How to set background and other elements for each page of gallery?

I guys, I used th DW/FW Web Photo Gallery tool to make this gallery: http://12bar.co.nz/Gallery/index.htm then edited index.htm to make the page look a bit more attractive. However, when you click on any of the images you just get the ugly white background and black text.
Is there a way to make each photo page black background and insert navigational graphics without having to open and edit each one individually?
Thanks in advance for advice.
Jo

Why not try using something like Lightbox. When you click on the thumbnail... this uses jquery, but it's very simple to set up:
http://www.lokeshdhakar.com/projects/lightbox2/
and there is this one: Pretty Photo with a few more options:
http://www.no-margin-for-errors.com/projects/prettyPhoto-jquery-lightbox-clone/
and lots more options for photo galleries, slideshows here:
http://www.1stwebdesigner.com/resources/57-free-image-gallery-slideshow-and-ligh tbox-solutions/
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
http://csstemplates.com.au/
http://twitter.com/nadiap

Similar Messages

How to set upper and lower limit for service notification in SPRO

Hello everyone,
Good morning....!!
I am new to SAP PM and to SCN as well.
I have a question on Service notification user status.
I have notification profile configured in SAP as below:
Status no      Status          Short text              Lower limit          Upper limit
5                  REGD          Registered                1                          70
10                PCKS            Pack sent                  1                          70
20                APRC            Application received 1                        70
etc..
I want the statusesto be set as navigation should only allow to go back one by one...like from APRC -->PCKS not to REGD.From PCKS -->REGD etc..not vice versa.
Can enayone explain me to how to set lower and upper limits for these according ot the above requirement.
for more details please check my attachment.
Thanks in advance..!!
Regards,
Sudha.

Once you change the status to previous status, just save the order. Then again open the order & try to change the user status.
Just I made replica of your profile. I could able to change (even without saving the order).

How to set background as white colour for Bitmap images in sapscripts?

Hi,
Can anyone let me know that How to set background as white colour for Bitmap images in sapscripts?Actually,I am getting grey as background as defualt for my Bitmap images.
Sorry,in my previous question,I posted viceversa.I am mistaken.
Thanks,
Balaji

Hi,
The problem can be solved by changing the way you save the original image.
Take a look at this thread which explains;
Problem with logo
Regards,
Nick

Is it Possible to set Top and Bottom Margin for each section?

I've been googling and haven't found an answer to this problem.
I need to specify a different top and bottom margin for each section in my document. The "document margins" apply to the whole document, so I've set those to a low amount, and I can set the Layout Left and right margins - but the "Layout Margins" do not allow "top and bottom" only "before and after". This is a critical difference, because if you have 2 pages in a section, only the first page gets the "before" margin, and only the 2nd page gets the "after" margin. This is a little odd, and I'm frankly surprised we are in version 4 of this app - and you can't set top and bottom margins for each section.
If you insert a "layout break" on each page, then you can get the margins to reset for each page inside a section, but this is not an acceptable workaround as I need to setup templates for staff to use that will "flow" like a normal word processor.
Does any one have any suggestions?

On page 49 in the English Guide version it tells you about Lay-out margins. This is the text
*Defining Layout Margins*
*In a word processing document, a layout margin is the space around columns in a*
layout.
*To change the layout margin in a word processing document:*
*1 Click in a column.*
*2 Click Inspector in the toolbar, click the Layout button, and then click Layout.*
*3 To change the outside margins of the column(s), enter values in the Left and Right*
*fields under Layout Margins.*
*4 To specify the amount of space above and below the column(s), enter values in the*
*Before and After fields under Layout Margins.*
*The new margins can’t extend outside the page margins set for the document in the*
*Document inspector.*
I hope this helps.

How to set the parameter selection *optional* for each subreport?

Hi,
I am using Crystal Reprots 11.
I create 10 subreports, and each subreport contains a Parameters Field.
The 10 subreports are put in 10 footer sections in increasing order, i.e. subreport1, subreport2, subreport3, ..., subreport10.
When I use "Print Preview" to take a look at the whole report, CR prompts a "Edit Values" window for selecting parameter values for all 10 subreports.
For example, if I only select parameter values for subreport1 and click "OK", 9 error messages on the "Edit Values" window come out above the selection list box of every other subreports (i.e. subreport2 ~ subreport10) showing that: 'The value is not valid'.
Sometimes, I just want to review some specific subreports but not all.
How should I do to set the parameter selection optional (not mandatory) for each subreport?
Thank you in adavance.
Edited by: Holdup on Feb 17, 2012 3:44 PM

Hi,
Here's how you can make the prompts optional (Assuming you're using CR 2008 or higher):
1) Go into each subreport
2) You should see the parameter in the Field Explorer. Right-click the name and select Edit > Look for an option called 'Optional Prompt'. Set it to true
3) If you have a record selection in the subreport, then you need to modify the selection formula to something like this:
if not(hasvalue({?Parameter_Name})) then True else = {?Parameter_Name}
Hope this helps!
-Abhilash

