How to set APSE 3.2 to save original?

Hi all
I have just replaced Kodak easy share with APSE 3.2 and am very happy with the change except that saving files is a real pain.
I edit about 40 pictures a day and I want to be able to press the save button and have the photograph I was editing saved rather than saving to a new file.
If this is not possible then can anyone recommend an alternative sofware package that will do this.
It is a very major issue for me.
Many thanks in advance for any replies.
James

Thank you so much.
I use gimp on windows which is absolutely super for image editing but there is no catalogue. I use this for banner and backgrounds for web sites.
I used Kodak Easyshare for eBay listing photos as it came with my camera and it had it's good points but a lot of really bad points not least of which was my P.C. re-booting every time I removed the camera from the printer docking station.
The editing was clear and sharp and the albums were good though.
I tried Picassa before I tried PSE and just did not get on with it.
I really like what I have seen so far with PSE apart from the saving option plus the actual editing process is not as intuitive as Easyshare but I'm getting used to it.
I might look into the paid for bit that does what I need but that would mean I would expect more from the actual editing process. For example full screen photos rather than small pics when editing.
Than you for the reply.
James

Similar Messages

  • I can't figure out how to set the history to only save 2 days. Is there a way. Thank you

    I have tried to figure out how to set my history to only save 2 days. I am sure that in previous version of firefox that this option was available where as in this one I don't see that. So I am either blind that I can't find it in the history option or it doesn't exist. It seems the options are remember history no limit or always to remove when closed. I want the options of setting how many days not the other two. Is there a way to do that? Thank you.

    No need to crop your clips. The mask does the cropping of the upper clip.
    To use the image mask, you need an image to place into the drop zone in the inspector. In your case you'd want a simple black to white gradient as the image mask and choose Luminance in the Image Mask source luminance pop-up. I'm attaching a sample gradient. The original was 1280x720 to match a 720p movie but the forum shrinks it down. This gradient was created in Photoshop in less than 30 seconds.
    You import this gradient file into your event. Click on the Mask Source in the Image Mask effect and then click on the gradient file in your event list and click Apply Clip. Change the Mask Source to Luminance. Change the offset mask parameters to move where the gradient lines up in your movie.

  • How to set up Adobe Printer to save .pdf in folder

    Good morning.
    I am looking for guidance on how one can set up a virtual "adobe" printer that saves a print job as a .pdf in a specific shared folder.
    Example:
    1. External application creates a print job
    2. Print job goes to a pre-named, virtual printer.
    3. The virtual printer accepts the print job
    4. The print job is turned into a .pdf document and the document is saved in a shared folder.
    Additionally, can the naming convention of the saved folders be "dynamic"?  In this scenario, a print job named "ABC123" is saved as "ABC123.PDF" and another print job named "XXX900" is saved as "XXX900.pdf", etc.
    Appreciate the help.
    medina

    Yes.
    Ideally it would be installed on the application server where the job is generated and sent to the specified printer (internal settings). Then when the job hits the printer it drops a .pdf in a shared folder.
    Appreciate the help.

  • How to set default file path for save

    Hello all,
    I'm currently blocked on the below issue and is hoping to gain your help and insights.
    We have recently upgraded to InDesign CS6. Now when an INDD file created in an older version of INDD is opened in CS6, all the save dialogs would not default to the location of the original INDD file. Though if the same file is opened in the version of InDesign that created it, the save dialog goes to the proper location by default.
    Debugged using our custom plugin as a gate way, and found out that after InDesign CS6 performed the document upgrade/convert, the database for the converted document loses file information. i.e.  IDataBase::GetSysFile() returns nil. I think we can figure out some way to get the original file path. For example, we can intercept "kAfterOpenDocSignalResponderService", and get the original file path of the opened file from IDocumentSignalData. Though I haven't yet able to figure out a safe way to set this file path to the document, so that the save dialogs would by default point at this path.
    Utils<Facade::IWorkgroupFacade>()->InitDocumentAssetManagement(docRef, filePath) seems to do the right thing, but it seems to be quite intruding, and I'm afraid that it is overkilling and will cause bad side effect for the use case I'm looking for.
    So I'm wondering if anyone has any suggestions to achieve this without implementing/overriding the file save dialog.
    Thanks.
    -Jeff

    You should be able to avoid writing your own open-doc trap by using kDocBoss's IOpenedFileInfo to obtain the original file's path. It seems fairly reliable; the only time I've seen it come up empty is for an opened QuarkXPress document.
    I'm afraid I don't know of a sanctioned way to change IDataBase::GetSysFile() without going through the database's SaveAs machinery. Overriding this behavior might only be possible by replacing the regular Save dialog with your own.
    But if InitDocumentAssetManagement() is helping, maybe the workgroup/asset management approach is worth pursuing. Have you tried spying on that call in the debug app? You might be able to isolate and use one of the commands that it's invoking (IAMSPManager::BindAsset() / kSetAssetAttributesCmdBoss?) without all of the side-effects of the higher-level call.

