How to Set Automatic to turn on and off at specified time my TV with STB

It seems very frustrating talking with Verizon tech support, that's why I turn to you guys to find if anyone knows the answer to my question above.,from my experience calling verizon for my tech support regarding fiosTV and most of my experience from Verizon are either inept and giving the customer the run around by keeping you on hold for the longest and not having the answer after all the time I spend with the tech on the phone or they will tell you that the that there is no such thing; and when you call again when you get another tech on the phone you get completely different answer if not an inept answer. 
My Specific question is, if  I turned off my STB (top box) and my TV at a particular time; and I like my TV with STB to turn on at a specified time ( example I turned off my STB and TV at 9:00 PM ) and would like my TV with the STB to be turn on like 11:00 PM to turn off at 12:00 midnight by itself, not to record  but just to turn on as reminder and to serve as power saver incase I fall asleep ( this is just example scenario). How would I do that? The manual of either remote control or the STB does not provide that information. My television manual say the TV can but I can not turn it on automatically with the STB connected.
I called Verizon tech, he first sounded inept and sounded like he just talking from a scripted lines, and would not tell me straight forward that he does not know the answer; I  explained that I switched to Verizon Fios for its claim in high and advance technology as they compare themselves by far higher in technology as compared with Cable or direct TV, and with Cable Vision I was able to used the above automatic turn on and off with the remote; I asked for his supervisor or maybe more expert tech support, He turned over the call to his supervisor, who told me that the STB or the remote Fios TV does not have that level of capability which sounded to me like a joke, he also told me that the STB can not be turn on and off because STB is always set as on; I told him I can see the green light turns on and off on the STB each time I press the ON button on the Verizon Remote; he defended that its always on because the timer is ON, and he told me instead FIOSTV has another feature that although it will not turn the feature on and off automatically, it will serve as reminder, I asked him How to carry out that function, the tech supervisor said  to me to just press the record button on my remote, which I know right away that it will just record, and  I told him that its not what I want to accomplish, this Tech Supervisor insisted that it will not record but will set to notify me, but surely it did record and it just wasted and used my DVR memory capacity the time when he put me on hold for a long period of time, I knew it recorded because the red button on the STB/TVR was on., and it did not notify me in anyway what time the TV and STB will turn on. That was a complete  waste of time, instead of him getting the issue to higher level of their tech support and try to research thru and get back to the client. To me, simple feature as this, is such absurd to claim that fiosTV has more advance features than others, where infact they can not even have their tech support answer such simple question.  
Any one here has any idea, please help.

The set top box does not offer any auto on or auto off feature. 
you can only do that if your TV offers the feature. 
If neither your TV nor the STB offer that feature (in this case the stb does not offer) then you can go to a radio shack or a similiar store and purchase a AC timer.  they make them and you plug them into your wall, they are very cheap.
I have had directv and fios and neither of my systems did an automatic on or off. 
BUT my samsung TV upstairs does have that feature (auto on and off)   and I have not checked my mitsubishi downstairs. 
so you may want to check your settings on your TV to see if it will do it, like my samsung does. 

Similar Messages

  • IOS6 and iphoto, iPad, Apple TV sync problem still unresolved. Turning on and off a few times have not helped. What should I do now? wait for an upgrade fix?

    iOS6 and iphoto, iPad, Apple TV sync problem still unresolved. Turning on and off a few times per community advice have not helped. What should I do now? wait for an upgrade fix?
    "&" is not the obvious bug/answer. Not sure what went wrong as I cannot select albums and events for sync. Situation is worse for iPad and Apple TV when error 1140 message popped up even before backup get completed.

    Download and install the iPhoto 9.4.1 update, which was just released today. It may be the answer to your problems:
    http://support.apple.com/kb/DL1598
    Be sure that neither iTunes nor iPhoto is running when you install the iPhoto 9.4.1 update. After installing the update, then restart iTunes and iPhoto. By default, "All photos" is selected. Change this (it's no longer grayed out) to "Selected albums..." and you should be OK.

