have to confirm delete on every item.
previous to the 10.3 update this was not an issue.
am i missing something? or is this another step backwards?

The only other way would be to set it to prompt every time you get an email. Yeah, I know that defeats the purpose.. I guess in this aspect it is a step back

How to install Iperf in a MAC server

I need to installed Iperf in our Mac server but I do not how to do it or where find the software,
All I have found in the internet is windows base Iperf,
We are trying to use the MAC mini server for IT work and network testing and is not easy for someone like us with no so much knowledge .
Any subjection please

/Users/riveradf/Downloads/iperf-3.0.3/examples/mic.c:8:10: fatal error:
'iperf_api.h' file not found
What means this?

How to Set CLASSPATH in Apache Web Server Using IAS

Hi,
I have problem setting the classpath for the servlet I am using for file uploading...My work environment is Web Server is Apache with Oracle8i IAS on Sun Solaris..
I have tried various method like setting wrapper.classpath=/oracle/ias/Apache/Jserv/servlets and my class resides under /oracle/ias/Apache/Jserv/servlets/com/oreilly/servlets/MultipartRequest.class
in the Jserv.properties, still it get the error message class ...not found in type declaration when I compile the code...my reference to the servlet in my JSP code is com.oreilly.servlet.MultipartRequest ..
Can someone help me out please, if you have have any idea of how to set the class path with the working environment I have specified ealier....
null

have you posted this on the ias 9i forum where the ias 9i apache experts are at ??

How to set the priority for Commit Server?

Hi all,
I want to know how to set up the priority for committing documents.
I'm having two different odc applications and i want to commit documents belongs to one application (URGENT) as soon as it has complete the indexing. (I'm running commit server every second for this (URGENT) application).
But once the commit server start to commit batches belongs to one application it continues until finishes, and then only it switch to the URGENT application even though indexed documents are there.I have tested with batch priority, Batch status fields in commit server.
What is exactly happen in setting batch priority ?
How do i switch commit serve to run urgent batches (which is belongs to another application) as soon as indexed??
I can use ODC or ODDC.
Thank You.....

Don't worry - I'm more think aloud, so it is more a hypothesis than a solution.
You write that
We are using ODC to Index the documentsWhat exactly does this mean? If it means that a user types in metadata values, then you could take a look whether those metadata are needed for the item to be checked in (like the mentioned security group), or whether it is "other" metadata (e.g. supplier, invoice number, etc.) that you could, in theory, fill in in your application in IPM - imagine that you use IPM to check in the document and all you have is a TIFF.
Btw. you also write that
(we) use Input agent to sent documents to IPMI thought that ODC (Commit Profile) does this work for you, or not? If you use ODC to commit to a disk, and Input agent to get it from a disk to IPM, how about using a direct commit profile to IPM?

How to set up "find my mac"

Hello,
I have an iMac with OS X 10.8.4, and I try to activate "find my mac" option but it says: Recovery partition required >> Some configuration, such as a software or hardware RAID, do not support a recovery partition and can't be used with Find My Mac.
Can anyone tell me step by step how to set up this partition?, then I can activate the Find My Mac option.
Thank you in advance!
signos

I recommend you post your question as "How to restore recovery partition" (or something similar) over in the OS X Mountain Lion forum: https://discussions.apple.com/community/mac_os/os_x_mountain_lion. I believe all you have to do is reinstall Mountain Lion on top of your current installation but they would have more expertise on this.

How to set ACLs on Remote MAC server Volumes..

Similar Messages

Maybe you are looking for