  • How to set one fixed folder to save rich content of rich text field in sharepoint list

    hi friends
    i have rich test filed in SharePoint list
    if user wants add picture to rich text filed from insert option it is asking to save file in existing document libraries it is showing all libraries. 
    what i need is how can we fix one particular document library to save all this file from rich text filed.

    To my best knowledge, the only basic way to input picture in SharePoint Rich Text Editor (RTE) can be finished in two steps. One, upload it to you computer and then insert it URL to RTE. This works fine if I insert few of them.
    Use SharePoint Rich Text Boost, which can let user insert images and Flash directly.
    http://www.boostsolutions.com/richtextboost.html
    If this helped you resolve your issue, please mark it Answered

  • How to set IE property to automatically SAVE AS?

    In my JSP page, I want to set IE property to automatically trigger OPEN - SAVE AS - CANCEL message box.
    Because I am trying to open a ralitively big file (15M), but it takes too much time for the client browser to show the file, about 20 minutes.
    Any other good idea will be appreciated as well.
    Thanks

    you'd need to include a header in the response:
    response.setHeader("Content-Disposition", "attachment; filename=\"the file name\"");

  • How to set progress bar forecolor to its original forecolor?

    I set the progressbar forecolor to red but i dont know how to bring it back to its original(JFrame.setDefaultLookAndFeelDecorated(true)) color. i tried to use null but the forecolor turns to black.
    pb.setForeground(Color.red);

    Try using the getForeground() method before you change the color to see what color it is.

  • How to set and save Custom Print Settings in Aperture?

    How to set and save Custom Print Settings in Aperture
    Hi,
    I am printing 12x18" images on 13x19" sheets. I find it difficult to enter the 13x19" dimensions because each value jumps to another random value when I move to enter the second dimension. For instance 13 jumps to, say, 8.5 as I type 19 into the second box. Same with the sheet dimensions.
    Also, when I finally get it all correctly, the margins don't set themselves automatically - which I would I expect.
    Then, even though I save the setting by clicking Save Setting at the gear below, next time I turn Aperture on, it's all gone.
    Any ideas? Thanks.
    Raphael

    For me, it is working with these settings, Raphael.
    Does your image have a 12x18" aspect ratio? You may want to crop it to the desired aspect ratio before printing.
    I can only test with Aperture 3.6 on Yosemite 10.1.

  • How do you get firefox 4 to save tabs and windows and restore them? Don't say set preferences to open them on startup or use restore previous session under history; those do not work. Or is it no longer possible to save windows and tabs?

    Question
    How do you get firefox 4 to save tabs and windows and restore them? Don't say set preferences to open them on startup or use restore previous session under history; those do not work. Or is it no longer possible to save windows and tabs?

    '''IT'S A EASY AS IT SHOULD BE.'''
    This is essentially paulbruster's answer, but I've added the steps some might assume, but which aren't so obvious to those of us who are new at this, like me.
    This solution might ''appear'' to be long and complicated, but after you follow the directions once, you'll find it's quick, clean, and simple. Almost like they designed it this way.
    # If you haven't already, open a bunch of tabs on a few different subjects.
    # Click the List All Tabs button on the right side of the tab strip.
    # Select Tab Groups.
    # Create a few groups as described [http://support.mozilla.com/en-US/kb/what-are-tab-groups#w_how-do-i-create-a-tab-group here] , i.e. just drag them out of the main thumbnail group into the new groups they create.
    # Now click on any thumbnail in any new group, but not the original big default group you may have left some tabs in.
    #A regular Firefox window will open, but'' only the tabs in that group will be visible.'' You also now have the Tab Groups button in the tab strip.
    # Right click on any tab, and there it is: Bookmark All Tabs. Click on it in the list of options. Or you can hit Ctrl+Shift+D instead and go straight to the dialogue box from the tab without any clicks. But don't go looking for this familiar option anywhere else, 'cause it's not there.
    # Now pick an existing folder or create a new one just like you would have before and '''shlpam!''' there they are. New folders are supposed to end up in the Unsorted category all the way at the very bottom, but for some reason mine show up at the bottom of my last sorted category.
    # DO NOT CLICK THE UPPER-RIGHTMOST X to close this group of tabs. This will close ALL of your tabs in all groups, currently visible or not. At least it asks if you're sure first. Instead, click your new Tab Groups button to return to the Boxes 'O Thumbnails window, and click the X in the group box you just bookmarked.
    # Click on another thumbnail to repeat the process with another group, or click on a thumbnail in the big default box to return to the original FF window. You can also click the Tab Groups button at the upper right, or Ctrl+Shift+E, which will also get you ''into'' the Boxes 'O Nails window ''from'' FF.
    # So now when you reopen FF after shutdown, simply select your folder from your Bookmarks and Open All in Tabs. '''Just like paulbruster said. '''