  • Ipod mini keeps turning on  and off all the time. Help

    I got this ipod mini in may, it worked great, but then all of a sudden it started to turn on and off once in a while mostly now it happens once a day..i checked if maybe the timer was set but it wasnt at all, can i fix it by myself or do i have to send it back to the factory for the warranty repair.

    the same thing is happening to my ipod mini, I received a brand new mini in July, and every time I use it it shuts on and off whenever I touch it, even with a fully charged battery, and it also shows the battery sign, do i need to get it serviced?

  • Can iPod be set to automatically turn on and off at certain times?

    At my work, I have been using my iPod to play overhead music through the PA system - using the radio feature mostly, but sometimes a playlist. However, I have to remember to turn it on and off everyday, which doesn't always work out too well. Is there a feature that can be set so that it will turn itself on automatcially each day and turn off automatically each day? Its the Nano, sixth generation. Any feedback is appreciated!

    You can set a time in the clock but that wouldn't be much of an improvement because you would have to do it every day.

  • Ipod Nano 3rd generation keeps turning on and off

    I have a brand new Ipod nano. I updated the software on the ipod and my itunes. I then put songs on my ipod. After that, i ejected my ipod using the button on itunes and also by disconnecting with the windows icon in the lower left hand corner.
    The ipod went to the main menu and appeared to be working. I then plugged it back in to my computer to download something else. Itunes then told me that it did not recognize my ipod and that i would have to restore to factorty settings. So i hit the link to restore to the ipod to factory settings. The ipod restarted and then itunes said that it was corrupted and needed to be restarted. Meanwhile my ipod began turning on and off, only displaying the black screen with the apple in the middle and then turning off, then turning back on and displaying the apple again.
    Currently, I'm waiting for the battery to completely die, so that i can see if that will fix it. If anyone has heard of this problem and knows the solution, it would be appreciated. Happy Holidays.

    All,
    I had the same issue on my new Ipod Nano. It works now! I did the following:
    1) Called Apple. Apple told me the next steps.
    2) Toggle the Hold switch 6 to 8 times. I did 10
    3) Press the center button and the PLAY button! Hold for ten seconds
    4) A check mark appears!
    5) Connect to computer and restore your Ipod!
    6) Thank me later!
    SW

  • External HD keeps turning on and off after Leopard install

    Since I've installed Leopard, my external HD seems to keep turning on and off at random times (i.e. the disk starts spinning for a little while, then stops, then starts again) when I'm not doing anything to access the HD. Any ideas if this is an issue with Leopard or something wrong with my HD? It wasn't an issue before Leopard.

    Glad to know that I'm not the only one and that I'm not going crazy!
    At least in my situation, TM has never been turned on. It might be Spotlight, but my guess is that after being installed for several days now, that most anything needing to be indexed would have been indexed. No virus checkers installed. Also, my external HD is only for backup (not saving stuff or autosaving stuff on the external HD).
    I've noticed it a bit more when using Safari, but that may be purely a coincidence. The solution I've basically used has been to eject my HD and then re-mount it when I need to use it.
    If anyone knows of anything, please let us know!

  • Although I turned off WiFi, set as 'require admin password to turn on and off wifi, when I turn on my MacBook Pro, retina latest model, just got for a month, it turns on wifi automatically, is this a back door or virus or security hole? Thank you

    I have my all networks at 'Off' status in the system panel, never use Bluetooth either, also in the top status bar, and set as 'require admin password to turn on and off WiFi', but when I turn on my MacBookPro 15" retina newest model only one month old, it goes on to WiFi automatically by itself.
    Is this a back door? Security hole?
    The other day, I was taking a break for five minutes, when I came back, the Microsoft outlook is open for setting up an account, I never use outlook, it is there only because it comes with the office package. Also, iTunes was playing music, I don't use iTunes when I'm working. Both were not on before I left for the break.
    What is the problem?