I am not able to set high and low limits for each channel seperately using LabWindows/CVI

I am using AI_StartAcquisition and AI_ReadAcquisition functions to acquire data using PCI 6025E DAQ card and iam using Lab/Wuindows/CVi5.0 software. But one of my transducer has its range in +/- 500 mV soi need to set the high low limits of each channel seperately for that i am using commond string function(cmd) but still i am not able to set the limits properly. Does anyone has any idea about this trouble

You can set the gain on a per channel basis by using the lower level functions. (As opposed to the easy i/o functions.) For example, look at the "SCANsingleBufSync.C" NI-DAQ shipping example that uses the SCAN_Op() function. It's gain parameter is an array of gains that will allow you to change the input limits for each channel separately.
-Russell

How to set SMB and FTP sharing for different users?

In Tiger FTP and SMB sharing was different options with their own settings each other. In Leopard there if i enable user for sharing, it enables for all protocols together.
Another problem. In file sharing i can add shared folder, but what's sens of it, if the whole filesystem is shared (at least FTP and AFP, not SMB, thanks god) and there's no way to remove this share. Just shortcut? How can i create ftp sharing, allowing user to see only his folder, not the whole filesystem?
Any advices are pleased, except to get Leopard Server Thank you.

OS X Client FTP implementation is not comprehensive at all. Apple does not make FTP serving a priority for OS X (on the general principle that it is not really necessary for most consumers). Thus, by default you can't enable/disable FTP for individual users. Nor can you create FTP only users.
However, a useful product called [Pure-FTPd|http://www.pureftpd.org/project/pure-ftpd], provides the missing functionality for free to all UNIX based systems. Even better, [PureFTPd Manager|http://jeanmatthieu.free.fr/pureftpd> provides a GUI on OS X for managing it.
This product is probably overkill for a single-user situation - but it is a great example of leveraging the UNIX platform of OS X to significantly enhance file sharing capabilities to server level.
Cheers,
Rodney

How to set NTFS and share permissions for Users share for home directories in Server 2012

I have a new Server 2012 server, and I want to set up a Users share, that will contain subfolders of each user's username and contain their home directory. But what do I set the share and NTFS permissions as on the root level, lets call the folder
Users? Is the following older article the correct permissions I need?
https://support.microsoft.com/kb/274443

Hi RJO22,
You can choose configure the Folder Redirection, Folder Redirection enables you to redirect the location of specific folders within user profiles to a new location, such as
a shared network location. Folder redirection is used in the process of administering user profiles and roaming user profiles. You can configure Folder Redirection using the Group Policy Management Console to redirect specific user profile folders, as well
as edit Folder Redirection policy settings.
The related KB:
Folder Redirection Overview
http://technet.microsoft.com/en-us/library/cc732275.aspx
Specify the Location of Folders in a User Profile
http://technet.microsoft.com/en-us/library/cc771969.aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to set Menu and Title functionality for a remote control in a menu?

I have a main menu (countries) and under each country there is a submenu (regions). When I play my DVD on my Mac it seems to function alright:
If I go to country C and hit the "menu" button, nothing happens (I see the "action prohibited" line popping up). And nothing should happen of you hit menu in a submenu. Only if you hit Title/Top menu you should be able to go to the main menu.
However... When I play my DVD on a DVD player (and I tested it on 2 different ones) and I go to a the Country C and hit the "menu" button, I am suddenly transfered to Country A. And if I go from the main menu to Country D and I hit the "menu" button, I go to... Country A. The menu button seems to be linked to the first submenu. Which is very odd!
So there is definately something going very wrong when using the menu/title buttons during playback when I am in a submenu (not while playing a track).
Can someone help me? Is there a way to define what happens with the remote control buttons menu or title when you are in a submenu and NOT playing a track? I can not find any controls for that.
Thanks!

Does this mean I should select "not set" in the general tab at the dropdown menu's for Title, Menu and Return in the Remote Control section? I can't find any other place where I can select menu or title.
But if I set these to "not set",the menu and title buttons still work in simulation mode... So I guess I should do something else in order to disable menu and title? Sorry for the amount of questions from my side!

How to download iphoto and other software for other macs from the liscensed version from a new mac

I purchased a macbook pro in Dec 2011 and was told I could download software from app store (ilife, OSX, etc) for up to two other macs based on the software liscense agreement. Can anybody tell me where to find instructions on how to do this? Thanks. TJW

You need to have accepted the iLife suit into your Mac App Store account from the Mac App Store app on your new Mac. Then you should be able to open the Mac App Store on the other Macs with at least Mac OS X Snow Leopard 10.6.6 and download the apps after signing into your account.
There is not a two Mac limit. You are able to download your Mac App Store apps on every Mac that you own or have in your control, which would include Macs issued to you by your emplyer or an educational institution.