  • Once and for all: How to set up and use SSH

    Yes, I know ssh has been discussed on and off, but never in its entirety; and yes, there are step by step instructions on the www, but at one point or another they skip a crucial instruction that would be necessary for unix-dummies (e.g. how to save and close the nano-editor in Terminal). So, please pardon my question:
    There are several points I'd like to ask for ssh-connecting two macs on a local network:
    1) In terminal-file-"connect to server" you can ask for an ssh connection to be set up. For this to work, do I need to create private and public keys first? If so, how? Please point me to a reliable and step-by-step instruction site.
    There are some free ssh-utilities out there, but their documentation is just not helpful enough for a UNIX-dummy.
    2) Apparently I managed to connect via ssh once (from the terminal, see point 1) to a local server (allowing remote connection set to ON at the server). But then, when I connected to that server from the client's finder and tried to get into my user account on that server it told me that no secure connection could be established. What's wrong here? Do I have to continue working from within the terminal to use this connection? That would be difficult for an average MacUser.
    3) What is the security advantage of an SSH connection on a local wireless network (Airport Base Station) over WPA2, if at all?
    4) And how to set up an ssh-connection over the internet cloud to safely build a remote control/desktop sharing connection, e.g., a friend's Mac when she has a problem?
    Thanks for your consideration.