    I have my all networks at 'Off' status in the system panel, never use Bluetooth either, also in the top status bar, and set as 'require admin password to turn on and off WiFi', but when I turn on my MacBookPro 15" retina newest model only one month old, it goes on to WiFi automatically by itself.
    Is this a back door? Security hole?
    The other day, I was taking a break for five minutes, when I came back, the Microsoft outlook is open for setting up an account, I never use outlook, it is there only because it comes with the office package. Also, iTunes was playing music, I don't use iTunes when I'm working. Both were not on before I left for the break.
    What is the problem?

  • My backlit keyboard will not go off automaticaly i have the box checked but it still doesn't turn on and off. i am having to do it using the f5 and f6 keys. anyone know how to make it work automatically in low light?

    i am having a problem with my back lit keyboard on my 13in mac book pro. i have the box checked in the keyboard setting for auto so the keyboard should turn on and off in low light conditions but it doesnt. anyone know how i can getit to work properly?

    I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

  • How do i save Proxy setting, if i turn the pc off and on, they vanish

    How do i save Proxy setting, if i turn the pc off and on, they vanish
    I want them to be permanent until, i turn off the Proxy settings

    See:
    *http://kb.mozillazine.org/Preferences_not_saved
    *https://support.mozilla.com/kb/Preferences+are+not+saved
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • How can I automatically have the XRAID turn on and off at a specific time?

    Hi Everyone,
    I was wondering if anyone can help me figure out how to turn on and off the XRAID at a specific time. My electrical bills are crazy. Is there a way to get this done?
    Thanks,
    Jorge

    Hi Everyone,
    I was wondering if anyone can help me figure out how
    to turn on and off the XRAID at a specific time. My
    electrical bills are crazy. Is there a way to get
    this done?
    Thanks,
    Jorge
    I think turning the RAID on and off periodically is a bad idea. But if you really really really want to do this ....
    Connect the xserve raid to a 'metered power strip such as those provide by APC. you can telnet to the power strip via the network to power off individual port)
    write a script (run on the xserve or powermac that the RAID is connected to (direct or via switch)
    0) quit application (issue a quit command or if the application have a stop command (example databse can be stopped)
    1) unmount volume (must)
    2) issue a telnet command via expect script to control the power strip to power off the array.
    If you have java cli access to the array (see alienraid.org).(I have not tried this before.)
    http://alienraid.org/article.php?story=xserveraidtools12&query=command
    You can issue a command to execute the RAID admin shutdown command.
    Put the master script into a unix cron job.
    macbook pro   Mac OS X (10.4.7)   typing this on a white box pc

  • How to use a slider to turn on and off lights

    Hi guys. i am fairly familiar with Labview now but cant seen to get my head around this problem. i have a slider which is numbered from 1 to 10. below the slider i inserted 10 LED lights. my aim sis to use the slider to turn on and off the lights. for an exmaple, when i set the slider to one, the light on the far left should go on. when i set the slider to 2, the first light should go on and the second light next to it should go on, and the pattern continues. i thought of using the number to array boolean but it didnt seem to do the trick. could you please help me out. i have attached the basic layout of how i wanted the objects to be arranged
    kind regards
    joe
    Solved!
    Go to Solution.
    Attachments:
    led control.vi ‏7 KB

    wow! simplicity at its best! thats really straight forward to understand. i think you are right about making complicated circuits. the reason why i had asked to know how to do this was because i wanted to learn how to control motor directions using a slider. so after i thought i had got the easiest way of giving out 2 different outputs using a slider, i replaced the lights with switches that changed the direction of the motor. i successfully did this for the first motor and it rotated fairly well, but wanted to control 4 in total. so i simply copied and pasted the code and re-asigned the switches to different motors. when i did this, the results did work BUT the motors went very very slow. the movement was not steady and kept skipping. i think this its due to the coding being overly complicated thefore causing a serious lag. if you could please have a look
    kind regards
    joe
    Attachments:
    controling test.vi ‏29 KB

  • HT204368 After I updated my iphone 4 to ios 6.1.3 I can no longer connect to my bluetooth plantronics model M25.  I tried reset all settings after turning on and off also submitted diagnostic.  Do I have to buy yet another bluetooth set?