How to set background color for selected days in DateChooser

How to set background color for selected days. I created
checkbox for each day [Son,Mon,Tue,Wed,Thu,Fri,Sat] and a
DateChooser, I want to change the background color for the selected
day when i click on a button after selecting the desired checkboxs
[ monthly wise/yearly wise]
Thanks in advance

There is no button involved in the following code, but it may
be of use to you:
<?xml version="1.0"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
creationComplete="init()">
<mx:Script>
<![CDATA[
private var origColor:uint;
private function init():void {
origColor = dc.getStyle("selectionColor");
public function setBackGrdColors(newColor:uint):void {
dc.setStyle("selectionColor", origColor);
if(dc.selectedDate){
var dayOfWeek:Number = dc.selectedDate.day;
else{
return;
switch(dayOfWeek) {
case 0:
if(sun.selected)
dc.setStyle("selectionColor", newColor);
break;
case 1:
if(mon.selected)
dc.setStyle("selectionColor", newColor);
break;
case 2:
if(tue.selected)
dc.setStyle("selectionColor", newColor);
break;
case 3:
if(wed.selected)
dc.setStyle("selectionColor", newColor);
break;
case 4:
if(thu.selected)
dc.setStyle("selectionColor", newColor);
break;
case 5:
if(fri.selected)
dc.setStyle("selectionColor", newColor);
break;
case 6:
if(sat.selected)
dc.setStyle("selectionColor", newColor);
break;
default:
break;
]]>
</mx:Script>
<mx:VBox horizontalAlign="center" verticalGap="20">
<mx:DateChooser id="dc" textAlign="left"
change="setBackGrdColors(cellColor.selectedColor)"/>
<mx:HBox width="100%" horizontalAlign="center">
<mx:CheckBox id="sun" label="Sun"/>
<mx:CheckBox id="mon" label="Mon"/>
<mx:CheckBox id="tue" label="Tue"/>
<mx:CheckBox id="wed" label="Wed"/>
</mx:HBox>
<mx:HBox width="100%" horizontalAlign="center">
<mx:CheckBox id="thu" label="Thu"/>
<mx:CheckBox id="fri" label="Fri"/>
<mx:CheckBox id="sat" label="Sat"/>
</mx:HBox>
<mx:HBox width="300" horizontalAlign="center">
<mx:Label text="Background Color" />
<mx:ColorPicker id="cellColor"
selectedColor="#FF00FF"/>
</mx:HBox>
</mx:VBox>
</mx:Application>

HT5621 Hi, we have three iPhones and iPods which are currently linked to one apple ID. I have now set up an apple id for each phone/iPod. How do I go about re-directing the two accounts to the relevant one that has now been set up please?

Hi, we have three iPhones and iPods which are currently linked to one apple ID. I have now set up an apple id for each phone/iPod. How do I go about re-directing the two accounts to the relevant one that has now been set up please? I could do with a step by step guide to follow as am worried about loosing aps, music, photo's etc which are on the individual phones.
Thanks
Mandi

On each of the phones you're gonna use a new Apple ID for iCloud: turn off Contacts, Calendars, etc. for iCloud. You'll be prompted to keep the data or delete it from the phone, then turn off iMessage, FaceTime & delete the iCloud account...Settings>iCloud...scroll down...delete account. Then, setup iCloud using the new Apple ID, turn on iMessage & Facetime.
This will have no affect on the ID you share for iTunes content, & you can continue to do so.

How do I set the zoom at a particular level as the default to ensure pages are not too small and that i don't have to change the zoom for each page? in English

How do I set the zoom at a particular level as the default to ensure pages are not too small and that i don't have to change the zoom for each page? in English
== This happened ==
Every time Firefox opened
== From the beginning

Some add-ons:
Default FullZoom: https://addons.mozilla.org/en-US/firefox/addon/6965 (I use this one)
No Squint: http://urandom.ca/nosquint/
Also:
http://support.mozilla.com/en-US/kb/Page+Zoom
http://support.mozilla.com/en-US/kb/Text+Zoom
http://kb.mozillazine.org/Browser.zoom.siteSpecific

How to set up and configure AirPort Express for AirPlay and iTunes

Saw somewhere that supposedly there were some apple written guidlines on the above topic. I have searched all over for them. Anyone know where I can get a copy to read through. Just trying to educate myself a bit and sety up another room with access to itunes, radio, etc with high quality speakers and amp off my express.

Here you go ...
How to set up and configure AirPort Express for AirPlay and iTunes

HT201320 how do you set up and exchange account for google mail

how do you set up and exchange account for google mail

If it's a free gmail account, you don't. Google no longer permits free accounts to be set up using Exchange Active Sync. Only paid google apps accounts can be set up as Exchange accounts.

How to set background and other elements for each page of gallery?

Similar Messages

Maybe you are looking for