    First I'm not sure what your goals are.
    1) In terminal-file-"connect to server" you can ask for an ssh connection to be set up. For this to work, do I need to create private and public keys first?
    If you have ssh keys, you can do this without passwords. If you have not exchanged keys with the remote system, you will be asked for the password of the user you are attempting to login as.
    If so, how? Please point me to a reliable and step-by-step instruction site. There are some free ssh-utilities out there, but their documentation is just not helpful enough for a UNIX-dummy.
    Log into the remote system. This could be via ssh.
    On the remote system, run the following command to generate an ssh key for that remote system:
    ssh-keygen -t rsa
    Generating public/private rsa key pair.
    Enter file in which to save the key (/Users/username/.ssh/id_rsa): <<take default>>
    Created directory '/Users/username/.ssh'.
    Enter passphrase (empty for no passphrase): <<enter nothing>>
    Enter same passphrase again: <<enter nothing again>>
    Your identification has been saved in /Users/username/.ssh/id_rsa.
    Your public key has been saved in /Users/username/.ssh/id_rsa.pub.
    The key fingerprint is:
    aa:bb:cc:dd:ee:ff:gg:hh:ii:jj:kk:ll:mm:nn:oo:pp [email protected]
    This will generate an ssh key for the remote system. This could be any system that support ssh, such as a Unix system, or another Mac.
    Copy the id_rsa.pub file from the remote system to your Mac. When I say "your Mac" I mean the one that you want to make the ssh connection from. The id_rsa.pub is found in the remote system's ~username/.ssh/ directory.
    Append the copied id_rsa.pub to your Mac's ~himbear/.ssh/authorized_keys2 file
    cat id_rsa.pub >>~himbear/.ssh/authorized_keys2
    Now when you ssh to that specific remote system, it will NOT ask for a password. The first time you ssh to any system, ssh will ask if the system is really the system you thing it is. But once you say "yes", it will not ask that question again.
    Repeat for every remote system you wish to log into using an ssh key.
    2) Apparently I managed to connect via ssh once (from the terminal, see point 1) to a local server (allowing remote connection set to ON at the server). But then, when I connected to that server from the client's finder and tried to get into my user account on that server it told me that no secure connection could be established. What's wrong here? Do I have to continue working from within the terminal to use this connection? That would be difficult for an average MacUser.
    MacUser. A flash from the past, as in the MacUser magazine.
    ssh is not used by default when you make connections. If you want an ssh connection, you have to establish it intentionally.
    ssh can be used to pre-establish a tunnel (or tunnels) that other services can use. Once an ssh tunnel is establish, connections to local host's tunnel port will be connected to the specified remote port. For example:
    ssh -L 5901:localhost:5900 [email protected]
    will establish a tunnel that VNC can use. The VNC client would connect to localhost display 1 or port 5901.
    ssh allows multiple -L tunnels to be specified on the ssh command line.
    3) What is the security advantage of an SSH connection on a local wireless network (Airport Base Station) over WPA2, if at all?
    Inside you home. Not much. Unless of course you do not trust the other members of your family. That is to say, others having your WPA2 password, and are thus on the inside, and can sniff you packets.
    4) And how to set up an ssh-connection over the internet cloud to safely build a remote control/desktop sharing connection, e.g., a friend's Mac when she has a problem?
    If you are using the Mac OS X Leopard built-in *Screen Sharing* and you are connecting to another Mac's built-in Leopard System Preferences -> Sharing -> Remote Management (Tiger's Apple Remote Desktop), then in the *Screen Sharing* preferences, is an "Encrypt all network data" option.
    If you wish to set this option in advance, you can launch *Screen Sharing* by double clicking on System -> Library -> CoreServices -> Screen Sharing.app
    You can *Screen Sharing* connections over the net using iChat. This is one of the easiest ways to take control of their system. Of course they need to cooperate. I use a Free AOL Instant Messager (AIM) account for my iChat connections. And as a side benefit you can text, audio chat and/or video chat with the person at the other end.
    If you are NOT using the build-in Mac OS X *Screen Sharing* and/or you are NOT using the build-in remote Mac OS X remote management server, then this is a situation where an ssh tunnel would be a very good idea.
    However, setting up an ssh tunnel between 2 systems across the internet gets complex.
    In this case you might want to consider using something like LogMeIn.com which will deal with all those nasty home routers without needing to to do nasty router configurations, and it will be a secure connection. LogMeIn.com will not be as fast as a *Screen Sharing* connection or a VNC connection, but it will be secure and easy to establish. Again, this is only if you can not to Mac to Mac *Screen Sharing* using built-in Mac OS X remote desktop.
    Now if you want to roll your own ssh tunnels for VNC, then I'm just going to outline the things you need to do.
    If the remote system is behind a home router, you need to configure that remote home router to "Port Forward" port 22 on the Internet side to port 22 on the target Mac. Bonus points if the internet side using a high number port to discourge net bots from knocking on your door. Use the ssh -p 12345 option to connect to the high numbered port that is forwarded to port 22 of the destination Mac.
    On the remote Mac you need to run a VNC server. If this is a Mac, then Leopard System Preferences -> Sharing -> Remote Management (Tiger's Apple Remote Desktop). If it is not a Mac, then for Windows, TightVNC, UltraVNC, RealVNC are possible options. Linux has a built-in vncserver, or you can install x11vnc which has the advantage of displaying the desktop screen.
    Once you can access the remote system, you use an ssh command like the following:
    ssh -p 12345 -L 5901:localhost:5900 remote.system.address
    You can get the remote system's address by having the remote system surf over to http://whatismyip.com. Then they can tell you the IP address.
    If you are going to be doing this a lot, you can get a free no-ip.com or dyndns.org dynamic DNS name for the remote system, and the remote system can run a dynamic DNS client (available from no-ip.com or dyndns.org) which will keep the dynamic DNS name updated as the remote person's ISP change's their IP address.
    Finally, now that you have an ssh tunnel for VNC traffic, you have your VNC client connect to
    Address: localhost
    Port: 5901
    Depending on your VNC client you may need to specify Display 1 instead of Port 5901. Or if you do not get a Display or Port option you specify localhost:5901

  • How to set up user account and share folders

    We are a family of four sharing our first iMac. I would like to set up one account for my wife and I and one account for my kids on which I plan to enable Parental Controls.
    I have struggled with setting up my kids user account. After setting up a Standard account for the kids - I noticed none of our music or files were visible in the kids accounts. I spent 20 min on the phone with Apple and the tech was clueless. He had me copying my music folder all over the computer until I had about 6 copies of the same folder. I did figure out how to move the music library to SHARED folder and redirect iTunes source folder to the same shared folder.
    My problem now - when I copy my documents to the SHARED folder my kids can see the files and open them, but they can not save them. How do I give the kids account read write privileges?
    Should I set up a GROUP account instead?
    I need the best way to have two or three users who can access all data on the same iMac, while giving me the ability to enable Parental Controls on the accounts.