    After I updated my iphone 4 to ios 6.1.3 I can no longer connect to my bluetooth, plantronics model M25.  I tried reset all settings after turning on and off also submitted diagnostic.  Do I have to buy yet another bluetooth set?

    Thank you wjsten for your soon reply. Unfortunately on these days I'm in a country that Apple don't have any retail store here and for sake of time I prefer to fix it myself to DHL it to the nearest country to use its warranty. Do you have any idea how can I fix it? Do you think it's a software issue?

  • How to set border lines in table and also in template in the smartforms ?

    How to set border lines in table and also in template in the smartforms ?
    As I have to create table with following detals
    total row = 3
    row1 = 3 column
    row2 = 6 column
    row3 = 9 column
    for 2nd and 3rd row data to be fetched using coding.
    so can anybody explain me what should i use
    Table or Template ?
    and I want the border like excel format.
    Can anybody suggest me ?
    Thanks
    naresh

    if the data is multiple i.e. line items choose table.
    if the data is single i.e. fixed choose template.
    Create table
    >  Draw u r no lines
    > choose option select pattern
    > select display framed patterns
    Choose u r required one.
    out lined, or full lined. u can choose option.
    same procedure to be followed for template also.
    with regards,
    Kiran.G

  • My iphone 5 does not turn on anymore.  when i plug the charger in the apple icon turns on and off but the home screen never shows up.what do i do to fix it? how can i get my info back?

    My iphone 5 does not turn on anymore.  when i plug the charger in the apple icon turns on and off but the home screen never shows up.what do i do to fix it? how can i get my info back?

    from the information you provided i can't tell if it is a hardware problem or a software problem. I do have an idea though, try to press your home button and lock button at the same time.

  • How to set my favorite tv chanels and view schedule on internet?

    How to set my favorite tv chanels and view schedule on internet?

    That's a good question - I've been trying since fios came out with fios tv central to view the tv guide online. It keeps saying "invalid user name/password". I've changed them numerous times, contacted online help, talked to phone help (who's also baffled), all to no avail. I actually saw the guide once when I first visited the site, so it exists. Please let me know if you figure out how to get on there because setting the favorites has to be a breeze compared to that.

Maybe you are looking for

  • FIOS - IMG 1.9 - Activate eSata drive - Can't connect to server

    Just got updated to the new guide here in the Los Angeles area! Trying to activate an external drive. Says it's trying to activate, and then it says "Unable to connect to the server. Please try again later." Anyone experience this? I've got a 7232, n

  • Installing trial on Windows 7

    I have read a number of accounts (through a general google search in trying to resolve my issue myself) of people being able to install Photoshop CS4 on Windows 7 with no problems, but I don't seem to be in this lucky number. I have the Trial Install

  • 11g R1 database installation is successful on windows 7 64-bit

    Hi all, During installtion I got error Check complete. The overall result of this check is: Failed <<<< Problem: Oracle Database 11g is not certified on the current operating system. Recommendation: Make sure you are installing the software on the co

  • Apple ipad2 Wi-fi connection failure. Unable to join the network. How can I connect?

    1month before i connected my apple iPad 2 with that router but now I couldn't. My router network has password but I tried to write it slowly also. My other devices easily connect with that. But through this I couldn't. Help..

  • Can't pull off the antenna.

    Hi! I've just bought an AirPort Extreme Card for my iMacG5 and tried to install it...but couldn't physically pull off antenna off the gray plastic base. I tried turning it to the right and left, but it didn't help me out. Seems like I need a knack or