    Do this:
    Here's how to set it up by using ACLs:
    1. Create a new folder in /Users/Shared. Call it "Sharefolder".
    2. Log in to an Admin account, open Terminal and paste in all of this at the same time:
    chmod -R +a "everyone allow delete,chown,list,search,add_file,\
    addsubdirectory,delete_child,file_inherit,directoryinherit" \
    /Users/Shared/Sharefolder
    That will automatically make everything copied or created to the sharefolder writable by all users. Note: After setting this up, if you have existing files that you want to move to the sharefolder, hold down the option key when dragging them in. That will make new copies of them in the sharefolder. Dragging existing files in (i.e. simply moving them there) won't cause the ACL to inherit properly and they won't be writable by all users. Files that are copied or +newly created+ in the sharefolder shouldn't have this problem.
    Make sure you keep good backups. One user accidentally deleting a shared file will affect everybody else who uses it.

  • How to set up and auto-mirror a networked drive?

    So here's the situation.  I currently have a MBP Retina 15 (max spec'd), and there are some design processes that still run a little slow for my liking.  Given that I spend about half my working life at a desk plugged into a monitor anyway, I figured I'd get a Mac Pro to use when I'm in the office.
    What I need help with is how to:
    -Set up an external networked drive so that I can open and save all my projects to the same place regardless of which machine I'm working on.  I spend 90% of my laptop working time at home on the same network.
    -Have the networked drive auto-back up to another external storage device so that in case of HD failure.  Basically I want to save a file, and have it expeditiously (ideally instantly, but the sooner the better) back up to the secondary HD. 
    Somebody at the Apple Store suggested using a USB HD plugged into Airport Extreme, and that would work, I suppose, but
    1) I'd really prefer something plugged in to the Mac Pro to speed up the data transfer at least one one machine.
    2) There's only 1 USB port on the Airport Extreme.  So if we were to go this way, the back up mechanism would need to be built in to the drive -- some sort of double external HD that auto-mirrors.
    Any suggestions?

    Could you use textarea?
    sym.$('inputfiled').html('<textarea cols="20" rows="3"></textarea>);
    actually the form I used in the file is:
    inputMessage = $('<textarea />').attr({'type':'textarea','rows':'10', 'cols': '25','value':'', 'id':'message'});

  • How to set pixels for smoothest -outline, in a design? I am using PhspCS5 TRIAL Grateful for help!

    First, I am not an advanced digital artist rather know (just)basic tools and am quite good with those over the years however, have a new Mac and better
    visibility for sure and have a TRIAL version of PSHP CS5 Extended; what I am asking is: how to set the pixels...to acheive the smoothest outline eg. I
    designs for greeting cards and now working on a Xmas tree, with gold stars, they look best outlined (vy-light=blk) but when I ZOOM IN I see the 'wavy lines
    of the pixels, that are set on 'square'.  I wish to know how to set the pixels* #1 and then as far as colours, when I pick a yellow (there are many!yellows !!)
    and use my Intuos pen, 'tap tap tap' on the designs (yellow of the star) it does NOT register ....(it did on my other computer and older CS4).  So going
    back, to my colour swatches, to ...remember just which yellow I picked...ha ha....can be: "not so fast!"  
    I will be buying this on Subscription at the end of the trial and my bet is that the colour picker/will work on the purchased version when I 'tap tap' to pick up the
    same colour II had chosen.  Wouldn't it be good to have a monitor of sorts that tells you, what colour(s)one has been using, when you NEED to know, to go
    on with the 'design' say after a break for tea etc.  ?????  (    :
    I save my designs when done JPEGs, and see now there is a JPEG 2000...I have no idea what that is all about.  I save (1)pdf and one jpeg.  Hope this sounds
    like what  one 'does' ...when one knows far more than I do.
    And lastly,  what program or tool, can one use to put a 'frame' (border) around a eg: 5 x 7 design (again, my goal is for my designs for Greeting Cards.  Is there
    another Adobe products I should have for that.  Free hand hasn't worked out so well, so far.
    I am in advance, so grateful to you - whomever you may be, for your help.  I am on my last 'hoorah' path now hoping for success soon....I am a senior of 71 yrs
    and so feel I need to really 'get going' and learn these basics to assure my chances of success, at least. Merci, Danke & Thank You ! CDW

    Please post in the Photoshop forum.
    http://forums.adobe.com/community/photoshop
    Bob

  • How to set-up my home intranet using 2 different ISP's ?

    I have had so much trouble recently with my main (8 years now!) internet provider "ABC" (not the real name) Cable Modem here in Belgium that I made the decision to pay another bunch each month to have a second ISP for my home and home office. "XYZ" (also not the real name) will start on Monday 26 July. It is a DSL line, linked to my TV and fixed telephone. Great, except I'm not really sure how to set-up this 2nd ISP.
    First, I want this 2nd ISP to (at least for now) be an emergency backup. So if ABC shuts down again (as it has done a lot recently, but no technician can come until 30 July- poor service there!) - I want to immediately be able to use the XYZ server.
    OK the XYZ has a kinda built-in router in that the DSL Modem has built-in WiFi and also 2 cable to computer out ports. I believe I can first just configure the WiFi: Apparently I have to attach my MBP-13" via cable in order to change / add a security code; maybe change the name of the WiFi from its default "XYZ-WiFi" (not the real name) to something I want like SteveXYZ and then add a security protection code.
    But how to configure my eMail using MAIL? And can I still keep getting my eMail from my main "[email protected]" (not the real address) even when connected via XYZ? And what about SENDING from ABC when connected via the server XYZ?
    Also: I currently have my ABC Modem going to a 4-port D-Link DI604 Router. From there, one cable goes to my MacBook Pro-13"; one to the Apple LaserWriter 12/640PS (great printer- 13 years old and still super); one to my Canon MP640 and one upstairs to another router: D-Link DIR-635 wired and wireless. From there, one cable goes to my wife's eMac; and another is available for guests; another unused and then the WiFi for when I compute in the garden and of course for my iTouch.
    So now let's say that on 28 July the ABC is down. Ideally I'd like to pull the cable from the ABC Modem that goes into the DI604 Router and plug-in a cable going to the XYZ DSL Modem and voilà have internet back via my backup XYZ. BUT can I print? Do I have to reboot the Router since it will have to reassign those 192.168.0.123 type numbers, won't it? (I believe those numbers are called the "IP Addresses").
    Thanks for any comments or references here.
    Best regards,
    Steve Schulte
    Wednesday 21 July 2010

    In your Network Preferences you can set up more than one method of connecting - i.e., Airport, Ethernet, Dial-up (heaven forbid). If, for example, you place Ethernet at the top of the list, then Airport, your Mac will try to connect to Ethernet first. If it can't, it will fall back to Airport.
    So if you can have Airport connected to one ISP and Ethernet connected to another, you will be able to pick one or the other by imply pulling the Ethernet cord. What you can't do is set up two Ethernet connections (or Airport connections) each with a different ISP (though if I read you aright this isn't what you want anyway).
    Another method is to set up 'Locations'. You could set up one with Airport only, and one with Ethernet only, and switch between them using Apple Menu>Locations: this would save you physically pulling cables and is just as quick, it takes only a few seconds.
    As to mail, it depends on your ISP. Some ISPs demand that you are connected directly to them to send mail, and possibly also to receive mail: some rely entirely on the password. In the latter case you can use the same settings in both locations or methods: in the former you can't get round that - if you're not connected you can't send/receive as relevant.

  • I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either.

    I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either. I have an iphone 4 that will not connect to 5ghz.
    thank you!

    Your AirPort Express is already providing two separate 2.4 GHz and 5 GHz bands, but each band is using the same wireless network name.
    This is the default setup for the AirPort Express, which is recommended for most users. The theory here is that devices will automatically connect to the best quality signal based on their capabilities and distance in relation to the AirPort Express.
    It is possible to assign a different name to the 5 GHz band, and then "point" devices at that network to connect. Some users swear by this option.....(I am not one of them).... but you might want to give it a try to see how it works for you.
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the AirPort Express
    Click Edit in the smaller window that appears
    Click the Wireless tab at the top of the next window
    Click Wireless Options near the bottom of the next window
    Enter a check mark next to 5 GHz Name.....which will automatically add "5 GHz" to the network name....so you can identify it
    Click Save, then click Update and wait a full minute for the Express to restart
    Now you will need to "point" your 5 GHz capable devices at the 5 GHz network name.  2.4 GHz devices will connect to your "other" network name.

Maybe you are looking for